Table for Statuses for system and User

Hi Experts,
Could any one know me the tavles related and also CRM_JEST.
Madhavika

Hello MCG ,
Below are the tables for statues:-
BS02                 Maintain status profiles
BS03                 Display status profiles
BS12                 Maintain object types
BS13                 Display object types
BS22                 Maintain system status
BS23                 Display system status
BS32                 Maintain processes
BS33                 Display processes
BS42                 Maintain Status Selection Profiles
BS43                 Display status selection
BS52                 Maintain authorization key
BS53                 Display authoriztaion key
Thanks
Pooja

Similar Messages

How do I set one monitor calibration for the whole system and users?

I'm really angry because when I logged into my first default account, My settings where normal, but I logged into my alt account, the settings where all messed up (NO ONE TOUCHED MY COMPUTER, AND THE ACCOUNT HAS A STRONG PASSWORD) The white balance was that slightly blue one. So, I changed it, and logged in to the alt account again to see it was okay. I want to my main account and used screenlock, and noticed on the login screen (I logged out of the account after I saw to see this same thing) it was the light bluer white balance. So I logged in and calibrated AGAIN and it finally when back to the default on the login screen (2:2 or something and native white balance) and my preferences for my accounts (television gamma, and native white balance) I just want it system wide to be:
-2:2 TELEVISION GAMMA
-Native White Gamma
Or at-least the login screen, and my two accounts, and that settings to be the system wide default.

Thanks for helping me make it worse.
First off, if you want help, act like an adult. We're all just other users you're talking to, not Apple employees. Such angry behavior will only ensure that no one will respond to any questions by you in the future.
Second, there's nothing wrong with Kappy's advice. The /Library/ColorSync/Profiles/ folder is accessible by all user accounts. So putting one common monitor profile there and setting it in each account is what you want to do.
What you're seeing is a known issue when switching users without restarting. I don't know if there's ever been a true solution for it.
One of many articles on the subject:
http://www.macosxhints.com/article.php?story=20060103162354164
I know the linked article is about Tiger, but the bug persists through Leopard.

System and user status to BW

Hi all,
I need to bring system and user statusses to BW (for wbs-elements and cs/pm orders). I'm fairly new to BW and I cannot find any business content regarding statusses. I have varying reporting needs where these statusses are important. Are there any pitfalls in bringing jest and jcds tables to BW. What would be the most logical place to put this information in: ODS-object or infocube? I want to do an initial full load of all these objects with their current status and status history. After that, I want to weekly load the delta's.
Any help would be greatly appreciated.
Ciao,
Peter

Hi Peter and welcome to the SDN!
well depending on your needs, you can extract all status information coming from jest and/or jcds, tj02 and/or tj30 using generic extraction and posting it into a ODS firstly. Additionally please check note 300300 from SAP. It describes how to add the status information to infoobjects.
regards
Siggi

Logistic system and user statuses

We process PM system and user statuses extensively. Currently we use a custom extract of table JCDS to an InfoObject with a filter set on UDate (creation date).
     We use PM status information so extensively that I expect there is some standard SAP Business Content that would satisfy this data need. For example in the newly released industry Defense Forces & Public Security business content there is a Master Equipment Status infoset for the evaluations of the status of master equipment.
     Does anyone have any suggestions on the best practice for processing logistic statuses in BW?
     Thank you very much for you time.

Malissa,
Just a different thinking to see, whether we can get some clues.
I would suggest you get into the order in the change mode, try some minor changes may in terms of operation text etc...and try to save the order. if there are some missing stuff, I am sure now SAP would throw out the error lets take the leads from there on.
Regards,
Prasobh

System and User Statuses Missing

Hi All,
Does anyone know what causes the system and user statuses to disappear on the main screen of the production order. Normally we see all system statuses and the current user status like this:
Status CRTD PRC CSER BCRQ MANC SETC REL
User Status ERR
Some configuration must have changed because even though the statuses are in JEST, they are not displayed on the order.
Status
User Status
Thanks for the help,
Malissa

