Table Required for Delivered Qty field in Sales Order

Hi friends
I can see confirmed order qty, required qty, quantity committed in VBEP table.
But if you see in sales order Schedule Lines you'll see one more field named as
Delivered Quantity.
I am not able to find this Delivered Qty in any of the SD tables....
pls help me to find this table and field
Pts rewarded for helpful ans..
Thanks and regards
Snehal

hi,
delivery related data is stored in LIKP and LIPS tables
related to sd.
reward points if hlpful.

Similar Messages

T code for editing the field in Sales Order

Dear All,
I want to change some field in sales order (display to editable)...
Please suggest me..........
Regards
Lallan....

Dear,
I hope it will reach your req:
Same post.....
Sales Order editing fields
Sap help.
http://help.sap.com/saphelp_47x200/helpdata/en/7d/f63a0d015111d396480000e82de14a/frameset.htm
How to do this process with screen shots..
http://www.mortenhjorthnielsen.dk/Security/transactionvariants.htm
Regards
Chandra

Table name for pick qty field in outbounddelivery

Hi all
can anybody please give the table name for the field pick qty in the outbound delivery.
regards
chandra

Hi,
The picked quantity is used in the structure LIPS, field PIKMG. It doesnu2019t belong to any transparent table.
this issue was been discussed in the abaper forum :
about "Pick quantity".

Delivery Qty and OPEN Qty Field in SALES Order Delivery Reports.

Dear All Experts.
Please Help me for which field put for Delivery QTY. and it is necessary to calculate OPEN QTY. or we can put directly from field.
i used this field for Order Qty : WMENG.
Please Guide me.
Thnks With Regards :
Bhavesh Panchal.

Delivery qty - LIPS-LFIMG.
You cannot get open quantity directly.
use this way.
Delivery qty - LIPS-LFIMG.
order qty - VBAP-KWMENG.
open qty = delivery qty - order qty.

Query for calculating raw material requirements for the remaining quantities in sale order.

Dear SAP Experts,
Clients requirement :
Client wish to know the quantities of raw materials needs to run the production order inorder to complete the remaining quantities in sale order.
Need Clarification:
I"m using the below query for this requirement. I wish to know whether this query suits for my clients requirement or not. If its so, I need to know how to group by T4.[Code] (Raw material Name) and need to get the sum of T4.[Quantity] (BOM quantity) and (T1.[OpenQty]*T4.[Quantity]) as TOTALQTY under each raw material group
SELECT T0.[DocNum], T0.[DocDate], T0.[CardCode],T0.[CardName], T1.[ItemCode], T1.[Dscription], T1.[Quantity] as salesorderQty , T1.[OpenQty], T2.onhand, T4.[Code] as Raw material Name,T4.[Quantity] as BOMQTY, (T1.[OpenQty]*T4.[Quantity]) as TOTALQTY FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.[DocEntry] = T1.[DocEntry] INNER JOIN OITM T2 ON T1.[ItemCode] = T2.[ItemCode] INNER JOIN OITT T3 ON T2.[ItemCode] = T3.[Code] INNER JOIN ITT1 T4 ON T3.[Code] = T4.[Father] WHERE T0.[DocStatus] ='o'

You're posting in the Portuguese B1 space.
You might want to post in the English one: SAP Business One Application

Order related billing for Partial Qty item in sales order

Hi SD Gurus,
In case of delivery-related billing we can create a bill for partial qty or item by creating delivery(against order) for partial qty/item. Is it possible to create order-related bill for the partial qty or item ?
Any suggestion on the subject is appreciated.
Thanks in advance,
Velmurugan

HI Velmurugan,
This can be solved through by doing an order related billing,
First check weather copy control setting is there for order to billing.
In item category check for billing relevance. Make it has order related billing.
Now do order related billing for partial quantity.
Regards,
Nagesh

Cost centre field in sales order account assignment screen

Hello all,
I am unable to find the settings for cost center field in sales order account assignment tab screen along with profit center and internal order. kindly let me know the path to select cost center.
Thanks in advance
Raju

The Cost Center Determination settings is in OVF3 - but there are some cases where the Cost Center must be exceptionally changed.
If the document category for order type in IMG VOV8 is defined to be "I" which belong to order type FD - Deliv.Free of Charge, then the field cost center is active for input during transaction VA01.
Alternatively, you can specify an order reason and assign a cost center to an order reason.
However the standard SAP works only at the header level though, so it would not work if cost center is needed on the line item.
The cost center are assign for such business transactions as :
- Free deliveries
- Returns
- Deliveries of advertising materials
You can also make cost center allocation dependent on the order reason, for example:
Order reason: Damage in transit
Order reason: Free sample
Both the IMG settings are done in transaction OVF3, either with/without the order reason.

