Tabs not aligning in cs6

Have three lines of text formatted with tabs giving 4 columns of numbers, no tab on first column which is descriptions. Text has a paragraph indent. Using soft returns to carry tab attributes through paragraph. Also using 'indent to here' character on first line. Tabs do not align. Have to insert an additional tab in place of 'insert to here' for numbers to align. Previous versions did not have this problem. Anyone else encountered this?

Judging from the tags on the original post, this is a Mac file,
Oof. Yup, that'd be a Mac file. Bowie, it might be useful to do that even though you know it's a new file - you could tell us exactly which version of CS6 you are using, e.g. 8.0.1.406
(Joel, it seems your tabs setup doesn't quite match that of Bowie.)
You're right, Tom - I would have thought that the differences were insignificant.
Either there is something that I am missing (I hammered this sample out in fifteen seconds, it's quite possible that it's still not an accurate recreation) or perhaps this issue is be platform-related. Also, I'd want to second Mike's suggestion here - is there any way you can post this file (or a file that recreates the issue without sharing any proprietary info) to something like Dropbox?

Similar Messages

Illustrator CS 6 - tabs not aligning

anyone else having an issue with tabbed text in a paragraph not aligning?

I have the same problem!
Illustrator CS6 ran fine before I installed OS X 10.10 Yosemite on my MacBook Pro. But it never ran once afterwards. When I launch AI CS6, it says it needs me to install the legacy Java SE 6 runtime. Did anyone else encounter this? I don't want to install the older version of java without knowing if it'll fix the problem, or what the impact will be to other programs which all seem to run fine after my upgrade to Yosemite. Any guidance out there for us?
Thanks a ton!
-Eric

Tab not working in CS6?

I just subscribed to CS Cloud, and I like the latest version of Dreamweaver, but I've found one little "bug."
When I do a search and replace operation, I type something into the "Find," box, then I push the Tab key to move the cursor into the "Replace" box - but it doesn't work. Instead, it highlights the "Find in" drop down box at the top. If I push Tab again, it then highlights the various options at the bottom of the Find and Replace box.
Any idea what's going on?
Thanks.

taborder within DW javascript must be acting up.
File a bug here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Problem with tab stops in InDesign CS6

Hi there.
I'm trying to align large numbers (with two stops) like
1.229
102.864
7.075
2.140.753
2.251.921
in Indesign CS6. Obviously I'd like them to align on the second dot.
After choosing OpenType > Tabular Lining from the Character Panel menu I am able to align them almost perfectly. However upon closer inspection I can see that the second dot is not aligned perfectly like it should. Why is that? Any help would be greatly appreciated!
Thanks!

Hi Donvinoth,
Sure! If you look at the examples above, I've tried three different options and settings using the Minion Pro font. Selecting "OpenType > Tabular Lining is not even necessary as I've come to learn.
Example A: a normal textbox in which I've selected all the numbers and then chosen "Align right". The numbers then align perfectly on the second dot.
Example B: a normal textbox with several columns and different tabs options. You can see which one I've used on the individual columns by the title above. Notice how the decimal option is not aligning the numbers by the second dot? The only solution to the problem is to choose the "Right-justfied Tab" in the tab options, as shown in the last column. Aparently you can't make the decimal tab align on the second dot like this in InDesign yet but perhaps they'll make it possible in another version.
Example C: I've inserted a table into a textbox and and then used different tabs options on the columns; notice how the decimal tab is working like it should in this case? In order to insert a tab in a table you need to place your curser right in front of the number and then right-click your mouse, choose Insert special character > Other > Tab. You can also choose to make the row and column stroke invisible in the table Table options if need be, which will make it look exactly like a normal textbox.
This won't work with fonts like Dosis as it's not suitable for tabular work where you want figures to line up vertically like Spier said, so you need to choose a font like Minion Pro or something similar to it.
I'm not sure if that solves your problem. If not then please attach a picture of the issue you're having and I'll try my best to help you.

Symbol isolation mode, the pixel grid is not aligned to the ruler.

If you create a symbol that is pixel perfect, exit out of the symbol and go back in, the pixels bleed into each other because the pixel grid is not aligned correctly. Instead it is aligned to the global document grid which the symbol content is not placed in. It makes no sense to align the pixel grid to the global coordinates when the content by definition is not present in it.
This makes it impossible to use symbols to edit pixel perfect objects because any editing other than the original creation does not display pixels but pixel bleeds.
This is a valid bug in Illustrator CS6. Please specify:
1. Do you understand what I am specifying? If you do not I will provide images as I wish to resolve this functionality.
2. Please specify if it has been fixed in Illustrator CC. I do not have an available Win7 installation to test CC but if it is I will acquire one.

