Tablix cells and tablix columns mapping

Hello,
I have lots of tablix within the report and they have many columns as well,i would like to rearrange the tablix cell height and width according to names.when i look at source code of rdl file i can see tablix columns,but i can not see which column mapped
to which cell.is there a way to do this mapping ? Let's say i have col1 in many tablix.and i would like to set 1in for every tablix cells.
Thanks.

Hi altuko,
A SQL Server Reporting Services Report Definition Language (RDL) file is validated by using an XML Schema Definition (XSD) file. When we double click .rdl file definitely it will open in XML format if we have not installed Report Builder (or it will
directly be opened with Report Builder). The XML file is correspond to the designed report. So if we want to map the tablix column and tablix cell, we should know the design surface
(To view the report in Report Designer, we can create a new report project and add the .rdl file.) and rdl xml schema definition. For example, we should know the tablix name, column name and cell name, then we can
map them in XML file.
For more information about rdl xml schema definition, please refer to the following document:
http://technet.microsoft.com/en-us/library/ms155062.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

In SSRS , after exporting report in excel,wrap text property for cell and freeze column for SSRS table header not working in Excel

I am working no one SSRS my table headers are freeze cangrow property is false and my report is working perfect while rendering data on RDL and i want same report after exporting in Excel also , i want my table header to be freeze and wrap text property
to work after exporting in my report in excel but its not working ,is there any solution ? any patch ? any other XML code for different rendering ?

Hi Amol,
According to your description, you find the wrap text property and fix column is not working after exporting into Excel. Right?
In Reporting Services, when exporting to excel file, it has limitation for textbox.
Text boxes are rendered within one Excel cell. Font size, font face, decoration, and font style are the only formatting that is supported on individual text within an Excel cell.
Excel adds a default padding of approximately 3.75 points to the left and right sides of cells. If a text box’s padding settings are less than 3.75 points and is just barely wide enough to accommodate the text, the text may wrap in Excel.
In this scenario, it supposed to be wrap text unless you merge cells. If cells are merged, word-wrap does not work correctly. If any merged cells exist on a row where a text box is rendered with the
AutoSize property, autosize will not work. For the Fix Data Property, it can't be working in Excel. These are features when exporting to Excel. We can't change it because it's by design.
Reference:
Exporting to Microsoft Excel (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Need to know base table and base column name for Oracle view columns

I am trying to load metadata for some views and that requires me to know what the final table and column name would be corresponding to the view column.
For example, if I have a view x_v that is select a,b from x_v2; and x_v2 is a view that is select a,b,c from x;
I need to get the following information.
View View Col Base Table Base Col
X_V A X A
X_V B X B
and so on.
Is it possible to get this programmatically using any SYS schema tables or Dependency tables?
I tried an indirect approach wherein I lock tables using LOCK TABLE or FOR UPDATE OF. But I'm not too sure if I can go down to the level of individual view columns.
Can you help me with this?

Thanks. I was looking at some indirect approaches.
I came up with this script that does it faster than dependencies but thats just for tables and not column mapping.
declare
cursor bt(cp_sid number) is
select u.name uname, o.name oname
from sys.obj$ o, sys.user$ u
where o.obj# in (select id1
from v$lock
where sid=cp_sid)
and u.user# =o.owner#;
cursor c_sid is
select sid
from v$session
where audsid =userenv('sessionid');
l_sid number;
l_view varchar2(100):= 'PER_PEOPLE_V';
l_schema varchar2(10):= 'APPS';
begin
open c_sid;
fetch c_sid into l_sid;
close c_sid;
dbms_output.put_line('SID: '||l_sid);
execute immediate 'lock table '||l_schema||'.'||l_view||' in row share mode nowait';
for i in bt(l_sid) loop
dbms_output.put_line(i.uname||'.'||i.oname);
execute immediate 'alter table '||i.uname||'.'||i.oname||' disable table lock';
execute immediate 'alter table '||i.uname||'.'||i.oname||' enable table lock';
end loop;
end;
It basically uses locks on views to verify locks on the base tables.
Just wondering, can we use FOR UPDATE OF statements to get to the columns?

