Table skips to second page when full

Hi,
I have a couple tables inside of subforms in my pdf. When the last table in the attached .pdf, 11. DESCRIPTION gets full enough, the cell under 11. DESCRIPTION, skips to the second page. I just want the extra text that won't fit on page 1 to skip to page 2, not all of the text. It should create as many pages as the text needs to fill. It doesn't seem to create the pages as needed.
Can someone help me out?
I've attached the file.

within your hierarchy window, select your table. now in your object window, in the table tab, select 'allow page breaks within content'. that should get you where you want to go. it will probably break at the affected row though. if you want the individual row to break then the table must be allowed to break before you can allow the row to break. follow? have fun.
rpeterson

Similar Messages

Application cannot connect to second page when oracle is used as database.

Hi,
I have an application which works on MySql database. But now I need to change the database to oracle. I have installed everything required inorder for the oracle to work. I am using active record store for my application. For that I have created sessions table using
rake db:sessions:create
And I have migrated to my database using
rake db:migrate.
Then I uncommented the following line in environment.rb:
config.action_controller.session_store = :active_record_store
Then If I start my application using IE, First page is shown, when I click on the second page link,
I got HTTP 500 Internal Server Error saying
The website cannot display the page
HTTP 500
Most likely causes:
The website is under maintenance.
The website has a programming error.
What you can try:
Refresh the page.
Go back to the previous page.
More information
I am unable to understand what the problem is. When I comment the line config.action_controller.session_store = :active_record_store application works, but the sessions table is not updated. when I use MySql as my database, everything works fine.
Can someone please help me with the solution? what may be the mistake am doing?

Please provide more information about this issue.
Are you using oracle_enhanced adapter? (activerecord-oracle_enhanced-gem)
Which Rails version are you using?
Can you look in your log file what exception you are getting? (if running in development mode then it should be in log/development.log)
Raimonds

How can I to dissapear the second page when I select a radio buttom YES or NO.

I want the second page to disappears when I select radio buttom YES or NO.
If I select YES, the second page continues, but if I press NO, the second page should dissapears, including the footer of the Master Page.
Please let me know on how to do this, thank you!
Alexander

Thank you MTremblay-Savard, I will try to figured out the exact syntax for this one.
I really appreciated your help!

Printer skipping every second page!

On my Deskjet F380, when printing the pages of a manual from a CD, onto double-sided paper, I opted to print the odd pages first. It then printed pages 1, 5, 9, etc. Same missing pages when printing even numbers. Any suggestions please.

I'm having a similar problem with a Deskjet 2050 All-in-One J510 series. For two sided printing, I want to print first the odd number of pages so that page #1 is the last page printed, I have to select "front to back". (OK, that's backwards from my previous HP printer but it's what works). Then I want to print the even pages on the back sides of the odd pages. So I insert the printed pages and select "print even pages". The printer then prints pages 2, 6, 10, etc. So to work around this glitch, I have to print the even pages one page at a time. BUMMER!! I have tried everything I can think of including reinstalling the software. I conclude that the problem must be corruption of the software on the CD. Apparently this doesn't seem to be a common problem but it has effected the software on three different printers. It seems strange that there have been only three posts on the problem in the last three years but no offered solutions.

Blank second page when printing duplex (HP8600)

When I click print for duplex printing, the 2nd page prints blank. (HP8600)
If I print a 3 page document, page 2 is blank. The first sheet should include pages 1 and 2 (front and back) and the second sheet should include page 3 (front only). It prints sheet 1 (front only) and sheet 2 (front and back).
I verified in print preview that there is no blank page in my document. They are continuous. Can anyone halp me please?
Also, I notieced that my Adobe pdf docs are printing backwards...page 4,3,2,1 instead of pages 1,2,3,4.

There should be a setting (collated, last page first, or something like that) you need to change to have it come out the way you want.
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

Tables pop to second page

I can not get my table to stay on the first page of its section (page 3 in the example picture). Whenever I put content into it it pops to the next page (page 4). Is there a solution for this?

Thanks, Tracy E!
Your tip actually worked well, after some digging with selections.
So trying to uncheck this setting was interesting. I was able to select paragraphs before, the table, paragraphs behind, and uncheck the boxes you mentioned. No sucess. I then used "Select All" for th while document and somewhere "Prevent Window and Orphane Lines" was still on. After unchecking in this instance as well, the table now breaks correctly.
Interesting that this setting now exists in this fashion. I'm not sure if this makes sense to find in the "text - format" controls only. I would have liked that for table-formats as well, especially since it is not clear if the setting pertains to complete rows or also paragraphs and lines inside a cell. Will try that some time...
And I still call this a bug, at least for the faulty import of older versions. I cannot tell if my older document had been created in Pages '09 or some earlier 5.x version; whatever was the latest version in 10.9.3 back then.
Thanks again

HP Laserjet Pro 200 color MFP skipping even pages when scanning

my scanner skips ever other page when scanning. noticed other posts regarding a different model and wondering if there is a fix out there for the Laserjet Pro 200 MFP??? Please and Thank you!!

