Tables tcode relation

< MODERATOR: All points have been UNASSIGNED and the message locked. Please do not share email addresses, documents, or links to copyrighted or company confidential information on these forums. If you have some information, please consider posting it to the [Wiki|https://wiki.sdn.sap.com/wiki/display/ERPFI/Home] rather than sharing via email.>
Hi morning to all
How search tables for one transaction code or i mean what is the procedure to search the tables for particular transaction code
plz help me all i will assign points ..........
Thanks
Sridevi

Hi Sridevi,
If you want a list of all the transaction codes, then you need to goto SE11 and display the table TSTC and before executing it, Leave the field "Maximum number of hits" as blank, allowing the system to display all the TCodes in SAP.
If you want to know the tables which are updated through a particular transaction code, then the procedure suggested through SE93 holds good.
If you want to check out what are all the fields available in a particular table, then goto SE11 and key in the table name and press F7. Then it shows all the fields available in the table you typed.
Please let me know if you need for any other information and reward points if useful.
Regards,
Sreekanth....

Similar Messages

What are the tcodes related to CATSDB table

what are the tcodes related to CATSDB table

Hi,
look at this:
CAT2                 Time Sheet: Maintain Times
CAT2_ISCR            CATS: Maintain Times (Init. Screen)
CAT3                 Time Sheet: Display Times
CAT3_ISCR            CATS: Display Times (Initial Screen)
CAT4                 CATS: Approve Data
CAT5                 Data Transfer CATS -> PS
CAT6                 Transfer External -> Time Management
CAT7                 CATS: Transfer Data to CO
CAT8                 Time Sheet: Document Display
CAT9                 Data Transfer CATS -> PM/CS
CATA                 Transfer to Target Components
CATC                 Time Sheet: Time Leveling
CATM                 Selection From Time Recording
CATR                 Reorganize Interface Tables
CATSARCH             Archiving Time Sheet Data
CATSWF               CATS Workflow
CATSXC               Customizing: CATS for Service Prov.
CATSXC_CHECK         Check Customizing
CATSXC_COMP_DTL      CATSXT: Maintain Component Details
CATSXT               CATS for Service Providers
CATSXT_ADMIN         CATS for Service Providers (Admin.)
CATSXT_DA            Display Work Time and Tasks
CATSXT_DTL           Work Times: Detail Display
CATS_APPR            Approve Working Times (Poweruser)
CATS_APPR_LITE       Approve Working Times
CATS_DA              Display Working Times
CATS_SELVIEW         Maintain Selection View HRCATS
CATW                 Record Working Time
Regards, Dieter

How to find Tcodes related to a particular user

How to find Tcodes related to a particular user

>
P734000 wrote:
> do we have any table to check the tcodes which were created by a particular user.
Hello,
I donot think SAP maintains this info
@Max: I think t-code you gave is the same when i use SUIM --> TRxns --> "Executable for User"
BR,
Suhas

Mix object tables with relational tables?

Hallo,
is it possible to mix object tables with relational tables in one database?
I didn't succeed in assigning a foreign key from a relational table to an object table.
Is this only working with column objects in relational tables?

Hi
is it possible to mix object tables with relational tables in one database?
Every database contains both types of tables. So, it is basically not a problem.
I didn't succeed in assigning a foreign key from a relational table to an object table.
Is this only working with column objects in relational tables?It would be interesting to know how you tried... e.g. what error you get... Here an example (executed on 11.1).
SQL> create or replace type tt as object ( n number );
2 /
SQL> create table ot of tt (constraint ot_pk primary key (n));
SQL> create table rt (n number, constraint rt_ot_fk foreign key (n) references ot (n));
SQL> insert into ot values (tt(1));
SQL> insert into rt values (1);
SQL> insert into rt values (2);
insert into rt values (2)
ERROR at line 1:
ORA-02291: integrity constraint (OPS$CHA.RT_OT_FK) violated - parent key not foundHTH
Chris

Table for relation between WIP and Production Order

Dear All,
Please provide me table having relation between Production Order Number and WIP for it.
Regards,
Sachin

http://www.sap-img.com/
Free ABAP eBook Download
SAP MM, SD, FI, PS, PP, PM, HR, System Tables
Regards,
Rajesh Banka

How to find how/if two tables are related?

