Corrupted after SaveAs

Post Author: queen3
CA Forum: General
I use C#/VBScript (tried both) to update database location for all subreports and save new report:- open report- update location (LogOnInfo / SetTableLocation / etc);- SaveAs.Nothing more. This works fine on my machine. However, on client's computer the only subreport which uses stored procedure (others use views) is saved with fields messed up. For example, there're 2 fields: "number" and "text" with display formulas. After saving they "field source" is flipped - "number" become "text" and vice versa. However, their formulas remains the same! So after SaveAs we got "number" with text formula and "text" with number formula! This results in incorrect displaying and errors in formulas (like, "a string is required here").The fields are not swapped; there're 9 fields and they are RANDOMLY replaced with another ones, some of them even remain valid.This happens only on client's computer and only for subreport which uses stored procedure.

FIXED!
if you have this issue the best way to see if the dynamiclink server is in a crash loop. It will intermittently freeze your machine. On the task manager you will see it starting and quitting.
see http://forums.adobe.com/message/3196845#3196845
post 15. Solved it for me (the prefs in dynamiclinkmanager)
cheers
chris

Similar Messages

Workflow corrupted after save from Builder

We loaded a WFT file into the Workflow Builder, and saved it to a database. There was no indication of any error, and the icon in the builder switched to the database schema as expected. When we subsequently attempted to load this workflow from the database into the Workflow Builder we got several errors displayed, and it was clear that much was missing (e.g. no processes were displayed). On examination of the workflow tables, it seemed that some tables had been updated with the new version, others had not. This was the 5th or 6th version of this workflow, and it has always been saved in the same way. It has been saved successfully on a different server. We could do nothing with the corrupted version, we could not delete it or save it again. We had to restore the database. Any ideas what may have gone wrong here?
TIA

Problem solved - on the failing servers the WF_LOCAL_LANGUAGES table had only GB flagged as an installed language - the servers which worked had only US flagged as an installed language. Correcting this and the workflow saves correctly.

JPG files become corrupt after Exporting in LR 3

Does anyone have any idea what would cause
my JPG files to be corrupt after I export my edited Raw images in LR3? There are no problems with the Raw file, but once I edit them, apply what ever settings to them in LR I need, I export them as JPG to the same hard drive but in a sub folder where the raw files are, they will not open in photoshop or anywhere else. They are corrupt or lacking data???? When I upload them to my proofing website, there are colored streaks all through the image. Now, I noticed that when I go into that folder of RAW images, and delete the .xmp files, I have to start over, but it fixes the problem. So, now, I can't use .xmp sidecar files to save my editing. I'm fairly new to LR, so any suggestions would be great. I did recently upgrade my system to OS windows 7. Everythign was fine till I had to reinstall everything on my computer...and I also changed hard drives. I upgraded to a Terabyte drive moving all my images from a 500G to the terabyte. Could that cause my sidecar files to be corrupted?????
Thank you!!!!!

I doubt that the XMP files have anything to do with this, as Lightroom doesn't use these files when it creates an exported file.
It sounds like your hardware may be the culprit; these types of corrupt files are often caused by a failing hard drive. Some corruption may have happened in the transfer from one hard drive to another; or the new hard drive has some sort of problem.
Can you hook up the old hard drive again and see what happens to the photos there? Open one of them and compare it to the photo on the new hard drive.

Photoshop CS5.1 file corrupted after crash

I had spent my artwork for many days with so many effort and time, and it has been corrupted after a computer crash (not PSD crash). I am using Windows 7.
What happened after: 1 black layer (around 59 MB)
What happened before: Had multiple saves, 15+ layers (so why it is not back to the latest save?)
I tried: Previews in PSD, Bridge, using recovery programs (none worked), hex editor, searched for temp./restore previous version files (none)
Please tell me how to recover this file. I know that I will create backups next time, but please help me with this issue (can't find solution anywhere else e.g. articles)

