Table maintainance (restriction on displaying fields)
hello
i have created table maintainance generator.now my requirement is i dont want to display all table fields.just 2 fields want to display.all other should be in invisible.can anybody suggest me how to do it?
regards
soniya s.
Hi Soniya ,
To Hide one of the field from table into the Table Maintainance generator,
Call one module Say :
MODULE Hide in the PBO of the Module pool of table maintainance generator Program.
Write the Following code in above module :
MODULE Hide OUTPUT.
LOOP AT SCREEN.
IF screen-name = 'ZGIFT_DISPATCH-MAKTX'.
screen-invisible = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDMODULE. " Hide OUTPUT
Replace the name of field accordingly in IF condition.
It will Work.
Thanx and Regards,
Nikhil Joshi
Similar Messages
-
Import Manager and Display Fields
I've been using SRM-MDM 3.0 for a couple of months and 1 fundamental MDM design has always bothered me and I was hoping to get some resolve on this.
The purpose of Display Field is 2 folds:
1. Display the field in the Catalog Search UI for a lookup table: i.e. if both Supplier Name and ID are Display Fields, then in the Search UI, both fields are displayed to the end-user. If only Supplier ID was the display field, then in the UI only the ID is displayed.
- From a usability pov, tables such as Supplier and Product Group should have the name or description fields displayed in the Search UI as the numeric values are meaningless to the end-users.
2. Display field ALSO affect what is the key used to import data into a table. So if Supplier ID is the display field for Supplier table, then in Import Manager, the Supplier ID values are displayed and must be mapped to the source values.
- From an importing pov, mapping values should always be an index-like field, such as Supplier ID or Product Group ID, or ISO, and usually never the actual name or description field.
But SAP has tied the two together. So in order to display the name/description to the end-user, we must enable the name/description field as a Display Field. But we also want to map based on the index/ID field, so we also enable the index/ID field as a Display Field. Now in Import Manager, we have two Display Fields for a table (i.e. Supplier ID and Supplier Name for Supplier table) and I've noticed some issues with this:
1. You import file must have BOTH values (index/ID and the name/description fields) in the source, in order to Automap. If your source file only has 1 field, like in MECCM when extracting ECC contract, ONLY the Supplier ID, or Category ID is extracted, Automap is not possible. What is funny is that standard SAP extract program only extracts the ID fields, BUT the standard SAP repository has the name/description fields as the Display Field. Automap is a must for tables like Product Group where hundreds of lines can make manual mapping a pain.
2. I also noticed you cannot Add values to a table that has 2 Display Fields, you can only map to existing values. The Add button is grayed out.
With all that said, when you're replication ECC Contract Data using MECCM, for tables like Supplier and Product Group, what fields should be set as Display Fields, and if there are multiple Display Fields, what special setting needs to be done in Import Manager to enable automapping? Even standard SAP Import Map (_MDMContractDataTransmission_ProductID) throws errors when multiple fields are set as Display Fields.
I'm not familiar with the partitioning function, and I've seen PDF's about it, but don't really see how it could be helpful. I've also read someone suggesting changing the DF's before import, which I think is unacceptable, as this requires unloading/loading repositories everytime an import happens.
Thanks for reading my paragraph and any input is greatly appreciated.
Edited by: Derek Xu on Apr 30, 2009 6:50 PMHi Derek,
Thanks for writing your thoughts. I would like to provide some information on one of your points where in you have mentioned that :
You import file must have BOTH values (index/ID and the name/description fields) in the source, in order to Automap. If your source file only has 1 field, like in MECCM when extracting ECC contract, ONLY the Supplier ID, or Category ID is extracted, Automap is not possible.
I completely agree that if you have 2 fields in MDM repository and you are only importing only one of them, then you cannot use the Automap feature of Import Manager. So in your case, the description is not getting importing, so you cannot use Automap in that case.
I had a very similar requirement in one of my project and we went with creation of a Import Value template. We created a template with all the possible values for all the look up tables in that and mapped it once in the Map. Hence, next time, the Map was used to automatically Map the source and Destination values for all the look up tables.
SAP-MDM Automatic Import Requirement u2013 Creation of a Value Mapping Template:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80ad0cff-19ef-2b10-54b7-d4c7eb4390dd
Please read the above article and hope its useful. You can go for this approach in your case if suitable.