Hello Frnds,
If there an FM which can tell if two tables are related so that a join can be performed on them and if yes, it can tell on which field they are related?
Regards,
Arpit

thanks,
Rich, tables will be taken as input from user as parameters and hence will be dynamic. I want to use this logic for the purpose where user wud like to know, for example, which all DEL for SO are created by same user. Now in this case I want to know if there is relation between LIKP, LIPS and VBAK. But if user wants to see which all GR were created by same user who created POs, tables will be MKPF, MSEG and EKKO.
SO what I am trying to say is tables will change as per input but I need to before before processing logic, if there any relation exsits between input table at all or not?
Regards,
Arpit

Need Tcodes related ot marketting planner

hi guys
could anyone send me Tcodes related to marketting planner

These r the transaction codes in marketing..
MARKETING PLANNING AND CAMPAIGN MANAGEMENT
CRM_MKTPL_CALENDAR -- MARKETING CALENDER
CRM_MKTPL --- MARKETING PLANNER
CRMD_EMAIL_LIST -- DISPLASY MARKETING CONTACT LIST
CRMD_IM_MAIL_DELEAT -- DELETE MARKETING CONTACT LIST
CRM_MKTPL_DEFAULTS --- MAINTAIN CUSTOMER DEFAULTS
CRM_MKTPL_USR_SEGDEF -- MAINTAIN MAPPING FOR DEFAULT                         SEGMENTS IN TRADE PROMOTIONS AND                         DEALS
CRM MKTPLPORTFOLIO -- TRANSGFER MARKETING PROJECTS TO                          MS PROJRCT
CRM_MKTPL_BW_UPDATE -- TRANSFER MARKETING PROJECT TO                         SAP BW
CRM_MKTPL_CD       -
CHANGE DOCUMENTS FOR MARKETING                         PROJECT
SCENARIO PLANNING
CRMD_MKTSC -
SCENARIO PLANNER
LEADS
CRMD_BUS2000108 --- MAINTAIN LEADS
CRMD_MKT_PROC --- CREAT TRANSACTIONS WITHOUT CAMPAIGN REFERENCE
EXTERNAL LIST MANAGEMENT
CRMD_MKTLIST_MAP -
MAINTAIN MAPPING FORMATS
CRMD_MKTLIST --- MAINTAIN EXTERNAL LISTS
CRMD_MKTLIST_CLEAR --- EXECUTE DATA CLEANSING FOR ETERNAL LISTS
SEGMENTATION
MARKETING ATTRIBUTES
CRMD_PROF_CHAR --- MAINTAIN ATTRIBUTES
CRMD_PROF_TEMPL--- MAINTAIN ATTRIBUTE SETS
CRMD_PROF_BP   --- ASSIGN ATTRIBUTE VALUES TO BP
MARKETING SEGMENTS
CRMD_MKTSEG_MGR --- MAINTAIN MASTER GROUPS
CRMD_MKTDS       --- MAINTAIN DATA SOURCES FOR SEGMENT BUILDER
CRMD_MKTSEG --- SEGMENT BUILDER
PRODUCT PROPASALS
CRMM_PPR_TOPN --- MAINTAIN TOP N PRODUCTS
CRMD_AR_MAINTAIN -- MAINTAIN CROSS/UP/DOWN-SELLING RULES
PERSONALISED MAIL
CRMD_EMAIL_TEMPL1 -- MAINTAIN MAIL TEMPLATE
CRMD_EMAIL        -- MAINTAIN MAIL FORM
CRMD_ TRANSLATE   -- TRANSLATE MAIL FROM

Any Table/Tcode to know which user did asset shutdown & on which date

Hi All
Is there any Table/Tcode to know which user did asset shutdown & on which date?
Regards
Pankaj

Hi Preeti
I guess ANLZ is not sufficient. The best method is AR15 or S_ALR_87012037 or RAAEND01.
Regards
Pankaj

Ale idocs tcode related

what is the tcode for assigning message types and inbound function module in ale
please reply me
thanks & regards,
hari priya