Delivered qty' field appears on IN ,QT SA 's schedule screen

The delivered qty is updated on sales order that the delivery made from. It supposes to update on ref in or qt that the order created from as well but we found that it doesn't although the copy control settings between enquire document type and order document type is in place.
i came to knew that The delivery quantity is reflected to sales order, but not to Inquiry or Quotation.
Well, my doubt is why the 'delivered qty' field appears on inquiry schedule screen.There must be a reason to keep it on the screen both for inquiry and quotation.
if i want to update Delivered qty at QT level what i have to do.. (plz don't ask me why u want at qt level or inqury level)
With regards,
San Rao.

Hi,
Delivery qty udated onely those document, from which document you made delivery document
Mean to asy if you create delivery with refrance to order then it can update in order.
Not in Inquiry nor quotation.
Kapil
Edited by: Kapildev Farakte on Feb 5, 2010 2:27 PM

Which field in sales order lines for customer reference no.

Dear Experts,
Which field should I use for customer reference no. in sales order LINES?
These values can not be duplicated in each sales order just like NumatCard in sales orders.
regards,
Kim

Hi Gun Tae Kim...
Select The User defined fields
Select The Marketing Document and ADD THE REQUIRED FIELD IN THE ROW AND CHECK
CHECK WITH THE LINK FOR DETAILED INFORMATION
http://www.pioneerb1.com/wp-content/uploads/2012/06/How-to-Create-User-Defined-Fields-and-Tables.pdf
HOPE HELPFUL
Regards
Kennedy

How to make a field in sales order a required field

Hi,
How do i make a certain field in sales order a required field. I want to make the assignment field in accounting tab a required field. How do i configure this.
Thank you.
Rachelle

In you know the Transaction and screen Variant Configurations.
Use T-code SHD0
Put your Sales Order t-code There : Va01
Then Select the feilds or tabs whatever you want as mandatory , optional.
Customize as per your requirement and save the variant.
Next GO to the Sales Document types :
There In the Transaction flow you will find at variant feild.
Assign this variant there.
Next when ever you do sales Order for that Document type the feilds will be taken in the fashion of the variant.
regards,
SAP SD

Table required for billing and RG1 output

Dear all,
pls give me the list of tables required for billing output and RG1 output

Hello Digs,
Just check out these sites and see if this is useful to you
http://www.erpgenie.com/abap/tables_sd.htm
http://www.erpgenie.com/saptech/transactions.ht
<b>**Reward if this helps**</b>
Regards
AK

Table name for email-address field

Hi,
What is the table name for email address field present in address tab of vd03 transaction

>
abap developer wrote:
> adr6 table is for email address present in contact persons tab in vd03 transaction.I need the table name for email address field present in address tab in vd03 transaction.
every thing will be stored in ADR6. with Different addressnumbers contact Person address is different and customer address is different.
there will be 2 different entries in ADR6.

What is table of Rate field in Sales Order document (VA03)?

Hello everyone!
I need to check in what table is the Rate value in the Sales Order document saved..
Unfortunately, it is not in VBAP as I first expected. Only the Net price is there, not the Rate.
Thank you very muchh!

Hi,
KONV. use vbak-knumv as the key to access the table.
Regards
Raju Chitale

Production Order and Internal Order for each item of the sales order

Hi
   I am developing Make To Order Report where I have to display the MTO Line Items and non MTO Line Items. For non MTO Line Items I have to display Internal order with Planned and Actual Costs and also Production Order with Planned and Actual Costs. Could anybody tell how to get the Internal order no and production order with Planned and Actual costs for each line item for a sales order.
Thanks
Naga