I need to convert PDF to Excel, however, columns and tabs make many merged cells and many blank columns. In addition to not separate the columns correctly, I see many not separate lines together in the same cell. I'm even thinking that Adobe Acrobat Pro D

I need to convert PDF to Excel, however, columns and tabs make many merged cells and many blank columns. In addition to not separate the columns correctly, I see many not separate lines together in the same cell. I'm even thinking that Adobe Acrobat Pro DC has limitations. There is no way to define what points in columns to force break column? Nor create many columns that are useless? How does text to column in Excel, fixed size when we import text, and define where the breaks have columns?
Google Tradutor para empresas:Google Toolkit de tradução para appsTradutor de sitesGlobal Market Finder
Desativar tradução instantâneaSobre o Google TradutorCelularComunidadePrivacidade e TermosAjudaEnviar feedback

PDF does not contain columns, rows, formats, styles, or other aspects of word processing or spreadsheet file formats.
This is because PDF is decidedly not a word processing or spreadsheet file format or something "like" one of those.
(see ISO 32000 for what PDF "is")
What can optimize the export of PDF page content is to start with a well-formed tagged PDF (ISO 14289-1, PDF/UA-1 compliant).
Without that export is what it is and one performs whatever content cleanup is needed using the native application for the export file (MS Word or Excel).
Be well...

How can I make a drawing with forms in a column, so that it is fixed to that cell and it will be printed on that cell?

If I have made drawings with forms in a column, how can I tie it up on that cell, so it wil be printed on the right place in that column.

If I have made drawings with forms in a column,
Not sure what you mean by "drawings with forms in a column" but if you mean you have a graphical object (photo, drawing, etc.) then you can select that image, command-c to copy to the clipboard, click once in a cell, and command-v to copy. That pastes it into the background of the cell. You can then adjust the width/height of the column/row as desired to display the image. The image will then follow the cell wherever it goes.
SG

How can I select rows of cells and merge them vertically into one cell in each column?

I'm working in CS4 and need to be able to select 2 to 6 rows of cells (with many columns) in a table and then merge the selected cells vertically into one cell in each column. A few cells in the chart will not need to merge so I must select the ones that do. I have almost 100 pages of charts with cells that need merged this way by Tuesday. Please help!
Top chart example needs to change to the bottom example.
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
100
600
300
600
20000
120000
2000
500
400
50000
10000
5000
3000
200
700
67
122
600
900
100
2
7
123
1110
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
100
500
200
100
600
400
700
900
300
5000
30000
2
600
10000
67
7
20000
2000
122
123
120000
5000
600
1110

SmartCellMerge may help you:
http://www.indiscripts.com/post/2012/04/improve-the-way-you-merge-cells-in-indesign
@+
Marc

How do i copy contents of cells in a column and then paste them on another spreadsheet as a row?

HOW DO I COPY CONTENTS OF A CELL IN A COLUMN AND THEN PASTE THEM IN A ROW ON A DIFFERENT SPREADSHEET?

May you use the Numbers terminology ?
For Numbers, a spreadsheet is a document created by Numbers.
Such a document contain one or several sheets.
A sheet contain one or several tables.
A table contain one or several cells.
As you are asking about a cell, I guess that you may copy this cell
but I'm not sure of the nature of the target cell.
Is it in a table of the same document or in a table of an other document ?
Yvan KOENIG (VALLAURIS, France) mercredi 18 mai 2011 19:16:21
Please :
Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Columns, cells and row headings

My printer continues to print column headings, cells and row headings even though none of these boxes are checked under the Appleworks (6.2.9) pull down menu

Welcome to Apple Discussions
When an application stops working as it should, it's likely due to corrupt preferences. You can follow the steps in this user tip or use the reset function of Dale Gillard's Sidekick.

