"Table VSEOPARENT is not in the database" after system copy to x64

Hi SDNners,
We've just completed a system copy of our SolMan 3.1 system onto a new
(Xeon x64 based) server. This system copy is part of the process of
moving SolMan 3.1 from an old server onto 64bit hardware and then
upgrading it to SolMan v4 and Oracle 10G.
Although the system appears to start properly in the MMC, we are unable
to log into the system through SAPGUI - we get a SYNTAX_ERROR window
instead of a logon screen.
I've checked the SysLog from within the MMC and noticed a number of
errors stating:
Database: Table VSEOPARENT is not in the database
Database: Table VSEOIFIMPL is not in the database
Database: Table VSEOIFCOMP is not in the database
I tried running SQL command 'select * from "SAPSOL"."VSEOPARENT"; and
it confirmed that the table didn't exist. I then ran the same command
on the source SolMan system and it showed that VSEOPARENT DID exist. I
don't understand how these VSEO* tables could have gone missing between
the source and target systems.
I've searched OSS for VSEO* and cannot find anything. Please help!
Thanks,
Arwel.

Hi Arwel,
how exactly did you copy the database to the new server?
the tables you stated are an essential part of the ABAP runtime environment, so the syntax error is surely because of these tables are missing.
Regards,
Pascal

Similar Messages

"Table VSEOPARENT is not in the database" after SolMan system copy to x64

Hi SDNners,
We've just completed a system copy of our SolMan 3.1 system onto a new
(Xeon x64 based) server. This system copy is part of the process of
moving SolMan 3.1 from an old server onto 64bit hardware and then
upgrading it to SolMan v4 and Oracle 10G.
Although the system appears to start properly in the MMC, we are unable
to log into the system through SAPGUI - we get a SYNTAX_ERROR window
instead of a logon screen.
I've checked the SysLog from within the MMC and noticed a number of
errors stating:
Database: Table VSEOPARENT is not in the database
Database: Table VSEOIFIMPL is not in the database
Database: Table VSEOIFCOMP is not in the database
I tried running SQL command 'select * from "SAPSOL"."VSEOPARENT"; and
it confirmed that the table didn't exist. I then ran the same command
on the source SolMan system and it showed that VSEOPARENT DID exist. I
don't understand how these VSEO* tables could have gone missing between
the source and target systems.
I've searched OSS for VSEO* and cannot find anything. Please help!
Thanks,
Arwel.

We have 640 kernel, ECC 5.0 and BASIS patch 23.
For me the problem was with SAPVIEW table wasnt imported from source to target becuase SAPVIEW.STR file was 0 byte. STR files gets created in export preparation phase.
It did happen because on source side master DVD, there was no option for export preparation. I had only option for tablesplit and export db.
I did use ECC 5.0 SR2 Master DVD which had option for export preparation phase and that created SAPVIEW.STR file.
Using migration monitor I did re-export and re-import and this time all views are imported in target.
Regards,
Mamadi.

DB02 view is empty on Table and Index analyses DB2 9.7 after system copy

Dear All,
I did the Quality refresh by System copy export/import method. ECC6 on HP-UX DB29.7.
After Import Runstats status n Db02 for Table and Index analysis was empty and all value showing '-1'. Eventhough
a) all standard backgrnd job scheduled in sm36
b) Automatic runstats are enabled in db2 parameters
c) Reorgchk all scheduled periodically from db13 and already ran twice.
4) 'reorgchk update statistics on table all' was also ran on db2 level.
but Run stats staus in db02 was not getting updated. Its empty.
Please suggest.
Regards
Vinay

Hi Deepak,
Yes, that is possible (but only offline backup). But for the new features like reclaimable tablespace (to lower the high watermark)
it's better to export/import with systemcopy.
Also with systemcopy you can use index compression.
After backup and restore you can have also reclaimable tablespace, but you have to create new tablespaces
and then work with db6conv and online table move to move one tablespace online to the new one.
Best regards,
Joachim

Attachment Links are Not shown in Equipment After System Copy

We had recently a system copy from Pxx Client to Sxx Client.
On the P client we had attachments to equipment which was attached using IE02. We did a system copy but we could not find the attached links in the equipment on the S client.
The Content Server was also copied accordingly and an interface is already present between the S Client and Content Server.
Refer the screen shot to see the difference
This is source
This was in the target.
Can someone help why this difference is happening.
Thanks

If you are using ad block, ads won't be displayed.

Could not find the Database Engine startup handle.

