Table Maintenance Generator Error

Friends,
I am encountering errors in Table Maintenance Generator for a ztable.
I am getting the error message "Memory for screen LOAD is used up.bytes) is not"
Message no.XI166
Please let me know what is missing.
Thanks and Regards.

Hi,
Try to create the table maintainence generator again. This is the maximum time approach to deal with table maintainence generator .
Regards.

Similar Messages

Error while creating table maintenance generator

Hi,
I am getting below error while creating table maintenance generator.
Screen SAPLZtest 0002 could not be generated. In DYNPFIELD_ATTR field LENGTH has the invalid value 241.
Reason for that error might be:
In the table I have a field with a dataelement(customized) of type Char and length 241.
But in the other table Iam using the standard data element(standard) of same type(241 char).In this table Iam able to create table maintenance generator without any errors.
And the domain Iam using is same for both the tables.
Please help me to solve this.
Thanks in advance,
Sravanthi

Hi,
you can go to transaction se51 and go your screen. active it.. you can find thesolution.
refer these links..
Error in table control
Error while creating table maintainence generator !
Thanks and Regards,
Ahamed.

Error in flow logic of table maintenance generator

Hi,
While activating the flow logic of table maintenance generator I am getting this error 'Table control TCTRL_ZUPP2P_PIBAYCNT must have atleast 2 loop lines.' and in layout I am able to see only 2 rows.Can anyone tell me why am I getting this error.

hi,
Take the function group and goto SE80 and activate the function group to avoid the error...
Regards,
Santosh

Table Maintenance Generator giving Error in PRD.

Hello Experts,
I am receiving below error in PRD for a Table Maintenance generator for Z-Table. PFA Screen Shot.
My Query is that though the information icon narrates to goto T-code SE54 & Re-generate TMG for the specified Function group. Which Option should 1 select after i had selection the option for Edit Function group->Re-generate group specific program.
The info icon in the first pic says to do the following.
Choose 'Edit Function Group' in the transaction SE54, enter the function group name 'ZOTMTRDPROFITSEG' and choose 'Regenerate Group-Specific Programs'. Choose 'Refresh Structure-Spec. Data Declarations' in the next selection window.
Would like to add a point that this Function grp also contains TMG for other tables as well, will it impact other TMG's.
Best Regards
Priyesh Shah

regenerate the TM object via SE11 - Table maintenance.
normally should do the trick.
However, keep the func groups & tables 1:1 saves a lot of this kind of problem.
Don't mix them up i.e. more than 1 tab maint for a func group - never ending hassle you will get!!!
go into Expert mode and regen it again. Remove the maint from this func group and create new func group for the table.

Error: Enhancing Table Maintenance Generator

Hello,
I am trying to enhance a Table Maintenance Generator as per client's requirement; while saving a new entry; I got to do some validations; I have got the spot to include my code; but how should I include it; using Enhancement Spots or something? To try out, I have made an enhancement spot and trying to make an enhancement in the program; it throws out an error: "Object FUGR SVIM is part of the central basis and therefore cannot be enhanced".
Please guide me how to proceed? Is this approach correct to enhance a Table Maintenance Generator?

hello zahak ,
u have 2 options to places validations in TMG .
1. By using the events
2. Doing changes in PAI of that screen and placing validations.
regards
Prabhu

Blank Records added while using Table maintenance generator - SM30

Hi all,
I have created a ztable and view,
For the view table maintenance generator created using sm30,
First time when i add reords, a blank record is added automatically ,how to prevent it,
Also when i try to add invalid data, system throws error , field becomes display only.
How to solve.
Regards
Senthil

Hi Tarun,
Go to the layout and increase the size of the Screen. or at the screen attributes change the length and width values.
You know that initially the screen occupies default size only.
Hope this would serve your purpose.
Cheerz
Ram

Add field in table maintenance generator screen of maintenance view

Hi,
I am having a table with field user-id. I want to generate a maintenance view which will have corresponding user name as input disabled field. Since there are two tables USR21 and ADRP I need to access(not a direct check table) I will have to modify the code generated by the table maintenance generator.
Problem is that it is having one internal table EXTRACT at table control loop. That internal table cannot be accessed if you write a module inside the table control loop and try to catch. The error coming as EXTRACT is not object of structure and therefore no component. I tried to capture the value of the Loop but could not be successful. Any suggestion please.
Thanks,
Atanu

