How to setting the printing option in javafx 2.1 or later?

Hi,
We need to printing pdf document in our project, it's can use the open source to do it now, but it's has some problem when running the program in other pc.
Step 1, It's setting the program with full screen in our program.
Step 2, In the button event, we call JDK swing print dialog to setting the page option.
They will not bring the swing frame to front, and the Javafx program unable to response cause by the swing printdialog.
If anybody know how to deal with the paper option setting by Javafx, Please help me, thanks a lot.

Vibhor - You are developing using the Oracle Application Express facility running on Oracle Database 10g Express Edition. You can export applications you develop there for use on Oracle Application Express versions 2.0 and higher which can be used with Oracle Database server versions 9.2.0.3 and higher.
Electing to install an application as Run Application Only will prevent the editing of the application definition by the end user. This can be useful if you assume that the end user will have access to the Application Builder in his database, which is likely if the end user's database is Oracle Database 10g Express Edition (XE). However, there is no way to prevent an XE user from having complete control over applications installed into those databases. If the end user's database is not XE, then only an Oracle Application Express site administrator will be able to change the application's Run Application Only setting to Run and Build Application but all developers with developer accounts in the Application Builder will be able to view and edit the application definition.
Further, when you say "he can easily access my code", remember that the application definition is contained completely within the export file that you distribute but you may have in mind your PL/SQL source code as well. PL/SQL can be wrapped using a utility to make it more difficult to see in clear text.
Scott

Similar Messages

How to print the PDF file contains stamps without set the printer options

I have pdf document, and stamp them with my personal stamp.
With the printer option under "Comments and Forms", I set to "Document", my stamp DISAPPEARED.
Unless re-set (use options) to "Document and Markups" or "Document and Stamps" then it will be fined.
Can I embeding my stamps to my document so that everyone can print without using printer options to contain stamps?
(regarding to whoever don't know how to set the printer options, and keep asking that I did not stamp on the doc.)
Please help.
Thanks in advance.
th

Can I embeding my stamps to my document so that everyone can print without using printer options to contain stamps?
Yes, you can.

How to use the print option for photos?

How to use the print option for photos. I have a wireless printer but how do I set it up?

http://www.apple.com/support/iphone/assistant/airprint/

How to enable the printer option in print priview screen in script

Hi All,
Please tell me how to enable the printer option in script print priview screen.
Thanks & Regards
Murali

hi
the print option TDNOPRINT has to be intial (' '). NOT 'X'
TDNOPRINT CHAR 1 0 No printing from print preview
this will do.
Gr., Frank

How to default the print options to the excel output

Hi,
We have a requirement to default the print options in the output of the report and the output is of excel type.
Basically I need excel out put, which should be printed on Letter size paper and orientation should be landscape.
For this I created a RTF template keeping orientation as landscape. I've loaded the xml data and see the output in excel. But the problem come when view print preview. By default it shows the preview in portrait orientation and scaling set to 'Adjust to 100% normal size'. Because of this my report is not getting printed in a single page. Manually If I change the orientation to landscape and scaling to 'Fit to 1 page(s) wide by 1 tall', the report prints properly. so how to default these properties while generating the output itself?
Thanks,
Vijay

I got a work around for this. Instead of using RTF template, I used Microsoft Excel itself as template and did the formatting in excel.
thanks,
Vijay

Report 3.0 : How to set the printer margin??

Hi all,
In report previewer, I am able to set the printer page margin
mannally.
Then, If, I've get some reports by RUN_PRODUCT in batch mode,
how can I set the page margin??
Regards,
Andrew
null

Hi amole,
one more doubt,
Iam new to use BAPI_ENTRYSHEET_CREATE.
What are the mandatory fields that should be passed to it to create SES ( Service Entry Sheet ).
The data given to me is:
Purchase Ord number,
Activity Number,
Rate,
Quantity,
External Number.
Is the above data is enough to create SES.
please clarify.

How to disable the print option in A. Reader (using JavaScript)

I need be able to disable the print option from JavaScript code. I know that the print option can be disabled in the
"File > Form preferences > PDF Security" option in the main menu but i need to do this from a script into the document (
preferably using the JavaScript language).
Thanks in advance!
Dan

HI!
I have the same problem =)
I have fixed this issue using the "app.fs.isFullScreen = true;" statement.
Doing this you don't see toolbar anymore.
You can use "hideToolbarButton" instruction and, maybe, you can obtain a more interesting result.
Below there is a very interesting document:
http://partners.adobe.com/public/developer/en/acrobat/sdk/5186AcroJS.pdf
I'm sorry for my poor english :-)
Bye,
Roberto (from Italy)
Ps= Do you know how I can obtain a list of required fields in a form?
thank's!

