Table maintenace setting No Transport option.

HI,
I have a table maintance for a custom table, Its attribute is set to
'Automatic Transport' no it ask for transport request for every change. I want to set it to 'No Transport' but it is not changing it.
It gives the message <b>'The flag for the transport link was corrected'</b>  and again set the old value.
What to do...
Thanks.

Go to SE11 -> Utilities -> Table Maintanance Generator
There will be a radio button for 'REcording Routine'. Select the "no, or user, recording routine" and SAVE.
Now it will not ask for transport request.
Regards,
Anish Thomas

Similar Messages

  • Transport Option is Disable in 1KEF

    Hi All,
    Here, FI  user  want to make transport request in 1KEF when he go 1KEF -->Table View --> Transport  Then
    he got disable the Transport Option.
    How can i enable Transport Option in 1KEF?
    while environment consist on ECC6 SR3 , DB 10.2 on Window Server 2003 .
    Regards,
    majamil

    Hi Majamil
    As u r a FICO person u faced the problem related to basis team,actually client which u r working is set to "NO CHANGES ALLOWED" That is why ur transport is disabled,Work through below mentioned process and get the work done and let me know the satatus of ur error.ok
    *1st Method* :  type t-code SCC4>Double click on the client no which u r working(Ex:300 i need, then click on 300 client no)->click on change option->select the option CHANGES WITH OUT AUTOMATIC RECORDING->below that select the option CHANGES TO REPOSITORY AND CROSS CLIENT CUSTOMIZING ALLOWED->save->BACK--->BACK.
                          By doing above mentioned process u can solve the problem, by 2nd method also we can solve the issue.
    *2nd Method* : First run the t-code which u want to execute then it strucks at certain point of time then execute /NSU53 t-code it displays what is required authorization to get  ur work done.
                    Still there is one more method to solve ur problem,i think what i said till now can solve ur issue,let me know the status after going through the above mentioned process,if doesn't satisfy then i can suggest u one more method,

  • How to hide fields in Table maintenace screen

    I have created a view with table maintenance generator. I would like to hide some fields. With event I am able to fill in those fields but I want to hide those from screen.

    HI, 
    This is reff with ur below post, I have been stuck with same problem,
    I got your code, how its functioning, but didn't get get where i have to write it.
    plz tell me in brief.
    Thanks in Advance.
    Regards
    Vivek
    Re: How to hide fields in Table maintenace screen  
    Posted: Feb 6, 2009 11:42 AM   in response to: Aarti Ramdasi in response to: Aarti Ramdasi           
    Click to report abuse...             Click to reply to this thread      Reply
    Hi,
    You can hide the fields like this..
    For example
    select-options:
    s_carrid for spfli-carrid modif id gr1,
    s_connid for spfli-connid modif id gr1,
    s_cityto for spfli-cityto modif id gr2.
    I am going to hide last fied..To do this
    at selction-screen output.
    if s_carrid is initial or s_connid is initial.
    loop at screen.
    if screen-group1 CS 'GR2'.
    screen-active = 0.
    modify screen.
    endif.
    endloop.
    endif.
    whenever u click on any one of the field i.e. carrid or connid the third field will displayed.Otherwies the last field cityto is not visible initially
    Regards
    Kiran

  • How to modify  a table without  setting system to modifiable

    Hi All
    Is there a way to modify a table without setting the system to modifiable either in SCC4 or SE06.
    We locked SCC4 in our system , however one tables are not able to modify.
    table name YAUTM
    Is there a way to bypass this?
    Edited by: Shou Woon Wee on Jan 11, 2008 3:09 AM

    Hi Shou......
    if it gives you a message....."the client is not modifiable"/ ALIAS "table not modifiable"  ...then from a security perspective....you cant, and you might not want to bypass it!
    SCC4 settings are meant to be for that!  Contact your Basis team for this.
    The only way to bypass this is thru ....sending changes through a transport request.
    Curiosity: what environment are you trying this out ? cant be sandbox or DEV!
    Regards
    Abhishek

  • Database copy with "set define off" option

    Is there an option to do a database copy with a "set define off" option ? I'm copying packages that contain ampersands (&) in strings and during the copy I'm being asked the value of these variables.