Hi,
sample:
      MODULE LISTE_UPDATE_LISTE.
    ENDCHAIN.
*--->begin of your change
    CHAIN.
      FIELD YTAB1-BILKS .
      FIELD YTAB1-BILKH .
       module check_bewar ON CHAIN-input. "your checks
    ENDCHAIN.
*-----> end of your change
ENDLOOP.
MODULE LISTE_AFTER_LOOP.
-> module check_bewar is in an includ z123_INCL
Regards Andreas

EVENT problem in Table maintenance generator

Hello all
             I m working on 4.6C sytem. I m facing 2 problems in events in table maintenance generator
(1) I am using 04 event (After deleting records from table)   I have written BREAK-POINT in the Form .....ENDFORM... But the control doesnt stop there , when i select an existing record and press delete record button? not able to understand this
(2) When i implement even t 03( Before deleting records from table) , and select an existing record and press delete record button . Control successfully Go to corresponding FORM ...   BREAK-POINT ENDFORM .
But now the problem is.. in debuggin i can see the contents in TOTAL table but when i try to code LOOP at TOTAL ..ENDLOOP...it gives me syntax error saying " table TOTAL doesnot exists or not defined..but similar field TOTAL_S , TOTAL_M , TOTAL_L exists.. ???
how come i can see the same during debugging but cannot code it ?
Plese help
Nilesh

Hi Nilesh,
(1) I think the control will stop there after you delete AND save. Not sure about that but give it a try.
(2) I believe you are trying to access fields inside table TOTAL, is that right?
Actually you have to declare a work area with your Z table type.
DATA: w_workarea type ztable.
LOOP at total.
w_workarea = total.
endoop.
Then you can work with w_workarea.
Best regards.

Event for input validation in custom table (table maintenance generator)

Hello all,
I look for a solution to execute an event after the modification of a table field of a custom table to validate the user's input.
I already tried event 07 (Execution : Before correcting the contents of a selected field) of the table maintenance generator but it will be executed after some modification made by the Edit -> Change field action.
I could use the event 01 but in my opinion this event happens to late and errors are very uncomfortable for the user at that time.
Editing the dynpro events is not a solution for me because it should be easy to maintain the table structure at any time.
Thank you in advance
Robert

Thank you!
Event 08 just starts after the saving process after Event 07.
Event 18 gets executed when I click on the save button.
I want to check the data after the enter button was pressed as you can see it in several transactions.

Validating non key fields in table maintenance generator

Hi,
I ma using events for table maintenance generator event 05 ,there i want to validate non key fields ......i am throwing error message ....all the non key fields are getting in display mode ...i need them to enable to enter values ....
please suggest
Thanks,
Shailaja Ainala.

Hi Shailaja,
Its property of error message, which makes it as non-editable.
You can display either status or info message after validation check.
And finally before saving (before save event) display error message, so that it invalid entries doesnt get saved.
Thanks,
Nisha Vengal.

Table maintenance generator events

Hi,
I have created a table maintenance generator and want to populate sy-uname and sy-datum into two fields during SAVE. So I went to Environment -> Modification -> Events and selected "01" event i.e. "Before saving the data in the database" and entered Form routine as "F_UPDATE_UNAME_UDATE". Then if I go to SM30 transaction it goes to dump.
Could you please tell whether I am missing any point?
Regards,
Balaji Viswanath.

