Table for selection ID

Hi Experts,
We have one requirement to find out which auther created a particular selection ID on which date & the selection ID with which last changes were made in that selection ID.
We have table /sapapo/t445selt which has this information but its not bringing up all the selection ID in the system.
Can you please help us?
Thanks in Advance.
Regards
Sujay

Hi Sujay,
have a look at /SAPAPO/TS_SELKO
Another important table for selection: /SAPAPO/TS_SELPO
Regards
Julien

Similar Messages

APO DP - use of tables for selections and notes

I am using APO DP V5.
I note that tables for holding selections and notes are planning area specific and have tables names such as /1APO/S1nnnnnnnn and /1APO/F1nnnnnnnn respectively.
My questions:
1. What is the logic for the naming of these tables
2. For a given planning area, are the tables names the same as one moves from Development to QA to Production environments
Thanks,
Bob Austin

Bob
I think the answer for the notes part of this question is here. The logic for the selections should be the same
Re: Updating of Notes for cells in APO DP
The table names might not be the same in QA since they are created independently and dynamically. But one way to check is to try it out

How to set column widths in tables for selected table only, not globally throughout document?

I've been utilizing the below script (thank you so much Ramkumar. P!) to set column widths throughout a sizable InDesign book with tables on every page and it is truly a time saver. At this point in time, I have three versions of it because there are different column widths throughout the book. Is it possible to augment the script to run only on a selected text frame (containing a table)? If so, would someone be kind enough to share the augmented script with me? I've been trying to figure out this seemingly simple change through trial and error with no success as yet. I realize this is a totally newbie request and I'm entirely at the mercy of the kindness of the Javascript gods that contribute within this forum. Seeing that in a different post related to this script, one such guru responded to a request as simple as "Where do I put the scripts in InDesign" gave me enough courage to ask for some help! Thank you in advance to anyone willing to provide a solution.
var myDoc = app.activeDocument;
     var myWidths = [100, 100, 150, 150];
     for(var T=0; T < myDoc.textFrames.length; T++){
         for(var i=0; i < myDoc.textFrames[T].tables.length; i++){
             for(var j=0; j < myWidths.length; j++){
                 myDoc.textFrames[T].tables[i].columns[j].width = myWidths[j];
     alert("Table width updated successfully...");

Hello all
I have the same problem in that I'm not a scripting person, but was able to get the above script working without problem, and it does set irregular table column widths perfectly, so thanks to Ramkumar. P for that.
BUT, it changes the column width for ALL tables in the document, whereas I would like to just target the selected table.
Any ideas as to how I might amend this script to achieve this?
Thx, Christian

How to correctly apply index to table for select optimization

i have the table
create table [dbo].[DatasetsIndex]
[ID] [int] IDENTITY(1,1) NOT NULL,
[postcode] [char](16) NULL,
[city] [nvarchar](255) NULL,
[country_code] [char](2) NULL,
CONSTRAINT [PK_DatasetsIndex] PRIMARY KEY CLUSTERED
[ID] ASC
and select query
select * from
[dbo].[DatasetsIndex] where city
LIKE N'".$locality."%' and country_code='US'
so always i should find city for country.
How to optimize the table to speed up query. Now i have a lot of rows and query time is 5 seconds. Which index will be optimal ?

please don't use "select *" in your query, select only required column in your select query,
Assuming you are going to get postcode in select, the query can be.
select city,postcode from
[dbo].[DatasetsIndex] where city
LIKE N'".$locality."%' and country_code='US'
then the cover index may look like.
Create index idx_City_countrycode on [DatasetsIndex]([city],[country_code])
include ([postcode])
Thanks
Saravana Kumar C

