Tablespace when new users are created

Hi,
In Oracle XE 11GR2 when I create a user like below:
create user dummy_user identified by dummy_user; Here I didn't specify a default tablespace and when I look in DBA_USERS, I see that it puts it in SYSTEM tablespace.
Now I tried the same CREATE USER in Oracle Database 11GR2 EE, and if I do not specify the "Default Tablespace" there, it puts it in USERS tablespace. This also happens in Standard Edition.
Why is it different in XE ?

William Wallace wrote:
Hi,
In Oracle XE 11GR2 when I create a user like below:
create user dummy_user identified by dummy_user; Here I didn't specify a default tablespace and when I look in DBA_USERS, I see that it puts it in SYSTEM tablespace.
Now I tried the same CREATE USER in Oracle Database 11GR2 EE, and if I do not specify the "Default Tablespace" there, it puts it in USERS tablespace. This also happens in Standard Edition.
Why is it different in XE ?I don't have an XE instance handy at the moment, but you can check the default permanent tablespace using the following:
select     property_value
from       database_properties
where      property_name = 'DEFAULT_PERMANENT_TABLESPACE'You can also search for the "DEFAULT TABLESPACE Clause" as part of the "ALTER DATABASE" command in the SQL Language Reference for more information on setting this.

Similar Messages

How to programmatically set initial password when a user is created in OID

We are using the odihragent synchronization process to automatically create users in OID when an employee record is created. We would like to set the initial password for the newly created user to their last name + the last 4 digits of their SSN.
The odihragent process is successfully creating the user in OID and populates the last name and the last 4 digits of the SSN in OID. According to an open SR I have with Oracle, we cannot use the odihragent process to set the initial password because any time the employee record is updated, the synchronization process will reset the password to last name + SSN. They have recommended that we use a pl/sql plug-in to set the password using the WHEN_ADD plug-in procedure.
I am new to using OID and plug-ins and the examples provided in the Developer's Guide are limited.
I would like to know if anyone else is using plug-ins or another process to set initial passwords when a user is created? If you are using plug-ins would you be willing to share a code sample?

I am surprised that I have not received any responses... Surely there are others who are experienced with programmatically setting passwords when new users are programmatically created. Does anyone have any pointers on how to best accomplish this?

When a new user is created on the Server Computer,Why profile for the user is created as computername.username?

When a new user is created on the Server Computer,Why profile for the user is created as computername.username?

This is done if there are domain users with the same name. For example, if there is a domain user named 'test' who has logged in on the server, he will get the profile 'test'. If you then create a local user named 'test', the profile 'test' already exists
and the computer will create the profile 'computername.test'

The new event are created when i import photo in the top. Before they where put in the end. All my event are classified. Where i can set the event at the end ? Thank's.

The new event are created when i import photo in the top.
Before they where put in the end.
All my event (around 600) are classified on the top the old and a the end the new.
Where i can set the event at the end ?
Thank's.

View menu ==> sort events
LN

Db trigger that fires when new user created?

I need to set up a trigger so that whenever a new user is created in our application, user info should be inserted into an application table.
So I assumed that a trigger on CREATE DDL event will do the trick. But when I looked up trigger syntax, it asks me the schema name on which I want to define the trigger.
Is it possible to do it at all?

create or replace trigger create_user_trigger
after create on database
begin
if ora_dict_obj_type = 'USER' then
-- action
end if;
end;
/

Users are created but Roles are not Provisioned in the Target System

Hi,
It would be great if somebody would provided solution to my problem. The problem is when I try to create the Users in Identity Managment UI then the Users are created in the Target systems but the Roles are not provisioned to the Users.
In the provisioning job SetABAPRole&ProfileForUser,
It is says In the Error putNextEntry failed storing
Exception from Modify operation:com.sap.idm.ic.ToPassException: User does not exist
MSKEY 58437
Please note the When we create the User, the user is created however the Roles is not provisioned to the user.
Regards,
Hakim

Hello Nits,
since this thread is from 2010 and the OP was logged on last in 2012 (as you can see in the profile), I don't think you'll get an answer here.
Please create a new thread to explain your problem (with version and SP numbers, logs etc). You can add a link to this thread to show, that the problem is similar.
Regards,
Steffi.