    Apologies for spamming this thread, but I'd like to point out a couple of additional issues regarding Database Copy:
    1) On Fedora it tries to create the script file in a system folder ( +/opt/sqldeveloper/sqldeveloper+, IIRC) which obviously doesn't work unless you are root.
    2) DDL generated for objects named like the exporting schema (for example table TEST in schema TEST) is incorrect. For example (note the missing table name):
    -- DDL for Table TEST
    CREATE TABLE
    (     "FIELD1" NUMBER,
    ) ;

  • How to Create BC SET using Transport Request

    Hi,
    How to Create BC SET using Transport Request.if any one knows help me

    Hi Gowri,
    The below given description might help u out ..
    You want to create a BC Set from a transport request. A transport request containing Customizing data must already exist.
    This Customizing request is a change request with which you can copy and transport the changed system settings.
    The BC Set is based on the data in the Customizing request. You can copy all the data records in the Customizing request into the BC Set, or select a subset.
    You can subsequently edit BC Sets created from transport requests.
    Procedure
    Enter the Customizing request number and Continue.
    -> You can search for requests with the F4 help. The request type is Workbench/Customizing requests. The request status is changeable or released.
    -> You get an overview of the transport objects in the transport request. To put a transport object in the BC Set, flag the row Copy.
    ->The Status column tells you the BC Set-compatibility of the transport object. It can have the following values:
    ·        green traffic light: The transport object can be put in the BC Set.
    ·        yellow traffic light: BC Set creation or activation problems are possible. Check whether all data records have been put in the BC Set, after you create it.
    ·        red traffic light: Table entries exist, but they cannot be interpreted. They cannot be put in the BC Set.
    ·        Cancel: The transport object cannot be interpreted or put in the BC Set.
    You can get detail information about the object at the bottom of the screen, by double-clicking on a row. For detailed information about messages, choose the icon in the Documentation column.
    The Activity column indicates the associated IMG activity. If no unique assignment is possible, the field is empty. To assign an activity or change an existing assignment, choose the Change Activity icon. Position the cursor on the IMG activity to which you want to assign the object, and choose Select.
    When you have made your choice, choose the Save Data from Transport Request icon.
    Make the necessary entries in the following dialog box Create Object Directory Entry. Choose Save.
    To create the BC Set with the selected rows, choose Save.  
    When you read the transport request, the data records are initially only read in the logon language. When you save the BC Set, all languages in the system are also put in the BC Set.
    You can edit the BC Set manually at any time. Proceed as described in Change BC Set.
    Reward if helpful.
    Thankyou,
    Regards.

  • Attaching a table entry to a transport request  by a program

    Hi,
    I need to create an entry in a database table through my program and at the same time I have to attach the same in a transport request. The Table is client independent.
    I am able to create a transport using BAPI_CTREQUEST_CREATE. But does not know how to add the table entry to it.
    Please help.
    Regards,
    Himanshu

    Hi Himanshu,
    there are two ways to put table entries in request.
    one is if you have table maintenace generator for that table then the table entries will automatically store in the request.
    second way using the tcode se16 execute the entries. select the entries by check box, from menu table entry -> transport entries.
    using this two ways you can transport the table entries.
    Regards,
    Ravibabu. A

  • I can't get download to work - it will not copy the mp3 file to my chosen location (as set in tools/options) - it gives me a new window with a player - no dwnlo

    I am running windows xp sp2 and I have set my dowload location under (tools/options), but when I select an MP3 file to download, firefox does NOT copy the file to my chosen location on my HD - instead, it opens up a new window with a makeshift "player" and begins loading the player with the MP3 file. The problem is that I have no idea where on my system firefox has copied this file to, so, I cannot leave and come back later and play this MP3 file using winamp. I have to listen to it right then or lose it - if I close that new window (with that puny little "player"), then I lose the download, wherever firefox put it on my PC (I got no idea where it is). This is all under firefox 25.0
    I am also running FIrefox 12.0 on an older windows 2000 machine and that works perfectly - I can download any MP3 file I want, and firefox 12.0 (on win2k, sp4) downloads it to my chosen location (on my HD), and it gives me the download window so I can watch its progress and have some control over pause, and resume, and, when it is done, the download window offers me the option to "open containing folder" so I can make sure it got to where I wanted it. In other words, Firefox 12.0 on WIn2k, sp4 works better than firefox 25.0 on winxp sp2!!!!! What gives? I went through and set up my options for XP just like I did with Win2k and it all looks good, but firefox 25.0 just ignores my chosen location and always defaults to give me that makeshift player and I am not able to actually copy the mp3 file to my harddrive - it makes firerox 25.0 almost unusable since downloading mp3 files is a big part of my firexfox use - please help - I am not able to upgrade windows at this time, and, since firefox 12.0 still works fine on win2k, I can't understand what happened at firefox?