Thank you submitted. Input from Adobe's developers or developer relations representatives on this forum to expedite a solution to this bug would be greatly appreciated. As Adobe's products are now on a subscription one would hope it's product roadmap would accelerate with regards to Illustrator considering the necessity of Vector graphics in a market with multiple largely varying resolutions.
If you create a symbol that is pixel perfect, exit out of the symbol and go into Symbol edit mode (from the Symbol Panel or when a symbol's dimensions have been modified) the Pixel Preview grid is not aligned correctly. The Pixel Preview grid is nonsensically aligned to the document's coordinates. It makes no sense to align the Pixel Preview grid to the document's coordinates in symbol edit mode as it causes an inability to see the Pixel Preview without bleeding.
This makes it impossible to use symbols to edit pixel perfect objects because any editing other than the original creation does not display pixels but pixel bleeds.
Again the fundamental issue is that: There is no reason to align the Symbol Edit mode to the global Pixel Preview grid. The Pixel Preview grid should align to the Symbol coordinates.
http://i.imgur.com/KB2CdEx.jpg
The screenshot is in Pixel Preview. Moving the contents of the Symbol in Edit mode from it's correct position to temporarily align to the Preview Pixel grid is incorrect:
1. Because you just moved the correctly placed contents. The Symbol placed in it's parent to prevent pixel bleeding is now incorrect.
2. On a subsequent edit it would be misaligned because as specified, Illustrator aligns the contents of Symbol editing mode nonsensically to the global Pixel Preview grid.
With regards to Align to Pixel grid
1. This is a bug regardless of improvements to Align to Pixel to facilitate an acceptable workflow.
2. Align to pixel grid is not an acceptable workflow:
a. Not possible to place path vertices in the middle of a pixel to facilitate pixel strokes.
b. Mangles rounded corners.
d. It is not prudent to rely on an arbitrary algorithm with regards to forward or backward compatability in creating anything, considering the possibility of mangling and/or changed behavior as specified above.
The workflow to create pixel perfect UI elements is to position vertices absolutetly.

SAPSCRIPT TABS not responding

hi guys , i have created a tab with 13 columns. column 1-7 is aligning correctly according to my specifications, column 8-13
is misaligning and not responding to my specifications. i have tried editing my values in millimeters, still no luck. i have tried increasing the width of my window, stil nochange. i really need to solve this with yo help.
my window is 193 mm width
each tab has a diff of 12mm to the next.
thanks in advance

hi nick, the fields are not aligning, i'm making a cheque which has preprinted layout so my numbers which are in words have to go into a specific layout of the check paper. The sample lay out is like below. the amounts are the ones which are mis aligning
after the 7th tab.
BILLION MILLIONS THOUSANDS
e.g ZERO | ZERO |ZERO |ZERO |ZERO |ZERO |ZERO | ZE|RO SEV|EN |ONE |EIG|HT

ICal Week view, Date is not aligned with the Time(schedule) of each date

Well, just like it says over there (`` ). I've recently been to China for a business trip, and I suppose the different time zone may have had something to do with the problem. Now I'm back home, changed the time zone back to normal, still the iCal shows in the weekly view that the Date on the above is not aligning with the Time and schedule. Any suggetions would be grateful!!!

Hi,
i omit the scheduling maergin key in material master,
the result of MRP is
BASIC DATES
Finish 15.10.2009
Start 14.10.2009
PRODUCTION DATES
15.02.2010 14:33:25
14.10.2009 07:00:00
scheduling type i planned order is still "backwards"
so in MD04 it is say that the goods is available at 15.10.2009 same with requirement dates.
this seem not right.
it seems that order finish date is not adjusted by lead time scheduling on "today scheduling".
Is there a way so order finish date is adjusted by lead time scheduling on "today scheduling" ????
Best regards,
Freddy Ha
Edited by: Freddy Halim on Oct 14, 2009 10:01 AM

Text alignment "Justify" is not aligned in Crystal Viewer.

Hi,
I am having a text field in report like paragraph format in Detail section and I have setting the text alignment as u201CJustifyu201D. If I launch the report through dhtml viewer the text is not aligned in justify format, it is getting aligned as left alignment, but it is working properly while exporting to PDF and Design Preview panel.
This problem is occurs in Crystal Report XI Release 2 and Crystal Report 2008 also.
This has been already posted and the link is Text Alignment - Justification Problem
Please help me to overcome this issue.
Thanks in Advance.

With CR 2008, make sure you are on SP4:
SP4
https://smpdl.sap-ag.de/~sapidp/012002523100008782452011E/cr2008sp4.exe
SP4 MSI
https://smpdl.sap-ag.de/~sapidp/012002523100008782532011E/cr2008sp4_redist.zip
SP4 MSM
https://smpdl.sap-ag.de/~sapidp/012002523100008782522011E/cr2008sp4_mm.zip
If that does not help, please provide a link to screen shots of the issue.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

How can I only close one tab, not two or more tabs at a time?

I would like to be able to close one tab, and go back to my email or original page, but I only get the message that I will close all tabs. I would like to be able to close one tab, and go back to the previous tab that I have open, not have to go back and sign in to my email when it should still be open. This works with Internet Explorer, why can it not work with Firefox?