Hi jbogda,
I see by your post that the printer skips every other page when scanning. I can help you.
Do you have the Laserjet Pro M276 printer?
How Do I Find My Model Number or Product Number?
I believe that you are scanning from the ADF, multiple pages and the feeder isn't pulling in the pages properly. Please clarify if I am incorrect.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
I have provided a document with some steps to try to see if that will resolve the issue.
'Document feeder mispick' Message Displays on the Control Panel and the ADF Does Not Pick Up Paper o... Disregard the title.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Exposing the header info on the second page

Hello, I need help exposing the header information on the second page when the child IO component has more records on the succeeding second page. I have tried looked up the bookshelf and didn't find info on how to get this done. Can anyone please help?
I have the XML data file and the RTF template when needed.
Thank you

can you send me your template and xml . i can try at my side . email: [email protected]

Problem in printing boxes in second page

Hi all,
I have created a form to display item information.i have designed a table with box command in main window of the first page. In this table it has to print the item data.upto this thing its ok. Now suppose if the item data extends to second page main window, then there also it has to print the item data along with the table.But in second page the table is not coming. Anybody pls help me out regarding this....
Thanks & Regards.
Laxman.P
B'lore

hi laxman,
plz check that u have copied the main page in to the secound page.
if u does'nt do this thing then
place u'r mouse pointer on the first page and copy it and then past it it will create a new poge,
then u can remove the contents u dont want to print on the next page , or u can also add any thing new on the next page
i hope this will solve your problem.
buy
aashi...

PS CS6 13.0 x64 prints two pages when one copy is set.

I have an image that when I print it, to a printer or to PDF generates two pages of the same thing when only one copy is selected.
The Layer> merge layers, merge visible and flatten are all greyed out so it looks like only one layer is there.
I'm on a MacBook (not Pro) Core2 duo circa 2008 running 10.8 and haven't any idea how to make it print only one page from within PS.
About all I can propose to get past this is to print to PDF, delete the extra page then print it from Preview or Acrobat, but I'd like to know how to stop Photoshop from doing what it's doing in the first place.
Any ideas out there? What other info do you need?

It might have something to do with the print menu which always says Range: page 1 to page 2, even though there is only one page worth printing. It's quite illogical to print a second page when only one is there. If I wanted two pages of the same thing that's what copies are for.
As near as I can tell, a range would only be used for an image that doesn't fit on one page. My image is less than 5cm high and less than that wide. (It's the same size as the lit apple logo on the lid of my Mac, which is what the image is of.)
I tried setting and saving the default from range to single, but even then it prints two pages of the same thing both to a physical printer and a PDF file, and when I next print the range is back to page 1 to page 2. This is all without even exiting PS. Do I have to restart PS for the default to take effect?
Why can't I save a default? Is this a directory permission thing, and why don't I get an error that they can't be saved if permissions are the reason?

How to create a second page?

Hi. I want to create a second page and then call it from code and maybe with some transition effects when it is made current. Can you show me how? Thanks

Hi,If you need to create second page in your project then select project right click and add new item .
If you need to go second page when press click btn in Main/first page use-
NavigationService.Navigate(new Uri("/SecondPage.xaml", UriKind.Relative));If you need to transition effects when it is made current find following link for helpful-http://www.geekchamp.com/articles/windows-phone-7-navigation-transitions-step-by-step-guidehttp://stackoverflow.com/questions/13440133/windows-phone-8-how-to-animate-page-navigationhttp://stackoverflow.com/questions/17021854/page-turning-transitions-for-windows-phone-8-appsDon't forget to mark the right answer and vote up if helps you.

Header row in a table is overlapping when it goes to the second page

Hello,
I have a header row in a table that I need to repeat on new pages if there is enough data to make it go to a new page. It is repeating on the second page, but when it does it all overlaps and is squashed to the left. It is 5 columns long and each column goes on top of the others to the left.
I am hoping someone might be able to help.
Thanks!

Hi,
I am facing the same issue.
My table header has 2-3 rows of data...the data is populated dynamically. The text fields are set to expand, so I have to make the subforms to flowed.
As soon as I set the subforms to Flowed...evrything overlaps on the second page.
Please help.
Regards
Neha

Unwanted Blank Page When Table At Bottom of First Page

I have an RTF template which has a table with the typical for loop as the row generator and a totals row after that. There are no line breaks after the table, and the table's paragraph is set to single line spacing with 0 pt spacing before and after.
When the table reaches the bottom of the first page, but does NOT go onto the next page, there is a blank page at the end of the report. Any ideas on how to eliminate this?
Thanks in advance,
Kurz

I have an rtf template which is used to print output in pdf format. I have a table which has many rows which displays data for each record. In order to avoid breaking the page in between the rows of a record , i have added an outer table with single row and column and pasted the data table inside it and changed the row property of outer table to 'Allow Rows to Break Across Pages' to unchecked. It works fine only if the first record set length does not exceed a full page. IF the first record expanded to more than one page, it leaves a blank page at the very first and start the record at the second page. Can you please advise how to solve this issue. Its very URGENT please..