Call adapter when Xellerate User is created

How can I attach an adapter when an Xellerate User is created? I see that the Add User task for Xellerate User process definition does not have any adapter attached to it. Can I just attach my adapter from the integration tab so that it will get called when the user is created in OIM ?
Previously I have attached an Task on a response code but I don't see any response codes for "Add User" task.
Edited by: DJ on Aug 16, 2011 2:16 PM

Here are the steps I performed:
1. Changed MIL data level of "Add User" to 0
2. Added a task in Xellerate User - "Create User on Target"
3. Tried to add "Add User" as precedding task in "Create User on Target" task but failed with the error.
I found this thread to which points to editing Data Object Manager on post-insert. I'm not sure which Form do I need edit, User Tasks? Users.User Defined tasks?
OIM Xellerate: how to trigger external actions from a create user event

Migration from PC with MA did not end. Had to shut down MacBookPro. After restart no new user was created. Can't find the transferred data (35 GB). Would like to delete it.

Migration from PC with MA did not end. Had to shut down MacBookPro. After restart no new user was created. Can't find the transferred data (35 GB). Would like to delete it.

iTunes is required to initially activate the phone. Back when the iPhone 3G was sold, you would take it out of the box and see a "Connect to iTunes" screen. She HAD to connect to a computer in order to begin using the phone. Does she remember what computer this was?

Can we change log_buffer parameter online e.g. when all users are working..

Hi,
Can we change log_buffer parameter online e.g. when all users are working.. ???
What is relation between redo buffer in sga and log_buffer parameter ?
SQL> show sga
Total System Global Area 3758096384 bytes
Fixed Size 1983152 bytes
Variable Size 553655632 bytes
Database Buffers 3187671040 bytes
Redo Buffers 14786560 bytes
SQL>
SQL> show parameter log_buffer
NAME TYPE VALUE
log_buffer integer 14338048
SQL>
SQL>
If the log_buffer parameter is 14 MB then why redo buffer is no as same size e.g.
14 MB
SSM

I am hoping your Oracle Consultant know what he's talking about.
According to Oracle Performance Guide,
http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14211/memory.htm#sthref654
"On most systems, sizing the log buffer larger than 1M does not provide any performance benefit. Increasing the log buffer size does not have any negative implications on performance or recoverability. It merely uses extra memory.
The best method to determine if bigger redo buffer is needed is
SELECT NAME, VALUE
FROM V$SYSSTAT
WHERE NAME = 'redo buffer allocation retries';
The value of redo buffer allocation retries should be near zero over an interval. If this value increments consistently, then processes have had to wait for space in the redo log buffer. The wait can be caused by the log buffer being too small or by checkpointing. Increase the size of the redo log buffer, if necessary, by changing the value of the initialization parameter LOG_BUFFER. The value of this parameter is expressed in bytes. Alternatively, improve the checkpointing or archiving process.
Other than that, hight log file sync event indicate you need faster disk for your redo logfiles. However, please also post your commits per second and redo per second from your AWR report.
100M redo logs might be small for your environment.

How to invalidate old sessions when new user access appl on same machine

hi all,
I am using Mozilla browser to access my web application.User one access my application using his credentials .but i left that browser open.after that I am opening the another Mozilla window and accessing my application using different credentials ex:user2 credentials .user 2 also can access my application.but when i open the first browser ..am automatically getting second user session.how can we avoid this problem.
Application is using session identifier(jSessionID) as the URL parameter for session management.
is it possible to invalidate the old session when new user access on same machine.
thanks,
Vishnu

VishnuReddy wrote:
hi all,
I am using Mozilla browser to access my web application.User one access my application using his credentials .but i left that browser open.after that I am opening the another Mozilla window and accessing my application using different credentials ex:user2 credentials .user 2 also can access my application.but when i open the first browser ..am automatically getting second user session.how can we avoid this problem.That shouldn't occur. Either you explained it the wrong way (or I interpreted it the wrong way), or there's huge bug in your login/logout logic. After opening another window inside the same session, you should still be logged in as the first user.

New users are getting "cntl_error" whenever login into the portal

Dear Experts,
New users are getting "cntl_error" whenever login into the portal. They are accessing .par application. I have read so many threads, but unable to find exact solution.
I have tried in my browser with the user login, then no error. But the user login there end then its giving "cntl_error" error.
Problem with Internet Explore Browser? Any additional setting required for users browser?
Could you please help me, how to resolve this error.
Thanks in Advance.
Regards,
Vijay.

