Table into matrix

Hi everyone!
I've got the following problem. I have to create a package which deals with some mathematical calculations. A procedure in this package takes a name of view as a parameter and has to "convert" this view to a matrix. For this purpose I've declared two-dimensional VARRAY:
TYPE NROW IS VARRAY(100) OF NUMBER;
TYPE MNTABLE IS VARRAY(100) OF NROW;
xt MNTABLE;
The point is that the dimension of that array becomes known only during runtime (I simply retrieve the number of rows and cols in the view). The problem related to this is that in FETCH statement for the cursor:
OPEN data_retrieve FOR 'SELECT * FROM ' || viewname;
I can't specify the exact number of fields to retrieve data in:
FETCH data_retrieve INTO ...
-- if I know the number of fields I do it like this:
-- FETCH data_retrieve INTO xt(i)(1), xt(i)(2), xt(i)(3), xt(i)(4);
So what is the way of doing this? Or maybe you'd recommend another data structure (not using VARRAYs but that will nevertheless allow me to operate with it just like I do it with matrix).

Cool,
Then all i can guess is maybe you should check out DBMS_SQL, kind of the generic solution to "i don't know what i have, but i have something i want" type of questions like yours.
I could just be daft today, but i still don't entirely see what you're after based on your original post, likely some sample data and what not would alleviate my confusion......

Similar Messages

How to make two matrix and table into same group in SSRS

Hi
i need to dispaly to dispaly data matrix and table . but matrix data on first page and table data on second page.
how to achive this . if i give pagebreak for every new instance for matrix, only matrix data is getting dispalyed in one page and on the second page seocond record date is getting displayed. after all matrix data is displayed ( in separate pages) , table
data is being dispalyed.
but i want to display matrix data on first page and table data on the second page for the first record. for second record also it should display matrix data on 3rd page and table data on 4th page etc..
i mean how to make matrix and table data as same group. so that i can set "page break for new instamce" etc..
how to achive this in SSRS2008

Hi Ramkanuganti,
From your description, you want to group both the matrix and table on the same field and add a page break between the two controls for each instance at run time.
To achieve your goal, we can display the matrix in a list and display the table in a nesting list. Please refer to the steps below:
Drag a “List” to the design surface. Drag the matrix into the top of the list (list1).
Drag a “”List” to the list1, under the matrix. Drag the table into the nesting list (list2).
Select “list1” and open the “Group Properties” from the “Row Groups” pane. Add the field on which you want to group the data. In the “Page Breaks” tab, select the “Between each instance of a group”.
Repeat step 3 to configure the “list2” using the same field. Additionally, please also select the “Also at the start of a group” option.
For more information about how to work with list, please refer to:
Adding a List
If you have any further questions, please feel free to ask.
Regards,
Mike Yin

How to bind the data from user table into user report

Hi All,
Please assist me to bind the data from user table into user report. I did create an user table with data and create a user report template (using Query Print Layout). How can I display my data into report format which I created before? Any sample program or document I can refer?
Platform: SAPB1 2005A
Add On Language: VB.Net 2003
Thanks.
rgds
ERIC

Hi Ibai,
Thanks for your feed back. I give you an example.
Let say now i wanna print employee list, so i will go
1. Main Menu -> Reports -> HR -> Employee List
2. Choose the Selection Criteria -> OK
3. Matrix will display (Employee List)
4. I can print the report click on print button
5. Printing report
My target
1. Main Menu -> Eric_SubMenu -> Employee List
2. Matrix will display (Employee List)
3. Print button
4. Print report
My problem
Now I would like to use my own report format. My own report format means I wanna add on my logo or do some customization within the employee report. So how I am going to do? I only able to display the employee list in matrix. How do I create a new report format and display it.
Thanks.
rgds
ERIC

Rendering xml-table into logical filename in SAP R/3

Hi,
I am trying to translate an xml-table with bytes into a logical filepath in SAP R3.
Do I have to use the method gui-download or shall I loop the internal xml-table?
When I tried to loop the xml-table into a structure, and then transfering the structure into the logical filename, I get problems with the line breaks in my xml-file. How do I get the lines to break exactly the same as I wrote them in my ABAP-code?
Edited by: Kristina Hellberg on Jan 10, 2008 4:24 PM

I believe you posted in the wrong forum.
This forum is dedicated to development and deployment of .Net applications that connect and interact with BusinessObjects Enterprise, BusinessObjects Edge, or Crystal Reports Server. This includes the development of applications using the BusinessObjects Enterprise, Report Application Server, Report Engine, and Web Services SDKs.
Ludek

Error while importing a DW table into DAC

Hi,
We are on OBIEE 7.9.6 and we have a requirement of adding new DW table. I created a new table in DW and getting error "Could connect to data source process. Process failed during creation of connection pool", while trying to import this new table into DAC. I would like to know why I am getting this error.
Any help is greatly appreciated.
Thanks,
Chandra

Thank you for your response.
I added this table in DW database and have imported into informatica. When I look at the traffic light it is red. Looks like thats the problem.
Thanks again.

