Table maintenance with insert records in SM30

Hi Sapall.
here i have just got a tricky situation.
there is a Z table which already been created by some body and when i insert a new record into it and then if i click on save, it was asking me the new transport requests but now the user dont want the table to ask forthe new tranport request.
can any body help me in this.
Regards.
Varma.

Hello Vinod,
For Customizing table we need the TR for entry maintenance.
Try creating a customizing table, create the TMG & check if it is asking for TR when saving entries ? It WONT !!!
In the TMG for the table you will find a block called "Recording Routine", select "Standard Recording Routine". This will ensure that a TR is asked everytime you save a record.
FYI, based on the delivery class (C or A) either a Customising Request or a Workbench Request will be asked when saving entries.
@OP: In the TMG of the table, check the "No, or User Recording Routine" button. It wont ask for TR anymore.
BR,
Suhas

Similar Messages

Help req for check customer table maintenance with XD02 if not throw error

hello ABAP GURUS,
check customer of the table maintenance with XD02 if not throw error i have given the codition for passing the values in the table but before that it has to check whether the customer i am passing in to the table is a customer from xd02.Here whatever no i am passing it is accepting it should not happen, but when i give the customer which is not a customer it should not accept but it has to throw the message as 'customer does not exist.Its urgent please help me
TYPES: BEGIN OF TY_KNVI,
KUNNR TYPE KUNNR,
TATYP TYPE TATYP,
TAXKD TYPE TAKLD,
END OF TY_KNVI.
DATA : VALIDFROM TYPE GUEBG,
VALIDTO TYPE GUEEN.
DATA : IT_KNVI TYPE STANDARD TABLE OF TY_KNVI,
WA_KNVI TYPE TY_KNVI OCCURS 0 WITH HEADER LINE.
DATA : V_NAME TYPE SYUNAME.
SELECT KUNNR
TATYP
TAXKD
FROM KNVI
INTO TABLE WA_KNVI
WHERE KUNNR = YYV_CFORM-KUNNR
AND TATYP = 'ZCST'
AND TAXKD = '1'.
V_NAME = SY-UNAME.
YYV_CFORM-ENTEREDBY = V_NAME.
IF SY-SUBRC NE 0.
MESSAGE E000(E4) WITH 'Please change the tax classification of ZCST as' '1' ', in Sales Area Data'.
ENDIF.
I have used the following code to enter the data into the table maintenance it is working fine and throwing the error when the tax type is not the one which i have given in the select statements but the problem is when i have given the customer no which is not there in the XD02 tcode, it is accepting and showing the error message as MESSAGE E000(E4) WITH 'Please change the tax classification of ZCST as' '1' ', in Sales Area Data'. now i have to check the customer no from XD02 and if it is existing in that tcode it should allow to save in the table maintenance otherwise throw a message as the 'Customer no does not exist, this I am unable to write so how can i check please help me .
thankx in advance.
Edited by: soni khadary on Apr 22, 2008 7:55 AM

Hi Kelly,
I guess <wa_tab>-handle_style is of type lvc_t_styl therefore you can do the following:
ls_edit-style = cl_gui_alv_grid=>mc_style_enabled.
"I assume you know your non-key fields' names so you can use subrotuine to perform update on each of them
ls_edit-fieldname = 'First field name' .
PERFORM update ls_edit.
ls_edit-fieldname = 'Second field name'.
PERFORM update ls_edit.
ls_edit-fieldname = 'Third field name'.
PERFORM update ls_edit
FORM update USING fs_edit type lvc_s_styl.
field-symbols: <style_tab> type lvc_t_styl,
                     <style_wa> type lvc_s_styl.
LOOP AT <tab> ASSIGNING <wa_tab>.
   if e_row = sy-tabix .
     "get you style table
     assign component 'HANDLE_STYLE' of structure <wa_tab> to <style_tab>.
     "as <style_tab> is typed fully you can read the row you are interested in
     read table <style_tab> assigning <style_wa> with key fieldname = fs_edit-fieldname
     if sy-subrc = 0.
       "update this entry
        <style_wa> = fs_edit.
*        modify table <style_tab> from <style_wa>.
     endif.
   endif.
endloop.
endform.
Note!
Though, this should work, the use of RTTI as Uwe suggested would be best practise approach as far as dynamic programming is concerned. Anyhow it is still up to you which one you pick.
Regards
Marcin
I noticed now that this line is not necessary
modify table <style_tab> from <style_wa>.
as we simply are working with field symbols, so changes made to <style_wa> are already visible in that table <style_tab>.
Edited by: Marcin Pciak on Mar 15, 2009 12:44 PM

