Table for plant section field in equipment master.
hi,experts,
can anybody please tell me in which table data of plant section field gets updated? as I m developing one report where I need to pick up data from plant section field in equipment master.
rgds
rajib
Hi,experts,
many many thanks for your response.But whatever table you have given like ITOB,ILOA,or SO61 to SO71,nowhere I am getting my data means plant section field data.I am preparing one safety permit through smart form where I need to pick up data of plant section field .I have used it to for each department where the equipment belongs.please guid me exactly from which table I should pick this data.thnaks in advance
rgds
rajid
Similar Messages
-
What are the master data tables for 'Plant'?
Hi friends,
What are the master data tables for 'Plant' that contain below data?:
PLANT
NAME1
NAME2
LANGUAGE
HOUSE_NUM_STREET
PO_BOX
POSTAL_CODE
CITY
COUNTRY_KEY
REGION
COUNTRY_CODE
CITY_CODE
TIME_ZONE
TAX_JURISDICTION
FACTORY_CALENDAR
Thanks a lot!Hi,
Plz try out following tables for your requirement.
TOO1W
ADRC
J_1IMOCOMP
T001W : werks TYPE t001w-werks, "PLANT
name1 TYPE t001w-name1, "PLANT DESCRIPTION
adrnr TYPE t001w-adrnr, "PLANT ADDRESS NUMBER
ADRC: addrnumber TYPE adrc-addrnumber, "ADDRESS NUMBER
str_suppl1 TYPE adrc-str_suppl1, "STREET2
str_suppl2 TYPE adrc-str_suppl2, "STREET3
street TYPE adrc-street, "STREET
city1 TYPE adrc-city1, "CITY
post_code1 TYPE adrc-post_code1, "CITY POSTAL CODE
post_code2 TYPE adrc-post_code2, "PO Box postal code
tel_number TYPE adrc-tel_number, "TELEPHONE NUMBER
fax_number TYPE adrc-fax_number, "FAX NUMBER
str_suppl3 TYPE adrc-str_suppl3, "STREET4
location TYPE adrc-location, "STREET5
city2 TYPE adrc-city2,
For Tax Details :
J_1IMOCOMP : werks TYPE j_1imocomp-werks,
j_1icstno TYPE j_1imocomp-j_1icstno,
j_1ilstno TYPE j_1imocomp-j_1ilstno,
Hope this will help.
Regards,
Archana -
What to know the master table for the following fields
I want to know the master table for the following fields.
Company code ( BUKRS )
Chart of depreciation ( AFAPL)
Main Asset Number (ANLN1)
Asset Sub Number ( ANLN2 )
Asset Class ( ANLKL )hi,
1) t001 (<b>for assets T093C</b>)
2) t096
3 and 4) anla
5) anka
rgds Andreas
Message was edited by:
Andreas Mann -
What are the standard tables for plant maintenance in r/3
I need the list of standard tables for plant maintenance in r/3. and also
is there any way we can find the field name and table which it belongs to in r/3, based on the description of the field.I NEED THE FIELD NAMES FOR FOLLOWING FIELDS AND CORRESPONDING TABLE NAMES
Equipment status
registration number
insurance type
insurance type description
registration date
expiry date
insurance companies
expiry date
policy number
amount insured
premium paid
created by ..so ..on
for our report in PM .. insurance data report
THANKS -
Use of construction type field in Equipment master
Dear All,
What is the use of construction type field in equipment master and how can i use in plant maintenance processes or transactions
If possible give some examples.Also any one have some document or link related to construction type, kindly provide.
Thanks & Regards,
SandeepConstruction Type is used for identify the equipments having similar construction of materials.
For examples: Identical Mechanical seal used in different pumps.
A BOM can be linked to a technical object in two ways:
By direct assignment: directly assigned BOM
If you create a bill of material directly for a technical object, it is assigned directly. If all the technical objects are identical in terms of structure, the BOM items are valid for all the allocated technical objects.
By indirect assignment: indirectly assigned BOM
For technical objects that have a material BOM - if you enter a material number in the Construction type field of a master record, the material BOM is indirectly assigned to the object. This is a good idea when a company has several identical technical objects grouped under one material number.
Regards
Dhiren -
How can we define plant section field as a authorization object?
Hi Expert
I checked plant section field by t-code S_BCE_68001412( By Field, Text ) and confirm it isn't a authorization object, But in real business we have defined different plant sections and we want to control user actions by this field, how can we get to this point, Pls show me some lights.