Create object type from multiple tables for select statement

Hi there,
I have 3 tables as given below and I wish to create an object type to group selected columns as 'attribute' from multiple tables.
I need to create 2 input parameters to pass in - 'attribute' and 'attribute value' in PL/SQL and these 2 parameters will be
passing in with 'column name' and 'column value'. e.g. 'configuration' - the column name, 'eval' - the column value.
Then, the PL/SQL will execute the select statement with the column and column value provided to output the record.
Pls advise and thank you.
table ccitemnumber
name                           null     type
ccitemnumber                   not null varchar2(20)
configuration                           varchar2(20)
item_type                               varchar2(30)
table productmodel
productmodelnumber             not null varchar2(6)
description                             varchar2(60)
accesstimems                            number
numberofheads                           varchar2(2)
generation                              varchar2(10)
numberofdiscs                           varchar2(2)
factoryapplication                      varchar2(150)
table topmodel
stmodelnumber                  not null varchar2(30)
productfamily                           varchar2(60
formfactor                              varchar2(10)
modelheight                             varchar2(10)
formattedcapacity                       number
formattedcapacity_uom                   varchar2(20)
object type in database
configuration                           varchar2(20)
item_type                               varchar2(30)
numberofheads                           varchar2(2)
generation                              varchar2(10)
numberofdiscs                           varchar2(2)
factoryapplication                      varchar2(150)
modelheight                             varchar2(10)
formattedcapacity                       number
formattedcapac

user12043838 wrote:
Reason to do this as these fields are required to be grouped together as they are created in different tables. They are treated as 'attribute' (consists of many columns) of the part number. So, the PL/SQL is requested to design in a way able for user to pass in the column name and column value or part number, then the select statement should be able to query for the records. Another reason is a new column can be added easily without keep modifying those effected programs. Reuseable too.This basically equates to ... hard to code, hard to maintain, and poor performance.
Are you really sure you want to do this? This isn't going to be easy-street as you seem to think it is, but it's a one way street to a poorly performing system with security vulnerabilities (google SQL Injection).
I would highly recommend you reconsider your design decision here.

Table for Selection condition

Hi Experts,
Is there a table(s) where I can view the "Selection Condition" / "Filter" / "Restrict" on my all my BW Queries? If so, please let me know the table name(s).
Currently I am checking RSZRANGE table

Hi,
it is a combination of 3 tables,which are
Use a join on 3 tables RSZRANGE, RSZELTXREF & RSRREPDIR...
You can get all the hard coded values etc....
Thanks,
Teja

Open sys_refcursor for select from table variable?

Hi,
I've got a challenge for you! :-)
I've got a procedure that has a lot of logic to determine what data should be loaded into a table variable. Because of various application constraints, i can not create a global temporary table. Instead, i'd like to create a table variable and populate it with stuff as i go through the procedure.
The end result of the procedure is that i must be able to pass the results back as a sys_refcursor. This is a requirement that is beyond my control as well.
Is there a way to make this sort of procedure work?
Create Or Replace Procedure Xtst
Mu_Cur In Out Sys_Refcursor
Is
Type Xdmlrectype Is Record (Col1 Varchar2(66));
Type Xdmltype Is Table Of Xdmlrectype;
Rtn Xdmltype;
Begin
Select Internal_Id Bulk Collect Into Rtn From Zc_State;
open mu_cur for select col1 from table(rtn);
end;
11/42 PLS-00642: local collection types not allowed in SQL statements
11/36 PL/SQL: ORA-22905: cannot access rows from a non-nested table item
11/19 PL/SQL: SQL Statement ignored
Show Errors;

Not anything i'd want to personally implement.
But for educational purposes only of course....
create table this_will_be_gross
   column1 number,
   column2 varchar2(30)
insert into this_will_be_gross values (1, 'begin the ugliness');
insert into this_will_be_gross values (2, 'end the ugliness');
variable x refcursor;
ME_XE?
declare
   Rtn sys.ODCIVARCHAR2LIST;
BEGIN
   SELECT
      column1 || '-' || column2 Bulk Collect
   INTO
      Rtn
   FROM
      this_will_be_gross;
   OPEN :x FOR
   SELECT
      regexp_substr (column_value, '[^-]+', 1, 1) as column1,
      regexp_substr (column_value, '[^-]+', 1, 2) as column2
   FROM TABLE(CAST(rtn AS sys.ODCIVARCHAR2LIST));
end;
17 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.09
ME_XE?
ME_XE?print :x
COLUMN1                        COLUMN2
1                              begin the ugliness
2                              end the ugliness
2 rows selected.
Elapsed: 00:00:00.11In the above example i 'knew' that a hypen was a safe character to use to break up my data elements (as it would not be found anywhere in the data itself).
I would strongly encourage you not to implement something like this. I realize it's tempting when you are working in strict environments where it can take a serious battle to get structures like temporary tables or SQL Types created, but that's really the proper approach to be taking.