Help with inserting records conditionally in another table

I need some help on this task please. I have a table with some records like so
Table1
Column1 Column2 Column3 Colum4
1 Name1 Lastname1 1,2
2 Name2 Lastname2 3
3 Name3 Lastname3 NULL
4 Name4 Lastname4 1,3
So the last column, Column4 has the number of the column that the values got changed. So the values on the first row on the Columns 1 and 2 got changed. So I have to insert those values in another table and the same for the other records.
Table2
Column1 Column2 Column3
1 Name1 NULL
2 NULL Lastname2
4 NULL Lastname4
Any ideas on how to accomplish this? Any ideas would be much appreciated.

Hi
Try below, Next time please POST DDL & DML
select 1 Column1, 'Name1' Column2, 'Lastname1'Column3, '1,2' Colum4 into #temp union all
select 2 , 'Name2', 'Lastname2', '3' union all
select 3 , 'Name3' , 'Lastname3', NULL union all
select 4, 'Name4', 'Lastname4', '1,3'union all
select 5, 'Name4', 'Lastname4', '1'
select 1 Column1 ,'Name1' Column2, NULL Column3 into #temp1 union all
select 2 ,NULL ,'Lastname2' union all
select 4, NULL, 'Lastname4'
select Column1, Column2, Column3, Colum4 ,C2,C1 from #temp a
--(select Column1, Column2, Column3, case when Colum4 like '%,%' OR Colum4 IS null then Colum4 else Colum4+',' end as Colum4 from #temp) a
outer apply (select COALESCE(Column2,Column3) From #temp1 where column1 = parsename(replace(a.colum4,',','.'),1)) a1(C1)
outer apply (select COALESCE(Column2,Column3) From #temp1 where column1 = parsename(replace(a.colum4,',','.'),2)) a2(C2)
You can also use split function
http://sqlperformance.com/2012/07/t-sql-queries/split-strings
select a.*,COALESCE(a2.Column2,a2.Column3) From #temp a
cross apply dbo.Split(Colum4,',') a1
left outer join #temp1 a2 on a1.item=a2.Column1
Thanks
Saravana Kumar C

Clueless NEWBIE DEVELOPER, NEEDS ASSIST with Insert Record Server Behavior

Experienced DW designer learning CFMX7. I cannot seem to get
beyond this error message when using the Insert Record server
behavior to write data from a form into the database. Using MS
Access 2002, CFMX7's internal server, DW 6.0. Please note that I am
learning development for the first time and am using tutorials. I
was able to connect at one point but now I cannot.
See error message below:
The following information is meant for the website developer
for debugging purposes.
Error Occurred While Processing Request
Error Executing Database Query.
Syntax error in INSERT INTO statement.
Resources:
Enable Robust Exception Information to provide greater detail
about the source of errors. In the Administrator, click Debugging
& Logging > Debugging Settings, and select the Robust
Exception Information option.
Check the ColdFusion documentation to verify that you are
using the correct syntax.
Search the Knowledge Base to find a solution to your problem.
Browser Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1;
SV1; .NET CLR 1.1.4322)
Remote Address 127.0.0.1
Referrer
http://localhost:8500/moosek/TMPu724j3nl2j.cfm
Date/Time 07-Aug-06 07:23 PM
Text
Text

MongoSlade,
I had this exact same problem with a CFMX 7 datasource that
was set up as Microsoft Access with Unicode. It turns out that
"Password" is a reserved word in the Unicode driver. Or somewhere.
I got around it by putting square brackets, i.e., [ ] around the
column name, like this:
update MyTable
set [Password] = '#form.Password#'
where UserID = '#form.UserID#'
That solved the problem nicely. I hope this solution will
work for you as well.