Inserting data from one table into another table using PL/SQL

HI,
I am trying to insert values from one table into another using PL procedure, the values I want to retrieve from the table riverside1 are charac_id and charac_type and insert these values into another table called riverside2 , the stored procedure zorgs_gorfs(x,y) accepts two parameters which are 2 charac_id's of d characters in riverside1 then using insert statements inserts these characters from riverside1 into riverside2.
CREATE OR REPLACE PROCEDURE zorgs_gorfs(x IN NUMBER, y IN NUMBER) AS
     BEGIN
          INSERT INTO riverside2
               (charac_id)
          VALUES
               (x);
INSERT INTO riverside2
               (charac_id)
          VALUES
               (y);
      END zorgs_gorfs;
/This works but the problem im having is that when I also try to insert the charac_type as well as the charac_id it doesnt work below is the code:
CREATE OR REPLACE PROCEDURE zorgs_gorfs(x IN NUMBER, y IN NUMBER) AS
     BEGIN
          INSERT INTO riverside2
               (charac_id,charac_tye)
          VALUES
               (Select
                    charac_id,
                    charc_type
               FROM
                    riverside1
               WHERE
                    charac_id = x);
      END zorgs_gorfs;
/can someone kindly sort me out

modify this sql
INSERT INTO riverside2
               (charac_id,charac_tye)
          VALUES
               (Select
                    charac_id,
                    charc_type
               FROM
                    riverside1
               WHERE
                    charac_id = x);as
INSERT INTO riverside2
               (charac_id,charac_tye)
          VALUES
               (Select
                    charac_id,
                    charc_type
               FROM
                    riverside1
               WHERE
                    charac_id in ( x,y));But my suggestion would be consider revising your approach. It does not look that good.
Thanks,
karthick.

Loop at field-symbol (any table) into string ?

Hi Everyone,
I need little help, I have a requirement to extract table content with columns names as the header.
After doing some search I figured out the best way to this since table name will be only avaialbe at runtime through
a selection field . my problem is to loop through field-symbol and convert a structure to string value so that I can
write to the file.
REPORT zlab_tbl_export.
DATA table_name(30) VALUE 'ZSMARTTS_HTML'.
DATA v_file(100) VALUE 'c:\sap_export.txt'.
DATA line(1000).
DATA: o_data TYPE REF TO data.
CREATE DATA o_data TYPE TABLE OF (table_name).
FIELD-SYMBOLS: <table> TYPE ANY TABLE.
ASSIGN o_data->* TO <table>.
SELECT * UP TO 100 ROWS FROM (table_name) INTO TABLE <table>.
OPEN DATASET v_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
>>>>>>> LOOP at <table> into line.   >>>>>>>>>>>> " Here the code breaks and fail
TRANSFER line to v_file.
WRITE :/ line.
ENDLOOP.
CLOSE DATASET v_file.
Exception Message
|Error analysis                                                                                |
|    You attempted to move one data object to another.                                             |
|    This is not possible here because the conversion of a data object                             |
|    of type "v" to type "C" is not supported.                                                     |
|                                                                                |
|      List of internal ABAP types:                                                                |
|                                                                                |
|      C    Text (Character)                                                                       |
|      N    Numerical text                                                                         |
|      D    Date (YYYYMMDD)                                                                        |
|      T    Time (HHMMSS)                                                                          |
|      X    Hexadecimal                                                                            |
|      I    Integer                                                                                |
|      P    Packed number                                                                          |
|      F    Floating point number                                                                  |
|                                                                                |
|      h    Internal table                                                                         |
|      r    Object reference                                                                       |
|      l    Data reference                                                                         |
|      g    String of type C                                                                       |
|      y    String of type X                                                                       |
|      s    2-byte integer with plus/minus sign                                                    |
|      b    1-byte integer without plus/minus sign                                                 |
|      u    Structure (flat structure)                                                             |
|      v    Structure (deep structure)                                                             |

