Tables for sales & purchase order data relating to delivery

hi all,
i am writing a report to download all the delivery data after the delivery is created.i have to download the sales order data & purchase order data relating to this delivery also.
i am using likp & lips table for delivery.which tables i
should use to get the sales order data & PO data for the same delivery (likp-vbeln). i.e i need the sales & purchase order related tables which has link with delivery tables like likp & lips etc.
plz advice me. it is very urgent.
any idea is highly appreaciated.
Regards
pabitra

in Addition to NM ,
in case of STO there is no Sales Order , Process will be like this
PO-->Delivery->PGI--->Billing then u have to
link
*getting the History data of the PO
        select ebeln
               ebelp
               belnr
               menge
               from ekbe
               into corresponding fields of table w_ekbe
               where ebeln eq w_lips-vgbel
                 and ebelp eq w_lips-vgpos
                 and bewtp eq 'L'.
Regards
Prabhu

Similar Messages

Table for picking PURCHASE ORDER field corresponding to accounting document

Dear All
Table for picking PURCHASE ORDER field corresponding to accounting document.
Thanks
Rahul Jain

Dear Jayram
I know that Purchase order field can be picked from BSEG table but i am not able to capture the data into it. Whenever i book a invoice through FB60 or MIRO i give the reference PO number which is not getting updated in BSEG, BSAK and other relevant tables.
Thanks
Rahul Jain

Table for open Purchase order and pending invoices for vendors

Hi,
Are there any table to know open Purchase orders and pending invoices for vendors.
Quick response will be appreciated.
Thanks & Regards

hi,
Purchase Order:
S011:(PURCH: Purch. Group Statistics)
Statistics (SSOUR)
Version (VRSIO)
Month (SPMON)
Day (SPTAG)
Week (SPWOC)
Posting Period (SPBUP)
Purchasing Org (EKORG)
Purchasing Group (EKGRP)
Vendor No (LIFNR)
S012: (PURCHIS: Purchasing Statistics)
Statistics (SSOUR)
Version (VRSIO)
Month (SPMON)
Day (SPTAG)
Week (SPWOC)
Posting Period (SPBUP)
Purchasing Org (EKORG)
Purchasing Group (EKGRP)
Material No (MATNR)
Plant (WERKS)
Info Record Category (ESOKZ)
Material Group (MATKL)
Info Record (INFNR)
Country (LAND1)
EINE: (Purchasing Info Record: Purchasing
Organization Data)
Info Record (INFNR)
Purchasing Org (EKORG)
Info Record Type (ESOKZ)
Plant (WEKS)
EKET: (Delivery Schedules)
Purchasing Doc (EBELN)
Item (EBELP)
Delivery Schedule (ETENR)
EKPO: (Purchasing Document Item)
Purchasing Doc (EBELN)
Item (EBELP)
EKKN: (Account Assignment in Purchasing
Document)
Purchasing Doc (EBELN)
Item (EBELP)
Account Assignment (ZEKKN)
EKKO: (Purchasing Document Header)
Purchasing Doc (EBELN)
EORD: (Purchasing Source List)
Material No (MATNR)
Plant (WERKS)
Source List No (ZEORD)
thx,
Ganpat

To get the table for the purchase order , Completely delivered

Hi Experts,
I need to find a table for a given purchase order no . EKKO-EBLEN ,
which shows the status of the purchase orde is completely delivered or completely invoiced.
I tried finding using the F1 help and the where used list, but couldnt..
Thanks in advance ,
Harshit Rungta

in EKPO, check for each item
- ELIKZ "Delivery completed" indicator
- EREKZ "Final invoice indicator"
Regards,
Raymond

R12 upgrade data in XLA tables for old purchase orders

Hi all,
I see that we have XLA tables in R12 for accounting and that is where we
have all the accounting information and they act a bridge between GL tables
and PO tables.
My question is what happens to old PO's that were created in 11i?
When we upgrade to R12 will the upgrade process create records
for old PO's in XLA tables?
Thanks.

Hi Cheryl,
Thank you for the reply..
It would be nice if you could illustrate with a sample code..
Thanks and Regards,
Madonna

Table for storing serial number data assigned in delivery doc

Hi,
What's the table linking the serial number with the delivery doc.
I've found VBPM but it's not working at all.
Thanks.

What is the name of the field? Is it SERNR?
You may be interested in these threads;
[Serial number|Re: Serial Number Table]
[serial number -function module|How to get serial numbers for materials in stock.]
Regards,

How to upload Purchase Order Data thru LSMW

Hi All,
I need to upload Purchase order data thru LSMW. LSMW Provides standard object method which does not suit for split valuation. But in the client place split valuation is maintained. Is there any other of option of uploading the data.
Regards,
Srivatsan

Dear Srivatsan
For Upload Purchase order Data through LSMW
Business object BUS2012 - Purchase Order
Basic type PORDCR04
Message type PORDCR
Method CREATEFROMDATA
With regards
B.Ravindranath