How to see the dropdown option for field of a table during selection

Hello,
I am adding a new custom field in the table. Now when user goes to the screen after clicking the content button icon in se11, he sees all fields for selection.
That custom field is one character field. I want the user to see P and S option when he hits F4 (Dropdown).
How can I achieve this ?
Regards,
Rajesh.

hi check this..
report .
TYPE-POOLS : vrm.
TABLES:vbak,vbap.
DATA : v(80) TYPE c.
DATA: wa_vbak TYPE vbak,
      it_vbak TYPE vbak OCCURS 0 WITH HEADER LINE,
      wa_vbap TYPE vbap,
      it_vbap TYPE vbap OCCURS 0 WITH HEADER LINE.
DATA: l_name TYPE vrm_id,
        li_list TYPE vrm_values ,
        v_count TYPE i,
        l_value LIKE LINE OF li_list.
PARAMETERS: p_test(20) AS LISTBOX VISIBLE LENGTH 60 MODIF ID DAT.
INITIALIZATION.
AT SELECTION-SCREEN OUTPUT.
PERFORM get_data.
LOOP AT it_vbak.
    l_value-key = it_vbak-vbeln .
    l_value-text = it_vbak-vbeln .
    APPEND l_value TO li_list.
ENDLOOP.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id              = 'P_TEST'
      values          = li_list
    EXCEPTIONS
      id_illegal_name = 1
      OTHERS          = 2.
AT SELECTION-SCREEN ON P_TEST.
clear : li_list , li_list[].
SELECT vbeln
         matnr
         meins
         FROM vbap
         INTO CORRESPONDING FIELDS OF TABLE it_vbap
         WHERE vbeln = p_test.
START-OF-SELECTION.
SELECT vbeln
         matnr
         meins
         FROM vbap
         INTO CORRESPONDING FIELDS OF TABLE it_vbap
         WHERE vbeln = p_test.
LOOP AT it_vbap.
    WRITE :/ it_vbap-vbeln, it_vbap-matnr,it_vbap-meins.
ENDLOOP.
*&      Form get_Data
      text
--> p1        text
<-- p2        text
FORM get_data .
SELECT vbeln
          FROM vbak
          INTO CORRESPONDING FIELDS OF TABLE it_vbak.
ENDFORM.                    " get_Data
regards,
venkat

Restrict number of characters in table field for select statement.

SELECT * FROM table
                WHERE column1 = z-column.
The field column1 is of type char and size 20
The field z-column is of type char size 10.
how do we perform this select?
Anyone can guide me?
Edited by: Hadesfx on Sep 11, 2009 3:56 PM
Edited by: Hadesfx on Sep 11, 2009 3:59 PM

Hello,
In your OP did you mention this? Please be specific when you post the next time.
Can you please post your code?
I think you have to try a work around:
DATA:
RS_STOCKID TYPE SELOPT,
RT_STOCKID TYPE STANDARD TABLE OF SELOPT.
LOOP AT GT_ZB1PUT_STOCKTMP.
RS_STOCKID-SIGN = 'I'.
RS_STOCKID-OPTION = 'EQ'.
RS_STOCKID-LOW = GT_ZB1PUT_STOCKTMP-STOCKID.
APPEND RS_STOCKID TO RT_STOCKID.
CLEAR RS_STOCKID.
ENDLOOP.
You can use this RANGE table to SELECT data from the table.
SELECT * FROM zb1xxt_param
            FOR ALL ENTRIES IN gt_zb1put_stocktmp[]
            WHERE zzcode    = 'DEV036'
            AND   zzdomain = 'SD'
            AND   zzdata    = 'INBOUND'
            AND   zzinput1 = 'STOCKID'
            AND   zzinput2 IN RT_STOCKID. "Use RT_STOCKID for SELECT'ing data
BR,
Suhas

Designing a table for high rate of concurrent inserts and selects...

I am looking for some recommendations on designing a table the will be inserted into from both nodes of a 2 node cluster quite heavily during peak hours when we are taking alot of orders. We are an online store and we are designing a table that will be used to hold product sku's for items that are placed in a shoppers cart at the same time and then we plan to use this table as a way of subtracting the inventory in this table as a minus in a view of our true nventory quantities?
Not sure if that was clear but basically this table will be getting hit heavily for inserts and at the same time we will be using the data in the table to select from it so we can subtract the shu's that exists in the table.
I am looking for techniques that maybe some of our guru's have implemented in this type of design in a rac environment that will help in the conncurrency that we are expectiing.
Should I be building my tables with the smallest block size available as to avoid hot block in the db buffer cache and also we are using a sequence to generate and ID on the table and I have set a large cache size on the sequence (5000).
We are planning on using ASSM table spaces with auto extent and segment space management as everthing we have read indicated that this is the best type of tablespace mgmt in RAC.
What other factors should I be considering.
any help or suggestions are greatly appreciated.
Thanks in advance.

