Table Height Missing in DW CS3?

I just upgraded from DW8 to CS3. The Properties panel is
missing the table height fields. I see width, but where height is
supposed to be is blank...
I tried searching for "table" in help and couldn't find an
answer. Any help would be greatly appreciated!
Thanks
Jose

In response to the web community at large, each new version
of DW is moving
more and more in the direction of producing so-called valid
code and
formatting pages exclusively via CSS.
"height" has never been a valid attribute of the HTML
<table> tag, even
though some browsers have honoured it, so it has finally been
removed from
the DW interface.
http://www.w3.org/TR/html401/struct/tables.html#h-11.2.1
See
http://www.apptools.com/examples/tableheight.php
Also, FYI, here's an example of formatting a table-based
layout with CSS:
http://www.projectseven.com/tutorials/css/css_td/index.htm
In any case, it's good practice on the web to allow your
tables to collapse
to suit their content.
Regards
John Waller

Similar Messages

Table Height in Dreamweaver CS3

Why is it that I'm unable to make my table height stretch to
fit the browser? I never had this problem when I used FrontPage. Is
there some code I need to add by hand to make it work? I've
double-checked the table height and cell height and they are both
at 100%.
Thanks in advance!

> Why is it that I'm unable to make my table height
stretch to fit the
> browser? I
Table height is invalid HTML. DW likes to work with valid
HTML. To make
sure that your page validates, DW adds a valid and complete
doctype to each
new page you create. When a browser sees a page with a valid
and complete
doctype, it renders the page in Standards mode, ignoring any
invalid HTML it
encounters. Thus DW pages will result in your table heights
being ignored
in the browser. FP had no sense of this detail, and threw
invalid code out
like a Pez dispenser, hence your invalid construction seemed
to work.
If you really need to do stuff like this, read here -
http://www.apptools.com/examples/tableheight.php
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Mr. Angier" <[email protected]> wrote in
message
news:fnogrp$cv0$[email protected]..
> Why is it that I'm unable to make my table height
stretch to fit the
> browser? I
> never had this problem when I used FrontPage. Is there
some code I need
> to add
> by hand to make it work? I've double-checked the table
height and cell
> height
> and they are both at 100%.
>
> Thanks in advance!
>

I am receiveing error while creating Z table: Entry in table TAORA missing

Hi Experts,
I am receiving "Entry in table TAORA missing" while creating Z table.
Please help
Edited by: N_niki on Jun 11, 2011 9:22 AM

Hi
1) Check for the DB System. The Table name in "Entry in table TAORA missing", meant to save the "DATA CLASS of the ORACLE application"., OR
2) check for the Data Class you Selected, on Creation of the Z Table, for which an Entry exists in the TAORA or the Available DATA CLASS in the TAORA Table to fix it.
Regards
Gopu

Some SAP R/3 Tables are Missing

Hi Friends,
I made a connection between SAP R/3 and Crystal Reports. When I am trying to see the tables of SAP R/3 I am not able to see all the tables only few tables are visible. For example in Standard table I am able to see only LIKP table, but VBAK, VBAP etc ... tables are missing in the list.
Can any one guide me to get the total list of SAP R/3 tables.
Regards
Sankar

See this posting for how to: Crystal Reports 10
You'll have to change the registry key to match your version but should work for you.
Thank you
Don

One table is missing in R/3 DDIC

Hi Experts,
While I am monitoring the db02 T-code, Under tables and indexes it is showing that one table is missing in R/3 DDIC.
Tables Indexes
Total number 68,514 82,026
Total size/kb 43,431,936 43,282,240
More than 1 extent 2,957 3,470
Missing in database 0 0
Missing in R/3 DDIC 1 0
Space-critical objects 0 0
Please let me know how can i find out this missing table in R/3 DDIC
Regards,
Reddy V

Hi Deepak,
I have done the same
In T-code DB02 Menu "Go TO" -> Table and Indices -> DB <-> ABAP Dic<->Display
It is showing the below details
Other checks
Tables 1
SCI_TEMPT Should not be created in DB
I have select the SCI_TEMPT table and clicked on create in DB.
After that again I have checked the db02 t-code again it is showing the same.
Please let me know how can fix this issue.
Regards,
Reddy V.

Dynamic table height for Printed PO Report

I have created a RTF template for Printed Purchase Order report using Microsoft Word. The template has Header and Line information. I have two questions.
1) Lines are printed in Table format. I also print header level notes in Line Section.
If the header notes are blank, I want the line information (line #, Item Number, Description, quantity etc) to be moved to line1. How do I acheive this?
I want to dynamically adjust the Table height based on the information printing in the line section. The table has two rows. One for Header notes and one for Line information.
2) Header notes field is placed in Description column of Line Table (MS word). Currently Header notes are printing within the Description column as wrapped text. I want to print Header notes in one line. How do I expand this field to print in one line?
Thanks,

Hi,
Even I faced the same problem, however I have found a workaround to come out of this problem.
My PO design template has 16 lines, I am counting the number of lines with data and subtracting the same from 16 and inserting that many empty rows to increase the table height.
I am pasting the code so that it will be useful for others.
Paste this code before LINES_ROW for-each loop. This will give the number of lines present.
<xsl:variable name="_XDOFOTOTAL" select="count(.//LINES_ROW)"/>
Paste this code at the end of the for-each loop.