Hiding a tablix column conditionnaly from page to page (group member to group member)

Hi
I have the following report
              Col1   Col2    Col3
Group1
                1          2     3
                2        4      3
               3           6      6
(page break)
           Col1   Col2    Col3
Group2
                1          1      0
                1          0      0
               2           1      0
(page break)
           Col1   Col2    Col3
Group2
              3        2         1
              1       4         2
              4        6        3
In Group2 (page2) since Sum(Col3) = 0 I want to hide the column for this group (page) only
The result i need is:
              Col1   Col2    Col3
Group1
                1          2     3
                2        4      3
               3           6      6
(page break)
           Col1   Col2
Group2
                1          1
                1          0
           -----       ---          Notice there is no Col3
               2           1
(page break)
           Col1   Col2    Col3
Group2
              3        2         1
              1       4         2
              4        6        3
Is it possible ?

This can be done by using an expression in the Hidden property of the column.
For your expression you need to know what the textbox that contains the sum is called. Select it and have a look at its Name property in the Properties window to find out.
With that info, right-click the grey column header of the column that you want to hide and select
Column Visibility. In the popup select the "Show of hide based on an expression" radio button and click the fx button to enter an expression.
The expression to be entered goes like this:
=IIF(ReportItems!YourSumTextbox.Value > 0, False, True)
This will completely hide the column when the sum is not more than zero.
SQL Server MVP, MCITP/MCTS SQL Server 2008
Check out my articles at BI: Beer Intelligence

Help needed with referencing single Excel cells and formatting resulting text

In InDesign CS5 I am putting together a 20pp catalogue of about 200 products. The plan is to have the product information, SKU code, quantity etc fixed, but have the prices (there are two i.e. pack price and individual price) being linked to an Excel spreadsheet. This is so that the prices can be updated in the Excel file and the InDesign file will pull the new prices through. In case you are wondering why I don't pull the whole set of information through, this is because there are a lot of copywriting changes done to the information once it's in InDesign - it's only going to be the prices that will be updated.
I am planning on having two single cell tables in their own text frame, duly formatted with cell style, table style and paragraph style for the two price variables. This I am then going to have to repeat 200 times making sure I link to the next row down in Excel. This is going to be a hideous task but I see know way of modifying the cell in InDesign to point it to the next row in Excel. That's my first problem.
My second problem is this. In the Excel sheet, the prices are formatted as UK currency and are therefore like this...
£2.00
£0.40
£1.43
£9.99
£0.99
£0.09
What I will require is once I import that data (and refresh the data via a newly saved Excel file) is that the prices end up like this...
£2.00
40p
£1.43
£9.99
99p
9p
So if the value is lower than £1.00 it needs a trailing 'p' added and the leading zero and '£' sign stripped off. If the value is lower than £0.10 it also needs the zero after the decimal point stripping off.
Then formatting wise, the '£' sign needs to be superscripted and the same for the 'p'. This I am assuming could be done via GREP?
In summary, can anyone help with the first task of referecing the Excel cells on a cell by cell basis, given that it is the same cell column each time, but the next row down, and also point me in the right direction of the price formattting issues.
Any help will be gratefully received.

I would do this:
Create on line with the formatting.
Export as InDesign tagged text (TXT)
Read out these tags
In Excel exists a function to connect text from several cells and predfined text, there connect the content from cells with the paragraph styling tags. Do it in a seperate sheet. (Better would be to use a database like Access, there you can link your Excel sheet).
Export this sheet as txt file
Place this sheet as tagged text (there is an option in one of the sialog boxes).
In preferences < file handling you can specify that Tablecalculation Sheets and text is not embedded but linked, turn it on.