Need to create Table Maintenance with more than 400 characters

I need to create table maintenance in which one filed have more than 400 characters. CHAR type support between 1-255 & STRING type not supported by Table Maintenance. Is there any alternative type or solution for that?

Hi,
If you assign TMG to the table, it will throw error as unable to display the field on screen. why because it can able to display upto 255 char length only.
For this requirement you have 2 solutions :
1) Create multiple fields and your Z table, split the data and store them as required.
2) Create a TEXT ID and store it as a long text using FM CREATE_TEXT.
or
This type of text should be treated as Long Text.
And the steps are:
1. Create Text Object Using SE75.
2. Create Text ID Using SE75.
3. Now you have to Save the text with FM SAVE_TEXT.
For example:
The Most simple solution for it can be that Divide the field REMARKS of size 1000 in multiples of 200 characters like REMARK1, REMARK2....REMARKn.
Now you can create two FMs :
zset_data: To Store 1000 char long data in Table
Here you will divide the data of Variable (type char1024) in multiples of 200 and will store in REMARK1, REMARK2.....
zget_data: To Get 1000 char long data back from Table
Here you will concatenate REMARK1, REMARK2..... and will store in Variable of Type char1024.
This is the best solution if Table is not going to be maintained by Table Maintenance Generator.
regards,
ravi

HTTP 500 with Insert Record

I have a small ASP form that's been working fine with MS
Access database. I made some changes. Then I started getting HTTP
500 Internal Server Error when I'd click the submit button. I've
tried the following:
Checked that all files are there and working, i.e. connection
file, database file, ASP file, file for after submission.
Checked and tested the ODBC record.
Checked the driver on the server.
Created a new connection file from scratch.
Let Dreamweaver Insert Record Wizard create a new form from
scratch.
Intalled Dreamweaver on my server and tested DB connectivity,
etc. from the server itself.
Everything seems to work perfectly until you go to the live
page and submit the form.
Any help would be appreciated.

alanray wrote:
> I have a small ASP form that's been working fine with MS
Access database. I
> made some changes. Then I started getting HTTP 500
Internal Server Error when
> I'd click the submit button. I've tried the following:
> Checked that all files are there and working, i.e.
connection file, database
> file, ASP file, file for after submission.
> Checked and tested the ODBC record.
> Checked the driver on the server.
> Created a new connection file from scratch.
> Let Dreamweaver Insert Record Wizard create a new form
from scratch.
> Intalled Dreamweaver on my server and tested DB
connectivity, etc. from the
> server itself.
>
> Everything seems to work perfectly until you go to the
live page and submit
> the form.
>
> Any help would be appreciated.
You first need to provide a more detailed error message. In
internet
explorer advanced options turn off user friendly errors. Then
run the
page again and see what it says.
Dooza
Posting Guidelines
http://www.adobe.com/support/forums/guidelines.html
How To Ask Smart Questions
http://www.catb.org/esr/faqs/smart-questions.html

Javascript error with insert record. Please help!

I contacted Adobe support today and they said to get on these forums as they cant help with coding errors.
When i try to insert a Record I get the following error:
while executing onLoad in InsertRecord.htm, the following JavaScript error(s) occurred:
At line 665 of file "C:\Program Files\Adobe   DreamweaverCS4\Configaration\ServerBehaviours\PHP_MySQL\InsertRecord.js":
name    has no properties
Line 655
      if (columnName.toUpperCase() ==   name.toUpperCase())
Im running Win 7 64bit
I contacted Adobe support today and they said to get on these forums as they cant help with coding errors.
I have formatted my Pc and reinstalled and the same error comes up. If I try to edit and existing insert record it works fine, when I create a new page and then try to add a new insert recordset i get this erro again.
i have since reinstalled Windows & 32Bit to see if that helped, nope. I have installed no extensions its a clean install.
Any help after spending a small fortune on this software.