<xsl:variable name="_cnt" select="16-$_XDOFOTOTAL"/>
<xsl:call-template name="countdown">
<xsl:with-param name="countdown" select="16-$_XDOFOTOTAL"/>
</xsl:call-template>
This function you can put it at the end.
<xsl:template name="countdown">

<xsl:param name="countdown"/>
     <xsl:if test="$countdown">
          <fo:table-row keep-together="always">
          <fo:table-cell/>
          <fo:table-cell>
          <fo:block height="13.2pt"/>
          </fo:table-cell>
          <fo:table-cell>
          <fo:block height="13.2pt"/>
          </fo:table-cell>
          <fo:table-cell xdofo:use-attribute-sets="c_33 c_35">
          <fo:block height="13.2pt"/>
          </fo:table-cell>
          <fo:table-cell xdofo:use-attribute-sets="c_33 c_35">
          <fo:block height="13.2pt"/>
          </fo:table-cell>
          <fo:table-cell>
          <fo:block height="13.2pt"/>
          </fo:table-cell>
          <fo:table-cell>
          <fo:block height="13.2pt"/>
          </fo:table-cell>
          <fo:table-cell>
          <fo:block height="13.2pt"/>
          </fo:table-cell>
          <fo:table-cell/>
          </fo:table-row>
          
          
          <xsl:call-template name="countdown">
               <xsl:with-param name="countdown" select="$countdown - 1"/>
          </xsl:call-template>
     </xsl:if>
</xsl:template>
If some one is having a better solution, please share.
Regards,
SURESH KUMAR M R

Fixed Table Height for PO Report

Hi,
We have a problem in adjusting the height of the table for Purchase order Report.We are displaying lines and shipment information in the table.
But the shipments data is varying for each line due to which the table height is also varying on each page.
We tried fixing this by counting lines but this didn't help.
Cant we fix the table height so that it runs throughout the page irrespective of the number of lines it contains and gets attached to the footer information at the Bottom of the page.
Urgent help required.
Thanks in advance.

My suggestion would be to figure out the maximum number of lines the layout can handle and fix that number. Then modify the program that generates the XML output to create that many lines i.e. if the max number is 50 and your PO contains 2 lines, create 48 additional dummy blank lines so that the layout is always satisfied. For overflows, i.e PO contains 52 lines, make sure the program handles it.
Just my suggestion. I've used it for AP checks, where the layout is stub over check and it works great.

Xref table is missing when a pdf file is created with acrobat distiller 9.0.0

Hi
I created a pdf file with the new acrobat distiller 9.0.0 and i noticed that the xref table is missing in it.
Whereas the pdf files which created in older version (acrobat distiller 7.0.5) had the xref tables.
As i have written a perl script to open the pdf files (used a ready made module downloaded form cpan.org). The script works fine with all old pdf files but fails when it tries to open the pdf files created with distiller 9.0.0.
Could i know is any thing changed on acrobat distiller 9.0.0 ?
Thanks
Balaji.

PDF documents of version 1.5 and higher can contain cross-reference streams. Read the PDF Reference.

Entry in table TAORA missing! Please help with this error!

I am moving a Z table from QAS to PRD and in PRD the table gets moved in inactive state. When I try to activate it I get an error "Entry in table TAORA missing". Could someone please give me any information how to fix this?
Thanks.
Mithun

Hi Mithun Dada,
when u created this Z table may u have not maintained the
Data class and some setting correctly.Check for it and move it.
<REMOVED BY MODERATOR>
Thanks and regards,
Rajeshwar.
Edited by: Alvaro Tejada Galindo on Apr 23, 2008 5:14 PM

Table height in layout development

Hello there,
               I have defined a table in the layout which has a header and a row. Now, I have another table is displayed (using repeating subforms not with standard table layout). When my data is getting printed, if the inner table is blank, then it is currently leaving a blank space on its place. I want the height to be reduced if there is no data in the inner table.
                 I have checked that all the subforms used in the ROW part are FLOWED. However I doubt that, it is taking minimum height of the ROW.
                Please let me know if there is any way to reduce height automatically when there is less data to be printed.
Thanks & regards,
Ganesh V Khumse

