Table is not in nametab

Does anyone knows what means "Table ZT_QM is not in nametab" when importing a transport request with this table
Thank you in advance

the namespace probably require a double Z at the beginning of the name: ZZ_something.
Roberto Mazzali

Similar Messages

Table CWBCIDATA is not in nametab

Hi,
We implemented SAP Note in our development system using tcode SNOTE. When we tried to transport the request to our QA system, all the programs were transported successfully with the following error message: Table TABLENAME is not in nametab
Table Names: CWBCICATTR, CWBCIDATA, CWBCIHEAD
In our development system, we installed Note Assistant. Note Assistant is not installed in our QA. Could it be the cause of this error? Do we need to install Note Assistant in our QA and Production systems?
Can anybody answer?
Thanks in advance,
sasi

Hi,
The name table (nametab) contains the activated table and field definitions in the R/3 System. An entry is made in the R/3 Repository Buffer when activation of a table definition is requested, either by a user (using the ABAP/4 Dictionary, transaction SE11 ) or by mass activator. The appropriate nametab is then generated from the information managed by the R/3 Repository.
You need to create a transport request in the source system and then import this into the target system then restart the Client import again
Reward if useful!

Short dump 'Table does not exist in database'

Hello All,
When a report is executing it is going to short dump by saying 'Table does not exist in database'. As per the short dump analysis this issue is happening because of the following   Native SQL statement statement :
Program : %_T050N0 (This is a dynamic program generating by SAP )
Form Name : DYN_LIC_SEL_TOT
exec sql performing LOOP_MOVE_WRITE_ISAP.
select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty into :dcat-lplate, :dcat-matnr,
:dcat-werks, :dcat-charg, :dcat-holdflag,
:dcat-qty from ZLICENSE_R2 where itm_num   = :p_matnr and
                model_lot = :p_charg
endexec.
As per the customer this issue occurring since they migrated the SAP back-end data base from Oralce to DB6. Here I felt that ZLICENSE_R2 is not migrated from the Oracle to DB6. But as per the BASIS Team, even this table was not maintained in Oracle also. If the table was not maintained in the Oracle, this issue should have been there even before migration also.
Following is the short dump details:
Short text
    Table does not exist in database.
What happened?
    The table or view name used does not
    exist in the database.
    The error occurred in the current database connection "DEFAULT".
What can you do?
    Check the spelling of the table names in your report.
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_NATIVE_SQL_ERROR', was not
     caught in
   procedure "DYN_LIC_SEL_TOT" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Triggering SQL statement: "select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty from ZLICENSE_R2 where itm_num = ? and model_lot = ? "
Database error code: "-204"
Could you please let me know what might be the reason for this issue.
Many Thanks in Advance.

Transaction SE11, input ZLICENSE_R2 for table name, and display the table. Did the table display? If not, that is the main problem.
If the table displays, go to menu item Utilities -> Database Object -> Database Utility
In the resulting screen, under the "Status" fields, you should see text "Exists in the database." If you don't, then the table exists in the dictionary, but doesn't exist in the database system. Click the "Create database table" button and then you should be able to run the program.
You may need basis team's help to carryout some of these actions.

Advanced Table does not refresh after database level action

Hi,
I have a page which has an advanced table. I update the advanced table from the page do some validations, update some DB level columns(also part of advanced table) and see that the changes are saved to the DB but the advanced table does not show the updates done at the DB level.
I tried clearing the VO Cache and re-executing the VO but still it does not refresh the Advanced table data.
This is very critical requirement for the client, any inputs will be greatly appreciated.
Thanks a lot in Advance.
Here is the code snippet from my CO's processRequest:
OAApplicationModule am = pageContext.getApplicationModule(webBean);
OAAdvancedTableBean tblbean = (OAAdvancedTableBean)webBean.findChildRecursive("recasttable");
if(tblbean!=null)
tblbean.setRendered(true);
OAApplicationModule tblam = (OAApplicationModule)am.findApplicationModule("RecastLineAM1");
tblam.invokeMethod("initQuery");
tblbean.getTableData();
Here is my AM - initQuery() code:
public void initQuery()
//clearVOCaches("RecastLineEO",true);
clearVOCaches(null,true);
getRecastLineVO1().init();
Here is the VO - init() code:
public void init()
System.out.println("****************************executing...");
OADBTransaction tx = (OADBTransaction) getApplicationModule().getTransaction();
if (tx.getTransientValue("RECAST_ID") !=null)
Number recastId = (Number) tx.getTransientValue("RECAST_ID");
System.out.println("recastId: "+ recastId);
setWhereClause("RECAST_HDR_ID = :1");
setWhereClauseParams(null); // Always reset
setWhereClauseParam(0, recastId);
executeQuery();
}

hi,
This is how I am calling a DB package. the package does updates on the table. once done I am issueing a commit and requerying the data, however the vo is not getting refreshed.... Can someone point out what am I missing... why is the VO not getting refreshed....
This is very critical...
Thanks
Srini
public void validateRecast(String respKey)
OADBTransaction tx = (OADBTransaction)getApplicationModule().getTransaction();
Number recastId = (Number) tx.getTransientValue("RECAST_ID");
System.out.println("*********************validateRecast().RecastId: " + recastId);
OracleCallableStatement ocs = null;
Connection conn = tx.getJdbcConnection();
String strOut="", strErr="";
Number respId = null;
try
respId = new Number(respKey);
catch(Exception e)
throw new OAException("Invalid Responsibility");
String stmt = "BEGIN " +
"GE_RECAST_UTILS_PKG.validate_recast(:1,:2,:3,:4); " +
"END;";
try
ocs = (OracleCallableStatement)conn.prepareCall(stmt);
ocs.setNUMBER(1,recastId);
ocs.setNUMBER(2,respId);
ocs.registerOutParameter(3,OracleTypes.VARCHAR);
ocs.registerOutParameter(4,OracleTypes.VARCHAR);
ocs.execute();
strOut = ocs.getString(3);
strErr = ocs.getString(4);
ocs.close();
System.out.println("Returned with: " + strOut);
if(strOut.equalsIgnoreCase("ERROR"))
//throw new OAException(strErr);
tx.putTransientValue("ERROR",strErr);
tx.commit();
getApplicationModule().clearVOCaches("RecastLineEO",true);
RecastLineVOImpl lineVo = (RecastLineVOImpl)getApplicationModule().findViewObject("RecastLineVO1");
lineVo.init();
System.out.println("===============RecastLnId: " +lineVo.first().getAttribute("RecastLnId"));
System.out.println("===============Product Line: " +lineVo.first().getAttribute("ProductLine"));
catch(SQLException e)
tx.rollback();
if(ocs!=null)
try
ocs.close();
}catch(SQLException e1)
throw OAException.wrapperException(e1);
throw OAException.wrapperException(e);
}