user520056 wrote:
I am looking for some recommendations on designing a table the will be inserted into from both nodes of a 2 node cluster quite heavily during peak hours when we are taking alot of orders. We are an online store and we are designing a table that will be used to hold product sku's for items that are placed in a shoppers cart at the same time and then we plan to use this table as a way of subtracting the inventory in this table as a minus in a view of our true nventory quantities?
Not sure if that was clear but basically this table will be getting hit heavily for inserts and at the same time we will be using the data in the table to select from it so we can subtract the shu's that exists in the table.
I am looking for techniques that maybe some of our guru's have implemented in this type of design in a rac environment that will help in the conncurrency that we are expectiing.
Should I be building my tables with the smallest block size available as to avoid hot block in the db buffer cache and also we are using a sequence to generate and ID on the table and I have set a large cache size on the sequence (5000).
We are planning on using ASSM table spaces with auto extent and segment space management as everthing we have read indicated that this is the best type of tablespace mgmt in RAC.
What other factors should I be considering.
any help or suggestions are greatly appreciated.
Thanks in advance.See my .sig for other questions you should answer - OS, DB (version &c.),
CPU/RAM/Disk...
If you're running this on a 386 with 16 MB of RAM with on HDD, then you could
have problems - if you're running it on something different, well that changes
the possible answers.
Paul...
When asking database related questions, please give other posters
some clues, like OS (with version), version of Oracle being used and DDL.
Other trivia such as CPU + Disk configuration might also be useful.
The exact text and/or number of error messages is useful (!= "it didn't work!"). Thanks.
Furthermore, as a courtesy to those who spend time analysing and attempting to help,
please do not top post and do try to trim your replies!

Lock the table by user with grant only for select

Hallo.
It is possible that the user has rights only for SELECT, do not lock the table? Now, where do "SELECT * FROM table FOR UPDATE", does not make the change, but it locks the entire table, and another user to get into it.
Thanks

And here is the "evidence" ;)
SQL> select * from v$version ;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE    10.2.0.4.0      Production
TNS for Solaris: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
SQL> create user u1 identified by u1 ;
User created.
SQL> grant connect to u1 ;
Grant succeeded.
SQL> connect hr/hr
Connected.
SQL> create or replace view v_t1 as select username, user_id, created from t1 group by username, use
r_id, created with read only ;
View created.
SQL> grant select on v_t1 to u1 ;
Grant succeeded.
SQL> connect u1/u1
Connected.
SQL> select * from hr.v_t1 where rownum = 1 for update ;
select * from hr.v_t1 where rownum = 1 for update
ERROR at line 1:
ORA-02014: cannot select FOR UPDATE from view with DISTINCT, GROUP BY, etc.
SQL> select * from hr.v_t1 where rownum = 1
2 ;
USERNAME                          USER_ID CREATED
AK                                     36 08-MAY-00

Driver table in select for all entries

anyone please let me what is driver table in select for all entries and when do we go for select for all entries