I think you are trying to run the program but you don't have the required class POP3Session.class or it's .java file which you can compile.
Another example for pop3 and smtp is on the following link..check if it helps you..
http://www.cs.umu.se/~hed/java/ch11.htm

How to delete the Table Contents before inserting records into SQL table ?

Hello Experts,
I have a scenario where in I have to Pick up some records from SAP RFC & insert into SQL table.
i know how to do this scenario but the proble with this is before inserting we first have to ZAP the SQL table & insert a new records. One more twist is The Triggering is happening from SAP side with Sender RFC. If this would have been from SQL Side i could have written a Stored Procedure/ Trigger & could have called this before the SENDER JDBC communciation channel picks up the Triggering event from SQL side.
So how to do this scenarioin XI, First deleting all the Records of SQL table & then inserting the new reocrds. without using the BPM.
Regards,
Umesh

hi umesh,
you can achieve this by writing SQL query in message mapping level..
refer this link:
http://help.sap.com/saphelp_nw04/helpdata/en/b0/676b3c255b1475e10000000a114084/frameset.htm
regards.

Moved site - pages with insert record forms not working

Not sure what has happened here. I have copied a site from:
www.goodsafariguide.com to:
www.goodsafariguide.net
The domains are on a shared reseller hosting account so are both pointing to the same database, but I noticed that pages with ADDT forms were not displaying at all.
I created a new page just with a basic form, and it works on the .com domain:
http://www.goodsafariguide.com/campkalahari/newform.php
But not on the .net domain:
http://www.goodsafariguide.net/campkalahari/newform.php
The database connection looks OK - any idea what the issue here could be?
Thanks.

Narrowed it down to the error:
PHP Fatal error: Class 'tNG_dispatcher' not found in /home/gsgnet12/public_html/campkalahari/index.php on line 27
I think I can see what all happened now. I originally got thrown because I uploaded the entire site, including a folder containing lots of hi-res photos, that were never uploaded originally. It looks as though files that weren't uploaded when the disk space ran out were still showing up in the file directory, but with a file size of 0k.
So then when I was reuploading files, Dreamweaver wasn't actually uploading them because it seemed to think they were already uploaded, and I could see them showing up on the remote server, so it all looked OK.
Anyway - it all looks OK now.

Quotation maintenance with infor record update field

Hi experts
When we use me47 to maintain the quotation , it has one field infor update field, Which we could set it as A,B,C. then the infor record will be updated.
May I check where I could maintain the A,B,C? We hope to set C update without plant as defalut content.
Please help give advice how to setup this ?
Thanks
ALice

Hi
Thanks a lot . When I use me47 to maintain one quotation, Then I click the item,
it will go to item screen,
There is one field - Update infor record under quotation data tab, which has A,B,C three choice.
I attached the description, I hope to know where to maintain this A,B,C, If I could set C as defalut one ?
Thanks
Alice
Indicator: Update Info Record
Determines whether:
The purchasing info record for this vendor and material is to refer to this PO item, and
The item is to be valid for the entire purchasing organization or just for the plant.
Use
The indicator determines which prices and conditions are suggested in future PO items.
Prices and conditions can apply to an entire purchasing organization or to a single plant within a purchasing organization.
For example, if you create a purchase order for a plant for which an info record has been defined at plant level, the purchase order is based on the conditions in the plant info record and not on the conditions that apply to the purchasing organization.
Procedure
Enter the relevant plant key:
A
Updating of the document number is effected at plant level as long as there is a purchasing info record at plant level. Otherwise the document number is updated at purchasing organization level.
B
Updating is effected at plant level if plant conditions are allowed for the plant.
C
Updating is effected without plant data if plant conditions are not necessary for the plant.
Dependencies
The level at which updating of the document number may be effected is defined for each plant.