How to disable the print option in A. Reader (in JavaScript)

I need be able to disable the print option from JavaScript code. I know that the print option can be disabled in the
"File > Form preferences > PDF Security" option in the main menu but i need to do this from a script into the document (
preferably in JavaScript language).
Thanks in advance!
Dan

HI!
I have the same problem =)
I have fixed this issue using the "app.fs.isFullScreen = true;" statement.
Doing this you don't see toolbar anymore.
You can use "hideToolbarButton" instruction and, maybe, you can obtain a more interesting result.
Below there is a very interesting document:
http://partners.adobe.com/public/developer/en/acrobat/sdk/5186AcroJS.pdf
I'm sorry for my poor english :-)
Bye,
Roberto (from Italy)
Ps= Do you know how I can obtain a list of required fields in a form?
thank's!

How to set the printer setting in VBscript

i have a folder which is containing 20 pdf files ,i want to print only 2nd page with 2 copies in all 20 PDF files.
i have VBscript
TargetFolder = "file path"
Set objShell = CreateObject("Shell.Application")
Set objFolder = objShell.Namespace(TargetFolder)
Set colItems = objFolder.Items
For Each objItem in colItems
objItem.InvokeVerbEx("Print")
Next
here all files are printing all page but how to set 2nd page with 2 copies in 20 pdf files

You don't mention what SDK you're using.
If you're running a Nokia SDK, for instance, you need to explicitly set the proxy URI somewhere else. Try running your MIDlet with Default Color Phone and see if it works.
Unfortunately, proxies do not use exactly the same HTTP request method as normal Web clients (i.e., browsers). Most caches are smart enough to try to be transparent, however. It might be worthwhile to ensure that your proxy is set up as a transparent one.
Worst case scenario, you can always host the files on a server inside your LAN, so it doesn't have to breach the proxy (or, indeed, on a little Web server running on the same machine as the emulator).
Jouster

How to Set up Print As Image Registry Default.

This is a response to the archived post at:
martin hrubes, "How to customize printing by registry - print as image" #, 6 Nov 2007 2:28 am
I was trying to find out how to set the "Print As Image" advanced setting to be enabled by default. Here is what I discovered through trial and error.
1. The setting is stored per user and per printer. (i.e. it has to be set for each printer for each user.)
2. The registry setting is stored in the following key:
[HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\8.0\General\cPrintAsImage]
3. In this key, each printer has a separate binary value named s0, s1, s2, etc. The number increments by 1 for each printer added. If you open the value data, you will see it contains the name of the printer encoded in hex. (ex. hex coded for \\Server\Printer1)
My recomendation is to open a pdf file in reader, go to File -> Print ->Select Desired Printer -> Click "Advanced" Options -> Enable "Print As Image" -> Click OK - Click OK again. Repeat for each printer you want to
change.
**NOTE** If you don't click OK both times (i.e. cancel the print dialog), the change will not be saved. You have to actually print something to the printer. If you don't want to print something, make sure the printer is offline or not accessible (unplug the network, usb, parallel, serial cable) first. Once the printer has been changed, it will keep the setting until to you change it.
After you have set-up all of the desired printers, open RegEdit and navigate to the above key. Right click on it, and export it. Note the file name and location you are saving to. Close RegEdit. "Edit" (Right Click) the file just exported ("Opening" the file will just import it back into the registry.). Once opened, highlight and copy the registry key and all of the registry values. Paste the key and values at the end of the file. In one of the keys change "HKEY_CURRENT_USER\" to "HKEY_USERS\.DEFAULT\". Save and exit the file.
When imported this file will enable the "Print As Image" setting for the currently logged in user plus add the setting to the default users profile so any new users to the machine will have it enabled by default also. However, it will not add it to any other user profiles that already exist on the computer. To do this, either use a login script for domain computers or add the reg file to the "All Users Startup" folder.
It would be nice to have a setting in the deployment custimazation wizard to handle this, but for now we're stuck with enabling it the hard way.