Best regards
GeorgeGeorge,
You could potentially achieve the same with the help of the "Authorization group" field on the equipment master.You could create Authorization groups equivalent to plant sections and assign the same to the equipment master, whenever the plant section is populated. You could then use the standard Auth object "I_BEGRP Authorization group" to control the access to that specific record.
Regards
Narasimhan -
Dropdown in Manufacturer field in Equipment Master
Hi Experts
Manufacturer (HERST) field in Equipment master(IE01) is free text field of 30 characters.
We want to add dropdown to this field so that we could validate/select values to this field.
Is there a user exit or easy way to achieve this. I found a user exit IEQM0007 but it does not add a dropdown.
Your thoughts.
Thanks
GauravGaurav:
I saw this before. Actually, we pu a dropdown not only for the manufacturer, but also for the model. The problem is that i don't remeber wich u.e we used, but it's quite not difficult to abap programmer tracing it. Perhaps it could modify the field type, replacing it for some one with the dropdown propertie. You will have to use an Z table (and maintain it), so consider that also
Hope this help.
Ezequiel -
Use of Sort Field in equipment Master
Dear All
What is the use of SORT field in Equipment Master RecordDear Kumar Sahoo,
This field is for identification purpose and generally give similar technical objects
example:if you have so motors like lathe and drilling and lifting and milling etc thease all motors are same motors and if you want see the list you can give sor name then see, otherwise you have to give each number and find out
some more benefit is you can list sorting and unic identification of similar objects
generally using internal purpose, i mean there is no relation of external procurement or warranty or any outside of company activiteis.
Hope this may helps you
Prem -
Po number field in Equipment Master
Hi All,
Can you tell me how i can include two fields in Equipment Master.
1. For PO Number
2. Po Line Item Number.
If there is no standard field, can you please tell me if there is any Additional Fields that i can use for PO number and Line Item number pls.
Also the Equipment Valid Date field needs to be changeable. Can you please advise a way to make this Field ITOB-DATBI changeable.
Thanks
ArunHi,
If you want PO and PO Line item to be included in the Equipment, you can create Characterics called Purchase Order and PO Line Item and then assign these characteristics to an equipment class (create one if you do not have an existing equipment class).
Assign this Class to all the equipment you want, then you can input the PO and PO line items values into the characteristics.
Cheers,
Joey -
Table for TDS sections and its description
Hi,
Is there any table where both TDS section and its description is getting stored? If this is possible can we relate the same to Vendor through any link?
Thanks & Regards,
TapanHI
J_1ITDSSEC is the table for TDS section and description.
TDS sections will be assigned to tax codes, so you can link through tax codes whatever is assigned to a vendor.
Relation will be -- Vendor-- Taxcode--tDS section.
Cheers
Mukta -
Find table for a structure field
Hi,
I need to find table for field Q0743-OFFR1. I tried using tcode SE15, but was not able to find any table where the field is used.
Is there any other method of finding a table for a structure field.
Any pointers in this regard would be helpful.
Thanks,
SaherHi,
when u open the structure , u will find the tab " Component " in that you
will find "Data Element" column which hold the data element of the structure
component , now double click on the respective "Data Element " and that will
open up the Data Element Page in which u will find a "Where Used List" icon
, click on that, this will now display you the list, select the TABLE LIST
Check box and execute, which will subsequently display you all the the table
names which has "specified" data element's component as field
Hope this will Help you.
Regards,
Kiran -
Hi,
What is the table for plant details on Material Basis?
ThanksHi,
MARA General Material Data
MARC Plant Data for Material
MARD Storage Location Data for Material
Reward of helpful -
Table for user status field in CJ20n transaction project defination
HI ALL,
what is table for user status field in CJ20n transaction project defination creation. This field is in Basic Data tab.
Thanks.Hi,
Check following tables for Usre status:
TJ30 - User status
TJ30T - Texts for user status
TJ20 - Status profile
JEST - Object status
JSTO- WBS status profile.
Check this code:
REPORT zps_get_userstatus .
PARAMETERS: p_posid LIKE prps-posid.
*-- Constants
CONSTANTS: gc_yes(1) TYPE c VALUE 'X',
gc_no(1) TYPE c VALUE ' '.
*-- Variables
DATA: l_objnr LIKE prps-objnr.
*-- Internal tables
DATA: BEGIN OF lit_jest OCCURS 0,
objnr LIKE jest-objnr,
stat LIKE jest-stat,
END OF lit_jest.