Have you the Shadow Copy option enabled? When yes you can try a right click on the appropriate file an the click on "Previous versions". If there's nothing, I'll see no chance.
Axel

Can not refresh page after save properly(When not saving master record)

I am using jdeveloper 11g R2 (11.1.2.3) JSF Facelet
In some use case I have Address as master table and Person as detail table
For some business reason I need to don't save same addresses
eg:
If +1 Test St+ is in database already and new user coming and adding this address with new person
I need to use the row in database not creating a new address
I do saving in doDML method of Address with some hashing algorithm and it is fine
My problem is that I can not refresh page after save properly
User coming to page think Adding a new address and a new person but in fact no new
address added because of business I describe above
Any ideas how I can implement this?
Appreciate that
Regards
Mohsen

Hi,
from your description it is not clear why the page doesn't refresh. It could be a problem in your implementation code - who knows. What if you perform the address check on a command button that actually submits the new address? If the check returns true (address exists) you would call row.refresh(forget new row); and re-query the view object so the address coming from the database is displayed. If you wanted to use the doDML then yuou need to be aware that doDML doesn't help removing the row the user created. It just ignores the database update but the entity is still around, which in my suggested solution wont be the case.
Frank

Why does iTunes freeze up for minutes at a time when modifying INFO (CMD-i) ? My files are not corrupted after it is done like many other threads i have readed.

Why does iTunes freeze up for minutes at a time when modifying INFO (CMD-i) ? My files are not corrupted after it is done like many other threads i have readed. Sometimes it's changing the title of a movie or editing the season and episode number of a TV show ect.....

Yup same here
I am running the latest iTunes, the latest updates to the OS and on an iMac 3.4GHz Quad core i7 with 8GB of RAM and the music stored on local HDD.
Still locks up iTunes for between 2 minutes up to 20 minutes.
Really annoying.
If you find a fix please, please let me know, I have just been throwing hardware at it with no joy at all

Badi or user-exit for QA32 after save

I need a badi or user exit to execute exactly after save in QA32 ..I tried belows but they are not that i want
QPL1_SUBSCREEN_ADDON
INSPECTIONLOT_UPDATE
Check these Exits:
QEVA0004 Exit for changing information line in usage decision he
QEVA0005 User subscreen for displaying add. data for usage decis
QEVA0006 Entry to usage decision transactions
QEVA0007 UD: Control of compulsory comment or long text presetti
QEVA0008 Usage decision: Customer function key (e.g. to cancel U
QEVA0009 UD: Predefinition of quantity to be posted to sample st
QEVA0010 UD: Usage decision check
QLCO0001 QM: Call alternative costs report from UD
QSS10001 Possibility of calling a different print report

Hello Tuncer,
have you checked the BADI QE_SAVE? This is the last possible chance of changing data on saving a QM transaction and should be active in QA32.
The only other solution I can come up with is a follow-up action i.e. for the UD-code
Hope this information proves usefull.
Regards
Isabelle

Auto po creation after save sales order.

Hi, Experts,
A s per my business requirement, We have mapped configuratin for auto PR creation at a time of order if stock not available, But system not create automatic PO after save sales order. I want to crate Automatic PO after save sales order, it is possible i know , But for that which type for configuration require i don't know, can anybody give me solution for this issue.
Thankls a lot in advance,
Regards:
Happy

Hi,
It's possible to create PO automatically after sales order is saved.
1. Set up back-to-back, i.e. PR can be automatically created after the SO is saved.
2. Item category - make sure 'Create PO automatically' checkbox is ticked.
3. Enterprise Structure --> Sales Organization - ensure that PO type, purchasing group etc. is maintained.
4. Transaction code SWETYPV - Ensure that both checkboxes are ticked for BO (object category), BUS2032 (object type), ALECREATEE/CHANGED and ERRORCHANGINGPURORD/ERRORCREATINGPURORD.
5. Optional: You could execute BD86 to check for consistencies (note that you can still get it work even if BD86 shows errors)
Regards,
HweeLing