Hi Everyone, I need little help, I have a requirement to extract table content with columns names as the header. After doing some search I figured out the best way to this since table name will be only avaialbe at runtime through a selection field . my problem is to loop through field-symbol and convert a structure to string value so that I can write to the file.
thie is the code
REPORT zlab_tbl_export.
DATA table_name(30) VALUE 'ZSMARTTS_HTML'.
DATA v_file(100) VALUE 'c:\sap_export.txt'.
DATA line(1000).
DATA: o_data TYPE REF TO data.
CREATE DATA o_data TYPE TABLE OF (table_name).
FIELD-SYMBOLS: <table> TYPE ANY TABLE.
ASSIGN o_data->* TO <table>.
SELECT * UP TO 100 ROWS FROM (table_name) INTO TABLE <table>.
OPEN DATASET v_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
LOOP at <table> into line.   " Fail here
TRANSFER line to v_file.
WRITE :/ line.
ENDLOOP.
CLOSE DATASET v_file.
and this is the exception:
Error analysis
You attempted to move one data object to another.
    This is not possible here because the conversion of a data object
    of type v to type C is not supported.
Edited by: Misbah on Jan 7, 2010 11:50 PM

How do I stop FireFox from converting css3 transforms such as scale, or rotate, into matrix transforms?

Go to pilatch.com/cards and click any of the cards in the arc. Now do the same in Chrome, or Safari, or IE 9. I have un-min-catted all my JavaScript, so you can see what's going on more easily.
CSS3 transforms in version 16 of FireFox are being converted into matrix transforms.
It pretty much horks my rotate and scale animations.
For instance, if you set the style attribute of an element to something like, style="transform:scale(0.75)", FireFox immediately converts that element's transform property, such as <element>.style.transform to "matrix(...)".
I know how to do the linear algebra to convert rotate and scale via jQuery cssHooks into matrix transformations, and I've even written code to detect this "feature" of a browser, (that it forces a transform into matrix), and return a different hook that writes a matrix transform instead of a rotate transform, or scale, all in the past two days, on my development site.
However, it's proving to be increasingly challenging to make this new feature compatible with jQuery's animations. Going further, I may have to hack jQuery just to make this work for FireFox, or drop FireFox animation support altogether unless some FireFox developers make their new implementation backwards compatible.
I know that transforms normally get converted into matrices behind the scenes in the rendering engine. Leave your matrix there. Don't overwrite what the user has put in for a transform!
I also know that I should be using CSS3 animations, but, dangit, I started this project before those had widespread support. I can't rewrite all my animations because I want to support FireFox. That's not really an option. I'll direct my users to Chrome instead. I have more features in development that use these types of animation, and I'm in too deep to turn back.
Thanks for your consideration. Please contact me as you learn more about this.
-Beefzilla

The URL in question is [http://pilatch.com/cards pilatch.com/cards]

Extract Multiple Rows from a Single Table into a Single Row in a New Table

I have a table in a database that contains contact data like name, address, phone number, etc.
The folks who designed the database and wrote the application wrote it so that all contact records are placed in that table, regardless of contact type. In fact, the contacts table does not even have a column for "type" even though there are many
different types of contacts present in that table.
I am trying to write a mail merge style report in SRSS, that gets sent to a specific type of contact, based on criteria provided that must be obtained from another table, and that data is then used to get back to a specific set of contacts from the contacts
table.
The attached file directly below describes my problem and all related information in an extremely detailed way.
SRSSMailMergeIssue.pdf
Unless there is a way to make a SRSS Tablix point to two different data sets in SRSS, it looks like I have to combine multiple rows from the same table into a new table.
If anyone can review the details in the attached pdf file and possibly point me in the direction I need to run to solve this probelm, I would greatly appreciate it.
I also included a document (below) that shows the tables I reference in the probelm description.
dbtables.pdf