Insert into two tables, how to insert multiple slave records

Hi, I have a problem with insert into two tables wizard.
The wizard works fine and I can add my records, but I need to enter multiple slave table records.
My database:
table: paper
`id_paper` INTEGER(11) NOT NULL AUTO_INCREMENT,
`make` VARCHAR(20) COLLATE utf8_general_ci NOT NULL DEFAULT '',
`model` VARCHAR(20) COLLATE utf8_general_ci NOT NULL DEFAULT '',
`gsm` INTEGER(11) NOT NULL,
PRIMARY KEY (`id_paper`)
table: paper_data
`id_paper_data` INTEGER(11) NOT NULL AUTO_INCREMENT,
`id_paper` INTEGER(11) NOT NULL,
`value` DOUBLE(15,3) NOT NULL,
`nanometer` INTEGER(11) NOT NULL,
PRIMARY KEY (`id_paper_data`)
I need to add multiple fields "value" and "nanometer"
Current form looks like this:
Make:
Model:
Gsm:
Value:
nanometer:
I need it to look like this:
Make:
Model:
Gsm:
Value:
nanometer:
Value:
nanometer:
Value:
nanometer:
Value:
nanometer:
and so on.
The field "id_paper" in table paper_data needs to get same id for entire transaction. Also how do I set default values for each field "nanometer" on my form the must be different (370,380,390 etc)?
Thanks.

you can find an answer here: http://209.85.129.132/search?q=cache:PzQj57dsWmQJ:www.experts-exchange.com/Web_Development /Software/Macromedia_Dreamweaver/Q_23713792.html+Insert+Into+Two+Tables+Wizard&cd=3&hl=lt& ct=clnk&gl=lt
This is a copy of the post:
Hi experts,
Im using ADDT to design a page that needs to insert one record into a master ALBUMS table, along with three records into a GENRES table, all linked by the primary, auto-incremented ALBUMS. ALBUM_ID.
Ive tried many different ways of combining the Insert into Multiple Tables wizard and the insert record wizard with Link Transactions, all with no luck. Either only the album info gets inserted, or a ALBUM_ID cannot be null error from MySQL. Here is the structure of the tables
ALBUMS
ALBUM_ID, INT(11), Primary, Auto_Increment
alb_name, varchar
alb_release, YEAR
USER_ID, int
alb_image, varchar
GENRES
ALBUM_ID, int, NOT NULL
GENRE_ID, int, NOT NULL
ID, int, primary, auto-increment
Many thanks in advance...
==========================================================================================
//remove this line if you want to edit the code by hand
function Trigger_LinkTransactions(&$tNG) {
global $ins_genres;
$linkObj = new tNG_LinkedTrans($tNG, $ins_genres);
$linkObj->setLink("ALBUM_ID");
return $linkObj->Execute();
function Trigger_LinkTransactions2(&$tNG) {
global $ins_genres2;
$linkObj = new tNG_LinkedTrans($tNG, $ins_genres2);
$linkObj->setLink("ALBUM_ID");
return $linkObj->Execute();
function Trigger_LinkTransactions3(&$tNG) {
global $ins_genres3;
$linkObj = new tNG_LinkedTrans($tNG, $ins_genres3);
$linkObj->setLink("ALBUM_ID");
return $linkObj->Execute();
//end Trigger_LinkTransactions trigger
//-----------------------Different Section---------------------//
// Make an insert transaction instance
//Add Record Genre 1
$ins_genres = new tNG_insert($conn_MySQL);
$tNGs->addTransaction($ins_genres);
$ins_genres->registerTrigger("STARTER", "Trigger_Default_Starter", 1, "VALUE", null);
$ins_genres->registerTrigger("BEFORE", "Trigger_Default_FormValidation", 10, $detailValidation);
$ins_genres->setTable("genres");
$ins_genres->addColumn("GENRE_ID", "NUMERIC_TYPE", "POST", "GENRE_ID");
$ins_genres->addColumn("ALBUM_ID", "NUMERIC_TYPE", "VALUE", "");
$ins_genres->setPrimaryKey("ID", "NUMERIC_TYPE");
// Add Record Genre 2
$ins_genres2 = new tNG_insert($conn_MySQL);
$tNGs->addTransaction($ins_genres2);
$ins_genres2->registerTrigger("STARTER", "Trigger_Default_Starter", 1, "VALUE", null);
$ins_genres2->setTable("genres");
$ins_genres2->addColumn("GENRE_ID", "NUMERIC_TYPE", "POST", "GENRE_ID2");
$ins_genres2->addColumn("ALBUM_ID", "NUMERIC_TYPE", "VALUE", "");
$ins_genres2->setPrimaryKey("ID", "NUMERIC_TYPE");
// Add Record Genre 3
$ins_genres3 = new tNG_insert($conn_MySQL);
$tNGs->addTransaction($ins_genres3);
$ins_genres3->registerTrigger("STARTER", "Trigger_Default_Starter", 1, "VALUE", null);
$ins_genres3->setTable("genres");
$ins_genres3->addColumn("GENRE_ID", "NUMERIC_TYPE", "POST", "GENRE_ID3");
$ins_genres3->addColumn("ALBUM_ID", "NUMERIC_TYPE", "VALUE", "");
$ins_genres3->setPrimaryKey("ID", "NUMERIC_TYPE");
=========================================================================================
Hi Aaron,
Nice job!!
$ins_albums->registerTrigger("AFTER", "Trigger_LinkTransactions2", 98);
$ins_albums->registerTrigger("AFTER", "Trigger_LinkTransactions3", 98);
These lines, right? :-( Sorry I forgot to mention that
Thanks a lot for the grading!