Table can not activate again after changing

Hi, everybody
For some reason that we create one more field call EKORG(Purchasing organisation) in table LFA1 and made choice for both Key and Initial value. Now, we are going to delete this field and activate table again, system show the following message, please kindly give us a hand and let me know how to solve this issue in more detail. We use T-code: se14 and try to Activate and adjust database that system show the same message as below.
Thanks you All.
Primary key change not permitted for value table LFA1
Message no. AD300
Diagnosis
This table is defined as a check table. For reasons of consistency, changes to the primary key of the table are not allowed.
Procedure
If it is essential that you change the primary key, you must delete the relevant foreign keys. Refer to the where-used list to find all tables containing a field that is checked against this table. Delete the foreign keys for these fields.
If necessary, maintain the deleted foreign keys again.
Message was edited by:
Alfred

Alfred,
If you can't figure this out you should stop what you are doing and get help from someone who knows how to fix this mess. I'll give you a hint, it isn't Programs... And it might be something to do with tables... Once you've got a list of all tables where LFA1 is used you will have to check them 1 by 1 to see if they use LFA1 as a check table.
I'd still love to know what posessed you to mess around with the primary key of a standard SAP table? And I'd also love to know why everyone is giving you help and suggestions on how to activate the table whilst no-one seems to care that you are changing a standard SAP primary key. I can't believe you managed to get an access key to change the table in this way and no-one in your company/client questioned what and why you were doing it!
LFA1 is a pretty important table in the SAP system (Vendor Master table) so to mess around with its primary key is utterly ridiculous.
The only thing you should learn here is that changing SAP standard objects is usually a no-no. Trying to change the primary key on a standard SAP table is a complete no-no. There must have been an alternative to whatever it is you are trying to achieve.
Gareth.