Why can't Microsoft make software that "Just Works" any more.
This is Sooooo frustrating! I'm a developer. I want to write database software and I'd like to use SQL Server. But I can't even get the damn thing to install on a fresh Windows 8.1 installation.
MySQL - installs no problem - it just works.
Oracle - Installs no problem - It just works.
I downloaded SQL Server 2012 Express with SP1, ran the Install, took most of the defaults, and I get:
Install Failed:
The following error has occurred:
Could not find the Database Engine startup handle.
For help, click:
http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%25400x4BDAF9BA%25401306%254025
Of course, clicking on the link takes me to a non existing web page - what else? Just incompetence everywhere. This is Microsoft's own operating system yet they can't even get their own database to install while their competitors can.
How can they let this happen!
Then I googled the above error message. - Hundreds of hits and a lot of them are threads in forums and lots of civilians saying "try this try that" none of which works. Not a single Microsoft Employee to be found in any of the
discussions or answers. And this same problem has been happening since 2008! Yet Microsoft can't be bothered to fix it.
This kind of buggy software shouldn't have made it past Alpha testing.
Come on Microsoft, you just have to try harder. I can understand bugs that happen in unusual circumstances, after all I'm a developer too. But this won't even install on a clean Windows 8. It's tantamount to releasing a "Hello
World" program that crashes on startup!

Hi Bob,
If you make sure all your hardware and software requirements are met for installation of SQL Server 2012 on window 8.1 Its highly unlikely you will face issue.I can understand your situation so let me help you.As Kalman pointed can you paste output
of setup log file which was generated due to failed installation using Kalman's link.
Did you went thorugh below link
How to install SQL server on Win 8.1
Hardware and software requirements for SQL Server 2012
Please first read above links understand how it works and then proceed
Regarding startup handle error .AFAIK its because of Account with which you are trying to install SQL server somehow is not able to start it up after installation.Basically a righst issue.Can be different in some cases.Now whenever you install SQL server
alsway RK on Setup file and select run as administrator.When you reach page window where you need to select startup account for SQL Server please select NT Authority\System( or local system account) .
Details with steps
http://social.technet.microsoft.com/wiki/contents/articles/24364.sql-server-troubleshooting-could-not-find-database-engine-startup-handle-error-during-installation.aspx
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Setup problem - sql server 2014 - "could not find the database engine startup handle" - 0x851a0019

I tried to install ,deleted and re-installed several times and no help at all.
visual studio 2013 with update 2 rc and adk installed in my computer.
error code: 0x851a0019
error messege in setup: could not find the database engine startup handle
edition: Microsoft SQL Server 2014 Enterprise (Evaluation)
logs:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893607
Start time: 2014-04-03 13:53:29
End time: 2014-04-03 14:47:48
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: ARIELUBA-PC
Machine processor count: 8
OS version: Windows 8
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2012 SQLEXPRESS MSSQL11.SQLEXPRESS Database Engine Services 1033
Express Edition 11.1.3128.0 No Yes
SQL Server 2012 SQLEXPRESS MSSQL11.SQLEXPRESS SQL Server Replication 1033
Express Edition 11.1.3128.0 No Yes
SQL Server 2012 ADK MSSQL11.ADK Database Engine Services
1033 Express Edition 11.0.2100.60 No Yes
SQL Server 2012 ADK MSSQL11.ADK SQL Server Replication
1033 Express Edition 11.0.2100.60 No Yes
SQL Server 2012 LocalDB
1033 Express Edition 11.1.3412.0 No Yes
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Users\Arie Luba\Downloads\WS2012R2DC\SQLServer2014-x64-ENU\x64\setup\
Installation edition: Evaluation
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Hebrew_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: ARIELUBA-PC\Arie Luba
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME:
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_135327\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: ARIELUBA-PC\Arie Luba
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, MDS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer120
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: Hebrew_CI_AS
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: ARIELUBA-PC\Arie Luba
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_135327\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: Setup Support Files
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_135327\SystemConfigurationCheck_Report.htm
2014-04-03 14:14:28.01 Server Microsoft SQL Server 2014 - 12.0.2000.8 (X64)
Feb 20 2014 20:04:26
Copyright (c) Microsoft Corporation
Enterprise Evaluation Edition (64-bit) on Windows NT 6.3 <X64> (Build 9600: ) (Hypervisor)
2014-04-03 14:14:28.01 Server UTC adjustment: 3:00
2014-04-03 14:14:28.01 Server (c) Microsoft Corporation.
2014-04-03 14:14:28.01 Server All rights reserved.
2014-04-03 14:14:28.01 Server Server process ID is 7148.
2014-04-03 14:14:28.01 Server System Manufacturer: 'Dell Inc.', System Model: 'Inspiron N5110'.
2014-04-03 14:14:28.01 Server Authentication mode is WINDOWS-ONLY.
2014-04-03 14:14:28.01 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2014-04-03 14:14:28.01 Server The service account is 'NT Service\MSSQLSERVER'. This is an informational message; no user action is required.
2014-04-03 14:14:28.01 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
2014-04-03 14:14:28.01 Server Command Line Startup Parameters:
-s "MSSQLSERVER"
-m "SqlSetup"
-Q
-q "Hebrew_CI_AS"
-T 4022
-T 4010
-T 3659
-T 3610
-T 8015
2014-04-03 14:14:28.28 Server SQL Server detected 1 sockets with 4 cores per socket and 8 logical processors per socket, 8 total logical processors; using 8 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2014-04-03 14:14:28.28 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-04-03 14:14:28.28 Server Detected 8099 MB of RAM. This is an informational message; no user action is required.
2014-04-03 14:14:28.28 Server Using conventional memory in the memory manager.
2014-04-03 14:14:28.31 Server Default collation: SQL_Latin1_General_CP1_CI_AS (us_english 1033)
2014-04-03 14:14:28.34 Server Perfmon counters for resource governor pools and groups failed to initialize and are disabled.
2014-04-03 14:14:28.36 Server Query Store settings initialized with enabled = 1,
2014-04-03 14:14:28.36 Server The maximum number of dedicated administrator connections for this instance is '1'
2014-04-03 14:14:28.36 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2014-04-03 14:14:28.38 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-04-03 14:14:28.39 Server Database Mirroring Transport is disabled in the endpoint configuration.
2014-04-03 14:14:28.39 spid8s Warning ******************
2014-04-03 14:14:28.39 spid8s SQL Server started in single-user mode. This an informational message only. No user action is required.
2014-04-03 14:14:28.40 spid8s Starting up database 'master'.
2014-04-03 14:14:28.42 Server Software Usage Metrics is disabled.
2014-04-03 14:14:28.48 Server CLR version v4.0.30319 loaded.
2014-04-03 14:14:28.56 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2014-04-03 14:14:28.62 spid8s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2014-04-03 14:14:28.63 spid8s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2014-04-03 14:14:28.64 spid8s SQL Trace ID 1 was started by login "sa".
2014-04-03 14:14:28.64 spid8s Server name is 'ARIELUBA-PC'. This is an informational message only. No user action is required.
2014-04-03 14:14:28.65 spid16s Password policy update was successful.
2014-04-03 14:14:28.66 spid16s Error: 17190, Severity: 16, State: 1.
2014-04-03 14:14:28.66 spid16s Initializing the FallBack certificate failed with error code: 1, state: 20, error number: 0.
2014-04-03 14:14:28.66 spid16s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-04-03 14:14:28.66 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-03 14:14:28.66 spid16s TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-04-03 14:14:28.66 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-03 14:14:28.66 spid16s TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-04-03 14:14:28.66 spid16s Error: 17826, Severity: 18, State: 3.
2014-04-03 14:14:28.66 spid16s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-04-03 14:14:28.67 spid16s Error: 17120, Severity: 16, State: 1.
2014-04-03 14:14:28.67 spid16s SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
________________________________________________________________________________________________