The dialog Firefox displays when you click the "close window" (X) button doesn't have the option to only close the current tab. Instead, you can use one of these methods to close just the current tab:
* Click the "x" that should appear on the current tab itself
* Right-click the current tab > Close tab
* Press Ctrl+w to close the current tab
(Note: If you accidentally press Ctrl+w twice, you can re-open the tab by pressing Ctrl+Shift+t to Undo Close Tab)

Before updating to FF 4.0, when I close, it warned me that I was about to close multiple tabs IT ALSO gave me the choice to save all open tabs (not bookmark) so they would all open once I opened FF again. Where is it???

When I close - it does still tell me that I am about to close multiple tabs... but it no longer gives me the option to save open tabs, NOT bookmark, SAVE open tabs. That way, the next time I open Mozilla, all the open tabs from my previous session would open once again. 'Save Open Tabs' is GONE - it would be very helpful to have it back. I don't use it all the time, but it was much easier to save open tabs when I wasn't able to finish what I was doing instead of having to search through the previous days history to find what I need when I start my next session!!!

Firefox now always stores the old session which you can access by going to the History menu and selecting "Restore Previous Session".
If you always open the last set of tabs, an alternative approach is this:
# Click the orange Firefox button, then select options to open the options window
# Go to the General panel
# Change the setting "When Firefox starts" to "Show my windows and tabs from last time"

Excise Item TAB not showing in MIRO

Hi Expert,
While doing Miro, Excise Item Tab not showing we have check the details Like Tax code, Chapter ID, and excise rate Material.
Kindly help me ,
Thanks
Pranav

Hi,
Please go to transaction code MIGO and check whether excise tax exists or not ? if yes, please click on and click on Miscellaneous tab
In case it is shown as In process we would not able to see excise details in MIRO.
Hope, this solves your issue else revert.
Regards,
Tejas

GR and GI for the Subcontracting PO are not aligned

Hello,
We face an issue were the posting dates of the
GR(101 mvt) and GI(543mvt) for the Subcontracting PO are not aligned (GR takes
the posting date as the next day and GI as the current date).
We did an initial analysis and found that it is
the user time zone that leads to the different posting date. The user who does
the GR has a time zone setting of UTC+8 maintained in her user profile.
Whenever the user does a GR for the Process Order after 18:00CET, system
proposes the posting date for GR asthe next day. But GI picks the current date.
As per subcontracting scenario, the GI(goods issue from subcontracting stock)
happens whenever we do the GR. We understand that time zone has an effect on GR
posting date but the question is why GI posting date is not affected? Is it a
standard SAP behaviour?
Procedure -
We create the Process order via COR1 transaction,
In the master recipe we have maintained the control key for the subcontracting
operation.
Purchase Requisition will be created from the
Process Order. This PR is converted to Subcontracting PO via ME21N. The
delivery and PGI is done
via ME2O transaction. We have a custom transaction
to do the GR similar to MIGO transaction.

Hi Manikumar,
Empty the Personal time zone for the specific user & test the same. As by default, system time is maintained in UTC time zone.
Thanks,
Nihar

How do i fix "Merge to HDR.jsx could not be found" cs6?

how do i fix "Merge to HDR.jsx could not be found" cs6?

Nobody can tell without some system info. Start by running the Creative Suite Cleaner Tool and reinstalling PS.
Mylenium

Shipping tab not appearing in PO

Dear Sir,
I hv made all the relevend configuration and vendor creation for PO but still shipping tab not appearing in po.
I dont know wht step i hv missed out, please advise what should i do.
Looking forward for your quick response on th same.
Regards
Parul

Hi Parul
Pls check the following settings.
1.     Define receiving plant for sto. (Storage location also for this plant if required).
2.     Assign receiving plant to company code.
3.     Assign receiving plant to the supplying plants sales org, distribution channel.
4.     Assign shipping point of supplying plant to receiving plant.
5.     Maintain purchasing organization and assign it to receiving plant and company code.
6.     Create receiving plant as a customer in supplying plant (normal customer creation).
7.     Define shipping data for plants: imgu2014mm-----po-----setup sto.
                     Select receiving plant and assign customer number (previous step number)
                     Assign the sales area of supplying plant.
                     Select supplying plant assign the sales area of supplying plant
8.     Assign delivery types and checking rules (imgu2014mm-----po-----setup sto)
9.     Assign document types, one-step procedure, under delivery tolerance. (same above path)
10.     Extend the material to the receiving plant.
11.     For Second plant assign manual shipping point as of first plant (OVL2)
Br.
Ramana

Export to pdf -- Line not aligned

Dear all,
I am making POS System. When printing receipts to pdf, I find that some lines are not aligned.
Is it fonts problem?? Which fonts is more suitable for traditional chinese.

Printing to PDF from what program? Via the Adobe PDF printer? What version? What settings?

Tabs not aligning in cs6

Similar Messages

Maybe you are looking for