DATA: BEGIN OF lit_jsto OCCURS 0,
objnr LIKE jsto-objnr,
stsma LIKE jsto-stsma,
END OF lit_jsto.
DATA: BEGIN OF lit_status OCCURS 0, "Combination of JEST & JSTO
objnr LIKE jest-objnr,
stsma LIKE jsto-stsma,
stat LIKE jest-stat,
END OF lit_status.
DATA: BEGIN OF lit_usrsta OCCURS 0, "Uer status for all wbs
objnr LIKE jest-objnr,
stsma LIKE jsto-stsma,
stat LIKE tj30t-estat,
txt04 LIKE tj30t-txt04,
END OF lit_usrsta.
DATA: BEGIN OF lit_usrtxt OCCURS 0, "User Status text - TJ30T
stsma LIKE tj30t-stsma,
stat LIKE tj30t-estat,
txt04 LIKE tj30t-txt04,
END OF lit_usrtxt.
* get WBS object number
SELECT SINGLE
objnr FROM prps
INTO l_objnr
WHERE posid = p_posid.
* get WBS active status from table JEST
SELECT
objnr
stat
FROM jest INTO TABLE lit_jest
WHERE objnr = l_objnr AND
inact <> gc_yes.
* get WBS status profile from table JSTO
SELECT
objnr
stsma FROM jsto
INTO TABLE lit_jsto
WHERE objnr = l_objnr.
* combine JEST and JSTO table for user status
LOOP AT lit_jest.
IF lit_jest-stat CP 'E++++'.
READ TABLE lit_jsto WITH KEY
objnr = l_objnr.
IF sy-subrc = 0.
lit_status-objnr = lit_jest-objnr.
lit_status-stsma = lit_jsto-stsma.
lit_status-stat = lit_jest-stat.
APPEND lit_status.
ENDIF.
ENDIF.
CLEAR: lit_jsto, lit_status.
ENDLOOP.
* get text for user status
SELECT DISTINCT
stsma
estat
txt04 FROM tj30t
INTO TABLE lit_usrtxt
FOR ALL ENTRIES IN lit_status
WHERE stsma = lit_status-stsma AND
estat = lit_status-stat AND
spras = sy-langu.
Let me know if you have any question.
Regards,
RS -
Table for description of field name.
Hi,
Want to know is there any single table which stores all the Technical field names used in SAP Vs Description of these fields...?
Like WERKS = PLANT.
This doubt has come because there is table "TSTC" for" T. codes". Similarly, there may be table for field description as well, is my opinion.
Thanks & Regards,
SivaHi
From the field you need to indentify the domain in se11, then you can goto se16, table name is DD01T
DOMNAME = domain name
DDLANGUAGE = language
you can Identify the text
For table short texts you can refer table - DD02T
Thanks !
E.Avudaiappan -
Table for Sales datas assinged to Equip/Floc
Hi
I need a table for Sales datas like sales org,distribution channel,divition,sales office,sales group assigned to equipment master,
Points assured
Thanks
Seenuhi seenu
yes you are wright the sales organisation, DC,Divison is strored under the ILOA table only , since in equipment its being picked from the view table,you can interrelate with FL and equipment
regards
thyagarajan
Maybe you are looking for
-
Photoshop CS4 crashing inexplicably, frequently
Photoshop CS4 (v.11.0.2) started crashing on me periodically last summer. It's my only application behaving this way. I don't have any recent plug-ins. I've run Disk Utility (as I do several times a month, as a matter of course). I'm using the same s
-
I've read that AMERICAN_AMERICA.AR8MSWIN1256 supports both Arabic and Latin. When I insert data from .NET to Oracle, accented spanish characters are being replaced by question marks. Does AMERICAN_AMERICA.AR8MSWIN1256 support spanish or I'm missing s
-
Download iChat and Mail?
iChat and Mail failed. I think that I need to reinstall them, but couldn't find them Apple.com. Should I reinstall the entire OS? Unfortunately, due to hardware upgrade, the original DVD cannot be used. It ok to buy new one, but Snow Leopard is aroun
-
How to transfer tags from Elements to Bridge?
I have been using PSE 11 to organize and access my photos. I find that with both PSE and PSCC running at the same time everything slows down. I am going to try using Bridge instead of PSE and wonder how I can transfer the organizing tags from PSE t
-
I wonder if anybody out there can help me. I need to add a new tab to the search help for VBAK-VBELN (Sales Order Number). The Search help name is called VMVA. How do I go about doing this?