Hi Hari,
Steps relate to idoc
Creation of IDoc
To Create Idoc we need to follow these steps:
1)Create Segment ( WE31)
2)Create Idoc Type ( WE30)
3)Create Message Type ( WE81)
4)Assign Idoc Type to Message Type ( WE82)
Creating a Segment
a)Go to transaction code WE31
b)Enter the name for your segment type and click on the Create icon
c)Type the short text
d)Enter the variable names and data elements
e)Save it and go back
f)Go to Edit -> Set Release
g)Follow steps to create more number of segments
Create IDOC Type
a)Go to transaction code WE30
b)Enter the Object Name, select Basic type and click Create icon
c)Select the create new option and enter a description for your basic IDOC type and press enter
d)Select the IDOC Name and click Create icon
e)The system prompts us to enter a segment type and its attributes
f)Choose the appropriate values and press Enter
g)The system transfers the name of the segment type to the IDOC editor.
h)Follow these steps to add more number of segments to Parent or as Parent-child relation
i)Save it and go back
j)Go to Edit -> Set release
Create Message Type
a)Go to transaction code WE81
b)Change the details from Display mode to Change mode
c)After selection, the system will give this message The table is cross-client (see d)Help for further info). Press Enter
e)Click New Entries to create new Message Type
f)Fill details
g)Save it and go back
Assign Message Type to IDoc Type
a)Go to transaction code WE82
b)Change the details from Display mode to Change mode
c)After selection, the system will give this message The table is cross-client (see d)Help for further info). Press Enter.
e)Click New Entries to create new Message Type.
f)Fill details
g)Save it and go back
From WEDI got to Control -> Inbound process codes -> Inbound with ALE service -> Processing by function module (transaction WE42), or from WEDI go to Control -> Outbound process codes -> Outbound with ALE service -> With function module (transaction WE41). There will be function modules associated with the process codes. For inbound, the function modules usually follow this pattern: IDOC_INPUT_messagetype: for example, IDOC_INPUT_CHRMAS for inbound characteristics master.
REWARD IF USEFULL
Thanks

How to find out the Tcode related to a Script

Hi All,
Our client is using one ZFORM (on Bill Of Lading),
How to find out, In which Tcode this particular Script was used?
I have checked the TNAPR table,
It's showing the Program Name Not Tcode.
Any hint...
Thanks,
Kalyan

Hi Nehal,
In the Tcode V/G9, Output type Z013, Z016 are there for my ZFORM,
and the corresponding Program name also given.
If I made any change to the SCRIPT, how to check, whether changes are made correctly. In the Script, if I go to Utilities-> There is no print preview, there is only print option.
I am working on the CITRIX, I can't take the print locally,
It's going to Client place..
Any advice,
Thanks,
Kal Chand

Max No. of records in a table - performance related statistics of a table

Hi all,
Can anybody please help me on the performance related statistics depending upon the size of the table?
I have a question regarding the scalability and(I think so) and performance.
My record is having 20 columns and all columns together it will come upto around 200 bytes/record.
What is the maximum no of records that can be stored in a table?
Currently the table is having more than 500,000 records.
Every month, 15,000 new records are added. A new requirement came up now. If that is implemented, no. of records per month will go upto 50,000.
It means the table is getting filled up at more than three times faster every month.
How this will effect my application's performance - Querying / Inserts / Updates ?
Please help me.
thanks and regards.
Pandu

There is no inherent limit to the number of rows in a table, I have several tables with over 20 million rows (and many of these are over 200 bytes per record).
The performance impact of larger tables largely depends on how you access the tables. The size of the table will not really affect Inserts. Updates and Selects will become slower as the table increases, however, the magnitude of the impact will depend on how you access the tables. If most queries/updates go after single rows using a PK, then the impact will be minimal. If most queries/updates affect large numbers of rows using unindexed columns as selection criteria, then the impact is potentially huge.
Depending on the nature of the data, and the way it is used, you may want to investigate partioning as a way of limiting the number of rows that need to be searched for any given query/update. Even with 500,000 rows currently and 50,000 a month coming in, you probably have several months to look at it before anything drastic needs to be done.
Just make sure that you analyze the fast changing tables frequently.
HTH
John

In which table invoices related to a purchase order are stored ?

Hi all,
We need to make an ABAP program and I need to know in which table the invoices made by MIRO related to a purchase order are stored.
I can see them in the purchase order history tab in the transaccion ME23N but giving F1 and getting the table names gives me a structure table but not the actual table in SAP database. I tried the BSEG table but it doesn't store the purchase order number. Any information will be highly appreciated.
Thanks !!