Hard drive is corrupt after i repair it

My hard drive reads corrupt after I repair it. I restart it, hit C, and open it with a startup disk, then repair and restart it. After a while, when I verify my disk, it says that is corrupt, AGAIN!!
Please help
I'm running a mac pro dual core 2 2.66 intel xeon processor, with 16GB of memory My operating system is 10.6,8

So you should have already made a couple backups, always have a spare bootable system drive, and in some cases zero it all - takes couple hours, and not use it except as spare extra backup.
Getting files off your drive now but don't use it,, install OS to a new drive (pull the old one in fact temporary) and you may want to use checksum on all file copies, and for any files not on backup sets try best you can and if you still need help, then turn to Data Rescue 3.
I would not use a DVD to do repairs, even if it is 10.6.0 or 10.6.3. I would use a clean small system drive with 10.6.8 (takes less than 30GB, even down to 16GB if careful) "emergency boot drive" used only for system maintenance and repairs.
And if you had Lion, you don't, but, I would use Recovery Mode AND have that also cloned to another drive, using Carbon Copy Cloner (CCC).

OS X partition becomes corrupt after switching from Bootcamp

So I've had to reinstall os x 10.9.1 no less than three times this week and multiple times before in the past after switching between os x and windows 8.1. This usually happens after I've been using windows for a prolonged period then switch back to os x but it happened today after reinstalling os x from a time machine backup just yesterday. I'll switch between the two and os x becomes corrupt and begins the loading bar sequence after selecting the os x partition via the refit boot manager. I tried repairing the partition using disk utility from the repair partition and an external installation of os x 10.9.1 but every time the disk becomes corrupt and needs to be wiped and reinstalled or install a time machine backup. I've lost count of how many times I've had to do this and to make things even worse both of my external disks have become corrupt after being disconnected for two days while I sort this mess out. Does anyone else have similar issues or can locate an issue somewhere?

Yeah I reinstalled osx 10.9.1 and installed all my apps, put everything back then used bootcamp to create a partition for windows then used wineclone to install my windows 8.1 backup. I jumped from windows > osx > windows > osx inside an hour to move around a few things and I forgot verify bootcamp after I installed the backup and that last time I booted to osx it was corrupted. I used disk utility from my external installation and the recovery partition and both times they need repaired which only came up with the backup and wipe notification window. There have been two occasions where I was able to fix the osx partition from my external osx installation and continue using osx quite perfectly but usually the partition becomes un-mountable after it fails to repair. Usually when this has happened the twenty something times before it's after a prolonged period of a few weeks using windows.
I'm using refit boot manager and paragon NTFS 11 which may be the only software I've installed that could be corrupting the boot.
SMART status is verified

Lightroom 5 file edited in photoshop cc 2014 does not appear back next to original after save. Is anyone else having this issue? If so what is the fix. The edited image appears back in lightroom in a new folder.

Lightroom 5 file edited in photoshop cc 2014 does not appear back next to original after save. Is anyone else having this issue? If so what is the fix. The edited image appears back in lightroom in a new folder.

I'm performing a normal "Save", not "Save As". Work flow I'm using is as follows: Select photo in Lightroom 5.7 >" Edit In" Photoshop CC 2014 > (after working on photo is PS) > Save > close PS. Photo returns to Lightroom 5.7 in a new folder rather than next to the original. Prior to purchasing the monthly plan and upgrading to PS CC 2014, I performed this same work flow using Lightroom 5.6 and Photoshop CS6 without any issues.
Just for fun... I attempted to move the edited file back into the original folder. I received a prompt that said the file already existed in the original folder, however I can't see it except the new folder that LR created. I tried several different sort orders, etc without any success.
*** Follow up: Was unable to resolve the issue using Photoshop CC 2014. Uninstalled PS CC 2014 and went back to using Photoshop CS6. Return trips from LR 5.7 to Photoshop is now performing as it should: returning edited photo back to the original folder in LR 5 and placing next to the original image.
Should anyone have a suggestion on getting Photoshop CC 2014 to do the same, I would love to be educated.
Thanks for the help, dj_paige.