I found a solution.... and posted it below
select
dk.ucm_docketnumber [UCM DocketNumber],
dk.ucm_docketid [UCM DocketID],
vc.FirstName [Victim FirstName],
vc.MiddleName [Victim MiddleName],
vc.LastName [Victim LastName],
vc.Suffix [Victim Suffix],
vc.Address1_Line1 [Victim AddressLine1],
vc.Address1_Line2 [Victim AddressLine2],
vc.Address1_Line3 [Victim AddressLine3],
vc.Address1_City [Victim City],
vc.Address1_StateOrProvince [Victim StateProvince],
vc.Address1_PostalCode [Victim Postalcode],
oc.FirstName [Offender FirstName],
oc.MiddleName [Offender MiddleName],
oc.LastName [Offender LastName],
oc.Suffix [Offender Suffix],
oc.Address1_Line1 [Offender AddressLine1],
oc.Address1_Line2 [Offender AddressLine2],
oc.Address1_Line3 [Offender AddressLine3],
oc.Address1_City [Offender City],
oc.Address1_StateOrProvince [Offender StateProvince],
oc.Address1_PostalCode [Offender Postalcode],
pc.FirstName [Arresting Officer FirstName],
pc.MiddleName [Arresting Officer MiddleName],
pc.LastName [Arresting Officer LastName],
pc.Address1_Line1 [Arresting Officer AddressLine1],
pc.Address1_Line2 [Arresting Officer AddressLine2],
pc.Address1_Line3 [Arresting Officer AddressLine3],
pc.Address1_City [Arresting Officer City],
pc.Address1_StateOrProvince [Arresting Officer StateProvince],
pc.Address1_PostalCode [Arresting Officer Postalcode]
FROM ucm_docket dk
left outer join ucm_victim v on dk.ucm_docketid = v.ucm_docketnumber
left outer join contact vc on vc.contactid = v.ucm_victimlookup
left outer join ucm_offender o on o.ucm_offenderid = dk.ucm_offenderlookup
left outer join contact oc on oc.contactid = o.ucm_individualid
left outer join contact pc on pc.contactid = dk.ucm_ArrestingOfficerLookup
WHERE (dk.ucm_docketnumber = @DocketNUM)

Store data from a table into excel sheet and email

Hi all,
I am just wondering, i m not sure where to start. I want to insert data from a table into an excel spread sheet.
I'm working on a stored procedure with 3 input parameters:
1. the actual query
2. userid
3. the column headers (comma separated) - these will be in the same order as the outer select statement in the query itself. I will use the column headers for the respective columns in Excel worksheet.
When the proc is executed, the excel is populated. If the record count is > 65536, then I need to create multiple worksheets in the same excel file.
How can i do that? Can any body please help with this..?

We are doing like this ( Not sure whether it is the best method available)
--Get the output of the query (Since the number of columns is not fixed you would have to use dbms_sql package)
--loop through the output and write into a file, for example test.csv, using UTL_FILE package
--load the file into a blob variable(we are doing it by loading it into a table)
--For mailing You can use the below package
http://www.oracle.com/technology/sample_code/tech/pl_sql/htdocs/Utl_Smtp_Sample.html
Mailing code we are using is given below:
CREATE OR REPLACE procedure xls_mail(
    p_sender     varchar2, -- sender, example: 'Me <[email protected]>'
    p_recipients varchar2, -- recipients, example: 'Someone <[email protected]>'
    p_subject    varchar2, -- subject
     p_text           varchar2, -- text
     p_filename      varchar2, -- name of xls file
     p_blob           blob         -- xls file
) is
conn      utl_smtp.connection;
i number;
len number;
BEGIN
conn := demo_mail.begin_mail(
    sender     => p_sender,
    recipients => p_recipients,
    subject    => p_subject,
    mime_type => demo_mail.MULTIPART_MIME_TYPE);
demo_mail.begin_attachment(
    conn         => conn,
    mime_type    => 'application/xls',
    inline       => TRUE,
    filename     => p_filename,
    transfer_enc => 'base64');
    -- split the Base64 encoded attachment into multiple lines
   i   := 1;
   len := DBMS_LOB.getLength(p_blob);
   WHILE (i < len) LOOP
      IF(i + demo_mail.MAX_BASE64_LINE_WIDTH < len)THEN
         UTL_SMTP.Write_Raw_Data (conn
                                , UTL_ENCODE.Base64_Encode(
                                        DBMS_LOB.Substr(p_blob, demo_mail.MAX_BASE64_LINE_WIDTH, i)));
      ELSE
         UTL_SMTP.Write_Raw_Data (conn
                                , UTL_ENCODE.Base64_Encode(
                                        DBMS_LOB.Substr(p_blob, (len - i)+1, i)));
      END IF;
      UTL_SMTP.Write_Data(conn, UTL_TCP.CRLF);
      i := i + demo_mail.MAX_BASE64_LINE_WIDTH;
   END LOOP;
demo_mail.end_attachment(conn => conn);
demo_mail.attach_text(
    conn      => conn,
    data      => p_text,
    mime_type => 'text/html');
demo_mail.end_mail( conn => conn );
END;

SSIS 2012 is intermittently failing with below "Invalid date format" while importing data from a source table into a Destination table with same exact schema.