Is it okay? (see below)
;SQL Server 2014 Configuration File
[OPTIONS]
; Specifies a Setup work flow, like INSTALL, UNINSTALL, or UPGRADE. This is a required parameter.
ACTION="Install"
; Detailed help for command line argument ROLE has not been defined yet.
ROLE="AllFeatures_WithDefaults"
; Use the /ENU parameter to install the English version of SQL Server on your localized Windows operating system.
ENU="True"
; Parameter that controls the user interface behavior. Valid values are Normal for the full UI,AutoAdvance for a simplied UI, and EnableUIOnServerCore for bypassing Server Core setup GUI block.
UIMODE="Normal"
; Setup will not display any user interface.
QUIET="False"
; Setup will display progress only, without any user interaction.
QUIETSIMPLE="False"
; Specify whether SQL Server Setup should discover and include product updates. The valid values are True and False or 1 and 0. By default SQL Server Setup will include updates that are found.
UpdateEnabled="True"
; Specify if errors can be reported to Microsoft to improve future SQL Server releases. Specify 1 or True to enable and 0 or False to disable this feature.
ERRORREPORTING="False"
; If this parameter is provided, then this computer will use Microsoft Update to check for updates.
USEMICROSOFTUPDATE="False"
; Specifies features to install, uninstall, or upgrade. The list of top-level features include SQL, AS, RS, IS, MDS, and Tools. The SQL feature will install the Database Engine, Replication, Full-Text, and Data Quality Services (DQS) server. The Tools feature
will install Management Tools, Books online components, SQL Server Data Tools, and other shared components.
FEATURES=SQLENGINE,REPLICATION,FULLTEXT,DQ,AS,RS,RS_SHP,RS_SHPWFE,DQC,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,DREPLAY_CTLR,DREPLAY_CLT,MDS
; Specify the location where SQL Server Setup will obtain product updates. The valid values are "MU" to search Microsoft Update, a valid folder path, a relative path such as .\MyUpdates or a UNC share. By default SQL Server Setup will search Microsoft Update
or a Windows Update service through the Window Server Update Services.
UpdateSource="MU"
; Displays the command line parameters usage
HELP="False"
; Specifies that the detailed Setup log should be piped to the console.
INDICATEPROGRESS="False"
; Specifies that Setup should install into WOW64. This command line argument is not supported on an IA64 or a 32-bit system.
X86="False"
; Specify the root installation directory for shared components. This directory remains unchanged after shared components are already installed.
INSTALLSHAREDDIR="C:\Program Files\Microsoft SQL Server"
; Specify the root installation directory for the WOW64 shared components. This directory remains unchanged after WOW64 shared components are already installed.
INSTALLSHAREDWOWDIR="C:\Program Files (x86)\Microsoft SQL Server"
; Specify a default or named instance. MSSQLSERVER is the default instance for non-Express editions and SQLExpress for Express editions. This parameter is required when installing the SQL Server Database Engine (SQL), Analysis Services (AS), or Reporting Services
(RS).
INSTANCENAME="MSSQLSERVER"
; Specify that SQL Server feature usage data can be collected and sent to Microsoft. Specify 1 or True to enable and 0 or False to disable this feature.
SQMREPORTING="False"
; Specify the Instance ID for the SQL Server features you have specified. SQL Server directory structure, registry structure, and service names will incorporate the instance ID of the SQL Server instance.
INSTANCEID="MSSQLSERVER"
; The computer name that the client communicates with for the Distributed Replay Controller service.
CLTCTLRNAME="SQLDRC"
; The Windows account(s) used to grant permission to the Distributed Replay Controller service.
CTLRUSERS="ARIELUBA-PC\Arie Luba"
; The account used by the Distributed Replay Controller service.
CTLRSVCACCOUNT="NT Service\SQL Server Distributed Replay Controller"
; The startup type for the Distributed Replay Controller service.
CTLRSTARTUPTYPE="Manual"
; The account used by the Distributed Replay Client service.