How to change width of table maintenance screen in sm30

Hi,
I want to change the width of table maintenance screen in sm30 of a view. I am trying to change it through screen painter.
But its giving me error - screen or window limit reached. I want to increase the widht to show all the fields at once.
Is there any way for this?
Also, earlier in table maintenance generator of view, there was one step selected. I changed it to two steps and re-generated the TMG. But again Its showing only one screen in sm30.
Kindly tell me which step I have missed out.
Regards,
Seema Naharia

I guess the links below should help in your problem ..
http://www.saptechies.com/how-to-create-table-maintenance-generator/
Window size on SM30
If these do not please tell ..
Regards,
Manthan

Table maintenance

Hi,
There are two ways to maintain Data records in a table :
1. By program : using insert/delete/modify or update statement.
2. By table maintenance
What is the advantage or disadvantage of one process to another.
Thanks & Regards,
Abhishek Sarkar

Hi,
Table maintenance is used to maintain data in the tables created (ZTABLE)
Generally for inserting new records into custom table thru transaction SM30, we need to enter all the values manually and save the record.
When certain data for the key fields needs to be populated automatically while creating entries, the steps involved are:
Maintaining the subroutine in view V_TVIMF for a particular custom table.
Logic for extracting relevant data for the fields entered, when user press enter button.
Check this blog for more information on extracting data in table maintenance.
/people/sudheer.cheedella/blog/2006/02/20/extracting-data-in-table-maintenance
With the help of the table maintenance generator, you are able to maintain the ENTRIES of the table in SM30 transaction.
It can be set in transaction SE11 - Tools - Table maintenance generator.
Table maintenance Generator is used to manually input values using transaction sm30
follow below steps
1) go to se11 check table maintenance check box under attributes tab
2) utilities-table maintenance Generator-> create function group and assign it under
function group input box. Also assign authorization group default &NC& .
3) Select standard recording routine radio in table table maintenance generator to move table
contents to quality and production by assigning it to request.
4) Select maintenance type as single step.
5) maintenance screen as system generated numbers this dialog box appears when you click on create button
6) save and activate table
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
SM30 is used for table maintenance(addition or deletion of records),
For all the tables in SE11 for which Table maintenance is selected , they can be maintained in SM30
Sm30 is used to maintain the table ,i.e. to delete ,insert or modify the field values and all..
It creates the maintenance screen for u for the particular table as the maintenance is not allowed for the table..
In the SE11 delivery and maintenance tab, keep the maintenance allowed..
Then come to the SM30 and then enter the table name and press maintain..,
Give the authorization group if necessary and give the function group and then select maintenance type as one step and give the screen numbers as system specified..
Then create,,,
Then u will able to see the maintenance view for the table in which u can able to insert and delete the table values...
We use SM30 transaction for entering values into any DB table.