SAP J2EE Engine JTA Transaction Xml for table TABLE could not be ana

I'm having a weird case. I created 3 entity bean. In my R/3 will call this JCO.Function to do the insert to database. But out of 3 entity bean, only 1 entity bean got error where it unable to insert to database and have this error in the log.
The case is quite weird where i created the same entity but only 1 entity is not working as expected. Wondering what cause this problem.
Thanks.
org.xml.sax.SAXException: Fatal Error: URI=:main: Line=1: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Name expected: 0x20(:main:, row:1, col:218)#
at com.sap.dictionary.database.dbs.XmlExtractor$XMLErrorHandler.fatalError(XmlExtractor.java:279)#
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:144)#
at com.sap.dictionary.database.dbs.XmlExtractor.map(XmlExtractor.java:130)#
at com.sap.dictionary.database.catalog.DbGeneralStructure.<init>(DbGeneralStructure.java:86)#
at com.sap.dictionary.database.catalog.XmlCatalogReader.getTable(XmlCatalogReader.java:90)#
at com.sap.sql.catalog.impl.BufferedCatalogReader.getTable(BufferedCatalogReader.java:124)#
at com.sap.sql.catalog.impl.BufferedCatalogReader.getTable(BufferedCatalogReader.java:87)#
at com.sap.sql.sqlparser.CheckColAndTabVisitor.checkTables(CheckColAndTabVisitor.java:299)#
at com.sap.sql.sqlparser.CheckColAndTabVisitor.performCatalogChecks(CheckColAndTabVisitor.java:176)#
at com.sap.sql.sqlparser.CommonSQLStatement.checkSemantics(CommonSQLStatement.java:169)#
at com.sap.sql.jdbc.common.StatementAnalyzerImpl.check(StatementAnalyzerImpl.java:35)#
at com.sap.sql.jdbc.common.StatementAnalyzerImpl.preprepareStatement(StatementAnalyzerImpl.java:101)#
at com.sap.sql.jdbc.common.StatementAnalyzerImpl.preprepareStatement(StatementAnalyzerImpl.java:87)#
at com.sap.sql.jdbc.common.AbstractCommonStatement.parseStatement(AbstractCommonStatement.java:472)#
at com.sap.sql.jdbc.common.CommonConnectionImpl.prepareStatement(CommonConnectionImpl.java:375)#
at com.sap.engine.services.dbpool.cci.ConnectionHandle.prepareStatement(ConnectionHandle.java:81)#
at net.tnb.model.ReasonCodeEntityBean3_0Persistent.ejb_iInsert(ReasonCodeEntityBean3_0Persistent.java:306)#
at com.sap.engine.services.ejb.entity.pm.UpdatablePersistent.ejbFlush(UpdatablePersistent.java:92)#
at com.sap.engine.services.ejb.entity.pm.TransactionContext.flushAll(TransactionContext.java:429)#
at com.sap.engine.services.ejb.entity.pm.TransactionContext.flush(TransactionContext.java:378)#
at com.sap.engine.services.ejb.entity.pm.TransactionContext.beforeCompletion(TransactionContext.java:506)#
at com.sap.engine.services.ejb.entity.SynchronizationList.beforeCompletion(SynchronizationList.java:136)#
at com.sap.engine.services.ts.jta.impl.TransactionImpl.commit(TransactionImpl.java:226)#
at net.tnb.model.ReasonCodeEntityHomeImpl3_0.create(ReasonCodeEntityHomeImpl3_0.java:546)#
at net.tnb.model.ReasonCodeEntityHome_Stub.create(ReasonCodeEntityHome_Stub.java:57)#
at net.tnb.model.EToGatewayBean.insertIntoTable(EToGatewayBean.java:223)#
at net.tnb.model.EToGatewayBean.processFunction(EToGatewayBean.java:166)#
at net.tnb.model.EToGatewayLocalLocalObjectImpl3_0.processFunction(EToGatewayLocalLocalObjectImpl3_0.java:175)#
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)#
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)#
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)#
at java.lang.reflect.Method.invoke(Method.java:324)#
at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277)#
at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219)#
at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:260)#
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)#
at java.security.AccessController.doPrivileged(Native Method)#
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)#
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)#
##0#0#Error##Java###{0}.commit(), Cannot commit due to unexpected exception in beforeCompletion():
[EXCEPTION]
{1}#2#SAP J2EE Engine JTA Transaction : [031fffffff3ffffffb2005b]#java.lang.IllegalStateException: Xml for table <TABLE> could not be analysed
 at com.sap.dictionary.database.catalog.XmlCatalogReader.getTable(XmlCatalogReader.java:100)
 at com.sap.sql.catalog.impl.BufferedCatalogReader.getTable(BufferedCatalogReader.java:124)
 at com.sap.sql.catalog.impl.BufferedCatalogReader.getTable(BufferedCatalogReader.java:87)
 at com.sap.sql.sqlparser.CheckColAndTabVisitor.checkTables(CheckColAndTabVisitor.java:299)
 at com.sap.sql.sqlparser.CheckColAndTabVisitor.performCatalogChecks(CheckColAndTabVisitor.java:176)
 at com.sap.sql.sqlparser.CommonSQLStatement.checkSemantics(CommonSQLStatement.java:169)
 at com.sap.sql.jdbc.common.StatementAnalyzerImpl.check(StatementAnalyzerImpl.java:35)
 at com.sap.sql.jdbc.common.StatementAnalyzerImpl.preprepareStatement(StatementAnalyzerImpl.java:101)
 at com.sap.sql.jdbc.common.StatementAnalyzerImpl.preprepareStatement(StatementAnalyzerImpl.java:87)
 at com.sap.sql.jdbc.common.AbstractCommonStatement.parseStatement(AbstractCommonStatement.java:472)
 at com.sap.sql.jdbc.common.CommonConnectionImpl.prepareStatement(CommonConnectionImpl.java:375)
 at com.sap.engine.services.dbpool.cci.ConnectionHandle.prepareStatement(ConnectionHandle.java:81)
 at net.tnb.model.ReasonCodeEntityBean3_0Persistent.ejb_iInsert(ReasonCodeEntityBean3_0Persistent.java:306)
 at com.sap.engine.services.ejb.entity.pm.UpdatablePersistent.ejbFlush(UpdatablePersistent.java:92)
 at com.sap.engine.services.ejb.entity.pm.TransactionContext.flushAll(TransactionContext.java:429)
 at com.sap.engine.services.ejb.entity.pm.TransactionContext.flush(TransactionContext.java:378)
 at com.sap.engine.services.ejb.entity.pm.TransactionContext.beforeCompletion(TransactionContext.java:506)
 at com.sap.engine.services.ejb.entity.SynchronizationList.beforeCompletion(SynchronizationList.java:136)
 at com.sap.engine.services.ts.jta.impl.TransactionImpl.commit(TransactionImpl.java:226)
 at net.tnb.model.ReasonCodeEntityHomeImpl3_0.create(ReasonCodeEntityHomeImpl3_0.java:546)
 at net.tnb.model.ReasonCodeEntityHome_Stub.create(ReasonCodeEntityHome_Stub.java:57)
 at net.tnb.model.EToGatewayBean.insertIntoTable(EToGatewayBean.java:223)
 at net.tnb.model.EToGatewayBean.processFunction(EToGatewayBean.java:166)
 at net.tnb.model.EToGatewayLocalLocalObjectImpl3_0.processFunction(EToGatewayLocalLocalObjectImpl3_0.java:175)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277)
 at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219)
 at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:260)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