I have mentioned examples of descriptions and their respective fields in the article.
Hope it helps.
Thanks and Regards
Nitin jain -
Displaying fields from a Z Table on CRM UI
Hello Experts
I am trying to display fields from a custom table onto a CRM UI form view.
1. I created a custom GENIL root object & Search object ie. ZCUSTOMER. & ZCUSTSEARCH
2. Tested this in the GENIL BROWSER to ensure that I could enter update values to the table and retrieve it via the search object.
3. Created a custom component ZCUSTOMER
4. Created a view with this component ZCUSTOMER using the wizard -
Model Name - CUSTINFO
BOL Entity - ZCUSTOMER
No links to the custom controller or higher level objects.(as I do not want to tie this to any standard components)
Type of view - Form view
7. Created a Context node for the component controller with the same info as I did for the view.
8. Performed the binding of the view context node with the component controller context node.
9. Configured 1 field CUST_NAME to be displayed on the view.
10. Configured the run time repository to display the view.
Now the issue is..
When the view gets displayed, the field is displayed with the error "CUST_NAME not bound"
What am i missing?
Thanks
RLXHi Swati,
Thanks for the feedback. I re-viewed the WD_CREATE_CONTEXT method of the view controller implementation class and I see the following code in there already-
method WD_CREATE_CONTEXT.
create the context
context = cl_bsp_wd_context=>get_instance(
iv_controller = me
iv_type = 'ZL_ZCUSTOMER_BSPWDCOMPONEN_CTXT' ).
typed_context ?= context.
endmethod.
Does that look right or do I need to modify it?
Thanks once again for the help.
RLX -
How to add new field to table control data not displayed
hi
I have added some nwe fields to already existing table control added three new fields...
though the recoreds are inserted in teh table properly with the three new fields user id data and time fields
but on display only the data is not shown in these three columns though the data is coming in internal table...but not to the screen output
pls suggest where the problme may be
nishantFirst try the small button Configuration on top right of the table control, as displayed when you run the program. Hit 'Administrator' and see if the fields are checked as invisible. Uncheck them, activate and save.
If the fields are not in that list at all, then check if the table control is initialized for the screen you use. For example
CONTROLS: tc_ent_lines TYPE TABLEVIEW USING SCREEN '0100'.
but you copied your screen and use the same table control in the new screen 0200. Then all you have to do is
REFRESH CONTROL 'TC_ENT_LINES' FROM SCREEN '0200'.
before you show the screen. -
Hi,
I am using dynamic table concepts.I am using field symbols.I need to maintain two tables of similar structure.
when i append data it will enter into both tables.when i unassign first table and reassign it ,i am getting back that data again into first table ..how to slve this problem.i need to start first table as fresh table and second table contain copy of the first table.Hi,
maybe you should clarify your problem a bit more by pasting some code and try to explain it a bit more in detail.
Roy -
Drop down list for a field in table maintainance
Hi,
I have created a table maintainance for ztable. I need a drop down list for field so that user can select values present in the list while giving entries.
I can not use fixed values in domain, because feild length is more and it wont fit into fixed values.
I am trying to use VRM_SET_VALUES FM but not getting output. Can any one help me on this.
Thank you,
Regards,
Kusuma K.TYPE-POOLS: vrm. Include this in your program
DATA: l_name TYPE vrm_id,
l_list TYPE vrm_values,
l_value LIKE LINE OF l_list.
LOOP AT it_paym INTO w_paym.
l_value-key = w_paym-pay_method.
l_value-text = w_paym-text.
APPEND l_value TO l_list.
ENDLOOP.
l_name = 'Table-field'. change it as per your requirement this has to be perfect
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = l_name
values = l_list
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Hope it helps you,
Abhijit G. Borkar -
Date field is missing in the Table maintainance generator
Hi,
A table is created. A date field is there in that table. I tried to create a table maintainance generator for this table using 2 screens. Table maintainance generator is created. But when I go to SM30 , I am unable to see this <b>DATE</b> field in the SM30 , in the first screen. But when I go to maintainance screen , I am able to see this field. This particularly happening with date field.
Could you please help me.
Regards,
Satyago to se11 and type the table what you want.
utilities, table maintenance generator.
you config the options that you need.
press F6 and go to sm30.
its only this.
Regards -
Non-display fields in Qualified Table to be displayed in ItemDetail iView
Hello expert,
Is it possible to display a non display field in Qualified Table in ItemDetailed iView?