CLTSVCACCOUNT="NT Service\SQL Server Distributed Replay Client"
; The startup type for the Distributed Replay Client service.
CLTSTARTUPTYPE="Manual"
; The result directory for the Distributed Replay Client service.
CLTRESULTDIR="C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir"
; The working directory for the Distributed Replay Client service.
CLTWORKINGDIR="C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir"
; RSInputSettings_RSInstallMode_Description
RSINSTALLMODE="DefaultNativeMode"
; RSInputSettings_RSInstallMode_Description
RSSHPINSTALLMODE="SharePointFilesOnlyMode"
; Specify the installation directory.
INSTANCEDIR="C:\Program Files\Microsoft SQL Server"
; Agent account name
AGTSVCACCOUNT="NT Service\SQLSERVERAGENT"
; Auto-start service after installation.
AGTSVCSTARTUPTYPE="Manual"
; Startup type for Integration Services.
ISSVCSTARTUPTYPE="Automatic"
; Account for Integration Services: Domain\User or system account.
ISSVCACCOUNT="NT Service\MsDtsServer120"
; The name of the account that the Analysis Services service runs under.
ASSVCACCOUNT="NT Service\MSSQLServerOLAPService"
; Controls the service startup type setting after the service has been created.
ASSVCSTARTUPTYPE="Automatic"
; The collation to be used by Analysis Services.
ASCOLLATION="Hebrew_CI_AS"
; The location for the Analysis Services data files.
ASDATADIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Data"
; The location for the Analysis Services log files.
ASLOGDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Log"
; The location for the Analysis Services backup files.
ASBACKUPDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Backup"
; The location for the Analysis Services temporary files.
ASTEMPDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Temp"
; The location for the Analysis Services configuration files.
ASCONFIGDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Config"
; Specifies whether or not the MSOLAP provider is allowed to run in process.
ASPROVIDERMSOLAP="1"
; Specifies the list of administrator accounts that need to be provisioned.
ASSYSADMINACCOUNTS="ARIELUBA-PC\Arie Luba"
; Specifies the server mode of the Analysis Services instance. Valid values are MULTIDIMENSIONAL and TABULAR. The default value is MULTIDIMENSIONAL.
ASSERVERMODE="MULTIDIMENSIONAL"
; CM brick TCP communication port
COMMFABRICPORT="0"
; How matrix will use private networks
COMMFABRICNETWORKLEVEL="0"
; How inter brick communication will be protected
COMMFABRICENCRYPTION="0"
; TCP port used by the CM brick
MATRIXCMBRICKCOMMPORT="0"
; Startup type for the SQL Server service.
SQLSVCSTARTUPTYPE="Automatic"
; Level to enable FILESTREAM feature at (0, 1, 2 or 3).
FILESTREAMLEVEL="0"
; Set to "1" to enable RANU for SQL Server Express.
ENABLERANU="False"
; Specifies a Windows collation or an SQL collation to use for the Database Engine.
SQLCOLLATION="Hebrew_CI_AS"
; Account for SQL Server service: Domain\User or system account.
SQLSVCACCOUNT="NT Service\MSSQLSERVER"
; Windows account(s) to provision as SQL Server system administrators.
SQLSYSADMINACCOUNTS="ARIELUBA-PC\Arie Luba"
; Provision current user as a Database Engine system administrator for %SQL_PRODUCT_SHORT_NAME% Express.
ADDCURRENTUSERASSQLADMIN="True"
; Specify 0 to disable or 1 to enable the TCP/IP protocol.
TCPENABLED="1"
; Specify 0 to disable or 1 to enable the Named Pipes protocol.
NPENABLED="0"
; Startup type for Browser Service.
BROWSERSVCSTARTUPTYPE="Automatic"
; Specifies which account the report server NT service should execute under. When omitted or when the value is empty string, the default built-in account for the current operating system.
; The username part of RSSVCACCOUNT is a maximum of 20 characters long and
; The domain part of RSSVCACCOUNT is a maximum of 254 characters long.
RSSVCACCOUNT="NT Service\ReportServer"
; Specifies how the startup mode of the report server NT service. When
; Manual - Service startup is manual mode (default).
; Automatic - Service startup is automatic mode.
; Disabled - Service is disabled
RSSVCSTARTUPTYPE="Automatic"
; Add description of input argument FTSVCACCOUNT
FTSVCACCOUNT="NT Service\MSSQLFDLauncher"