Hi,
You can get the Production orders, Planned orders, Internal orders generated for Sales order item from AFPO table (use fields KDAUF-Sales order number & KDPOS-Sales order item). Then to identify the order type use order category (AUTYP) from table AUFK.
Once you have the Production/internal order, you can ge the cost from COSS and COSP table. Use the object number from AUFK to get the cost entries from COSS & COSP.
You can use the following sample code as reference.
Hope this is helps.. (Don't forget to mark it... )
Form GET_COSTS                                                       *
Get the material cost, labour hours and the labour cost for the      *
sales order material.                                                *
There are no interface parameters to be passed to this subroutine.   *
FORM GET_COSTS.
DATA V_OBJNR LIKE AUFK-OBJNR.
DATA v_menge LIKE vbap-kwmeng.
SELECT SINGLE OBJNR
    INTO V_OBJNR
    FROM AUFK
   WHERE AUFNR EQ AFPO-AUFNR.
SELECT * FROM COSS
   WHERE OBJNR EQ V_OBJNR
     AND WRTTP IN ('01', '04'). " p_wrttp. "Labour Cost ( Plan, Actual)
    PERFORM GET_VALUES_FROM_COSS.
ENDSELECT.
SELECT * FROM COSP
   WHERE OBJNR EQ V_OBJNR
     AND WRTTP IN ('01', '04')         " p_wrttp
     AND KSTAR NE '0000510033'. " EQ p_kstar2.      "Material Cost
    PERFORM GET_VALUE_FROM_COSP.
ENDSELECT.
Get the unit cost of the production order by dividing the production
cost by the order quantity. The result will be multiplied by the
GL posting qunatity (Delivery quantity) to get the production cost
for the quantity being deluivered.
IF NOT AFPO-PSMNG IS INITIAL.
    OUT_REC-LABOUR_HOURS_ACT = OUT_REC-LABOUR_HOURS_ACT / AFPO-PSMNG.
    OUT_REC-ADDNL_LABOUR_HOURS_ACT =
                      OUT_REC-ADDNL_LABOUR_HOURS_ACT / AFPO-PSMNG.
    OUT_REC-LABOUR_HOURS_PLN = OUT_REC-LABOUR_HOURS_PLN / AFPO-PSMNG.
    OUT_REC-ADDNL_LABOUR_HOURS_PLN =
                     OUT_REC-ADDNL_LABOUR_HOURS_PLN / AFPO-PSMNG.
    OUT_REC-LABOUR_COST_ACT = OUT_REC-LABOUR_COST_ACT / AFPO-PSMNG.
    OUT_REC-ADDNL_LABOUR_COST_ACT =
                     OUT_REC-ADDNL_LABOUR_COST_ACT / AFPO-PSMNG.
    OUT_REC-LABOUR_COST_PLN = OUT_REC-LABOUR_COST_PLN / AFPO-PSMNG.
    OUT_REC-ADDNL_LABOUR_COST_PLN =
                     OUT_REC-ADDNL_LABOUR_COST_PLN / AFPO-PSMNG.
    OUT_REC-MATERIAL_COST_ACT = OUT_REC-MATERIAL_COST_ACT / AFPO-PSMNG.
    OUT_REC-ADDNL_MATERIAL_COST_ACT =
                     OUT_REC-ADDNL_MATERIAL_COST_ACT / AFPO-PSMNG.
    OUT_REC-MATERIAL_COST_PLN = OUT_REC-MATERIAL_COST_PLN / AFPO-PSMNG.
    OUT_REC-ADDNL_MATERIAL_COST_PLN =
                     OUT_REC-ADDNL_MATERIAL_COST_PLN / AFPO-PSMNG.
ENDIF.
Multiply the calculated Unit Production costs with the GL quantity to
get the actual production cost of the quantity delivered.
Calculation for Labour Hours
OUT_REC-LABOUR_HOURS_ACT = OUT_REC-LABOUR_HOURS_ACT *
                             OUT_REC-QUANTITY.
OUT_REC-ADDNL_LABOUR_HOURS_ACT = OUT_REC-ADDNL_LABOUR_HOURS_ACT *
                             OUT_REC-QUANTITY.
OUT_REC-LABOUR_HOURS_PLN = OUT_REC-LABOUR_HOURS_PLN *
                             OUT_REC-QUANTITY.
OUT_REC-ADDNL_LABOUR_HOURS_PLN = OUT_REC-ADDNL_LABOUR_HOURS_PLN *
                             OUT_REC-QUANTITY.
Calculation for Material Cost
OUT_REC-MATERIAL_COST_ACT = OUT_REC-MATERIAL_COST_ACT *
                              OUT_REC-QUANTITY.
OUT_REC-ADDNL_MATERIAL_COST_ACT =
      OUT_REC-ADDNL_MATERIAL_COST_ACT * OUT_REC-QUANTITY.
OUT_REC-MATERIAL_COST_PLN = OUT_REC-MATERIAL_COST_PLN *
                              OUT_REC-QUANTITY.
OUT_REC-ADDNL_MATERIAL_COST_PLN =
      OUT_REC-ADDNL_MATERIAL_COST_PLN * OUT_REC-QUANTITY.
Calculation for Labour cost
OUT_REC-LABOUR_COST_ACT   = OUT_REC-LABOUR_COST_ACT *
                               OUT_REC-QUANTITY.
OUT_REC-ADDNL_LABOUR_COST_ACT = OUT_REC-ADDNL_LABOUR_COST_ACT *
                              OUT_REC-QUANTITY.
OUT_REC-LABOUR_COST_PLN   = OUT_REC-LABOUR_COST_PLN *
                              OUT_REC-QUANTITY.
OUT_REC-ADDNL_LABOUR_COST_PLN = OUT_REC-ADDNL_LABOUR_COST_PLN *
                              OUT_REC-QUANTITY.
Get the planned material cost from the total of the planned cost of
the component materials in the production order confirmations.
SELECT BWART MENGE MATNR SHKZG FROM AUFM