It seems not possible by standard iView configuration.
Is it possible to achieve by some minor coding? If possible, such code is appreciated.
Thank you.
DaleHi Dale,
Yes, it is possible , and no need to do any custome coding. You can configure non-Display field of Qualified table to be displayed in Standard item detail iview.
You have to select Qualified look up field if you are creating Item iview on Main table and complete all steps.
once you complete all steps, open Item iview , select Reletionship and qualified display field option .
now you can see qualiied tables in table , click on Edit , now you can see all fields of qualified table.. you can select any field (dis/non-dis fields).
Hopw this helps you.
Thanks & Regards,
Veera. -
Dear Experts,
I hv created a ztable containing following fields.
MANDT MANDT Primary Key
ZVEHICLE ZSDVEHICLE Primary Key
ZDCODE ZDCODE Primary Key
ZOUT_DATE ZDATUM Primary Key
ZOUT_TIME ZOUT_TIMS Primary Key
ZOUT_READING ZMTR_READ
ZIN_DATE ZDATUM_IN
ZIN_TIME ZIN_TIMS
ZIN_READING ZMTR_READ
ZSTATUS ZSTAT ( IN , OUT values possible)
ZREMARKS ZCHAR50
Now i m trying to create a Table Maintainance Generator And the Problem is following two fields are not visible in TMC.
ZIN_DATE ZDATUM_IN
ZIN_TIME ZIN_TIMS
But if i add another field with other data type ( other than time and date), that field is visible.
And if i include above two field in primary key, then only it is visible.
Is ther any restriction with time and date format field with TMC.
Any idea.
thansks in advance.
JaspalHi Jaspal,
There are two maintenance types available while creating a table maintenance generator.
1. One step
2. Two step
If the TMG is built in one-step, then all the fields (both key and non-key fields) will be displayed in a single screen. So, all your fields will get displayed.
Whereas if the TMG is built in two-step, the key fields will be displayed in a single screen and further details will be displayed in another screen. In this table, you have set the fields 'ZOUT_DATE' and 'ZOUT_TIME' as primary key. so it will be displayed in one screen and the non-key fields will be displayed in the second screen. So, if the fields 'ZIN_DATE' and 'ZIN_TIME' were to be dispalyed in the first screen, make it as a primary key.
Thanks and Regards,
Priya -
In table maintainance generator
hi
in table maintainance generator, how to validate the data entered in the table. If it is only with the events, how?hi,
you can validate the data in tables, after generating a table maintanance generator.
Environment->Modification->Events.
After providing the subroutine name you can go to editor( click on icon provided just besides the form routine) and write the logic for validation.
for example, if changes are to be made to the data of particular controlling area, a check has to be made if the user is authorised to make changes. Below is a sample code that would give you an idea.
Sample code:
*& Form auth_check_save
Checks that the user has the correct authorisations to Change
details of Controlling Area. If not error message is to be
displayed on the screen.
form auth_check_save.
Data Declaration
Types
types: begin of ty_valtab,
kokrs(4) type c,
actvt(2) type c,
end of ty_valtab,
begin of ty_fieldtab,
fieldname(10) type c,
end of ty_fieldtab.
Internal Tables
data: lt_valtab type standard table of ty_valtab,
lt_fieldtab type standard table of ty_fieldtab,
Structures
ls_valtab type ty_valtab,
ls_fieldtab type ty_fieldtab,
ls_costele type ztf_costele,
Variables
l_status type zss_rfc_status,
l_st(1) type c.
Constants
constants : c_0(1) type c value '0',
c_01(2) type c value '01',
c_02(2) type c value '02',
c_06(2) type c value '06',
c_authobj(10) type c value 'Z_KOKRS',
c_error(5) type c value 'ERROR',
c_partial(7) type c value 'PARTIAL',
c_kokrs(5) type c value 'KOKRS',
c_actvt(5) type c value 'ACTVT'.
clear l_status.
ls_fieldtab-fieldname = c_kokrs.
append ls_fieldtab to lt_fieldtab.
clear ls_fieldtab.
ls_fieldtab-fieldname = c_actvt.
append ls_fieldtab to lt_fieldtab.
clear ls_fieldtab.
loop at total.
if <action> eq neuer_eintrag.
move total to ls_costele.
ls_valtab-kokrs = ls_costele-kokrs.
ls_valtab-actvt = c_01.
append ls_valtab to lt_valtab.
clear ls_valtab.
elseif <action> eq aendern.
move total to ls_costele.
ls_valtab-kokrs = ls_costele-kokrs.
ls_valtab-actvt = c_02.
append ls_valtab to lt_valtab.
clear ls_valtab.
elseif <action> eq geloescht.
move total to ls_costele.
ls_valtab-kokrs = ls_costele-kokrs.
ls_valtab-actvt = c_06.
append ls_valtab to lt_valtab.
clear ls_valtab.
endif.
endloop.