How to get the only the changed or newly added entries in AFTER SAVE.

I have created table maintenance generated for a table,I want to get the newly added or changed entries while saving thats why im using AFTER SAVE event for the same,can anyone please tell me how to get the only the changed or newly added entries in AFTER SAVE.

Hi,
Welcome you post on the forum.
I have moved your thread here because it is in English and should not in the language specific forum. What is your system version?
Thanks,
Gordon

Premiere pro cc losing audio after save and close

Though I can see the wave form, audio won't play back after save, close and reopening of project. Not every file is affected. If I reimport track, audio will work again, but this is causing me to lose TONS of editing work when I have to start over again and then I'm afraid to close project.
Any ideas?

I am having this same issue in PPro CC. I am editing multi-source material from interviews that were 2-3 hours long. The audio was recorded separately and the wave files ran the entire length of the interview. 44100kHz, 16-bit wav files. It happens after I reopen the project to only some (5%?) of the audio files I imported into the project, not all.
When I re-open the project, the audio data within the wav file will shift forward, so that the back end of the clip will show green/grey diagonal striping signifying the deadspace left when the audio data shifted forward. This is only visible when the entire file is in a sequence. In sequences where it is just a clip from the *shifted* file, the clip will either play dead space if the clip is from the end of the *shifted* file or audio from the wrong part of the file since it's time reference is shifted. The only work around is to import the file again and re-cut, but its killing my work flows. I'm editing 56 interviews, each of 2-3 hours and I can't waste time re-cutting my deliverables each time there's an a revision.

Web Service do not work after save in Designer ES2 SP1

Dear all,
I am trying to migrate 8.2.1 process to ES2.
Although it have some bugs, but the process are working fine when using ES2 without any SP.
One day we installed SP1 for ES2 and hopeing for some bugs we found fixed, but find none of them fixed... oh well, so we continue the migration.
And the problem happen when we try to modify the form for some testing, we find that even we *did not* modify anything in the form, if we pressed the save button and deploy the form, all the web service related code in the form will stop working.
Anyone have any idea about this?
Thanks in advance.
Regards
Bill

Hi Paul,
Thanks for the suggestion.
Already tried to update the dataconnection by right click at data view, and choice "Refresh Data View", but that doesn't help, would like to know are there any others way to do so?
I already open a case with the support, but it seem that the engineer in APAC region have a very slow response time...
Just wonder if I can send the case to others support center with better response time.
I tried to compare the form before and after save and find that some information may missing in the post-SP1 form.
In the pre-SP1 from, I can find a <dd:dataDescription> section for every web service used in the form, but in the post-SP1 form they are missing.
I tried to add that section back and it will make the web service usable again, but the problem is I need to do that every times I modify anything, and I also need to create this section for a every new web service added to the form...
Regards
Bill

Status is not updated after Save in the transaction but after closing and

Hi
In CRM GUI and PCUI,
1) Opening a transaction (say an Invoice)
2) Changing the status from 'Open' to 'Completed'.
3) Save it
4) after save, the status shows as 'Open' (but it should show as completed) but if we come out of the transaction and come again to the same transaction, we can see now that it is in completed status.
Is there any thing to be checked or SAP usually works like this?
As whenever an user change the status from open to completed, an follow up activity is created, since here the user see the open status again in the same transatcion (after saving), he/she again change the status from open to completed and save.. so it now creates two follow-up activity..
Please help.

HI
i had similar issue when I planned callback after saving document (function module with commit was doing sth).
This commit caused that status displayed on my document was previous not actual. When entering document again status was ok.
So check if there are any function modules with commit launched after you save document (of course I do not mean standard commit for saved document).
Regards
Radek

Corrupted after SaveAs

Similar Messages

Maybe you are looking for