When ever i open a wab page in full screen it goes back to small size....

when i want to view a page in full screen, it last about 3 seconds then goes back to original size. this is when i am playing a zynga based game. this never happened before i updated to new browser. it still works good on safari, but i like firefox. hope you can guide me in a direction to resolve this.

If you need to adjust the font size on websites then look at:
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
* NoSquint - https://addons.mozilla.org/firefox/addon/2592
Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 10.0 r45
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

How do I post to a new page when the 1st page is full?

How do you create a bul. board where the posts go on a 2nd
page when the first page is filled ...and 3rd page when 2nd is
full, etc ... Maybe I can stick a wordcount in a while loop before
the CFOutPUT Tag? Is there such a variable that holds a word count
or better still, a line count?
thnx a billion, please, please help!

Check out this code-Use a cfc which will be the same for you
and then change my query for yours in the .cfm HTHs:
functions.cfc:
<cfcomponent output="yes">

<cffunction name="nextXpage" access="public"
returntype="struct" hint="Next x page function" output="No">
<cfargument name="recordcount" required="Yes" default="0"
type="numeric" hint="The total numbers of records / values">
<cfargument name="page" required="Yes" type="numeric"
default="0" hint="The page number that you are currently on. (for
example URL.page)">
<cfargument name="maxrows" required="No" type="numeric"
default="10" hint="The maximum records / values to be displayed per
page">

<cfset var nextXpage = structNew()>

<cfset nextXpage.pagecount =
CEILING(arguments.recordcount / arguments.maxrows)>

<cfset nextXpage.maxrows = arguments.maxrows>

<cfset nextXpage.currentpage = arguments.page>

<cfset nextXpage.recordcount = arguments.recordcount>

<cfif arguments.page eq 1>
<cfset nextXpage.startrow = 1>
<cfelse>
<cfset nextXpage.startrow = (arguments.page *
arguments.maxrows) - (arguments.maxrows -1)>
</cfif>


<cfif arguments.page neq nextXpage.pagecount>
<cfset nextXpage.next = true>
<cfset nextXpage.nextpage = arguments.page + 1>
<cfelse>
<cfset nextXpage.next = false>
<cfset nextXpage.nextpage = 1>
</cfif>

<cfif arguments.page eq 1>
<cfset nextXpage.previous = false>
<cfset nextXpage.previouspage = 1>
<cfelse>
<cfset nextXpage.previous = true>
<cfset nextXpage.previouspage = arguments.page - 1>
</cfif>

<cfreturn nextXpage>
</cffunction>
</cfcomponent>
Then on your output page where you have the info:
.cfm page:
<cfquery name="qrysales"
datasource="davanzo_villa.admindb" >
SELECT DISTINCT
clientinfo.Id, clientinfo.RemoteAddress, clientinfo.visit,
clientinfo.country
FROM clientinfo
order by clientinfo.Id
</cfquery>

<cfquery name="GetHits">
SELECT * FROM hit_counter
</cfquery>
<cfparam name="URL.page" default="1">

<cfset functions =
createobject("component","functions")>
<cfset nav =
functions.nextXpage(qrysales.recordcount,URL.page,15)>
<table width="792">
<h4>Total Hits: <CFOUTPUT
query="GetHits">#hit_count#</cfoutput></h4>
<h4>Total Unique Visitors:
<cfoutput>#qrySales.RecordCount#</cfoutput></h4>
</table>
<table width="792">
<tr><td>
<cfoutput>Unique Visitors: #nav.recordcount# (page
#nav.currentpage# of #nav.pagecount#)
<cfif nav.previous>
<a
href="hitcount.cfm?page=#nav.previouspage#">Previous</a>
<cfelse>
Previous
</cfif>
<cfif nav.next>
<a
href="hitcount.cfm?page=#nav.nextpage#">Next</a>
<cfelse>
Next
</cfif>
<ul>
<cfloop From = "1" To = "#nav.pagecount#" index =
"pagenumber">
<cfoutput>
<a
href="hitcount.cfm?page=#pagenumber#">#pagenumber#</a></cfoutput>
</cfloop>
</ul>
</cfoutput>
</td></tr>
</table>
<table width="792">
<tr>
<td>Date</td>
<td>Visitor Number</td>
<td>Visitor`s IP Address</td>
<td>Visitor`s Country</td>
<td>Path Taken</td>
</tr>
<cfoutput query="qrysales" startrow="#nav.startrow#"
maxrows="#nav.maxrows#">
<tr>
<td>#qrySales.visit#</td>
<td>#qrySales.id#</td>
<td>#qrySales.RemoteAddress#</td>
<td><cfif qrysales.country neq ""><a
href="country.cfm?Remote_Addr=#qrysales.RemoteAddress#">#qrySales.country#</a><cfelse><a
href="country.cfm?Remote_Addr=#qrysales.RemoteAddress#">Find
country</a></cfif></td>
<td><a href="hitpathdetails.cfm?id=#id#">See path
taken</a></td>
</tr>
</cfoutput>
</table>

Table skips to second page when full

Similar Messages

Maybe you are looking for