Authorization Check
call function 'ZAUTH_CHECK'
exporting
PIM_REPID =
pim_auth_obj = c_authobj
PIM_FIELD_TABNAME =
PIM_CHECKALL =
importing
pex_status = l_status
tables
pex_val_tab = lt_valtab
pim_field_tab = lt_fieldtab
exceptions
no_input = 1
others = 2.
if l_status = c_error. "Authorization Check
message under class: zmessclass
message e000(zmessclass) with text-e02. "You have no authorization
"for table maintenance
elseif l_status = c_partial.
loop at total.
if <action> ne space.
move total to ls_costele.
read table lt_valtab with key kokrs = ls_costele-kokrs
transporting no fields.
if sy-subrc <> c_0.
delete table total.
delete table extract.
endif.
endif.
endloop.
message e400(zmessclass). "All the entries could not be saved
"because of restricted authorization
endif. "End of Authorization Check
endform. "auth_check_save
The above code should be written in event 01 : Before saving the data in the database
Regards,
Farheen -
Disable delete button in Table Maintainance Generator
Hello all,
How to disable delete button in Table maintainance generator???Hi Maya,
It is very interesting question. If you debug your table maintenance screen, the program of table maintenance screen will not have statically defined pf status. So you cannot exclude delete functionalities using the below statement.
SET PF-STATUS <the GUI status> EXCLUDING 'DELE'.
For viewing pf status SAP has programmed in dynamic manner using this FM VIEW_SET_PF_STATUS.
Before calling above FM you need to exclude delete function. Follow the following step for achieving this
Go to sm30. Put your table name and press on maintain push button. It will display table entries in maintenance screen.
Go to system->status
Click on program name.
Go to your flow logic of you table maintenance screen number.
It will have following code in flow logic
PROCESS BEFORE OUTPUT.
MODULE LISTE_INITIALISIEREN.
LOOP AT EXTRACT WITH CONTROL
TCTRL_ZMAINTAIN CURSOR NEXTLINE.
MODULE LISTE_SHOW_LISTE.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE LISTE_EXIT_COMMAND AT EXIT-COMMAND.
MODULE LISTE_BEFORE_LOOP.
LOOP AT EXTRACT.
MODULE LISTE_INIT_WORKAREA.
CHAIN.
FIELD ZMAINTAIN-MATNR .
FIELD ZMAINTAIN-KUNNR .
FIELD ZMAINTAIN-LIFNR .
MODULE SET_UPDATE_FLAG ON CHAIN-REQUEST.
ENDCHAIN.
FIELD VIM_MARKED MODULE LISTE_MARK_CHECKBOX.
CHAIN.
FIELD ZMAINTAIN-MATNR .
MODULE LISTE_UPDATE_LISTE.
ENDCHAIN.
ENDLOOP.
MODULE LISTE_AFTER_LOOP.
Add new module in PBO for excluding delete function. ex module set_pf.
PROCESS BEFORE OUTPUT.
****here I added my own code for excluding delete function
****begin of addion
module set_pf.
****end of addition
MODULE LISTE_INITIALISIEREN.
LOOP AT EXTRACT WITH CONTROL
TCTRL_ZMAINTAIN CURSOR NEXTLINE.
MODULE LISTE_SHOW_LISTE.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE LISTE_EXIT_COMMAND AT EXIT-COMMAND.
MODULE LISTE_BEFORE_LOOP.
LOOP AT EXTRACT.
MODULE LISTE_INIT_WORKAREA.
CHAIN.
FIELD ZMAINTAIN-MATNR .
FIELD ZMAINTAIN-KUNNR .
FIELD ZMAINTAIN-LIFNR .
MODULE SET_UPDATE_FLAG ON CHAIN-REQUEST.