We migrated Packages from SSIS 2008 to 2012. The Package is working fine in all the environments except in one of our environment.
SSIS 2012 is intermittently failing with below error while importing data from a source table into a Destination table with same exact schema.
Error: 2014-01-28 15:52:05.19
   Code: 0x80004005
   Source: xxxxxxxx SSIS.Pipeline
   Description: Unspecified error
End Error
Error: 2014-01-28 15:52:05.19
   Code: 0xC0202009
   Source: Process xxxxxx Load TableName [48]
   Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Invalid date format".
End Error
Error: 2014-01-28 15:52:05.19
   Code: 0xC020901C
   Source: Process xxxxxxxx Load TableName [48]
   Description: There was an error with Load TableName.Inputs[OLE DB Destination Input].Columns[Updated] on Load TableName.Inputs[OLE DB Destination Input]. The column status returned was: "Conversion failed because the data value overflowed
the specified type.".
End Error
But when we reorder the column in "Updated" in Destination table, the package is importing data successfully.
This looks like bug to me, Any suggestion?

Hi Mohideen,
Based on my research, the issue might be related to one of the following factors:
Memory pressure. Check there is a memory challenge when the issue occurs. In addition, if the package runs in 32-bit runtime on the specific server, use the 64-bit runtime instead.
A known issue with SQL Native Client. As a workaround, use .NET data provider instead of SNAC.
Hope this helps.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Error while downloading data from internal table into XML file

hi all,
i developed a program to download data from into internal table to xml file like this.
tables: mara.
parameters: p_matnr like mara-matnr.
data: begin of itab_mara occurs 0,
            matnr like mara-matnr,
            ernam like mara-ernam,
            aenam like mara-aenam,
            vpsta like mara-vpsta,
      end of itab_mara.
data: lv_field_seperator type c,     " value 'X',
      lv_xml_doc_name(30) type c,    " string value my xml file,
      lv_result type i.
      lv_field_seperator = 'x'.
      lv_xml_doc_name = 'my xml file'.
types: begin of truxs_xml_line,
          data(256) type x,
      end of truxs_xml_line.
types:truxs_xml_table type table of truxs_xml_line.
data:lv_tab_converted_data type truxs_xml_line,
     lt_tab_converted_data type truxs_xml_table.
data: lv_xml_file type rlgrap-filename value 'c:\simp.xml'.
select matnr ernam aenam vpsta from mara into table itab_mara up to 5
       rows where matnr = p_matnr.
CALL FUNCTION 'SAP_CONVERT_TO_XML_FORMAT'
EXPORTING
   I_FIELD_SEPERATOR          = lv_field_seperator
I_LINE_HEADER              =
I_FILENAME                 =
I_APPL_KEEP                = ' '
   I_XML_DOC_NAME             = lv_xml_doc_name
IMPORTING
   PE_BIN_FILESIZE            = lv_result
TABLES
    I_TAB_SAP_DATA             = itab_mara
CHANGING
   I_TAB_CONVERTED_DATA       = lt_tab_converted_data
EXCEPTIONS
CONVERSION_FAILED          = 1
OTHERS                     = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
open dataset lv_xml_file for output in binary mode.
loop at lt_tab_converted_data into lv_tab_converted_data.
transfer lv_tab_converted_data to lv_xml_file.
endloop.
close dataset lv_xml_file.
this program is syntactically correct and getting executed, but when i open the target xml file it is showing the following error.
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
XML document must have a top level element. Error processing resource 'file:///C:/simp.xml'.
will anyone show me the possible solution to rectify this error
thanks and regards,
anil.

Hi,
Here is a small sample program to convert data in an internal table into XML format and display it.
DATA: itab TYPE TABLE OF spfli,
      l_xml TYPE REF TO cl_xml_document.
* Read data into a ITAB
SELECT * FROM spfli INTO TABLE itab.
* Create the XML Object
CREATE OBJECT l_xml.
* Convert data in ITAB to XML
CALL METHOD l_xml->create_with_data( name = 'Test1'
                                     dataobject = t_goal[] ).
* Display XML Document
CALL METHOD l_xml->display.
Here are some other sample SAP programs to handle XML in ABAP:
BCCIIXMLT1, BCCIIXMLT2, and BCCIIXMLT3.
Hope this helps,
Sumant.