How to delete formula from cells and keep the values in Excel VBA

Hi,
In my Excel I have 15 columns. In column F which has a formula (INDEX MATCH), it has contains "RECEIVED" and "INTRANSIT". I need to filter the column F for all "RECEIVED" and then remove the formula from cells and
retain or keep the values that are already in the cells. something tricky and i'm not sure on how to work on this in Excel VBA.
Below is my initla VBA code:
I already have the codes on how to filter. kindly please help me on how to do this. thank you in advance.
Sub test_Click()
Dim wb As Workbook
Dim ws As Worksheet
Dim rng As Range
Dim lrow As Long
Set wb = ThisWorkbook
Set ws = wb.Sheets("Intransit_")
Application.ScreenUpdating = False
ws.AutoFilterMode = False
With ws
lrow = .Range("F" & Rows.Count).End(xlUp).Row
Set rng = .Range("A1:R" & lrow)
Debug.Print rng.Address
rng.AutoFilter Field:=6, Criteria1:="RECEIVED"
End With
Application.creenUpdting = True
End Sub

Solved.
Sub test_Click()
Dim wb As Workbook
Dim ws As Worksheet
Dim rng As Range
Dim lrow As Long
Dim rRec As Range
Dim btField As Byte
Set wb = ThisWorkbook
Set ws = wb.Sheets("Intransit_")
btField = 6
Application.ScreenUpdating = False
ws.AutoFilterMode = False
With ws
lrow = .Range("F" & Rows.Count).End(xlUp).Row
Set rng = .Range("A1:R" & lrow)
With rng
.AutoFilter Field:=btField, Criteria1:="RECEIVED"
On Error Resume Next
Set rRec = .SpecialCells(xlCellTypeVisible)
On Error GoTo 0
End With
.AutoFilterMode = False
If Not rRec Is Nothing Then
With rRec
.Columns(btField).Value = .Columns(6).Value
End With
End If
End With
Application.ScreenUpdating = True
End Sub

Report with non aggregated and aggregated columns from different facts.

Hi,
We have got requirement as follows,
1) We have two dimension tables, and two fact(Fact1 and Fact2) table in physical.
2) In BMM we have made hierarchies for both dimensions, and are joins both logical fact table.
3)In fact1, we are having three measures of which we have made two as aggregation sum, and one is non aggregated(It contains character).
4)Fact2 have two measures, both are aggregation as sum.
5)Now here the problem arises, we want to make a report with some columns from dim and non aggrgated column from fact1 and and aggregated column fact2
How to resolve the above issue.
Regards,
Ankit

As suggested you really want to move your none-aggregated fact attributes to a logical dimension (using the same physical table as the logical fact). Map this in the BMM layer as a snowflake, Place a hierarchy on this dimension with (at minimum) Total -> Detail levels, then on the other fact table you want to include in the report, set the content level on your other fact measures to the 'Total' level for your new logical Dim and it will allow them to be present in the same report.

I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me?

I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me? The final result would be a spreadsheet telling there were 8 people from 20 to 39 years old, 14 peolple from 40 to 59 and so on...

jpqcampos wrote:
This appears to be an 'input form' using 'Radio Buttons' to select the category. Neither of these features are supported in Numbers '09.
You can input the data on one table and summarize it on a second table, but the input table will continue to hold data for each event.
And by using the Reorganize button, you can hide all but two rows of that table to approximate the appearance and performance of an input form.
Here are the two tables, Data on the left and Summary on the right. Notes below.
The grey-filled columns in both tables are 'working' columns, and may be hidden (as shown in the image below).
Data table:
D1 contains the word "TRUE" (in capital letters). (This row is always shown.)
D2 is empty, or may contain any value except "TRUE" (This row is always hidden under the Reorganize rule.)The rest of Row 2 of this table requires the data shown: a number outside the range to be counted (999), and two checkboxes, both checked.
D3 (and filled down the rest of column D): =AND(OR(B2,C2),NOT(OR(B3,C3)))
The formula returns TRUE only for the first unused row in the table (ie. the first row for which neither checkbox has been checked)
Summary table:
Column A contains labels for the age ranges to be counted.
Column B contains the same information in the form necessary for the formulas in columns C and D. They need a numeric value, and that value must be the largest acceptable value in the range to be counted.
C2 (and filled right to column D, then both filled down to row 5):
=COUNTIFS(Data :: $A,"<="&$B,Data :: B,TRUE)-SUM(C$1:C1)
Two changes from the previous example:
COUNTIFS is used to separate the Native and Foreign counts as well as the age range to be counted.
The amount subtracted from each result is the SUM of the earlier results, and includes the text value in the first cell of the column (which is interpreted by SUM as a zero).
See note below regarding my earlier formula.
When the greyed columns are hidden and the checkbox in the Reorganize pane is checked, the two tables will appear as shown below:
Close the reorganize pane, and the 'data entry form' is ready to use.
To use, enter the age first, then check one of the boxes.
As soon as one box is checked, the row will be hidden, and the next (unused) row will be shown.
Regards,
Barry
Note regarding formula in my earlier post:
The earlier formula will give erroneous results as it subtracts only the count directly above it from its count of persons in the age range 0-n.
In E2 of that table, replace "-E1" with "-SUM(E1:E$1)
Fill down to E8.
Ignore the instructions (in that post) following "Fill down to E8."
B