#1.5 #001A6467CDF400590000004E000018D8000459BB785F496C#1224561620123#com.sap.engine.services.ts#sap.com/ESolutionsEGatewayEAR#com.sap.engine.services.ts#J2EE_GUEST#0####95b74d409f2411dd86c4001a6467cdf4#SAPEngine_Application_Thread[impl:3]_20##0#0#Error#1#/System/Server#Java#ts_0004##Exception in beforeCompletition of ( SAP J2EE Engine JTA Transaction : [031fffffff3ffffffb2005b] ).#1#SAP J2EE Engine JTA Transaction : [031fffffff3ffffffb2005b]#
#1.5 #001A6467CDF400590000004F000018D8000459BB785F4BC5#1224561620123#com.sap.engine.services.ts#sap.com/ESolutionsEGatewayEAR#com.sap.engine.services.ts#J2EE_GUEST#0####95b74d409f2411dd86c4001a6467cdf4#SAPEngine_Application_Thread[impl:3]_20##0#0#Error#1#/System/Audit#Java###Exception {0}#1#com.sap.engine.services.ts.exceptions.BaseRollbackException: Exception in beforeCompletition of ( SAP J2EE Engine JTA Transaction : [031fffffff3ffffffb2005b] ).
 at com.sap.engine.services.ts.jta.impl.TransactionImpl.commit(TransactionImpl.java:236)
 at net.tnb.model.ReasonCodeEntityHomeImpl3_0.create(ReasonCodeEntityHomeImpl3_0.java:546)
 at net.tnb.model.ReasonCodeEntityHome_Stub.create(ReasonCodeEntityHome_Stub.java:57)
 at net.tnb.model.EToGatewayBean.insertIntoTable(EToGatewayBean.java:223)
 at net.tnb.model.EToGatewayBean.processFunction(EToGatewayBean.java:166)
 at net.tnb.model.EToGatewayLocalLocalObjectImpl3_0.processFunction(EToGatewayLocalLocalObjectImpl3_0.java:175)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277)
 at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219)
 at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:260)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.lang.IllegalStateException: Xml for table ZREASON_CODE could not be analysed
 at com.sap.dictionary.database.catalog.XmlCatalogReader.getTable(XmlCatalogReader.java:100)
 at com.sap.sql.catalog.impl.BufferedCatalogReader.getTable(BufferedCatalogReader.java:124)
 at com.sap.sql.catalog.impl.BufferedCatalogReader.getTable(BufferedCatalogReader.java:87)
 at com.sap.sql.sqlparser.CheckColAndTabVisitor.checkTables(CheckColAndTabVisitor.java:299)
 at com.sap.sql.sqlparser.CheckColAndTabVisitor.performCatalogChecks(CheckColAndTabVisitor.java:176)
 at com.sap.sql.sqlparser.CommonSQLStatement.checkSemantics(CommonSQLStatement.java:169)
 at com.sap.sql.jdbc.common.StatementAnalyzerImpl.check(StatementAnalyzerImpl.java:35)
 at com.sap.sql.jdbc.common.StatementAnalyzerImpl.preprepareStatement(StatementAnalyzerImpl.java:101)
 at com.sap.sql.jdbc.common.StatementAnalyzerImpl.preprepareStatement(StatementAnalyzerImpl.java:87)
 at com.sap.sql.jdbc.common.AbstractCommonStatement.parseStatement(AbstractCommonStatement.java:472)
 at com.sap.sql.jdbc.common.CommonConnectionImpl.prepareStatement(CommonConnectionImpl.java:375)
 at com.sap.engine.services.dbpool.cci.ConnectionHandle.prepareStatement(ConnectionHandle.java:81)
 at net.tnb.model.ReasonCodeEntityBean3_0Persistent.ejb_iInsert(ReasonCodeEntityBean3_0Persistent.java:306)
 at com.sap.engine.services.ejb.entity.pm.UpdatablePersistent.ejbFlush(UpdatablePersistent.java:92)
 at com.sap.engine.services.ejb.entity.pm.TransactionContext.flushAll(TransactionContext.java:429)
 at com.sap.engine.services.ejb.entity.pm.TransactionContext.flush(TransactionContext.java:378)
 at com.sap.engine.services.ejb.entity.pm.TransactionContext.beforeCompletion(TransactionContext.java:506)
 at com.sap.engine.services.ejb.entity.SynchronizationList.beforeCompletion(SynchronizationList.java:136)
 at com.sap.engine.services.ts.jta.impl.TransactionImpl.commit(TransactionImpl.java:226)
 ... 16 more
#1.5 #001A6467CDF4005900000050000018D8000459BB785F4E8F#1224561620123#com.sap.engine.services.ejb.entity.Container#sap.com/ESolutionsEGatewayEAR#com.sap.engine.services.ejb.entity.Container#J2EE_GUEST#0####95b74d409f2411dd86c4001a6467cdf4#SAPEngine_Application_Thread[impl:3]_20##0#0#Error##Java###null
[EXCEPTION]
{0}#1#com.sap.engine.services.ejb.exceptions.BaseRemoteException: Transaction system failure in method net.tnb.model.ReasonCodeEntityHomeImpl3_0.create(net.tnb.model.ReasonCodeBean).
 at net.tnb.model.ReasonCodeEntityHomeImpl3_0.create(ReasonCodeEntityHomeImpl3_0.java:573)
 at net.tnb.model.ReasonCodeEntityHome_Stub.create(ReasonCodeEntityHome_Stub.java:57)
 at net.tnb.model.EToGatewayBean.insertIntoTable(EToGatewayBean.java:223)
 at net.tnb.model.EToGatewayBean.processFunction(EToGatewayBean.java:166)
 at net.tnb.model.EToGatewayLocalLocalObjectImpl3_0.processFunction(EToGatewayLocalLocalObjectImpl3_0.java:175)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277)
 at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219)
 at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:260)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.engine.services.ts.exceptions.BaseRollbackException: Exception in beforeCompletition of ( SAP J2EE Engine JTA Transaction : [031fffffff3ffffffb2005b] ).
 at com.sap.engine.services.ts.jta.impl.TransactionImpl.commit(TransactionImpl.java:236)
 at net.tnb.model.ReasonCodeEntityHomeImpl3_0.create(ReasonCodeEntityHomeImpl3_0.java:546)
 ... 15 more
Caused by: java.lang.IllegalStateException: Xml for table ZREASON_CODE could not be analysed
 at com.sap.dictionary.database.catalog.XmlCatalogReader.getTable(XmlCatalogReader.java:100)
 at com.sap.sql.catalog.impl.BufferedCatalogReader.getTable(BufferedCatalogReader.java:124)
 at com.sap.sql.catalog.impl.BufferedCatalogReader.getTable(BufferedCatalogReader.java:87)
 at com.sap.sql.sqlparser.CheckColAndTabVisitor.checkTables(CheckColAndTabVisitor.java:299)
 at com.sap.sql.sqlparser.CheckColAndTabVisitor.performCatalogChecks(CheckColAndTabVisitor.java:176)
 at com.sap.sql.sqlparser.CommonSQLStatement.checkSemantics(CommonSQLStatement.java:169)
 at com.sap.sql.jdbc.common.StatementAnalyzerImpl.check(StatementAnalyzerImpl.java:35)
 at com.sap.sql.jdbc.common.StatementAnalyzerImpl.preprepareStatement(StatementAnalyzerImpl.java:101)
 at com.sap.sql.jdbc.common.StatementAnalyzerImpl.preprepareStatement(StatementAnalyzerImpl.java:87)
 at com.sap.sql.jdbc.common.AbstractCommonStatement.parseStatement(AbstractCommonStatement.java:472)
 at com.sap.sql.jdbc.common.CommonConnectionImpl.prepareStatement(CommonConnectionImpl.java:375)
 at com.sap.engine.services.dbpool.cci.ConnectionHandle.prepareStatement(ConnectionHandle.java:81)
 at net.tnb.model.ReasonCodeEntityBean3_0Persistent.ejb_iInsert(ReasonCodeEntityBean3_0Persistent.java:306)
 at com.sap.engine.services.ejb.entity.pm.UpdatablePersistent.ejbFlush(UpdatablePersistent.java:92)
 at com.sap.engine.services.ejb.entity.pm.TransactionContext.flushAll(TransactionContext.java:429)
 at com.sap.engine.services.ejb.entity.pm.TransactionContext.flush(TransactionContext.java:378)
 at com.sap.engine.services.ejb.entity.pm.TransactionContext.beforeCompletion(TransactionContext.java:506)