First we create a table in SE11 and create the table maintenance generator for that Table using (utilities-> table maintenance generator) and create it.
Then it will create a View.
After that from SM30, enter the table name and Maintain, create new entries, change the existing entries for that table.
check these links --
http://help.sap.com//saphelp_470/helpdata/EN/a7/5133ac407a11d1893b0000e8323c4f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_46c/helpdata/en/a7/5133ac407a11d1893b0000e8323c4f/frameset.htm
/message/2831202#2831202 [original link is broken]
Re: Regarding Table Mainantance Generator
Re: table maintenance
table maintenance generator
Re: Table maintenance generator
Regards
Sudheer

Table maintenance view - tcode

Hi experts,
We have a tcode (already in production) created for table maintenace view of z-table.
Everything is working fine.
Now I added one new field to the z-table and changed the table maintenance view accordingly. In SM30 I can maintain the table without difficulties - the new field is visible and maintenable. However, when I call the transaction code created for this view, it doesn't have the new field yet. I tried a lot but without success to update the tcode accordingly.
How can I get the tcode adjusted with the new field?
Thanks for your advise and help in advance!
Your feedback will be << appreciated >>.
Regards,
Sally
Please do not offer rewards.
Edited by: Rob Burbank on Dec 6, 2009 5:22 PM

It's about one week you asked the question, but I answer in case you didn't understand what happened:
First, screens 1000-1010 can't be used in a table maintenance dialog (an error is mentioned by SAP when you try to use these numbers). So, I really don't understand how you can get 1000 in your table view!
So, I think that your transaction is linked to a custom program (not the SM30 view). So you just need to adapt manually the custom program. Note: maybe the program is a partial copy of the SM30 function group, so maybe you may just copy the dynpro 1000 of the SM30 function group to the dynpro 1001 of your custom program...
Note: when you want to create a transaction which is linked to a table maintenance view (SM30), you must define a Z* transaction of type parameter, with reference to SM30 transaction, select "skip initial screen", do not choose any dynpro, and choose VIEWNAME = your view and UPDATE = X as parameter values.

ABAP Table Maintenance Events

Hello All ,
I have created the Table Maintenance with Events .
When the user enter the sales order number & item in the Txn code screen of the table .The Event 05 triggers & pulls out information for Sales Order Customer ,Material ,Plant & show it in the screen .
There are two more fields for user input Valid to & Valid from , the user now fills in these fields & then press Save button in the screen .
Now He gets the Short dump related to duplicate entries .
I checked the standard code & it is trying to enter data into the Internal table
MOD_ELEM_TAB & since already the same entry exsist in this table so program dumps out .
Kindly suggest the way to solve this issue .
Best regards,
Anurag Goel .

Check with table primary keys and if you are creating same data again and again,
then you will get short dump..
so keep the validation like if record already exits then give message.
else you want to create same data again and again then create one more field and it is like count (keep as primary key ).
Reward Points if it is helpful
thanks
Seshu

Table maintenance with insert records in SM30

Similar Messages

Maybe you are looking for