Table TTZDF does not exist on database

HI forum
i am installing the last SAPIDES Ehp3 Linux / Maxdb during the process of installation all job were imported sucessfully 32 of 50 , in the phase CHECK DDIC PASSWORD, the system can´t do log in.
Review the log in the work directory (dev_w0) the follow message is generated.
A Sat Jun 12 21:19:56 2010
A **GENER Trace switched off ***
B dbmyclu : info : my major identification is 3231713892, minor one 0.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my initial uuid is CF0B144C2E40F845E1000000C0A00A64.
B dbmyclu : info : current optimistic cluster level: 2
B dbmyclu : info : pessimistic reads set to 2.
C
C Sat Jun 12 21:20:15 2010
C *** ERROR =>   prepare() of C_0063, rc=1, rcSQL=-942 (POS(95) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(95) Unknown table name:TTZDF)
C sc_p=0x2b4da28435b8,no=63,idc_p=(nil),con=0,act=0,slen=190,smax=256,#vars=1,stmt=0x19449e10,table=TTZDF
C SELECT "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "TIMETO" FROM "TTZDF"
C   WHERE "CLIENT" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" WITH LOCK ISOLATION LEVEL 1;
B ***LOG BZA=> table TTZDF      does not exist on database R/3
B *** ERROR => Buffer loading failed: {fcode=293, rc=32, cnt=0, table='TTZDF'}
C *** ERROR =>   prepare() of C_0063, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28435b8,no=63,idc_p=0x2b4da2909220,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x19449e10,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF      does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:20:26 2010
C *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(95) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(95) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=(nil),con=0,act=0,slen=190,smax=256,#vars=1,stmt=0x1944e480,table=TTZDF
C SELECT "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "TIMETO" FROM "TTZDF"
C   WHERE "CLIENT" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" WITH LOCK ISOLATION LEVEL 1;
B ***LOG BZA=> table TTZDF      does not exist on database R/3
B *** ERROR => Buffer loading failed: {fcode=293, rc=32, cnt=0, table='TTZDF'}
C *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF      does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:20:28 2010
C *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF      does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:20:30 2010
C *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF      does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:20:31 2010
C *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF      does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:21:18 2010
C *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF      does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:21:21 2010
C *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF      does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:21:29 2010
C *** ERROR =>   prepare() of C_0066, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da2843780,no=66,idc_p=0x2b4da29093e8,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x194421a0,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF      does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
M ***LOG R47=> ThResFree, delete (001024) .
I search notes and in sdn forum any information about this error, but there isn´t information.
How i can solve this inconsistence durant the installation for finish the SAP IDES installation.
Hi forums
cheking the process of the installation, the problem i wait have it solve doing the reinstallation with any adjust in the database release .. i will be comment the process to the solution.
Jairo

thie process was solved with a new installation-

SQL Server Express 2014 on Win8.1: Could not find the Database Engine startup handle