    Phillipp,
    I tried it again using "save link as", and this time it actually worked! I just now downloaded several more using the "save link as" option, and it works perfectly. Thanks. Problem solved.
    Littleberry

  • User Table Key set up in User defined field management

    Dear  Expert,
    what is use of User Table Key set up in User defined field management in SAP B1.
    Thanks.
    Sridharan.R
    Edited by: Sridharan.R on Oct 4, 2011 8:26 AM

    Hi,
    Once a UDF is created and a value is entered in it, the same cannot be retrieved in any of the layouts and reports unless a Key is generated for that UDF. By assigning a Key to that UDF, the same UDF can be used in Crystal Reports or any other Reporting tool to extract its values from SAP. These reporting tools searches the Uniqueness of the UDF Values with this Keys only.
    For eg.: When you develop a report and select a table from which you need the fields to be shown in the layout. In that, the only fields whose keys are generated are only available to use in the report.
    Hope its clear to you.
    Regards,
    Papil

  • I have been taking screenshots on my mac book pro and they have been saving to my desktop. However when i try to move them into a folder, they don't move at all! I have changed my setting in view options to 'none' but they still don't move?

    I have been taking screenshots on my mac book pro and they have been saving to my desktop. However when i try to move them into a folder, they don't move at all! I have changed my setting in view options to 'none' but they still don't move?

    Got to your Desktop folder in the Finder sidebar, command i will open the info pane.
    What are your permissions here? Unlock the pad lock and Change to read write.
    Are you experiencing other problems?
    Reset Home Directory Permissions and ACLs
    http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/

  • This message could not be delivered because your SMTP settings are not set. Please use the Accounts Preferences panel to set the SMTP options for your account.

    I am not able to send out an email. I keep getting the following message: This message could not be delivered because your SMTP settings are not set. Please use the Accounts Preferences panel to set the SMTP options for your account. Can someone help me with this?

    We need some information, starting with the email provider (eg. Google, Yahoo, Bellsouth, etc)

  • Problem with Table Value Set

    Hi,
    i have created a Table value Set for showing Vendor_site_code in DFF
    XXXX_VENDOR_NAME
    Table Application :Purchasing
    Table Name:PO_VENDORS
    Value:VENDOR_NAME
    ID:VENDOR_ID
    XXXX_VENDOR_SITECODE
    Table Application :Purchasing
    Table Name:PO_VENDORS PV, PO_VENDOR_SITES_ALL PVS
    Value:PVS.VENDOR_SITE_CODE
    ID:PVS.VENDOR_SITE_ID
    where/order by: where PV.VENDOR_ID=PVS.VENDOR_ID
    XXX_ITEM
    Table Application :IVENTORY
    Table Name:MTL_SYSTEM_ITEMS_B
    Value:PVSSEGMENT1||'-'||SEGMENT2||SEGMENT3
    ID:PVS.INVENTORY_ITEM_ID
    where/order by:WHERE ORGANIZATION_ID = cs_std.get_item_valdn_orgzn_id
    i am facing the below error when opening the Form related to that DFF
    APP-FND-01564: ORACLE error 1722 in FDFGVD
    Cause: FDFGVD failed due to ORA-01722: invalid number.
    The SQL statement being executed at the time of the error was: SELECT PVS.VENDOR_SITE_ID,PVS.VENDOR_SITE_CODE VALUE, PVS.VENDOR_SITE_CODE DESCRIPTION, NVL('N', 'N'), NVL(TO_NUMBER(NULL), -1), NULL, NVL('Y', 'Y'), NVL(TO_CHAR(TO_DATE(NULL), 'J'), 0), NVL(TO_CHAR(TO_DATE(NULL), 'J'), 0) FROM PO_VENDORS PV, PO_VENDOR_SITES_ALL PVS WHERE ( PV.VENDOR_ID=PVS.VENDOR_ID) AND PVS.VENDOR_SITE_ID = :X and was executed from the file &ERRFILE.

    Can you say where have you placed this valueset - which DFF, in which form?

  • How to setting the printing option in javafx 2.1 or later?

    Hi,
    We need to printing pdf document in our project, it's can use the open source to do it now, but it's has some problem when running the program in other pc.
    Step 1, It's setting the program with full screen in our program.
    Step 2, In the button event, we call JDK swing print dialog to setting the page option.
    They will not bring the swing frame to front, and the Javafx program unable to response cause by the swing printdialog.
    If anybody know how to deal with the paper option setting by Javafx, Please help me, thanks a lot.