Hi Vijay,
Check this thread - "CNTL_ERROR" raised,error key: RFC_ERROR_SYSTEM_FAILURE- Show Team Calendar , this might help you on what you are looking for.
Regards,
Sen

What users are created during Oracle Database installation?

By default, what users are created during Oracle Database installation?
Thanks,
Felipe

Hi,
All databases created by the Database Configuration Assistant (DBCA) include the SYS, SYSTEM, SYSMAN, and DBSNMP database accounts. In addition, Oracle provides several other administrative accounts. Before using these other accounts, you must unlock them and reset their passwords.
Here you are:
USERNAME
MGMT_VIEW
SYS
SYSTEM
DBSNMP
SYSMAN
SATYAM
OUTLN
MDSYS
ORDSYS
EXFSYS
DMSYS
USERNAME
WMSYS
CTXSYS
ANONYMOUS
XDB
ORDPLUGINS
SI_INFORMTN_SCHEMA
OLAPSYS
SCOTT
TSMSYS
BI
PM
USERNAME
MDDATA
IX
SH
DIP
OE
HR
Regards,
Satyam

Why is a new user account created every time I upload files from my old PC. Can't you just use the same user account all the time?

I'm a new Mac user and am finding my way slowly around it. One question: why is a new user account created every time I upload files from my old PC?

Because you're using the Migration Assistant, and it can't migrate data to an existing user account. Transfer everything at once or use a different method.
(111200)

Scrolling to next range in advanced table when new rows are added.

I programatically implemented Add New Row in an advanced table.
"Records Displayed" attribute of advanced table =10, so as log as I add upto 10 new rows the table displays 10 rows,if I add 11th record the new record is appended @ 11th position but I've to choose "Next" link on the advanced table to see the 11th row.Is it possible to show the last rowset in the advanced table when new rows are added?
The underlaying VO executes the following code when "Add New Row" button is pressed:
int rCount = this.getFetchedRowCount();
int rangeSize = this.getRangeSize();
int rangeStart = this.getRangeStart();
if (rCount < rangeSize) {
this.insertRowAtRangeIndex(rCount, newRow);
} else {
this.setRangeSize(rCount+1);
this.insertRowAtRangeIndex(rCount, newRow);
this.setCurrentRow(newRow);
To scroll to the 11-20 rows (when added more than 10 rows),I tried with following options, but none of them helped:
1) int newRangeStart = ( rCount / 10 ) * 10 ;
this.setRangeStart(newRangeStart);
2) this.scrollRange(newRangeStart);
3) this.scrollRange(rCount);
4) int newRangePage = rCount / 10;
this.scrollToRangePage(newRangePage+1);
5) this.getNextRangeSet();
Please let me if it is possible to achieve.

What happens if you just add the new row without specifying where to add it ? doesn't it add the new row on the same page as the last row ?
Thanks
Tapash

WRT160n v3 has slow connection when multiple users are connected

As of last night my router has been producing slow connectivity when multiple users are connected to it, but it's perfectly fine when only one user is connected.
I am on a laptop myself, but we also have a second laptop and a desktop where the modem and router are set up.
I have upgraded the firmware so that is up to date.
We have Comcast Fiber Optics so my internet speed is normally quite fast even when all of my computers are connected.
Some settings that I have that might help resolve the issue:
I am using DHCP Configuration.
My Channel Width is set to 20 MHz and I am using Channel 11.
The Security Mode is set to WPA Personal. I had it on WPA2 Personal but I read that changing to WPA Personal might help and so far it doesn't seem to have done anything.
I set the Beacon Interval to 50, Fragmentation Threshold to 2304, and RTS Threshold to 2304.
Everything else is set to the default factory configuration.
Just today I received a notice that said "Windows has detected an IP Address Conflict", but ever since I reinstalled the Firmware it hasn't come back. I've rebooted both my laptop and the desktop to confirm it hasn't come back as well.
I consider myself to be computer savy, but I just can't figure out what the problem is as I've tried everything that I could think of including reconfiguring my router and restarting my modem as well. This problem has presented itself in the past before but unfortunately I cannot remember what I did to fix it.

Try using inSSIDer to help you find the best channel.
http://www.metageek.net/products/inssider/
If that doesn't help, you can try disabling WMM.
Edit: You should use WPA2 AES security for best performance.

Tablespace when new users are created

Similar Messages

Maybe you are looking for