Hi,
Pasted it below.
Runtime Error          PERFORM_NOT_FOUND
Except.                CX_SY_DYN_CALL_ILLEGAL_FORM
Date and Time          01/31/2008 09:26:52
ShrtText
     Call (PERFORM) to a non-existent routine.
What happened?
     The current program attempted to call an externally defined routine
     that does not exist.
     Error in ABAP application program.
     The current ABAP program "SAPLZTEST321" had to be terminated because one of the
     statements could not be executed.
     This is probably due to an error in the ABAP program.
     The current ABAP program had to be terminated because the
     ABAP processor detected an internal system error.
     The current ABAP program "SAPLZTEST321" had to be terminated because the ABAP
     processor discovered an invalid system state.
What can you do?
     Print out the error message (using the "Print" function)
     and make a note of the actions and input that caused the
     error.
     To resolve the problem, contact your SAP system administrator.
     You can use transaction ST22 (ABAP Dump Analysis) to view and administer
      termination messages, especially those beyond their normal deletion
     date.
    is especially useful if you want to keep a particular message.
Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_FORM',
     was neither
    caught nor passed along using a RAISING clause, in the procedure
     "PREPARE_SAVING" "(FORM)"
    Since the caller of the procedure could not have expected this exception
     to occur, the running program was terminated.
    The reason for the exception is:
    The program "SAPLZTEST321" is meant to execute an external PERFORM,
    namely the routine "F_UPDATE_UNAME_UDATE " of the program "SAPLZTEST321 ", but
    this routine does not exist.
    This may be due to any of the following reasons:
    1. One of the programs "SAPLZTEST321" or "SAPLZTEST321 " is currently being
     developed.
    The name "F_UPDATE_UNAME_UDATE " of the called routine may be incorrect, or
    the routine "F_UPDATE_UNAME_UDATE " is not yet implemented in the program
     "SAPLZTEST321 ".
    2. If the program SAPMSSY1 is involved in the runtime error, one of
    the function modules called via RFC is not flagged as remote-capable.
    (see Transaction SE37 Goto->Administration->RFC flag)
    3. There is an inconsistency in the system. The versions of the
    programs "SAPLZTEST321" and "SAPLZTEST321 " do not match.
How to correct the error
    - Check that transports to the system are complete.
    - Conclude any developments already begun ("SAPLZTEST321" and/or "SAPLZTEST321
    - Check routine names
    You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
    "PERFORM_NOT_FOUND" CX_SY_DYN_CALL_ILLEGAL_FORMC
    "SAPLZTEST321" or "LSVIMF14"
    "PREPARE_SAVING"
    If you cannot solve the problem yourself and you wish to send
    an error message to SAP, include the following documents:
    1. A printout of the problem description (short dump)
       To obtain this, select in the current display "System->List->
       Save->Local File (unconverted)".
    2. A suitable printout of the system log
       To obtain this, call the system log through transaction SM21.
       Limit the time interval to 10 minutes before and 5 minutes
       after the short dump. In the display, then select the function
       "System->List->Save->Local File (unconverted)".

New field not reflecting in Table maintenance generator

Hi Experts,
I have added a new field in a ztable.I regenerated the table maintenance generator,so that the new field is reflecting in devlopment system , also a TR got created.When i moved this TR to pre-production system new fields are reflecting in the structure of table but not in table maintenance generator.
Please suggest solutions.
Regards,
Niranjan

Hi Experts ,
I have gone through the steps which is mentioned.But still issue is pending,the changes in TR are not reflecting in pre prod.
Error after moving the TR with "Definition of a Maintenance and Transport Object".
The current ABAP program "SAPLSVIM" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLZFGL " in include "LZFGL$03
" in
line 13:
"Field "ZCHAR_FIXED_WIDTH" is unknown. It is neither in one of the spec"
"ified tables nor defined by a "DATA" statement. ."

Need help !- Table maintenance generator

Dear Experts,
I have created a custom table and all created a table maintenance generator for that. How do I make sure I am able to maintain the table using SM30 in the other clients of the system?
I created the table in client 125 and now need to insert records in110 for testing. But when I click on maintain button in SM30, I get a pop up which says "Client 110 has status 'not modifiable'"
Weird thing is all the other custom tables can be modifed and I also tried comparing the properties of my table with those and they are all exactly the same. Kindly help!!
Regards
Veena

Hi Veena,
While generating the table maintenance generator, Please check what radio button you choose for recording routine. I think you have selected 'Standard recording routine'. Change it to 'no, or user, recording routine' . Then this error will go away.
Hope this helps
Thanks
Romit

EVENTS in table maintenance Generator

Hi, can u people help me while using EVENTS in Table Maintenance Generator. Means how can I perform different task using events.

Hi,
Using events in table maintenace generator, you can validate the fields, update the fields etc..There are events(01-New Entry), (02-Before Save); (03-After Save) etc... The respective events trigger on the action performed.
To create events : Goto table maintenace generator screen->Enviorement->Modifications->Events.
Select the from the list of events and peform based on ur requirement
Regards
Shiva

Events in table maintenance generator 01

Hi all,
       I have an urgent requirement regarding the events in table maintenance generator.The requirement is i have a qty field in table i want to change the existing value it should allow only a lesser value.How to use TOTAL and EXTRACT structures.
it is urgent.please help me out.
Thanks & regards,
Kranthi

Follow the example below:
form get_vendor_name.
data w_extract type z_table.
data begin of w_total.
          include structure z_table.
data: action,
        mark,
end of w_total.
loop at extract into w_extract.
    check not w_extract-z_vend_no is initial.
    select single name1 from lfa1
                       into w_extract-z_vend_name
                       where lifnr = w_extract-z_vend_no.
    modify extract from w_extract.
endloop.
loop at total into w_total.
    check not w_total-z_vend_no is initial.
    select single name1 from lfa1
                       into w_total-z_vend_name
                       where lifnr eq w_total-z_vend_no.
    modify total from w_total.
endloop.
endform.
Reward points if useful.
Regards.

Table Maintenance Generator Error

Similar Messages

Maybe you are looking for