Here is something from help
FOR ALL ENTRIES WHERE
Syntax
... FOR ALL ENTRIES IN itab WHERE ... col operator itab-comp ...
Effect
If the addition FOR ALL ENTRIES is specified before the language element WHERE, then the components comp of the internal table itab can be used as operands when comparing with relational operators.
The internal table itab must have a structured line type and the component comp must be compatible with the column col.
The logical expression sql_cond of the WHERE condition can comprise various logical expressions by using AND and OR. However, if FOR ALL ENTRIES is specified, there must be at least one Comparison with a column of the internal table itab, which can be specified either statistically or dynamically (Release 6.40 and higher). In a statement with a SELECTstatement with FOR ALL ENTRIES, the addition ORDER BY can only be used with the addition PRIMARY KEY.
The whole logical expression sql_cond is evaluated for each individual line of the internal table itab. The resulting set of the SELECT statement is the union of the resulting sets from the individual evaluations. Duplicate lines are automatically removed from the resulting set. If the internal table itab is empty, the whole WHERE statement is ignored and all lines in the database are put in the resulting set.
Notes
In Release 6.10 and higher, the same internal table can be specified after FOR ALL ENTRIES and after INTO.
The addition FOR ALL ENTRIES is only possible before WHERE conditions of the SELECT statement.
Example
Exporting all flight data for a specified departure city. The relevant airlines and flight numbers are first put in an internal table entry_tab, which is evaluated in the WHERE condition of the subsquent SELECT statement.
PARAMETERS p_city TYPE spfli-cityfrom.
TYPES: BEGIN OF entry_tab_type,
         carrid TYPE spfli-carrid,
         connid TYPE spfli-connid,
       END OF entry_tab_type.
DATA: entry_tab   TYPE TABLE OF entry_tab_type,
      sflight_tab TYPE SORTED TABLE OF sflight
                       WITH UNIQUE KEY carrid connid fldate.
SELECT carrid connid
       FROM spfli
       INTO CORRESPONDING FIELDS OF TABLE entry_tab
       WHERE cityfrom = p_city.
SELECT carrid connid fldate
       FROM sflight
       INTO CORRESPONDING FIELDS OF TABLE sflight_tab
       FOR ALL ENTRIES IN entry_tab
       WHERE carrid = entry_tab-carrid AND
             connid = entry_tab-connid.
Regards,
Santosh

Table list for select statment

hello all,
I been trying to setup a plsql statment to run a select statment from tables that are in a list.
this is what I have done so far as a test and it is not letting me do it and I don't know why can anyone point me in the right direction.
declare
cursor main_log is
select *
from joseph_w.table_name_list;
cml main_log%rowtype;
var1 varchar2(35);
var2 varchar2(35;
begin
open main_log;
fetch main_log into cml;
var1 := cml.schema_name;
var2 := cml.table_name;
select *
from var1.var2;
close main_log;
end;
thanks

In PL/SQL you cannot just "select", as PL/SQL is a server sided language. You must use a record or variable to hold the selected data. Anyway, for selecting from different tables dynamically, you can use (Native) Dynamic SQL or Ref Cursors. Take a look at the documentation, especially the "PL/SQL User's Guide and Reference":
http://www.oracle.com/pls/db102/portal.portal_db?selected=1
Regards,
Gerd

Select Tables for reduction

Hi ,
in step "Select Tables for Reduction" , each table has to be selected one- by- one for reduction.
Is there any functionality to select more than ONE tables starting with Custom Name Space and mark them for "NO Transfer" ?
Possibly with help of maintenance view, table behind above logic can be used...
any input appreciated...let me know if need more explanation...
thank you !
Regards, Santosh

Hi,
This functionality was developed in order to cater to all 3 requirements i.e.
a. The customer may choose to transfer some tables in full -> There are some tables which cannot be set to Full Transfer. So in order to do this verification, it becomes necessary to run a check on the chosen table when the user selects that table which is only possible on choosing one table at a time.
b. Change the reduction criteria for a table -> Now, here we may have differnet reduction criterias / Selection Groups for a single table. This identification of selection groups too is only possible on a table to table basis.
c. Set a table to No Transfer -> Let us assume a situation where we have parent - child relationship between 2 tables. In case the parent was set to "No Transfer" via a maintainence view, then it would result in no data being transferred for the child table either. This inturn might lead to further inconsistencies. Thus, in order to be on the safe side, we have to do it one table at a time currently.
So keeping in mind all the 3 requirements and to maintain simplicity, this was the approach chosen.
Also, we would also like to inform you that this requirement has been taken up with high priority for the new release of TDMS (i.e. TDMS 4.0 which is scheduled to be released next year) and have already started working on arriving at a solution keeping in mind all the above limitations.
Thanks & Regards,
Suman

Last Accessed Date of Tables (including SELECT) for Oracle 8 DB clean-up

Hi all,
I am assigned the task of listing out tables in a large database which are not used anymore. Is there a way by which we can find the last accessed date of the tables (including SELECT access) so that it would ease my task of finding out used tables?
Your comments on LogMining for Oracle 8.0 and AUDIT on Production DB are welcome
Many Thanks,
Ravi

Hi all,
I am assigned the task of listing out tables in a large database which are not used anymore. Is there a way by which we can find the last accessed date of the tables (including SELECT access) so that it would ease my task of finding out used tables?
Your comments on LogMining for Oracle 8.0 and AUDIT on Production DB are welcome
Many Thanks,
Ravi

Table for selection ID

Similar Messages

Maybe you are looking for