    INTO (AUFM-BWART, AUFM-MENGE, AUFM-MATNR, AUFM-SHKZG)
   WHERE AUFNR EQ AFPO-AUFNR.
    CHECK AUFM-BWART NE '101'.
    READ TABLE I_MBEW WITH KEY MATNR = AUFM-MATNR
                               BWKEY = AFPO-DWERK.
    IF SY-SUBRC NE 0.
      SELECT MATNR BWKEY ZPLPR LPLPR PEINH
        FROM MBEW
        INTO I_MBEW
       WHERE MATNR EQ AUFM-MATNR
         AND BWKEY EQ AFPO-DWERK.
        APPEND I_MBEW.
      ENDSELECT.
    ENDIF.
    IF SY-SUBRC EQ 0.
      IF I_MBEW-ZPLPR NE 0.
        IF AUFM-SHKZG EQ 'H'.
          OUT_REC-PLANNED_MATERIAL_COST =
          OUT_REC-PLANNED_MATERIAL_COST +
                       ( I_MBEW-ZPLPR * AUFM-MENGE / I_MBEW-PEINH ).
        ELSE.
          OUT_REC-PLANNED_MATERIAL_COST =
          OUT_REC-PLANNED_MATERIAL_COST -
                       ( I_MBEW-ZPLPR * AUFM-MENGE / I_MBEW-PEINH ).
        ENDIF.
      ELSEIF I_MBEW-LPLPR NE 0.
        IF AUFM-SHKZG EQ 'H'.
          OUT_REC-CURRENT_MATERIAL_COST =
          OUT_REC-CURRENT_MATERIAL_COST +
                       ( I_MBEW-LPLPR * AUFM-MENGE / I_MBEW-PEINH ).
        ELSE.
          OUT_REC-CURRENT_MATERIAL_COST =
          OUT_REC-CURRENT_MATERIAL_COST -
                       ( I_MBEW-LPLPR * AUFM-MENGE / I_MBEW-PEINH ).
        ENDIF.
      ENDIF.
    ENDIF.
ENDSELECT.
Get the Future material cost per Unit by deviding the calculated
Future material cost above with the goods reciept quantity to, then
multiply the unit cost with the GL quantity to get the Future material
Cost for the Quantity delivered. (Quantity in the entery from GLPCA
Table).
IF NOT AFPO-WEMNG IS INITIAL.
    OUT_REC-PLANNED_MATERIAL_COST =
       OUT_REC-PLANNED_MATERIAL_COST / AFPO-WEMNG * OUT_REC-QUANTITY.
    OUT_REC-CURRENT_MATERIAL_COST =
       OUT_REC-CURRENT_MATERIAL_COST / AFPO-WEMNG * OUT_REC-QUANTITY.
ENDIF.
ENDFORM.                               " GET_COSTS
Form GET_VALUE_FROM_COSP                                             *
Get the Material cost from COSP table.                               *
There are no interface parameters to be passed to this subroutine.   *
FORM GET_VALUE_FROM_COSP.
FIELD-SYMBOLS: <FS> TYPE ANY.
DATA: V_COMPONENT TYPE I.
Cummulate the posting values of all the 16 period buckets as to get
total production order cost. This is to handle the aprtial posting of
prodction order values in diffrent periods.
V_COMPONENT = 15.
DO 16 TIMES.
    ADD 1 TO V_COMPONENT.
    ASSIGN COMPONENT V_COMPONENT OF STRUCTURE COSP TO <FS>.
    IF COSP-WRTTP EQ '04' AND COSP-KSTAR EQ P_KSTAR2.
      ADD <FS> TO OUT_REC-MATERIAL_COST_ACT.
    ELSEIF COSP-WRTTP EQ '04'.
      ADD <FS> TO OUT_REC-ADDNL_MATERIAL_COST_ACT.
    ELSEIF COSP-WRTTP EQ '01' AND COSP-KSTAR EQ P_KSTAR2.
      ADD <FS> TO OUT_REC-MATERIAL_COST_PLN.
    ELSEIF COSP-WRTTP EQ '01'.
      ADD <FS> TO OUT_REC-ADDNL_MATERIAL_COST_PLN.
    ENDIF.
ENDDO.
ENDFORM.                               " GET_VALUE_FROM_COSP
Form GET_VALUES_FROM_COSS                                            *
Get the Labour cost and Labour hours from the COSS table.            *
There are no interface parameters to be passed to this subroutine.   *
FORM GET_VALUES_FROM_COSS.
FIELD-SYMBOLS: <FS1> TYPE ANY,
                 <FS2> TYPE ANY.
DATA: V_COMPONENT1 TYPE I,
        V_COMPONENT2 TYPE I.
Cummulate the posting values of all the 16 period buckets as to get
total production order cost. This is to handle the aprtial posting of
prodction order values in diffrent periods.
V_COMPONENT1 = 15.
V_COMPONENT2 = 111.
DO 16 TIMES.
    ADD 1 TO: V_COMPONENT1, V_COMPONENT2.
    ASSIGN COMPONENT V_COMPONENT1 OF STRUCTURE COSS TO <FS1>.
    ASSIGN COMPONENT V_COMPONENT2 OF STRUCTURE COSS TO <FS2>.
    IF COSS-WRTTP EQ '04' AND COSS-KSTAR EQ P_KSTAR1.
      ADD <FS1> TO OUT_REC-LABOUR_COST_ACT.
      ADD <FS2> TO OUT_REC-LABOUR_HOURS_ACT.
    ELSEIF COSS-WRTTP EQ '04'.
      ADD <FS1> TO OUT_REC-ADDNL_LABOUR_COST_ACT.
      ADD <FS2> TO OUT_REC-ADDNL_LABOUR_HOURS_ACT.
    ELSEIF COSS-WRTTP EQ '01' AND COSS-KSTAR EQ P_KSTAR1.
      ADD <FS1> TO OUT_REC-LABOUR_COST_PLN.
      ADD <FS2> TO OUT_REC-LABOUR_HOURS_PLN.
    ELSEIF COSS-WRTTP EQ '01'.
      ADD <FS1> TO OUT_REC-ADDNL_LABOUR_COST_PLN.
      ADD <FS2> TO OUT_REC-ADDNL_LABOUR_HOURS_PLN.
    ENDIF.
ENDDO.
ENDFORM.                               " GET_VALUES_FROM_COSS