Updating Purchase Order data in VBKD table

Hello,
We are trying to update Purchase order data in VBKD table for Sales Order at Item level. When sales Order is created, VBKD has a default record with VBELN = 'sales order number' and Item = '00000'. We want to update BSTKD_E field with Purchase order number for VBELN= 'sales order number' and Item = '00010'.
We wrote our logic in USEREXIT_SAVE_DOCUMENT_PREPARE and USEREXIT_MOVE_FIELDS_TO_VBKD in MV50AFZZ to append new entries in XVBKD with VBELN= 'sales order number' and Item = '00010'. But in this case Sales order is not created with UPDATE TERMINATED message. We are not sure if we can append a new record in XVBKD.
        wa_xvbkd = xvbkd.
        wa_xvbkd-posnr = wa_xvbap-posnr. "00010
        wa_xvbkd-bstkd_e = vbkd-bstkd.   "PO no
        wa_xvbkd-posex_e = wa_xvbap-posnr. "Purch. order item no
        wa_xvbkd-updkz = C_I.
        APPEND wa_xvbkd TO xvbkd.
        CLEAR wa_xvbkd.
Please advice the suitable way to have a Purchase Order item level data in Sales Order.
Thanks
Rohit

Hi,
You can try these FM to update info record.
ME_DB_UPDATE_INFORECORDS
ME_UPDATE_INFORECORD
ME_UPDATE_INFORECORD_COND
ME_UPDATE_INFORECORD_PD
Check the sample code on BAPI_PO_CHANGE
http://www.sap-img.com/abap/sample-abap-code-on-bapi-po-change.htm
Regards,
Shiva Kumar

Automatic account postings (for Intercompany Purchase order and Sales order

Hi all,
I need some help related to the automatic account postings (for Intercompany Purchase order and Sales order)which i can set for the follwoing scenarios. I have looked on the forms and searched alot but not able to a single solution to solve both the pupose. if one scenario works the other doesnt. Please advise.
I have created the master data
Customer receiving--G001
Sales Org.--GXIN
Distr. Channel- 01
Division - 00
Company code receiving - G1
customer supplying- V001
company code for supplying- V1
2 different scenarios
1- Intercompany Purchase order in which a Customer receiving- G001, gets stock replenishment NB purchase order from supplying company V1- GI and GR of stock is done. Biling document for customer receiving G001 is created. But now I need a way to do the opposite side posting at the supplying customer -V001-- this I do using an Idoc which creates a Invoice receipt for creditor(supplying customer) V001.
2. Sales order-- A customer X001 of company code G1 buys stock from the company code V1. the customer G001 of company code G1 bills the customer X001, but the intercompany billing doc/ invoice is created for the customer G001 by company code V1. then now i want an automatic account posting to be created at the supplying customer V001 via idoc.
Can this be achivable via Idoc with automatic account postings.
Please let me know if it doesnt make sense. thanks to all in advance
cheers
Jasmeet

Hi all,
For the Sales order and automatic posting we have created an output type ZR4N- this is creating a batch input session which can be triggered to be processed autmatically.
For the intercompany Purchase order -from Invoice we are creating a different output RD04 (sap standard) which creates invoice receipt at the vendor side.
Rest of the settings are defined using SAP standard functionality within transaction OBCA, OBCB, OBCC, OBCD,OBCE
thanks for viwing the post
Cheers
Jasmeet

Data Migration for Open Purchase Order

Hi, All,
Is there anyone know how to Count the volume for Open Purchase Order. What's the normal strategy for the Data Migration and Cut-over stage?
My client want to know how many Open Purchase Order in the legacy system and then determine manual or automatic data migration. If manual, how to do? If automatic, how to do? Because all materials and vendors, plants are different number. How to track? How to find out to match between new and old?
Thank you very much

JC,
Sounds a bit early to be making decisions about the realization phase. It doesn't sound like you have finished the Blueprinting phase yet, much less the testing phase.
Anyhow, in my experience I typically use LSMW (Legacy system migration workbench) to load MM master data (material masters), Inventory (WIP, RM, FG, etc) Purchasing Master data (Vendors, Purchase Info Records, Source Lists, Quota Arrangements), and Purchasing transactional documents (POs, PurReqs, Scheduling Agreements, etc). Depending on the complexity and volume of data, it may be necessary to write custom programs to load the data. You will find this out during your requirements gathering.
It is uncommon but possible to load all of these data manually. I have never run across a client that wants to pay a consultant's hourly rate to sit at a terminal to peck away loading master data, so if the client intends to have his own users enter the data manually, the project manager should make provision that there will be qualified TRAINED client employees available for this data entry. I did help with a portion of a conversion once manually; of Sales Credits, but there were only about 30 SD docs to load. I did this the evening before go-live day, while I was waiting for some of my LSMW projects to complete in the background.
A good opportunity to 'practice' your data loads is right after you have completed your development and customization, and you have gotten the approval from the client to proceed from the pilot build to the full test environment. Once you have moved your workbench and customization into the client's test environment, but before integration testing, you can mass load all, or a substantial portion of your conversion data into the qual system. You can treat it like a dry run for go-live, and fine tune your processes, as well as your LSMW projects.
Yes, it is good practice to generate comparisons between legacy and SAP even if the client doesn't ask for it. For Purchase orders on the SAP side, you could use any of the standard SAP Purchasing reports, such as ME2W, ME2M, ME2C, ME2L, ME2N. If these reports do not meet the requirements of the client, you could write a query to display the loaded data, or have an ABAPer write a custom report.
You didn't ask, but you should also do comparisons of ALL loaded data - including master data.
It sounds like you are implying that the client wants YOU to extract the legacy data. For an SAP consultant, this is not very realistic (unless the legacy system is another SAP system). Most of us do not understand the workings of the myriad legacy systems. The client is usually expected to produce one or more legacy system technical experts for you to liase with. You normally negotiate with the technical expert about every facet of of the data migration. In addition, you will liase with business users, who will help you and the implementation team to logically validate that the final solution (turnkey SAP production system, fully loaded with data) will meet the client's business needs.
Finally, you mentioned how do you track the mapping of master data between legacy and SAP. There are many ways to do this. I normally try to get the legacy person do the conversion on his end, eg, when he gives you the load file, you would like to have already translated the master data and inserted the SAP relevant values into the file. If this is not possible, I usually use MS Access databases to maintain a master map, and I perform the mapping on a PC. If your data package is small, you can probably get by using MS Excel or similar.
Good Luck,
DB49