ENDCHAIN.
FIELD VIM_MARKED MODULE LISTE_MARK_CHECKBOX.
CHAIN.
FIELD ZMAINTAIN-MATNR .
MODULE LISTE_UPDATE_LISTE.
ENDCHAIN.
ENDLOOP.
MODULE LISTE_AFTER_LOOP.
*****inclule one line of code for excluding delete fucion
module set_pf output.
MOVE 'DELE' TO excl_cua_funct-function. COLLECT excl_cua_funct.
endmodule.
Basically sap fetching status dynamically from program SAPLSVIM using FM VIEW_SET_PF_STATUS. Status name is EULG.
Please donu2019t hardcode anything by using set pf status statment, you just add one line of code the PBO by creating new module.
Let me know if you need any help .
Cheers.
Regards,
Peranandam -
Getting dump in table maintainance generator
hi friends ,
in dev system and production iam able to maintain data in the table ,but in quality i am getting dump.
my error is bellow,
Runtime Errors DYNPRO_FIELD_CONVERSION
Date and Time 20.03.2009 14:11:59
Short text
Conversion error
What happened?
The current screen processing action was terminated since a situation
occurred where the application could not continue.
This is probably due to an error in the ABAP program or in the current
screen.
Error analysis
The program has been interrupted and cannot resume.
Program "SAPLY_J_2IRG1BAL" attempted to display fields on screen 0001.
An error occurred during the conversion of this data.
Trigger Location of Runtime Error
Program SAPLY_J_2IRG1BAL
Include LSVIMOXX
Row 253
Module type (MODULE PBO)
Module Name LISTE_SHOW_LISTEHi Sudheer,
Did you add any FLTP field in table and generating table maintenance generator for the same? FLTP type of field can't be displayed on screen or in SM30, They need to be converted to CHAR before displaying. Please check for the same.
Edited by: Gaurav Mishra on Mar 20, 2009 12:08 PM -
How to restrict values displayed using a select-options
Can someone please tell me how to restrict values displayed using a select-options.
Example- in my table I have 100 entries. However when the user will click on the required field- I want to be display only 25 options based on a given value of another field in the table.
Thanks,
Mahesh.get the screen value for the selectd field using the fm
DYNP_VALUES_READ.
for that value filter the internal table values and pass the table to f4 help of the field.
below code will help u
write the f4 help for the field.
At Selection Screen on value request *
F4 help for Corporate
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_CORP.
Get Corporates for selected division
PERFORM GET_CORP.
PERFORM F4HELP_CORP.
*& Form GET_CORP
Get the corporates for the selected division
There are no interface parameters to be passed to this routine
FORM GET_CORP .
Table for conglomerate
DATA:
LT_CONG LIKE STANDARD TABLE OF FS_CORP,
Fields of current screen
LFS_DYNPREAD TYPE DYNPREAD,
Table for current Screen fields
LT_DYNPREAD LIKE STANDARD TABLE OF LFS_DYNPREAD.
LFS_DYNPREAD-FIELDNAME = 'P_DIV'.
APPEND LFS_DYNPREAD TO LT_DYNPREAD.
Get selection screen value for division
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = SY-REPID
DYNUMB = SY-DYNNR
TABLES
DYNPFIELDS = LT_DYNPREAD
EXCEPTIONS
INVALID_ABAPWORKAREA = 1
INVALID_DYNPROFIELD = 2
INVALID_DYNPRONAME = 3
INVALID_DYNPRONUMMER = 4
INVALID_REQUEST = 5
NO_FIELDDESCRIPTION = 6
INVALID_PARAMETER = 7
UNDEFIND_ERROR = 8
DOUBLE_CONVERSION = 9
STEPL_NOT_FOUND = 10
OTHERS = 11.
IF SY-SUBRC EQ 0.
READ TABLE LT_DYNPREAD INTO LFS_DYNPREAD INDEX 1.
IF SY-SUBRC EQ 0.
P_DIV = LFS_DYNPREAD-FIELDVALUE.
ENDIF. " IF SY-SUBRC EQ 0
ENDIF. " IF SY-SUBRC EQ 0
REFRESH T_CORP.