 at com.sap.engine.services.ejb.entity.SynchronizationList.beforeCompletion(SynchronizationList.java:136)
 at com.sap.engine.services.ts.jta.impl.TransactionImpl.commit(TransactionImpl.java:226)
 ... 16 more
#1.5 #001A6467CDF4005900000051000018D8000459BB785F5FA9#1224561620123#System.err#sap.com/ESolutionsEGatewayEAR#System.err#J2EE_GUEST#0####95b74d409f2411dd86c4001a6467cdf4#SAPEngine_Application_Thread[impl:3]_20##0#0#Error##Plain###RemoteException insertOk=false#
#1.5 #001A6467CDF4005900000052000018D8000459BB785F6094#1224561620123#System.err#sap.com/ESolutionsEGatewayEAR#System.err#J2EE_GUEST#0####95b74d409f2411dd86c4001a6467cdf4#SAPEngine_Application_Thread[impl:3]_20##0#0#Error##Plain###Tue Oct 21 12:00:20 SGT 2008 java.rmi.RemoteException: com.sap.engine.services.ejb.exceptions.BaseRemoteException: Transaction system failure in method net.tnb.model.ReasonCodeEntityHomeImpl3_0.create(net.tnb.model.ReasonCodeBean).
 at net.tnb.model.ReasonCodeEntityHomeImpl3_0.create(ReasonCodeEntityHomeImpl3_0.java:573)
 at net.tnb.model.ReasonCodeEntityHome_Stub.create(ReasonCodeEntityHome_Stub.java:57)
 at net.tnb.model.EToGatewayBean.insertIntoTable(EToGatewayBean.java:223)
 at net.tnb.model.EToGatewayBean.processFunction(EToGatewayBean.java:166)
 at net.tnb.model.EToGatewayLocalLocalObjectImpl3_0.processFunction(EToGatewayLocalLocalObjectImpl3_0.java:175)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277)
 at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219)
 at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:260)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.engine.services.ts.exceptions.BaseRollbackException: Exception in beforeCompletition of ( SAP J2EE Engine JTA Transaction : [031fffffff3ffffffb2005b] ).
 at com.sap.engine.services.ts.jta.impl.TransactionImpl.commit(TransactionImpl.java:236)
 at net.tnb.model.ReasonCodeEntityHomeImpl3_0.create(ReasonCodeEntityHomeImpl3_0.java:546)
 ... 15 more
Caused by: java.lang.IllegalStateException: Xml for table <TABLE> could not be analysed
 at com.sap.dictionary.database.catalog.XmlCatalogReader.getTable(XmlCatalogReader.java:100)
 at com.sap.sql.catalog.impl.BufferedCatalogReader.getTable(BufferedCatalogReader.java:124)
 at com.sap.sql.catalog.impl.BufferedCatalogReader.getTable(BufferedCatalogReader.java:87)
 at com.sap.sql.sqlparser.CheckColAndTabVisitor.checkTables(CheckColAndTabVisitor.java:299)
 at com.sap.sql.sqlparser.CheckColAndTabVisitor.performCatalogChecks(CheckColAndTabVisitor.java:176)
 at com.sap.sql.sqlparser.CommonSQLStatement.checkSemantics(CommonSQLStatement.java:169)
 at com.sap.sql.jdbc.common.StatementAnalyzerImpl.check(StatementAnalyzerImpl.java:35)
 at com.sap.sql.jdbc.common.StatementAnalyzerImpl.preprepareStatement(StatementAnalyzerImpl.java:101)
 at com.sap.sql.jdbc.common.StatementAnalyzerImpl.preprepareStatement(StatementAnalyzerImpl.java:87)
 at com.sap.sql.jdbc.common.AbstractCommonStatement.parseStatement(AbstractCommonStatement.java:472)
 at com.sap.sql.jdbc.common.CommonConnectionImpl.prepareStatement(CommonConnectionImpl.java:375)
 at com.sap.engine.services.dbpool.cci.ConnectionHandle.prepareStatement(ConnectionHandle.java:81)
 at net.tnb.model.ReasonCodeEntityBean3_0Persistent.ejb_iInsert(ReasonCodeEntityBean3_0Persistent.java:306)
 at com.sap.engine.services.ejb.entity.pm.UpdatablePersistent.ejbFlush(UpdatablePersistent.java:92)
 at com.sap.engine.services.ejb.entity.pm.TransactionContext.flushAll(TransactionContext.java:429)
 at com.sap.engine.services.ejb.entity.pm.TransactionContext.flush(TransactionContext.java:378)
 at com.sap.engine.services.ejb.entity.pm.TransactionContext.beforeCompletion(TransactionContext.java:506)
 at com.sap.engine.services.ejb.entity.SynchronizationList.beforeCompletion(SynchronizationList.java:136)
 at com.sap.engine.services.ts.jta.impl.TransactionImpl.commit(TransactionImpl.java:226)
 ... 16 more
; nested exception is:
 javax.transaction.RollbackException: com.sap.engine.services.ts.exceptions.BaseRollbackException: Exception in beforeCompletition of ( SAP J2EE Engine JTA Transaction : [031fffffff3ffffffb2005b] ).
 at com.sap.engine.services.ts.jta.impl.TransactionImpl.commit(TransactionImpl.java:236)
 at net.tnb.model.ReasonCodeEntityHomeImpl3_0.create(ReasonCodeEntityHomeImpl3_0.java:546)
 at net.tnb.model.ReasonCodeEntityHome_Stub.create(ReasonCodeEntityHome_Stub.java:57)
 at net.tnb.model.EToGatewayBean.insertIntoTable(EToGatewayBean.java:223)
 at net.tnb.model.EToGatewayBean.processFunction(EToGatewayBean.java:166)
 at net.tnb.model.EToGatewayLocalLocalObjectImpl3_0.processFunction(EToGatewayLocalLocalObjectImpl3_0.java:175)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277)
 at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219)
 at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:260)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.lang.IllegalStateException: Xml for table ZREASON_CODE could not be analysed
 at com.sap.dictionary.database.catalog.XmlCatalogReader.getTable(XmlCatalogReader.java:100)
 at com.sap.sql.catalog.impl.BufferedCatalogReader.getTable(BufferedCatalogReader.java:124)
 at com.sap.sql.catalog.impl.BufferedCatalogReader.getTable(BufferedCatalogReader.java:87)
 at com.sap.sql.sqlparser.CheckColAndTabVisitor.checkTables(CheckColAndTabVisitor.java:299)
 at com.sap.sql.sqlparser.CheckColAndTabVisitor.performCatalogChecks(CheckColAndTabVisitor.java:176)
 at com.sap.sql.sqlparser.CommonSQLStatement.checkSemantics(CommonSQLStatement.java:169)
 at com.sap.sql.jdbc.common.StatementAnalyzerImpl.check(StatementAnalyzerImpl.java:35)
 at com.sap.sql.jdbc.common.StatementAnalyzerImpl.preprepareStatement(StatementAnalyzerImpl.java:101)
 at com.sap.sql.jdbc.common.StatementAnalyzerImpl.preprepareStatement(StatementAnalyzerImpl.java:87)
 at com.sap.sql.jdbc.common.AbstractCommonStatement.parseStatement(AbstractCommonStatement.java:472)
 at com.sap.sql.jdbc.common.CommonConnectionImpl.prepareStatement(CommonConnectionImpl.java:375)
 at com.sap.engine.services.dbpool.cci.ConnectionHandle.prepareStatement(ConnectionHandle.java:81)
 at net.tnb.model.ReasonCodeEntityBean3_0Persistent.ejb_iInsert(ReasonCodeEntityBean3_0Persistent.java:306)
 at com.sap.engine.services.ejb.entity.pm.UpdatablePersistent.ejbFlush(UpdatablePersistent.java:92)
 at com.sap.engine.services.ejb.entity.pm.TransactionContext.flushAll(TransactionContext.java:429)
 at com.sap.engine.services.ejb.entity.pm.TransactionContext.flush(TransactionContext.java:378)
 at com.sap.engine.services.ejb.entity.pm.TransactionContext.beforeCompletion(TransactionContext.java:506)
 at com.sap.engine.services.ejb.entity.SynchronizationList.beforeCompletion(SynchronizationList.java:136)
 at com.sap.engine.services.ts.jta.impl.TransactionImpl.commit(TransactionImpl.java:226)
 ... 16 more