Malissa,
Just a different thinking to see, whether we can get some clues.
I would suggest you get into the order in the change mode, try some minor changes may in terms of operation text etc...and try to save the order. if there are some missing stuff, I am sure now SAP would throw out the error lets take the leads from there on.
Regards,
Prasobh

Displaying Work Order System and User Statuses in IW37 Search

I'd like to display the work order header system and user statuses along with the operation system and user statuses in an IW37 search but couldn't find an entry as such in the IW37 'change layout' dialog box.
David Macindoe

David Macindoe,
That Order header information isn't available in IW37 report.You may have to use IW37N report or enhance /copy IW37 report to get this information.
Regards
Narasimhan

So I downloaded the wrong Airplane Mode program for my operating system and I now have AppleScript Error message. It will not allow me to quit the program. Also, once that happens how do I remove the program from the computer?

So I downloaded the wrong Airplane Mode program for my operating system and I now have AppleScript Error message. It will not allow me to quit the program. Also, once that happens how do I remove the program from the computer?

What Airplane Mode program? To stop a running program launch Activity Monitor (in utilities folder) and quit the program from there. To remove the program drag it to the trash or better use the uninstaller that should have come with it.

MBP 2011 15 late edition: missing HD space - hd shows usage to be 237 gb, but if adding up amount used by adding up apps, library, systems and users only 65 gb of use shows up?

MBP 2011 15 late edition: Missing HD space - HD shows usage to be 237 GB. Adding up usage by apps, libriary, system and users shows usage to be 67GB. Help

"Hacked" is not my terminology, and I don't believe it's intended to be derogatory. What you describe is a perfectly legitimate reason to alter Hosts.
If your Mac still isn't working as expected after uninstalling Intego and Trend Micro, read on. The necessity to have a reliable backup cannot be overstated, since what you describe may be an indication of impending disk failure.
Back up your Mac if you have not already done so. To learn how to to that read Mac Basics: Time Machine backs up your Mac - Apple Support
If your Mac is momentarily unresponsive, consider the following.
Launch the Console app - it is in your Utilities folder. You can find it by selecting Utilities from the Finder's Go menu.
If the log list column on the left is not already displayed, show the log list by selecting Show Log List from Console's View menu. Select Show Toolbar if it is not already shown.
Locate system.log in the list and select it. Many date and time-stamped entries will appear, hundreds of them, and you must find the entries relevant to your Mac's problem.
To do that click the Clear Display button in the Toolbar. All previously displayed log entries will be disappear.
Next: Perform whatever actions cause the Mac to exhibit the slow behavior. If the problem is caused by errors logged by the system, the Console window will show them being recorded in system.log.
One or more of them, along with their time stamps, may reveal the reason for the problem you describe.
Copy and paste those log entries in a reply. If hundreds of the same repetitive messages appear, please edit them before posting. There should be no need for more than a few log entries.
Most of the entries will be cryptic but will contain information you might consider personal such as your Mac's name. If you do not want that information to appear, delete or obscure it when posting your reply. Leave enough information so that the entries can be deciphered.

Centralised EHS system and users and organisations in multiple SAP systems

Wanted to have your experience/ advice or experience in setting up a centralised EHS system talking to multiple SAP systems and other ERP systems
If the client have sister companies and locations in multiple SAP systems , can we go for a centralised EHS system talking to multiple SAP systems
Is there a concept of application ID in EHS system : If so how EHS system can identify the < to EHS system records to tag the system > , <EHS system Records bound to have different configs for each ERP systems> and < from EHS system records to multiple SAP systems >
Can you list client experiences or roadblocks for this type of design

Hello
the answer to your question is: may be you can use a central EHS system. The reason is: EHS is correlated with MM. A SAP system in which EHS is used without MM makes "not realy" sense. So it is a matter of definition "what is a central EHS system".
EHS it selfs uses SAP standard techniques. That is "ALE" distribution to other SAP systems. The distribution of EHS data top NON SAP systems is possible to via XI (which is the common solution). If you use as the scenario SAP to SAP you must make your that standard EHS customizing is the same on both sides.
Furthermore SAP EHS is a "great" module with several submodules. So regarding each of the potential scenerios you need to check the necessary prerequisites. It ois very common to have EHS PS, DG, HSM in one system and to distribute data via ALE to a different system so that the EHS data can be used "decentral" in the several SAP logistic processes.
In most cases you need to distribute per ALE at least DG master and hazardous substance master.
As a starting point take a look here: http://help.sap.com/erp2005_ehp_05/helpdata/en/c1/eda0f591ec12408b25e7a1b369ca45/frameset.htm
BASIC Data and Tools => Tools => Distribution of specifications, phrases and reports per ALE.
Hope this helps.
With best regards
C.B.