How to populate data from table into datagrid in form

hi there. may i know how to populate data from a table into a datagrid? i have created a datagrid in a form using OLE's microsoft datagrid. i'm having problem to populate data from table into the grid. can i know how to do that? thanks

Not exactly. I want to enter input from form and the user can have all options to choose i.e. HIGH, MEDIUM or so on.
Suppose, you have option to select HIGH, MEDIUM or LOW and you can see all these options together. You select LOW and when you save, it is saves in the table as a value. So when you view the table again, it will show LOW as active and HIGH and MEDIUM are null.

How to load Data of 2 tables into 1 dimension? Snowflake?

I want to load data of scott.dept & scott.emp into one dimension using AWM.
Don't want to join the 2 tables into 1, don't want to create a view either.
Is there a way?
I tried to select 'snowflake' as the dimension table type in the mapping editor.
but the data was not loaded properly.
only the dept data got loaded.
Any idea?

I created a new dimension called DEPT and added two levels : DEPT and EMP.
In the mapping I used the setting 'Other' rather than 'snowflake'. It requires a bit more mapping as you have to set the mapping details for each attribute and the member/parent details. This worked and loaded the data correctly. The mapping looks a bit strange as their are lines everywhere. But it works.
However, I then started playing with this to try and expand it a little further and things started to get very difficult
1) Manager- I tried to add an additional level to map the manager but this would not work because you cannot find the department for the manager from the existing table. If you try and use the Dept column what will be allocated is the department for the last employee in that table with the selected manager.
2) All - there is no way to add an 'All' level. Most OLAP dimensions require an 'All' or top level node to allow the data to be aggregate to a useful total. May be this should be an automatic feature of AWM - A possible enhancement request? Who knows it might be in the next release of AWM which is due shortly.
3) It is not possible to save the mapping - once you have created the mapping if you click on any other node in the AWM tree and then click on mapping again the type of dimension table reverts to 'Star Schema'. If you change the type to 'Other' some of the mappings get lost. This looks like a bug.
4) If you want to make this a value based dimension then you have to use the natural keys in the data. If you use surrogate keys then you can only create a level based dimension.
Hope this helps
Keith

How to download values in an internal table into an excel file

is there any fn module to download the values in an internal table into an excel file..

hi
the function module "GUI_DOWNLOAD" downloads the data from
an internal table into a file (can be xl, dat ,doc etc) .
Plz follow the usage below ;
Parameters : pa_pfile LIKE rlgrap-filename OBLIGATORY.
Data : lv_filename TYPE STRING.
lv_filename = pa_pfile.
CALL FUNCTION 'GUI_DOWNLOAD'
   EXPORTING
   BIN_FILESIZE                  =
     FILENAME                      = lv_filename
     FILETYPE                      = 'ASC'
   APPEND                        = ' '
    WRITE_FIELD_SEPARATOR         = 'X'
   HEADER                        = '00'
   TRUNC_TRAILING_BLANKS         = ' '
   WRITE_LF                      = 'X'
   COL_SELECT                    = ' '
   COL_SELECT_MASK               = ' '
   DAT_MODE                      = ' '
   CONFIRM_OVERWRITE             = ' '
   NO_AUTH_CHECK                 = ' '
IMPORTING
   FILELENGTH                    =
   TABLES
     DATA_TAB                      = tb_download         " table data to b downlaoded
EXCEPTIONS
    FILE_WRITE_ERROR              = 1
    NO_BATCH                      = 2
    GUI_REFUSE_FILETRANSFER       = 3
    INVALID_TYPE                  = 4
    NO_AUTHORITY                  = 5
    UNKNOWN_ERROR                 = 6
    HEADER_NOT_ALLOWED            = 7
    SEPARATOR_NOT_ALLOWED         = 8
    FILESIZE_NOT_ALLOWED          = 9
    HEADER_TOO_LONG               = 10
    DP_ERROR_CREATE               = 11
    DP_ERROR_SEND                 = 12
    DP_ERROR_WRITE                = 13
    UNKNOWN_DP_ERROR              = 14
    ACCESS_DENIED                 = 15
    DP_OUT_OF_MEMORY              = 16
    DISK_FULL                     = 17
    DP_TIMEOUT                    = 18
    FILE_NOT_FOUND                = 19
    DATAPROVIDER_EXCEPTION        = 20
    CONTROL_FLUSH_ERROR           = 21
    OTHERS                        = 22
IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
       WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards
Pankaj

Table into matrix

Similar Messages

Maybe you are looking for