Hi Stefan and Everyone,
I have solved my problem. Just want to let everyone know if u have to install the SP's for WEB AS 6.30/6.40.
You start from the installation from CD 6.30/6.40. Everything will be working at this point. You can login to Visual Admin, Config tool and SDM.
Before you apply any SP's, do the following:
a) Create an emergency user with the Administrator rights: Ref OSS Note:669848
Try to follow this route for SP's:
From CD 6.30/6.40 -> SP04 -> SP07
Apply SP04 first before applying SP07 (Recommended Approach).
Refer the installation guide: SAP Web AS Support Package Guide 630SP2 to 640SP4.
Use JDK1.4.2_05 to install SP04. You must reference the following OSS Notes and apply to your system accordingly, this is the key to an error free installation:
a) OSS Note: 697535
b) OSS Note: 709140
c) OSS Note: 716604
d) OSS Note: 706378
You have to be really careful with SP04 installation, because it changes the version from 6.30 -> 6.40.
Once you are able to install SP04 without any problems, you can directly apply SP07 or the highest 6.40 SP.
Kind Regards,
Buddha.

Selection in the master table is not getting reflected in the child table

 I have a 4 level master detail relationship.I have a bounded taskflow where I have a master in the first view.The child (The other two levels as a tree) in the second view.I move to second view when i click the command link(Each row has a command link) of the master table (present in the first view).
At the very first time when i try to insert a row in the child it's successful .I am able to see the same in the second view (The corresponding child of the master row which i have clicked).The 2 view is not refreshed i have panel strech layout in the 2 view which i am refreshing(PPR) on inserting the row. The master table is not refreshed as it is in the 1 view.I am not manipulating the master table but it was being set to the first row the second time .Added to that the 2 view doesn't have parent table .

Thanks,
Raj.

Hi Frank,
I am using jdev 11.1.1.6 and integrated wls.
I have a single taskflow.I have a 4 level master detail.The vo's are connected through a view link . I have dropped the first level as a table . On selecting a row the corresponding children are displayed.The children are displayed as a tree. I have a tree context menu where i have inserted a row using popup . When the user clicks on the ok dialog i am commiting the data and refreshing the tree.
Now the problem is when i first create the row it's working properly . After when i try to create another row this time the currency of the first level is reset to the first row.
As suggested by you i have tried disabling the commit opertion . But the issue still occurs.
Thanks,
Raj
Edited by: RajaSekharReddy.M on Feb 26, 2013 6:03 PM

Table entries not getting displayed in desired format

Hi All,
In my adobe layout I created a table . I used data format Align Right and align middle for the table entries. In the Output some entries of the table are not displaying in align right and align middle.
Output:In the below output the first row data is not in desired format .
Thanks in Advance,
Suneel.Uggina.

That is pretty to much information to help you.
You need to share your technical setting. How did you create the table? Subforms, Table-assistent... what are the values in? Format, what happens when you also pass more than 1 digit to the numbers in the first row, does it show up correct?
So please share more details and explain exact what you have tried to fix the issue. The community is able to help you, but not meant to suggest enaything you could have done.
~Florian

Base table is not getting updated

Hi friends,
am trying to update the attribute18 from the per_vacancies table by adding 1 to it
when am running the concurrent program it is not updating the table
what might be the reason
this is my code
CREATE OR REPLACE PACKAGE BODY apps.update_vacancy_pkg
IS
PROCEDURE update_vacancy_prc (p_err_buf OUT VARCHAR2, p_ret_code OUT NUMBER)
IS
l_object_version_number per_vacancies.object_version_number%TYPE;
l_vacancy_id per_vacancies.vacancy_id%TYPE;
l_inv_pos_grade_warning BOOLEAN;
l_inv_job_grade_warning BOOLEAN;
l_validate NUMBER := 0;
l_assignment_changed NUMBER;
l_return_status VARCHAR2 (240);
l_openings VARCHAR2 (240);
l_err_msg VARCHAR2 (200);
l_vac_id per_vacancies.vacancy_id%TYPE;
l_attr VARCHAR2 (100);
l_attr1 VARCHAR2 (100);
l_attr2 VARCHAR2 (100);
l_attr3 VARCHAR2 (100);
l_attr4 VARCHAR2 (100);
BEGIN
BEGIN
SELECT object_version_number, attribute7, vacancy_id
INTO l_object_version_number, l_openings, l_vac_id
FROM per_vacancies
WHERE vacancy_id IN (SELECT MAX (vacancy_id)
FROM per_vacancies);
EXCEPTION
WHEN OTHERS
THEN
l_vac_id := 0;
l_openings := 0;
END;
BEGIN
SELECT MAX (attribute18)
INTO l_attr
FROM per_vacancies;
SELECT (REGEXP_SUBSTR (l_attr, '.*C'))
INTO l_attr1
FROM DUAL;
SELECT REGEXP_REPLACE (l_attr, '^.*C(.+)$', '\1')
INTO l_attr2
FROM DUAL;
SELECT TO_NUMBER (l_attr2) + 1
INTO l_attr3
FROM DUAL;
SELECT l_attr1 || l_attr3
INTO l_attr4
FROM DUAL;
EXCEPTION
WHEN OTHERS
THEN
l_attr4 := 0;
END;
l_object_version_number := 0;
l_assignment_changed := 0;
l_return_status := 0;
per_vacancy_swi.update_vacancy
(p_validate => l_validate,
p_effective_date => SYSDATE,
p_vacancy_id => l_vac_id,
p_object_version_number => l_object_version_number,
p_number_of_openings => l_openings,
p_budget_measurement_value => l_openings,
p_attribute18 => l_attr4,
p_assignment_changed => l_assignment_changed,
p_return_status => l_return_status
COMMIT;
fnd_file.put_line (fnd_file.LOG, 'Executed Vacancy' || l_vac_id);
fnd_file.put_line (fnd_file.LOG,
'Assignment chaged = ' || l_assignment_changed
fnd_file.put_line (fnd_file.LOG, 'Return Status = ' || l_return_status);
fnd_file.put_line (fnd_file.LOG, 'l_attr4= ' || l_attr4);
END;
END;
it is hsowing in the log file with 1 added to the attribute18
but the table is not getting updated
can some one of you suggest a solution pls
thanks
Edited by: 776317 on Apr 27, 2011 9:15 PM
Edited by: 776317 on Apr 27, 2011 10:01 PM

but how come the seeded api has this
PROCEDURE update_vacancy
(p_validate in number default hr_api.g_false_num
,p_effective_date in date
,p_vacancy_id in number
,p_attribute17 in varchar2 default hr_api.g_varchar2
,p_attribute18 in varchar2 default hr_api.g_varchar2
.);Enable trace/debug, this may give you an idea about the data which is not saved.
Thanks,
Hussein