Default cell values for column not properly saved in uir file in labwindows 2009 (9.1.0 427)?

I've run into a strange problem with the table control. Basically, even though I set default cell values for a particular column as numeric, when I try to add items to the list it tries to add them as strings, and returns an error message that it is expecting *char instead of int. Furthermore, when I open the uir file that contains the table in question in 2010, it appears as if the default cell values for that column are still set as strings, even though in 2009 when I open the uir file it shows as numbers. I tried converting the uir to C code, and sure enough the C code indicated that the column still is a string type.
I've gone ahead and made a small project to show the issue. If you open this project in labwindows 2009 and click on the table in the table_bug.uir, and edit default cell values for column 1, you will see that the cell settings have type as numeric and data type as int. When you run the project, however, it will fail with an error message saying that it is looking for a *char. When this same project is loaded into labwindows 2010, clicking on the table in table_bug.uir and edit default cell values (column 1) shows the type as string. When I change this to numeric (and change numeric attribute to int), this runs fine in 2010. I tried simply changing the uir in 2010, and then using it in 2009, but 2009 complains that the uir is from a newer version (understandable). If there is any workaround that would let me continue to use 2009 for the time that would be great.
Any help would be greatly appreciated.
thanks,
Alex Corwin
Solved!
Go to Solution.
Attachments:
table_bug.zip ‏324 KB

I opened the UIR in 2009 (but I have 2009 SP1) and it still showed that the default value for the first column was a string. I didn't have any problems changing it to a numeric int, and then building and running the project without error.
Here are a few things you can try:
1) Change the default value to a string. OK out of the dialog, re-enter the dialog, and change it back to Numeric int. Resave and see if the problem has gone away.
2) You said you get a ".UIR is from a newer version" error when opening the 2010 UIR in 2009. Does the UIR still open if you click okay? Often times this will work just fine. Assuming you don't have any problems with this, make a minor change to the UIR in 2009, such as moving the table to the left, and then back to the right and then re-save. See if your program works now.
Kevin B.
National Instruments

OBIEE 10g repository - Business model - logical table to physical table, column mapping is empty

Hi, I am really new to OBIEE 10g.
I already set up a SQL Server 2005 database in Physical and import a view vw_Dim_retail_branch.
The view has 3 columns: branch_id, branch_code, branch_desc.
Now I want to set up the Business model to map this physical table (view).
I created a new Business model
Added new logical table Dim_retail_branch
In the sources, added the vw_Dim_retail_branch as source table.
But in the Logical table source window, column mapping tab, it's blank. I thought it should be able to identify all the columns from vw_Dim_retail_branch, but not. The show mapped columns is ticked.
What should I do here? Manually type each column?

HI,
Just you can drag and drop the columns from physical layer to BMM layer.
Select the 3 columns and drag and drop it to the created logical column in BMM layer.
for more reference : http:\\mkashu.blogspot.com
Regards,
VG

Tablix cells and tablix columns mapping

Similar Messages

Maybe you are looking for