Hi
You can get the Link of PUrchase order & the Invoice from Table EKBE.
You can also get the data by joining the table RBKP & RSEG, as the Purcahse order details are stored in RSEG & posting date details are stored in RBKP
Thanks & Regards
Kishore

Which table states relation between these?

HI,
I would like to know,which tables describes the best of the following case?
The table which contains relation between Sales document number and purchase document number?
Please let me know ASAP.
Regards,
Vishwakarma.

HI
GOOD
I DONT THINK THERE IS ANY TAHLE WHICH CONTAIN THE RELATION BETWEEN SALES DOCUMENT NUMBER AND PURCHASE DOCUMENT NUMBER,I YOU WANT TO ACCESS DATA FROM THESE TWO TABLES AND YOU CAN USE THE INNER JOIN STATEMENT.
THANKS
MRUTYUN

User Tables & DB Relations

Is there a way to relate a specified field in a user table to a field in a Business One table?
Edited by: Darius Heydarian on May 2, 2008 2:57 PM
Edited by: Philip Eller on May 16, 2008 8:55 AM
Edited by: Philip Eller on May 30, 2008 8:45 AM*
Edited by: Philip Eller on Jun 13, 2008 9:39 AM**

We have developed an add on that tracks specific, proprietary data in the Service Call module. We are using User Tables for "Service Call Lines".
For example:
@USR_SCL1
@USR_SCL2
@USR_SCL3
Each of these tables have a field named "U_fk_CallID".
I am trying to include some of these tables into the Tech Form of the service call. However, when I relate the U_fk_CallID field to the Service Call ID in PLD, B1 relates the two tables through:
OSCL.CallID <--> @USR_SCL1.Code
I am thinking that if I can manually set the correct relation in B1, it will relate them correctly for reporting.

How to find if an error log table is related to a table....???

Hi,
In Oracle 10g , maybe in older version too, there is the capability to create an error log table using the dbms_errlog package and create_error_log procedure...
For exaample:
exec dbms_errlog.create_error_log('EMP','EMP_ERROR')
How to find afterwards that the table EMP has a related table EMP_ERROR where errors during the inserts/updates on table EMP are registered...?????
Of course the column names in EMP_ERROR table are the same as in EMP .... but it's time consuming method to search like this way...!!!!!
SQL> exec dbms_errlog.create_error_log('EMP','EMP_ERROR');
PL/SQL procedure successfully completed
SQL> DESC EMP_ERROR;
Name            Type           Nullable Default Comments
ORA_ERR_NUMBER$ NUMBER         Y
ORA_ERR_MESG$   VARCHAR2(2000) Y
ORA_ERR_ROWID$ UROWID(4000)   Y
ORA_ERR_OPTYP$ VARCHAR2(2)    Y
ORA_ERR_TAG$    VARCHAR2(2000) Y
EMPNO VARCHAR2(4000) Y
ENAME VARCHAR2(4000) Y
JOB VARCHAR2(4000) Y
MGR VARCHAR2(4000) Y
HIREDATE VARCHAR2(4000) Y
SAL VARCHAR2(4000) Y
COMM VARCHAR2(4000) Y
DEPTNO VARCHAR2(4000) Y
SQL> DESC EMP;
Name     Type         Nullable Default Comments
EMPNO    NUMBER(4)
ENAME    VARCHAR2(10) Y
JOB      VARCHAR2(9) Y
MGR      NUMBER(4)    Y
HIREDATE DATE         Y
SAL      NUMBER(7,2) Y
COMM     NUMBER(7,2) Y
DEPTNO   NUMBER(2)    Y          Thanks...
Sim

exec dbms_errlog.create_error_log('EMP','EMP_ERROR')
How to find afterwards that the table EMP has a related table EMP_ERROR
System@Elic10> create table bla_bla (i int);
Table created.
System@Elic10> exec dbms_errlog.create_error_log('BLA_BLA', 'BLA_BLA_ERRS')
PL/SQL procedure successfully completed.
System@Elic10> select * from user_tab_comments where table_name = 'BLA_BLA_ERRS';
TABLE_NAME                     TABLE_TYPE COMMENTS
BLA_BLA_ERRS                   TABLE       DML Error Logging table for "BLA_BLA"

Tables tcode relation

Similar Messages

Maybe you are looking for