0NOTIFICATN_ATTR datasource - how it get the system and user status

Guys,
I have 0NOTIFICATN_ATTR datasource bringing master data attribute of Notification document into BW. I saw it also bring the document system status and user status. But it only bring in the first status for each. i.e. for a notification document, it can has multiple system status (e.g. ATCO DLFL ...). this extractor only bring in 'ATCO'. while compare to the status DLFL (deletion flag), ATCO didn't really matter again.
So, i am trying to find out how this datasource extract the status, how can i change the status field into a 40 chars field so i can keep all active status (as it shows in ECC, when user display the notification document status). Did anyone solve this case before?
Thanks for the help.

Hi,
watch the following thread.
how to extract equipment status in to bw
and please refer following article by Vamsi
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/301941a0-25b4-2d10-6eb9-9758cbc28559
It would be very useful.
Thanks.

Filter the content on different queries for the same infoprovider and user

Hello,
We are trying to make the following security scenario in BI, and have
problem with the analysis object concept to filter at query level.
The idea is to permit to :
- user A
  - to execute query Q1 and view information about sites 1,2,3
  - to execute query Q2 and view information about sites 4,5,6
but for example for another user :
- user B
  - to execute query Q1 and view information about site 1,3
  - to execute query Q2 and view information about site 5,6,7
Q1 and Q2 are queries from the same infoprovider.
The idea is to make an automatic generation of analysis objects based
on the standard program : RSEC_GENERATE_AUTHORIZATIONS.
During tests, we have faced a problem with the object 0TCTQUERY that we
thought will permit us to filter at the query level, but unless we add
the name on the query on a role in the S_RS_COMP authorization object,
field RSZCOMPID, the query is not granted to the user.
The fact that we use both authorization objects : one for the query
definition, and another for the analysis authorization concept
(S_RS_AUTH, field BIAUTH), has disastrous effect : all values given in
the analysis objects are for all queries of an indicated infoprovider.
With that system, it's then not possible to propose dynamically different
views of the same data (ie from same infoprovider) based on the
authorization concept unless using the technic of customer-exit variable,
but with variable you will have a problem with old queries that doesn't
have a variable and that will permit to see all data given in the new
authorization objects.
Is there exists another object to filter at the query level in the
analysis objects ? If it's not the case, what is possible to do to reach
our goal with the new authorization concept ?
Thank you in advance for your help.
Best regards,
Gaël.

The data is protected on infoprovider level and not on the query level, so when two querys are build from the same Infoprovider then the authorizations are the same,
To achieve what you want to do, the querys must be built off different providers.   This can be achieved by placing the infoprovider in 2 differnt multiproviders and building the querys and authorizations seperatly on these.

Http System and User Mapping

hi,
I have created a Http system and mapped the user ID and password for the login page of that System. Now when i created a URL Iview for a particular application using the System defined above and after passing the username and password parameters as mapped user and mapped Password, i am not able to login into the web application. Its displaying the login page again asking for username and password.
What should be done so that i could login to the application directly after logging into the Portal.And also plz tell me the required parameters that needs to be filled in while creating the system.Also the consolidated list of steps to be followed.
Thanks in advance,
Jules

Hi Jules,
What you are talking about is also called SSO. Well you have to also do a minor change in the setting. Go to HTTP System which you have created and in the Property Category dropdoen select User Management. Here you will find the user mapping type. Chnage the option of this user mapping according to your need. There will be three option for that:
1) User - If only user need to be mapped.
2) Admin - If only admin need to be mapped.
3) User,Admin - If both User and admin need to be mapped. (prefered if SSO has to provided for application to all users including Admin).
Also I beleive that you have create dthe System alias for the HTTP system you have created, because you will need that for user mapping in the further steps.
I hope this solves your problem.
Regards
Pravesh
PS: Please consider rewarding points on SDN for helpful answers. Thanks in Advance!!