Get the conglomerate for the selected division
SELECT KUNNR " Conglomerate
FROM KNVH
INTO TABLE LT_CONG
WHERE HITYP EQ C_HITYP
AND VKORG EQ C_VKORG
AND VTWEG EQ C_VTWEG
AND SPART EQ P_DIV
AND DATAB LE SY-DATUM
AND DATBI GE SY-DATUM
AND HKUNNR EQ SPACE.
IF SY-SUBRC EQ 0.
SORT LT_CONG BY KUNNR.
DELETE ADJACENT DUPLICATES FROM LT_CONG
COMPARING KUNNR.
Get the corporates for the selected conglomerates
SELECT KUNNR " Customer Number
FROM KNVH
INTO TABLE T_CORP
FOR ALL ENTRIES IN LT_CONG
WHERE HITYP EQ C_HITYP
AND VKORG EQ C_VKORG
AND VTWEG EQ C_VTWEG
AND SPART EQ P_DIV
AND DATAB LE SY-DATUM
AND DATBI GE SY-DATUM
AND HKUNNR EQ LT_CONG-KUNNR.
IF SY-SUBRC NE 0.
CLEAR: SSCRFIELDS.
MESSAGE I531(0U) WITH TEXT-005.
STOP.
ENDIF. " IF SY-SUBRC NE 0
ELSE.
CLEAR: SSCRFIELDS.
MESSAGE I531(0U) WITH TEXT-004.
STOP.
ENDIF. " IF SY-SUBRC EQ 0
ENDFORM. " GET_CORP
*& Form F4HELP_CORP
F4 help for corporate
There are no interface parameters to be passed to this routine
FORM F4HELP_CORP .
F4 help for corporate
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'KUNNR'
DYNPPROG = 'Z_EXCESS_USAGE'
DYNPNR = '1000'
DYNPROFIELD = 'P_CORP'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = T_CORP
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
IF SY-SUBRC EQ 0.
Do nothing
ENDIF. " IF SY-SUBRC EQ 0
ENDFORM. " F4HELP_CORP -
How to get serial no automatically in table maintainance generator
Hello Experts,
I am building table maintainance generator in that i want the serial number shold be displayed or generated for new entry automatically.
please mind this, i am going to put more that one entry at single time and my serial number field is primary key in table .
Thanks,
GauravIn table maintenance we can add an event during new entries creation, in that add code to read the table for the last entry and increment one to it. Hence whenever a new entry is created serial number value is generated.
-
Table Maintainance Generated but getting error when running SM30
Hi Experts,
I am modifying existing ZTable with around 31 fields and Maintainance was not allowed before also no Table maintainance was there. Now i have changed the attributes to allow maintainance and tried creating Table Maintainance generator.
The TMG get created sucessfully but get error message when running SM30 for the Ztable with Run time error saying Coversion Error .
Error Analysis says :
Program SAPLZNMSLG attempted to display the fields of screen 0005 and error occured during the coversion of this data.
Can any one let me know what happened? Expecting replies at the earliest.
Thanks
SmitaHi,
In Text I/O Template Tab each field name will be there with Column- Name, Type and Text Or I/O Field
Go to Text OR I/O Field (Fields Wherever u have negative value).
Name Type Text Or I/O Field
vbak-menge I/O _.___.___.___,____V
Just add existing blank field ending with V.
Regards,
Nandha
Maybe you are looking for
-
Error -54 with windows 8.1 and iOS 7.1.2
I tried adding two albums to my iTouch 5 with windows 8.1 and recently updated my iTouch's OS to version 7.1.2. I keep getting the error -54, saying it couldn't be synced but it still keeps sycing and comes up a lot. I tried restoring my iTouch and r
-
My install fails because 'reboot' is needed
I want to install "Sql Server Management Studio" so I can manage a remove database from my PC. The installation first checks some rules, and one of them fails. I clicked 'details" on the error message and got: RebootRequiredCheck</td> Checks if a pen
-
Printing from Firefox shows double and triple-spaciong. How can I fix this?
Printing from Firefox shows double and triple-spaciong. How can I fix this? Printing from IE shows normal text
-
IPad External Sound not working.
My iPad (3rd generation) Wi-Fi only, my external sound doesn't work, what will I do? Whenever I put my earphones the sound works. I checked the warranty, the technical support was already expired and the repair and services is still active.
-
Dropbox Issues with Illustrator
When I try to open, view as original, or download a shared Illustrator file from Dropbox, I receive "an unknown error occurred" message.