Confirmation of the production order qty equal to sales order qty

Hi Experts,
I need to control the confirmation of the production order should be equal to sales order qty.
I'm having the scenario as follows
If sale order qty for X material = 3
while running the MRP, system will plan the order qty as 8 because of we maintained rounding profile in the Material master and enhancement we used for this.
Rounding Profile Qty=5
Total Production Order Qty=8.
But, finally they will do the GRN for sales order qty only, remaining will be used for testing purpose.
So, the confirmation also has to happen for only sales order qty. There, we need to control the qty based on the sales order.
Is there any exit or Enhancement is available for this.
Please help me.
Naren

Hi,
Exit for confirmation check is CONFPP04.
However, opening orders for quantities higher than demand and leaving pieces undelivered and unconfirmed in production orders does not make sense. I could not get the requirement of incresing production quantity by adding rounding value? Moreover, if rounding is to be used for test purposes, why not do you receive them into stock? Why don't you receive 8 pieces into stock, deliver 3 pieces to sales order and transfer 5 pieces to related department?
If it is because of MRP and you really do not want to produce extra 5 piece immediately, you may use material reservation or any other form of demand for 5 pieces, use EX for lot size calculation and have MRP create two planned orders for sales order and testing requirement, then you can convert planned order for sales order requirement into production order and continue processing.
Regards.

Table Required for Delivered Qty field in Sales Order

Similar Messages

Maybe you are looking for