When i prient document i can not see my system # and user ID etc

plese help me on this.
thankz

Hi Khan,
I am not clear with your question.
Do you want to print the user id and the system name on the paper? You can see the user id and the system in SP01
you can see the output request for particular user id,system and also client.If your want to see the user id and the system on the paper then you have to code it according.
Reward points if helpfull.
Regards,
Vamshi.

N70 Operating System and User Interface

Hi,
Could you please specify the OS and User Interface version of N70, have the OS/UI of the new handsets been changed recently, please give details?
Appreciate your help.

Good question with good answer.
I think may be I can contribute to it too.
Symbian OS is an operating system, designed for mobile devices, with associated libraries, user interface frameworks and reference implementations of common tools, produced by Symbian Ltd. It is a descendant of Psion's EPOC and runs exclusively on ARM processors.
Symbian is currently owned by Ericsson (15.6%), Nokia (47.9%), Panasonic (10.5%), Samsung (4.5%), Siemens AG (8.4%), and Sony Ericsson (13.1%). Whilst BenQ has acquired the mobile phone subsidiary of Siemens AG the Siemens AG stake in Symbian does not automatically pass to BenQ - this will need the approval of the Symbian Supervisory Board.
Symbian OS, with its roots in Psion Software's EPOC, is structured like many desktop operating systems with pre-emptive multitasking, multithreading, and memory protection.
There are a number of smartphone user interface platforms based on Symbian OS, including open platforms UIQ, Nokia's S60 (formerly known as "Series 60"), Series 80 and Series 90 and closed platforms such as that developed for NTT DoCoMo's FOMA handsets. This adaptability allows Symbian OS to be used on smartphones with a variety of form factors (e.g. clamshell or candybar/"monoblock", keypad- or pen-driven).
Here is a short history:
Symbian OS v9.1 released early 2005. It includes many new security related features, particularly a controversial platform security module facilitating mandatory code signing. Symbian argues that applications and content, and therefore a developers investment, are better protected than ever, however others contend that the requirement that every application be signed (and thus approved) violates the rights of the end-user, the owner of the phone, and limits the amount of free software available. The new ARM EABI binary model means developers need to retool and the security changes mean they may have to recode. S60 3rd Edition phones have Symbian OS 9.1. . The earlier versions had a fatal defect where the phone hangs temporarily after the owner sent hundreds of SMSes. However, on 13 September 2006, Nokia releases a small program to fix this defect.
Current recent sets like n91,n80,n73,n93 has OS 9.1.
Symbian OS v9.2 released Q1 2006. Support for Bluetooth 2.0 (was 1.2) and OMA Device Management 1.2 (was 1.1.2). S60 3rd Edition Feature Pack 1 phones have Symbian OS 9.2.
Symbian OS v9.3 released on 12 July 2006. Upgrades include native support for Wifi 802.11, HSDPA, Vietnamese language support.Message Edited by korngear on 31-Jan-2007
05:47 PM

Problems with creating reference system and user mapping in EP

Hi@all,
we have deployed Support Package Stack 25 in our portal. After that, the UWLJWF Administration was not available anymore. We get Portal Runtime Error. We habe resolved this error!
In the UME Administration in the System Administration --> System Configuration --> UME Configuration --> User Mapping tab
there was a message saying that CTS was non-existent. I changed the Reference System to (No reference system) and the UWL Admin page is working now!
But now, the SSO to our 3rd Party System is not possible anymore!
I have created an new system alias but i cannot see it in the User Mapping tab. How is it possible. I found no documentation?
Thany you and best regards
Juergen

I am using EP7 Stack 11 and unfortunately the only options I have are:
user
admin
admin,user
It is currently set to admin, user and does not seem to work!
Phil
Message was edited by:
Phil Wade

Table for Statuses for system and User

Similar Messages

Maybe you are looking for