Hello,
I tried to follow all the similarly titled posts in this forum, yet no solution seems to work, so I hope I can find some up-to-date suggestion here (most of the older posts refer to versions from 2008 to 2012...).
I have installed Visual Studio 2013 (with the latest Update 2 RC) on a freshly installed development workstation with Win 8.1 with all its updates. Now I'd want to install SQL Server 2014 Express, but the setup keeps failing with the dreaded "Could
not find the Database Engine startup handle" error (the log follows below).
What I tried:
1) download again and repair. Same error.
2) completely uninstall by launching setup.exe /Action=uninstall (success), then rebooting the OS, then installing again. Same error. I did this twice, the second time I also manually removed any directory left out in C:\Program Files etc.
When I launch the setup, I select all the components for installation in the package SQLEXPRADV_x64_ENU.exe (1.12 GB, last downloaded today -Apr 3, 2014-), and accept all the defaults including the proposed services accounts. There is no preexisting
SQL Server instance, as expected.
The setup takes its time, and finally fails with the error quoted above. I really do not want to reformat my HD and fully reconfigure my workstation, which took about 3 days... Could anyone suggest a solution to have SQL Server 2014 setup so I can start
developing instead of wasting time in administering the system?
Thanks to all! The log follows.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893607
Start time: 2014-04-03 18:30:58
End time: 2014-04-03 19:04:41
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: DIOMEDES
Machine processor count: 4
OS version: Windows 8
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Users\Daniele\Downloads\SQLEXPRADV_x64_ENU\x64\setup\
Installation edition: Express
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS, CONN, BC, SDK, BOL, SSMS, ADV_SSMS, LOCALDB
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQLEXPRESS
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SQLEXPRESS
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: DIOMEDES\Daniele
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_183057\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: LocalDB
Status: Passed
Feature: Setup Support Files
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_183057\SystemConfigurationCheck_Report.htm

Thank you, it worked! I suppose that it was really your nr.3 which made the difference. I changed NT Service\MSSQL$SQLEXPRESS to NT AUTHORITY\System for the Data service. I'll then change it again as suggested (any suggestion about a "standard"
account to be used here?), even if this is a development workstation using SQL Server Express only as a local database for debugging, so security is not really a big concern.
Thanks for the feedback.Ya I know No3 was real step but just added more info so as to rule out any other possibility.
No not as such, you wont believe,quite few pf my clients I have worked for keep it with local system and they have not complained yet ,they are afraid to change account as few of them faced issue SQL Server not coming online due to logon failure( after changing
startup account to some domain a and that was happening due to some AD policy.But if you have nay plans to move Critical database in production which would be act as Database to some Internet facing application please follow my suggestion
of running SQL Server with Least privileged domain account.
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Issue when installing SQL Server Express 2012 - "The requested control is not valid for this service" + "Could not find the database engine startup handle"

Good morning,
I'm experiencing the following issue when installing Microsoft SQL Server Express 2012 (with tools, SQLEXPRWT_x86_ENU.exe) on the laptop of my company;
Installation goes plain until around the end of the progress bar, it stops on the setup of
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
I've put in my SkyDrive the error log I received after the install;
I'm at full disposal if you need further information,
thank you in advance
Best regards
Francesco

Well, i just ran into this issue and the problem was lack of admin rights. It was my company's laptop so got the setup initiated by my company's IT team with admin rights. However, the upon completion of setup, i go the same error messages as stated above:
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
Also, if you open SQL Server Configuration, the status of the service is "Change Pending" and you would not be able to set the startup login type to Local Service/System/Network.
Then, I just got my account added as Local Admin and then tried to start the service and was able to.
However, I am not sure whether same was the case for you.
Please mark the answer as helpful if i have answered your query. Thanks and Regards, Kartar Rana

Process exist in apps server but not in the database

Hi all,
10.2.0.3 2 node RAC AIX
In our application server,topas command shows some PIDs consuming high CPU. But the PID when resolved to sid in the database,no rows are returned.
Which means the process does not exist in the database.
How can I know what the process is doing in application server as it has gone zombie now?
Thanks

Hi,
There are some cases when a transparent table exists in the Data Dictionary but not in the database.
1. You have just created the table and saved it. But you have not activated it.
2. There's a large amount of data in your table and you have attempted to change the key fields of the table (e.g., you are trying to delete existing key fields). This action requires you to use the database utility. During this process, the table is first physically deleted from the database and a new table is created. In the meanwhile the data from the old table is stored in a temporary table. So while the database utility is performing this operation, the table does not exist in the database for some time.
Hope this helps.
Regards,
Anand Mandalika.