Data exists in DSO New table but not in Active table

Guys,
I am loading data from one DSO to another DSO, in my target DSO I have 6 fields which 2 of them are mapped in Transformation and remaining 4 will be populated by Start routine and End routines. Before Activating I am seeing all 6 fields got populated in New data table but after activating I am only seeing the 2 fields in Active data table but not those that are populated through Start and End rouitnes.
I have only one Key in my DSO, am I missing something here?please let me know.
Thanks,
KK

Hi,
beside end routine, there will be one icon.
click on that.
you will see two options.
select the option "populate values into fields with out active transformation rules"
don't remember the words correctly but gives the same meaning...
Activate the transformation.
this will solve your problem
Regards,
Raghu
Edited by: Raghu tej harish reddy on May 2, 2009 11:10 PM

Table is not in the same position form 1 page to next

Hi,
Following my earlier posts regarding my website and the lack
of text. I thought if I created a new index page with text and and
enter site button this would go some way to sorting out the
problem. The problem now is that the indes page table is not in the
same plase as the tables on the other pages. Any assistance on
getting these lined up would be much appreciated.
The URL for my site is:
http://www.martingreshoff.co.uk
The code for my new index page is as follows:

What are these (on the linked page)?
<a href="#" onMouseOut="MM_swapImgRestore()"
onMouseOver="MM_swapImage('Image8','','Resourses/Images/Gallery
Free
Second.jpg',1)"></a><a href="#"
onMouseOut="MM_swapImgRestore()"
onMouseOver="MM_swapImage('Image9','','Resourses/Images/Gallery 3
Fitted
second.jpg',1)"></a><a href="#"
onMouseOut="MM_swapImgRestore()"
onMouseOver="MM_swapImage('Image10','','Resourses/Images/Gallery 4
Box
Second.jpg',1)"></a>
If you had a menu row at the top of the table on this page,
like you do on
the other pages, the table would be in the same place. Just
put an empty
row up there....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"greshoff" <[email protected]> wrote in
message
news:[email protected]...
> Hi,
>
> Following my earlier posts regarding my website and the
lack of text. I
> thought if I created a new index page with text and and
enter site button
> this
> would go some way to sorting out the problem. The
problem now is that the
> indes
> page table is not in the same plase as the tables on the
other pages. Any
> assistance on getting these lined up would be much
appreciated.
>
> The code for my new index page is as follows:
>
> <meta name="keywords" content="timber, furniture,
wood, quality, hand
> crafted,
> custom made, free standing, bespoke, fitted furniture,
man made boards,
> fine,
> furniture maker, cabinet maker, wooden, tables, chairs,
bookcases, boxes,
> decorative boxes, craftsman, greshoff, Greshoff,
commissions, wood
> veneer,
> Martin">
> <meta name="description" content="Martin Greshoff
furniture maker with
> examples of free standing, fitted furniture &
decorative boxes in solid
> timber
> & man made boards"/>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <link rel="shortcut icon" href="favicon.ico" >
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
> <style type="text/css">
> 
> </style></head>
>
> <body>
> 
> 
> 
> <table width="733" height="475" border="0"
align="center"
> background="Resourses/Images/Home_Page.jpg">
> <tr>
> <td height="471" align="right" valign="top"> class="style2"> 
> class="style4">MARTIN
> GRESHOFF is a furniture maker who
produces 
> one off pieces of bespoke custom made furniture to 
> the highest standards of
>
craftsmanship.
> Inside you will find some
examples of some of
> the
> 
> commissions I have undertaken. 
> The following galleries are
included: 
> Free Standing
> Furniture with examples of
bookcases, 
> cabinets, tables, chairs, cupboards, cabinets and a
display case.
> 
> Fitted
Furniture with
> examples of a library, kitchens 
> and a dressing room.
> Decorative Boxes
with
> examples of Jewellery Boxes 
> with inlays & lift out trays and small trinket
boxes
> Press
with some of the
> published work relating to 
> Martin Greshoff Furniture.
> <img
> src="Resourses/Images/Enter_Site1.jpg" width="166"
height="39" border="0"
> usemap="#Map" />
> </td>
> </tr>
> </table>
>
> <map name="Map" id="Map">
> <area shape="rect" coords="1,-2,165,38"
href="Home.html" />
> </map>
> 
> <script type="text/javascript"
language="javascript">
> var sc_project=2215289;
> var sc_invisible=1;
> var sc_partition=20;
> var sc_security="dc3fe825";
> </script>
>
> <script type="text/javascript" language="javascript"
> src="
http://www.statcounter.com/counter/counter.js"></script><noscript><a
> href="
http://www.statcounter.com/"
target="_blank"><img
> src="
http://c21.statcounter.com/counter.php?sc_project=2215289&java=0&security=d
> c3fe825&invisible=1" alt="web site hit counter"
border="0"></a>
> </noscript>
> 
> <script
type="text/javascript"
> src="
http://www.ritecounter.com/c/47/46578.js"></script><noscript><a
> [links to
> '
http://www.ritecounter.com/c/47/46578.js"
> href="
http://www.ritecounter.com"><img
[links to
> '
http://www.ritecounter.com"
> src="
http://www.ritecounter.com/scripts/htmlc.php?id=46578
[links to
> www.ritecounter.com/scripts/htmlc.php?id=46578]"
alt="Simple Invisible
> Counter"
> border=0></a></noscript>
> </body>
> </html>
>

Excel 2010 Pivot Table VBA Not Refreshing Table

My company recently upgraded from Excel 2003 to 2010. I had VBA written to take source data and convert it into a number of Pivot Tables on a number of worksheets. It has been working fine for years. After upgrading to 2010 the VBA crashed. I tracked it
down to the fact that when my code was making changes to the Pivot Tables (changing fields, filters, etc...) the pivot table on the worksheet had no data, but the fields were there. I can manually go to the pivot table and manually refresh and all the data
comes in.
So I tried adding the VBA code to refresh the pivot table, but the pivot tables will not refresh with data.
I tried:
ActiveSheet.PivotTables("WO Pivot").RefreshTable
and
ActiveWorkbook.RefreshAll
And these did not work.
I also tried recording a macro for the manual steps to refresh and got:
ActiveSheet.PivotTables("WO Pivot").PivotCache.Refresh
This does not work either.
The PivotTable name is correct, but I tried using the number as well, and the name works for other code manipulating the the pivot table.
e.g.:
With ActiveSheet.PivotTables("WOPivot").PivotFields("Task Title")
.Orientation = xlRowField .Position = 2
.Subtotals = Array(False, False, False, False, False, False, False, False, False, False, _False, False)
End
With Why isn't this working? Is there another way to refresh pivot table data in 2010?
Thanks. P.S. I've tried formating this so it is readable, but it comes out garbled. Hope this looks better.