    Vibhor - You are developing using the Oracle Application Express facility running on Oracle Database 10g Express Edition. You can export applications you develop there for use on Oracle Application Express versions 2.0 and higher which can be used with Oracle Database server versions 9.2.0.3 and higher.
    Electing to install an application as Run Application Only will prevent the editing of the application definition by the end user. This can be useful if you assume that the end user will have access to the Application Builder in his database, which is likely if the end user's database is Oracle Database 10g Express Edition (XE). However, there is no way to prevent an XE user from having complete control over applications installed into those databases. If the end user's database is not XE, then only an Oracle Application Express site administrator will be able to change the application's Run Application Only setting to Run and Build Application but all developers with developer accounts in the Application Builder will be able to view and edit the application definition.
    Further, when you say "he can easily access my code", remember that the application definition is contained completely within the export file that you distribute but you may have in mind your PL/SQL source code as well. PL/SQL can be wrapped using a utility to make it more difficult to see in clear text.
    Scott

  • ABAP Trial Version SP12:Error while setting up transport environment

    Hi Folks,
    I have successfully installed ABAP trial SP12 on my notebook(XP) and have been able to create some objects.
    Thanks to very effective blogs by Manfred Lutz .
    Now, I'm trying to set up the transport environment as per the blog but face the following error when I execute the step 'Distribute and Activate TMS Configuration'
    Appreciate any help in solving the issue. I'm detailing below the error and the checks I had done.
    ******ERROR*************************************************************
    ERROR:
    Could not start transport control program tp
    LONG TEXT:
    Message no. TP608 Diagnosis
    There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
      Error code: 4
      RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
    I did the following based on the long text and after searching the forum:
    *(1)*
    Run program RSTPTEST to localize error.
    The program gave the following result for the RFC destination 'CALLTP_WindowsNT':
    ********RESULT OF RSTPTEST***********************************************
    "timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'#Timeout during connection setup (check that partner exists)"
    *(2)*
    Run the connection test in SM59 for destination 'CALLTP_WindowsNT':
    The results were inconsistent. The connection test failed often but it was ok a few times.
    The details of the connection failure are as follows:
    *******CONNECTION FAILURE RESULTS******************************************************
              Cancel
    timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' Timeout during connection setu
    ERROR: timeout during allocate
    LOCATION: SAP-Gateway on host JayNB / sapgw00
    DETAIL: no connect of TP D:\SAP\NSP\SYS\exe\run\tp.EXE from host JayNB after 2
    COMPONENT: SAP-Gateway
    COUNTER: 22
    MODULE: gwr3cpic.c
    LINE: 5873
    RETURN CODE: 242
    SUBRC: 0
    RELEASE: 700
    TIME: Sun Mar 23 11:07:53 2008
    VERSION: 2
    *(3) I then went to STMS and regenerated the RFC destinations and then ran the connection test. The result was OK.
    Now, I again execute the 'Distribute and Activate TMS Configuration'  step . It still gives the same error.
    When I run the connection test in SM59, it results in error.
    Further checks:***********************
    (a) The permissions for folder SAP in the local directory were done as instructed in the blog.
    (b) the directory path  /SAP/trans/bin had the following files:
    *TP_DOMAIN_NSP.PFL*  : the last modified date changes every time I execute 'Distribute and Activate TMS Configuration'.
    *DOMAIN*  :The last modified date is in the past. It does not change.
    Please inform how do I set up transport.
    Jay
    Code Formatted by: Alvaro Tejada Galindo on Apr 1, 2008 4:43 PM

    Hi Krishna ,
    Thank you for the suggestion.
    I did as you suggested by inserting the mapping of ip and host in the hosts file.
    and restarted the server,but I still get the same error "could not start transport control program tp".
    Any other step that I'm missing.
    Thanks again
    Jay

  • How to use FlashVars to set the default option on a combobox

    We are using XCelcius to display data in an XML file that is populated by another program using the Web Services approach.
    On our widget, there is a combobox that allows the user to select a specific range of data.  In Xcelcius, the value of this combobox can be defaulted using the Behavior->Default Options->Combo.
    This is good, but this also means hardcoding a particular value.  What we'd like to do is set the Default Option on the combobox via a FlashVar.
    Is this level of behavior exposed via the FlashVars so we can define the default option in our HTML file?
    Thanks for reading.

    unfortunately you cannot dynamically set the default option in 'Any' selector - so your Flash Vars approach will not work

Maybe you are looking for