LOG BZA= table PATCHHIST does not exist on database

Dear Friends,
I am installing SAP R/3 4.7 using import method and in the last step of the installation RFC logon module (post procesing) getting the error FRF-00063 RFC logon failed with invalid interface.
below is the R3trans log
4 ETW000 Connected to DBMS = DB6 --- DB2DBDFT = 'TST' --- SYSTEM = 'SPP'.
4 ETW000 [dev trc     ,00000] { db_rtab( fcode = 'RT_INSERT', tname = 'PATCHHIST' ) {saprel.c:1350}
4 ETW000                                                                             163 0.755328
4 ETW000 [dev trc     ,00000] *** ERROR in prepareStatement[dbdb6.c, 12112] CON = 0 (BEGIN)
4 ETW000                                                                            1743 0.757071
4 ETW000 [dev trc     ,00000] &+     DbSlModifyDB6( SQLExtendedPrepare ): [IBM][CLI Driver][DB2/AIX64] SQL0204N "SAPTST.PATC
HHIST" is an undefined nam
4 ETW000                                                                              32 0.757103
4 ETW000 [dev trc     ,00000] &+     e. SQLSTATE=42704
4 ETW000                                                                              19 0.757122
4 ETW000 [dev trc     ,00000] &+
4 ETW000                                                                              19 0.757141
4 ETW000 [dev trc     ,00000] &+     INSERT INTO "PATCHHIST" ( "EXECUTABLE", "SAPRELEASE", "HOSTNAME", "PLATFORM", "DBVENDOR"
, "TIMESTAMP", "PATCHNO",
4 ETW000                                                                              20 0.757161
4 ETW000 [dev trc     ,00000] &+     "DBSLPATCHN" ) VALUES( ?, ?, ?, ?, ?, ?, ?, ? )
4 ETW000                                                                              29 0.757190
4 ETW000 [dev trc     ,00000] &+       cursor type=NO_HOLD, isolation=UR, cc_release=NO, optlevel=5, degree=1, op_type=15, re
opt=0
4 ETW000                                                                              33 0.757223
4 ETW000 [dev trc     ,00000] &+       ABAP location info: '', 0
4 ETW000                                                                              30 0.757253
4 ETW000 [dev trc     ,00000] &+
4 ETW000                                                                              19 0.757272
4 ETW000 [dev trc     ,00000] &+
4 ETW000                                                                              19 0.757291
4 ETW000 [dev trc     ,00000] *** ERROR in prepareStatement[dbdb6.c, 12112] (END)
4 ETW000                                                                              28 0.757319
4 ETW000 [dbtrtab     ,03967] ***LOG BZA=>table PATCHHIST does not exist on database [dbtrtab#5 @ 3967]
4 ETW000                                                                              38 0.757357
Kindly help me in resolving the issue.
Thanks and Regards,
Seshu

Hello Seshu,
the table should be there, so maybe there was an earlier problem durint the installation.
Go to the directory containing the installation logs and search for errors, e.g.
grep -i PATCHHIST *.log
Regards,
Mark

'Not enough memory' + 'Internal error' x 'Could not render the database' = Parting of company :(

I can’t believe the amount of concern / disappointment / frustration spread across every associated Fireworks forum re: CS5’s
"An internal error occurred"
"Could not render the database"
"Not enough memory"
"Crash without notification"
Etc.,
We installed the CS5 trial – being more than wary about Adobe’s past releases – and lo and behold, all of the above beared ‘true’!
This is nothing new of course, we’ve all been experiencing this since CS3 – but hoping against hope - a newer release would solve the poor memory management and general ‘bug-ridden’ code; alas - as per usual, Adobe has not responded with any pro-solution based action, but successfully furthered our frustration with a couple of fresh gimmicks without strengthening the core software.
As an avid fan of adobe software […and a Fireworks freak] working in a design house that has many different employees with widespread software tastes – I eventually said ‘enough is enough’ after the umpteenth crash [as of 3 weeks ago] and have revisited the Rebel Alliance; ‘yes, CorelDraw’! No I’m not going to go into some tirade about how much better Corel is etc. - as it has its own strengths and weaknesses, too […but without the hourly crashes] – so to be honest, we figure the time increase in some projects due to using Corel […time is diminishing with each project’s acquired experience] are negated by the downtime of Fireworks; so far, this is holding true.
This may seem drastic, but it has been a long time coming – that is, implementing a move from our decade invested workflow to a ‘somewhat’ new schema, but due to the disappointing aforementioned, eventually principal / expenditure comparisons / sanity / lack of support all culminate to such, and if there’s no support for the competition, well – then there is ‘no’ competition; a luxury Adobe has taken for granted way too long.
I truly hope Adobe turns around and fixes their ways, until then – we’ll be supporting those that do – and hopefully along the way, just maybe, with the added funds from disgruntled adobe x-pats – the software will far exceed what I used to love and adore […how I miss macromedia]; honestly, it would be near on impossible to argue which suite was better ‘either way’ – so it may not be such a distant future. Besides, with the market-door Adobe is opening due to such poor software, the new player sniffing around the edges will be welcomed by many with open arms; I know my/our allegiance will go straight to the company with the greatest software stability and sound support, whomever that maybe.
So here’s to hoping no more, and actually doing! Very sad...

I am also getting this error message. It happens randomly. Adobe help told me to close and reopen FW and then it stopped happening. Does this sound like a good solution to anyone?

RESTORING THE DATABASE AFTER BEING EDITED OR DELETED

How to restore the database after being edited? I m using sql server 2008 R2, I've done backup with some foolish knowledge and many tables have disappeared from the database. I want to get them back. Please help me.