The solution above didn't work for me, but the following did the trick:
ActiveSheet.PivotTables("WOPivot").PivotCache.Refresh
By the way, I identified it by recording a macro, then going on the Pivot Table that needed refreshing and pressing F9 to refresh it. The line of VBA code above was the result.
Cheers,
Marco.

All values in internal table are not displaing in the script print program

Hi,
I am calling the script program.In main window all values in the internal table are not displaying. I wrote
write-form statement in loop. But not all the values are getting displayed. Only thel ast values getting dispalyed.
*& Report ZSCRIPT_116719
REPORT ZSCRIPT_116719.
************Table decleration***************
TABLES: mara, mbew, makt.
loop at i_makt into wa_makt.
endloop.
loop at i_MARA into wa_mara.
endloop.
LOOP AT I_MBEW INTO WA_MBEW.
ENDLOOP.
lv_price = 0.
********************Total Price******************
LOOP AT i_mbew INTO wa_mbew.
 lv_price = lv_price + wa_mbew-stprs.
ENDLOOP.
end-of-selection.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX =
ARCHIVE_PARAMS =
DEVICE = 'PRINTER'
DIALOG = 'X'
 FORM = 'ZSCRIPT_719'
 LANGUAGE = SY-LANGU
OPTIONS =
MAIL_SENDER =
MAIL_RECIPIENT =
MAIL_APPL_OBJECT =
RAW_DATA_INTERFACE = '*'
SPONUMIV =
IMPORTING
LANGUAGE =
NEW_ARCHIVE_PARAMS =
RESULT =
EXCEPTIONS
 CANCELED = 1
 DEVICE = 2
 FORM = 3
 OPTIONS = 4
 UNCLOSED = 5
 MAIL_OPTIONS = 6
 ARCHIVE_ERROR = 7
 INVALID_FAX_NUMBER = 8
 MORE_PARAMS_NEEDED_IN_BATCH = 9
 SPOOL_ERROR = 10
 CODEPAGE = 11
 OTHERS = 12
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'START_FORM'
EXPORTING
ARCHIVE_INDEX =
 FORM = 'ZSCRIPT_719'
 LANGUAGE = SY-LANGU
STARTPAGE = ' '
 PROGRAM = 'ZSCRIPT_116719'
MAIL_APPL_OBJECT =
IMPORTING
LANGUAGE =
EXCEPTIONS
FORM = 1
FORMAT = 2
UNENDED = 3
UNOPENED = 4
UNUSED = 5
SPOOL_ERROR = 6
CODEPAGE = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*LOOP AT I_MBEW INTO WA_MBEW.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
 ELEMENT = 'DATA'
 FUNCTION = 'SET'
 TYPE = 'BODY'
 WINDOW = 'MAIN'
IMPORTING
PENDING_LINES =
EXCEPTIONS
 ELEMENT = 1
 FUNCTION = 2
 TYPE = 3
 UNOPENED = 4
 UNSTARTED = 5
 WINDOW = 6
 BAD_PAGEFORMAT_FOR_PRINT = 7
 SPOOL_ERROR = 8
 CODEPAGE = 9
 OTHERS = 10
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*ENDLOOP.
If I give only one value it is showing the output. When I am fetching the data for range of values it i sshowing start_form is not there.
Plz let me know how to get the aa internal table values to be displayed

hi
I shortened your program a bit. So we can go to essentials of your question.
You said you put in it in a loop.
What i see in your prog is:
REPORT zscript_116719.
************table decleration***************
TABLES: mara, mbew, makt.
LOOP AT i_makt INTO wa_makt.
ENDLOOP.
LOOP AT i_mara INTO wa_mara.
ENDLOOP.
LOOP AT i_mbew INTO wa_mbew.
ENDLOOP.
lv_price = 0.
********************total price******************
LOOP AT i_mbew INTO wa_mbew.
lv_price = lv_price + wa_mbew-stprs.
ENDLOOP.
END-OF-SELECTION.
CALL FUNCTION 'OPEN_FORM'
 EXPORTING
 form = 'ZSCRIPT_719'
 language = sy-langu.
CALL FUNCTION 'START_FORM'
 EXPORTING
 form = 'ZSCRIPT_719'
 language = sy-langu
 program = 'ZSCRIPT_116719'.
*LOOP AT I_MBEW INTO WA_MBEW.
CALL FUNCTION 'WRITE_FORM'
 EXPORTING
 element = 'DATA'
 function = 'SET'
 type = 'BODY'
 window = 'MAIN'.
*endloop.
1. Your loop is not a loop with this '*' in front of it.
2. Are you printing &wa_mbew-???& variables in your sap-script
3. is itab I_MBEW properly filled
Let me know.
Gr. Frank

Table does not exist - DbLink

Hello, I have 2 instances, into production environment, instance A and instance B. Into instance A I have a dblink to instance B...
The problem appear when I want to see the indexes of a table of instance B from instance A, to do this I press F4 into TOAD over:
owner.table@dblink
and when I click into tab "Indexes", Oracle said me: "The table does not exist", I review the grants, and this is ok, and the table exist in instance B.
One explanation, I have the same environment into testing, and there work perfectly, I have the same dblinks, the same users and the same grants.
Any suggestion to help me.

You may want to contact the folks that make TOAD.
My guess is that TOAD is querying the local USER_/ ALL_/ DBA_INDEXES table rather than the USER_/ ALL/ DBA_INDEXES table at the remote server. You could run a client-side SQL trace to see what SQL is being generated to see if the problem is that TOAD is generating the incorrect SQL or whether there is some problem with the database. But I'm not sure how productive that would be since it's not like you could fix the SQL TOAD is submitting. If there is an option in TOAD that changes the behavior here, it's certainly possible that someone here will know it. But TOAD support is probably more likely.
Justin

Table does not exist for the sys user

Hey Everyone,
I am having a strange problem with 10G 10.2. I keep getting the table does not exist for all the tables when I am logged in as sys. It is strange because I can query the same tables being logged in as a regular user say 'scott'. I can't figure out what the problem is since it could not be privileges because the user is sys. Is there something I am missing here. Any advice would be welcome.
Thanks,
Sarang

Yeah i am using the query....
SELECT * FORM SCOTT.EMP
It is a little wierd. I did a full database restore yesterday night. I dont know if that has anything to do with this. Will have to take a look at the logs.

Table is not in nametab

Similar Messages

Maybe you are looking for