Yes Spyla, please see this link http://www.404techsupport.com/2008/09/09/make-adobe-reader-and-adobe-acrobat-use-print-as- image-setting-by-default-2/comment-page-1/#comment-3112.
Allan, many thanks for your post, it certainly helped point me in the right direction. what I found though is that you do not need to tick the print as image box at any point during the setting up of this. All you need to do is add the registry key for whichever version of Adobe you are using for this to work. So basically. what you are saying for each instance of Adobe is regardless of whether or not the print as image is selected, the registry key is saying always print as image for the printer as specified by the hex code. I have found that for network printers, you have to include the full path i.e. \\<servername>\<printername> e.g \\testserver\printer1 and convert all of that to hex. With later versions (9 up over), they have allowed for the string name of the printer so that it is just plain text which also makes life easier.
What I do is apply this registry entry via Group Policy on a per room basis so that we only ever need to add one printer to the list. you could do this globally by adding all printers sequentially using s0, s1, s2 or t0, t1, t2 etc depending on which version you are using. The screenshot shows the registry key for 1 printer for Adobe Reader 8.
The value data is the binary code for the actual full printer name
This works a treat.
Hope this helps
Thanks

Setting The Printer For Reverse Or Mirror Image

Hello,
IM trying to create some T-Shirt Transfers, but I Would Like To Know How To Set The Printer For Reverse Or Mirror Image?
Thanks!

click print, go to 'preferences', under the 'finishing' tab, orientation section your choices should be [ ]portrait, [ ]landscape, [ ]MIRROR IMAGE.

How can I set default printer options on an iMac for an HP pro 8500 printer to print in draft mode?

How can I set default printer options on an iMac for an HP pro 8500 printer to print in draft mode?

When you use the Canon driver, the 2 sided printing is set in a different location. There is an entire menu dedicated to it (at least on my mx892). The printer dialog box has a menu selector in the middle of the screen (I think it says "layout" by default). If you click on it, you will see the duplexing options at the bottom. Much more flexibility than the single checkbox available with "airprint". The interface is unusual (at least for me) but you can pre-set up many different configurations (Fast Duplex, Fine Single-sided, B&W, Photo, etc etc.)

The HP C4480 all in one series PRINTER that I got free with my i-Mac is printing TINY print despite that my computer is set at 13 font Helvetica. How to reset the printer to normal print?

The HP C4480 all in one series PRINTER that I got free with my i-Mac is printing TINY print despite that my computer is set at 13 font Helvetica. How to reset the printer to normal print?

Is the Paper Size: set to US Letter and Scale: set to 100%
Dennis

How do I set the print and paper size in iPhoto 5

Can somebody please help. How do you set up iPhoto 5 so that you define both the the size of the print and the photo paper you use?
For example, I wish to print a 4.5cm x 3.5 cm photo on 6x4 (or 15cm x 10cm to keep all the units the same) paper.
I've seen a post saying how to do it in iPhoto 8, but the drop-downs are different.

I do not remember the locations in iPhoto 5 but there are probably three places to mess with
1 - set the paper size
2 - set the print size
3 - set the paper tray for the printer to use that has the paper size that you set in step 1
these may be in the print sequence or under the file menu as page set up (or similar). If these are not obvious try the Help menu
LN

#*$!%! Can't figure out how REALLY to set the printing defaults so they STICK for everything

PLEASE DON'T REPLY HERE. PLEASE REPLY TO MY IDENTICAL POST AT
http://h30434.www3.hp.com/psg/board/message?board.id=Software&thread.id=5348
On our 6-month old HP OfficeJet Pro 8500 Wireless A909g, we can't seem to figure out how to set the DEFAULT printing parameters so they really apply to all docs (unless we designate otherwise for a particular doc, of course). When we set them, sometimes they work for the next doc, and sometimes they revert back to an earlier setting.
There seem to be three ways to set parameters for the printer: Properties, Printing Preferences or Printing Defaults on the Advanced tab. (We really thought Printing Defaults on the Advanced tab would do it, since it's so hard to find, but ... NOT.)
My partner thinks it's an HP conspiracy to sell more ink because the reversion is to General with Color (the most ink-intensive, as far as I can figure out). We are trying to fix the machine to start always with Fast-Economical/Black Ink Only. Sometimes it's there and sometimes we have to re-jigger first. We still have to check every time.
Also, I want to fix every job to "Print Back to Front" because the printer shoots out the pages face up. Again, sometimes it's there, and sometimes we have to re-set before the job.
Also, whether we get the default we had set or we re-jigger first, the settings don't stick for every worksheet in an Excel workbook. Or sometimes not even every page.
So, who out there has the 100% foolproof guide to NAILING DOWN THOSE SETTINGS FOR EVERYTHING?
PLEASE DON'T REPLY HERE. PLEASE REPLY TO MY IDENTICAL POST AT
http://h30434.www3.hp.com/psg/board/message?board.id=Software&thread.id=5348

Locking this accidental double post and directing people to the linked original thread.
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation

How to setting the printing option in javafx 2.1 or later?

Similar Messages

Maybe you are looking for