Do you have backup which includes data which has been edited/removed by you .If so below query might help.
use master
go
alter database db_name set single_user with rollback immediate
go
restore database db_name from disk='locaion of backup'
with replace,recovery
If you have transaction lgo backups as well please dont use above method.In such case you will need to first restore full backup with no recovery like below and then apply all transaction logs with no recovery
but the last transaction log with recovery( last trn log just before you edited)
use master
go
alter database db_name set single_user with rollback immediate
go
restore database db_name from disk='locaion of backup'
with replace,norecovery
Hope this helps
More details in below link
http://www.karaszi.com/SQLServer/info_minimizing_data_loss.asp
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Could not render the database. Not enough memory.

This seems to be a big bug in Fireworks CS4. I am building a 10 page website. I only had the opportunity to insert about 10 high quality images into the project, and then tried saving the project as a Fireworks PNG. It appeared to Save successfully, however from that point on, any object I would click on, any layer I would select a message would appear.
"Could not render the database. Not enough memory."
Has anyone seen this before? How can I fix this?
I tried doing a workaround. I tried opening the saved file from Fireworks CS3. Before opening, it displays a message about insufficient permission in the registry. I click OK, and it opens in CS3. I can finally edit the project and make changes, and save it without problems. However, even after saving in CS3, I cannot open it in CS4 without getting the error message. It is not only on my machine. I send my project to others to see if they can open it via CS4, and they can't either. They get the same message.
I attached the PNG file, this is for a school project.
Any help is most appreciated.

I'm relieved to hear that. So I trust that your images are all nice and small, file-size-wise.
Okay! I trust you have already defragged your hard drive and turned off all those nasty TSRs that eat up your RAM. Fileswapping is usually what slows my computer down.
Check for scripts that might be running wild in the background. Can't think what they might be, but if something is looping and shouldn't be, you'll end up with less free RAM to move around in.
I haven't noticed the problem with lots of layers, but I haven't been watching, either. Have you experimented with turning off the layers that you are not actually exporting? I understand the convenience in keeping all those layers in there...it's a big timesaver in editing throughout a project. If all the layers are not needed in the image export, however, turn them off temporarily. That might save some elbow room.
It sounds as if your system fits the basics, but you might check:
Windows
1GHz or faster processor
Microsoft® Windows® XP with Service Pack 2 (Service Pack 3 recommended) or Windows Vista® Home Premium, Business, Ultimate, or Enterprise with Service Pack 1 (certified for 32-bit Windows XP and Windows Vista)
512MB of RAM (1GB recommended)
1GB of available hard-disk space for installation; additional free space required during installation (cannot install on flash-based storage devices)
1,024x768 display (1,280x800 recommended) with 16-bit video card
DVD-ROM drive
Broadband Internet connection required for online services*
Mac OS
PowerPC® G5 or multicore Intel® processor
Mac OS X v10.4.11–10.5.4
512MB of RAM (1GB recommended)
1GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on flash-based storage devices)
1,024x768 display (1,280x800 recommended) with 16-bit video card
DVD-ROM drive
Broadband Internet connection required for online services*
Rather than jumping to think it's a bug, try a test with 9 layers, or 8 layers. If only 10 layers and up provide problems, file a bug/feature report or contact someone in support.
As this is a user forum, we (other users) neither speak for Adobe nor know everything about the applications from a support viewpoint, so while we're always willing to offer opinions and frequently solutions, real bugs are not in our bailiwick.
Perhaps someone with a multi-layer difficulty can chime in here.
Beth

How to disconnect from the Database after signing out in ADF

I'm using JDeveloper 10.1.3 to develop ADF and JSF applications on Oracle Database.
I'm using dynamic credentials, the user can connect to the database as the database user. So different users can be connected to the database when you check the current database connections in the V$sessions. I'm using application pool.
Upon signing out, i want to kill the Database connection associated with the application model that the user was using.
I tried both the resetState() in the DCDataControl and invalidateSessionAndRedirect() but they both perform session timeout and move the application model back to the pool together with connection so that if another session with the same username/databasename couple is opened , then it can use the same application model in the pool.
In my case, i want to disconnect and remove the Database connection from the V$sessions upon siging out.
Thanks

Hi,
Thanks for your reply,
Refering to the document "Understanding Application Module Pooling Concepts and Configuration Parameters" by Steve Muench,
If jbo.doconnectionpooling=true, then each time a user session finishes using an AM (typically at the end of each HTTP request), the AM instance disassociates itself with the JDBC connection it was using on that request and it returns it to the JDBC connection pool.
I don't want to unplug the AM from the Database connnection and move it back to the database pool when each request is finished.
I want to disconnect the Database connection and remove it from the v$session upon signing out from the application, NOT only move it back to the database pool.
I want this because i use dynamic credentials and when the user X1 signout from the application and user X2 signs in, it will NOT use the database connection that was used by X1 because the application connects as the database user. In other words, 2 database connection will be found after this scenario.
Thanks,
Amr

"Table VSEOPARENT is not in the database" after system copy to x64

Similar Messages

Maybe you are looking for