> Why is it that I'm unable to make my table height
stretch to fit the
> browser? I
Table height is invalid HTML. DW likes to work with valid
HTML. To make
sure that your page validates, DW adds a valid and complete
doctype to each
new page you create. When a browser sees a page with a valid
and complete
doctype, it renders the page in Standards mode, ignoring any
invalid HTML it
encounters. Thus DW pages will result in your table heights
being ignored
in the browser. FP had no sense of this detail, and threw
invalid code out
like a Pez dispenser, hence your invalid construction seemed
to work.
If you really need to do stuff like this, read here -
http://www.apptools.com/examples/tableheight.php
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Mr. Angier" <[email protected]> wrote in
message
news:fnogrp$cv0$[email protected]..
> Why is it that I'm unable to make my table height
stretch to fit the
> browser? I
> never had this problem when I used FrontPage. Is there
some code I need
> to add
> by hand to make it work? I've double-checked the table
height and cell
> height
> and they are both at 100%.
>
> Thanks in advance!
>

Lexmark all-in-one printer error: Color table is missing

I've got this "Color table is missing." only after I accepted the automatic update 2.2 of 24.2 MB coming from Lexmark.
To solve the problem I had to remove ALL traces of Lexmark drivers and software, then reinstall the correct driver, the one for Mac Os 10.6 (snow leopard).
Now I must remember NOT to accept any automatic update and I can use again my X3550.
So please DO NOT INSTALL that update 2.2 of 24.2 MB!!!
Message was edited by: Daniele P.

Color table is missing: solved.
I've got this "Color table is missing." only after I accepted the automatic update 2.2 of 24.2 MB coming from Lexmark.
To solve the problem I had to remove ALL traces of Lexmark drivers and software, then reinstall the correct driver, the one for Mac Os 10.6 (snow leopard).
Now I must remember NOT to accept any automatic update and I can use again my X3550.
So please DO NOT INSTALL that update 2.2 of 24.2 MB!!!

Table is missing in ms-access shutter

when open the shutter bar tables is missing
when I choose Query ti show tables
all the line titles has moved
other sumptuous is that the find box is not show the title "serach doument"
please help

Hi,
   Ok,But What i am seeing in trace is, it is happening for each and every record,It shows the document number of every record with the corresponding SQL statement and time.If our selection is huge over millions of record , is the trace is going to show all the records fetched on all the tables in the report.
My runtime analysis(SE30) result is below
Call                                Gross                                      Net
Runtime analysis                     1,968,837,631                     0
Program ZFAPR2950_VENDOR      1,968,835,234                     46
Screen entry                      1,968,539,963                     70
PAI screen SAPMSSY0     1,968,539,807                     23
Event LDB-Processing     1,968,539,784                     23
PERFORM EXTRACT_DATA     1,968,539,729                    20,378
PERFORM GET_POSTED_DATA     1,889,897,362          2,513
<b>Fetch RBKP</b>                   1,475,942,699                   1,475,942,699
Fetch BKPF                     423,975,477                             423,975,477
Can i confirm with this my report is taking huge time while fetching from RBKP even though it doesn't appear in SQL trace(St05)
Regards,
Karthik.k

Table height changes in Firefox

Here is my website. Looks great in IE6, but in Firefox the
table height changes and on my 15" monitor, the bottoms get cut
off. I'm a graphic designer and don't know code well, so I really
need advice on how to correct this in DW8. Thanks.
http://bellsouthpwp.net/r/a/rarose1967/Portfolio/Portfolio2/final/Pages/

Bobbi67 wrote:
> Here is my website. Looks great in IE6, but in Firefox
the table height changes
> and on my 15" monitor, the bottoms get cut off. I'm a
graphic designer and
> don't know code well, so I really need advice on how to
correct this in DW8.
> Thanks.
>
http://bellsouthpwp.net/r/a/rarose1967/Portfolio/Portfolio2/final/Pages/
>
What happens if you remove "height" attributes from table
and td's?
Mick

Re: Some Tables are missing: Query Builder

Thank you!!! I had the same problem and this (table.xml) has helped, I can now see the tables in the left.
I'm also not able to see any tables in the "Query Builder". I have tried to explore to see if the fix is similar with no luck. Does the Query Builder have a simlar fix?
Thanks!!!
Max

Max,
I branched this query to start a new thread. While the thread: Some Tables are missing did help you see your tables, much of the discussion happened last year and was not about the query builder.
In the query builder for the current 1.1.2 build, you can only see tables you own. In the next update, you'll also be able to see tables you have select access to.
Regards
Sue

Table CS_SRS missing

Hi folks,
The table 'MDYS.CS_SRS' is missing in my database. I don't know if the table is necessary, but I think it is, is there a way to get the table back?
Kind regards,
Kodde

It is MDSYS.CS_SRS and if it is missing, check your install.
If that table is missing it is likely that the install of Spatial is not correct so other things might also be missing.
siva

Table Height Missing in DW CS3?

Similar Messages

Maybe you are looking for