SAP Tables for Open Customer Orders and Sales History

Dear Experts.
I am looking to get SAP SD related tables for the following,
1) SAP tables for Open Customer Orders
From SAP, I need to get all tables that Contain all open customer orders for products.
2) Sales History
From SAP, I need to get all tables that contain the previous month's sales history (shipped customer orders).
Please Help!!

hi
check the following link
http://www.erpgenie.com/abap/tables_sd.htm
hope it will help you
regards,
sreelatha gullapalli

Additional field in the sales order header Purchase Order Data tab

Hi,
I want to add an additional field in the below screen:
VAO1 > Go to > Header > Purchase Order Data >
Under Sold to party section i want to add an additional field.
Is this possible through configuration?
Please let me know.
Thanks in advance
Edited by: Kase on Dec 20, 2011 7:06 AM

Hi Kase,
Check this below link it might be helpful for your issue
sales order - Additional data B
new fields in sales order
Regards
Pradeep

Report of expiry dates for framework purchase orders

Hi,
In Standard SAP is there any report of expiry dates for framework purchase orders?
Thanks & Br,
Sandeep

Hi
There is no standard report available to display the expiry dates for frame work orders.You can get the details from table EKKO and field is KDATE or U have to go for development.
regards
Ramakrishna

Purchase order data for ATP category BH and BI not retrieved

Hi Experts,
I have a requirement where I need to extract purchase orders data from the bapi BAPI_POSRVAPS_GETLIST3. I am passing the locations, products and ATP categories AG,EF,BF,BI and BH. However, my bapi works correctly for AG,EF and BF, but it does not retrieve the data for BI and BH categories.
I have debugged the bapi and found that it is unable to retrieve data from the live cache.
Can anybody please help me out and let me know the exact reason for this issue? I have checked the return table of the bapi and it does not give any error message as well.
Looking forward to your reply.
Thanks in advance.
--Warm Regards,
Prajakta K.

Hi,
BI (stock transport order) and BH (PreqRel) are demand elements for which there exist corresponding receipt element as BF (Purchase order) and AG (Preq) respectively. BAPI will give data for these categories.Thus you can get data for BI and BH from corresponding BF and AG.
Similarly EF (Dep:Preq) is receipt element and you will not get data for corresponding demand element which is available in the system as EG (Dep:ConRel).
I think BAPI is working fine.
Regards,
~Vaibhav

Billing date for a purchase order in the corresponding billing document

Hello,
for a purchase order I need to select the billing date in the bill which corresponds to the purchase order. There is a posting date in the order history but I am not sure that this date is identical with the billing date in the purchase order. Any suggestions? Thanks.
Regards, Lars.

I guess you are talking about due date for a billing document.
There's an FM Determine_Due_date for that. before that you'll have to use FM FI_DOCUMENT_READ with I_AWTYP as VBRK and I_AWREF as Billing Document Number. You will get T_BSEG entry.
CALL FUNCTION 'FI_DOCUMENT_READ'
   EXPORTING
     i_awtyp           = 'VBRK'
     i_awref           = po_vbeln
   TABLES
     t_bseg            = i_bseg
SORT i_bseg BY vbeln.
READ TABLE i_bseg WITH KEY vbeln = 'Billing Document Number'.
IF sy-subrc IS INITIAL.
    MOVE-CORRESPONDING i_bseg TO wa_faede.
    CALL FUNCTION 'DETERMINE_DUE_DATE'
         EXPORTING
              i_faede                    = wa_faede
         IMPORTING
              e_faede                    = wa_faede
         EXCEPTIONS
              account_type_not_supported = 1
              OTHERS                     = 2.
This wa_faede will have due date in one of its fields.
Hey do reward points if this post is helpful.

Tables for sales & purchase order data relating to delivery

Similar Messages

Maybe you are looking for