Tabular Report for Update a single column

Hello Everyone,
I have a tabular report which will display 1 column (apart from primary key),
1. I will display a edit icon (on primary key)
2. when the user selects this icon, this only row must become updatable (only one column must become text item, so that user can modify the value).
3. Next this text item, i would like to display save button and cancel button so that user can click one of these buttons next to that particular row.
Any help would be appreciated.
Regards
Anil

There is no easy way to do this without some incredibly lengthy javascript. Tabular forms still do not give much declarative control to the developer.
If you are looking to click a button and update one column on one row, it's easiest to change your design to two pages using report and form. Make the first page the report with an Edit button, click the button (nothing more than a link) and it goes to a basic form with only one updateable field. After submit, branch back to the first page. Easy.
For the end user, there are no more mouse clicks involved in this than what you described originally so it's likely it'll be an acceptable application design change.

Similar Messages

  • Report for update of Material with deletion Flag from R/3 to SRM

    Hi All,
               Is any report for Updating material in SRM with deletion indicator for those  deletion flag set in R/3...

    Check material status
      IF mat_mmsta EQ '--'.
        lv_msgv1 = iv_ordered_prod.
        CALL FUNCTION 'BBP_PD_MSG_ADD'
          EXPORTING
            i_msgty       = c_msgty_e
            i_msgid       = 'BBP_PD'
            i_msgno       = 426
            i_msgv1       = lv_msgv1
          EXCEPTIONS
            log_not_found = 1
            OTHERS        = 2.
        IF sy-subrc <> 0.
          PERFORM abort.
        ENDIF.
        IF c_on = c_off.
          MESSAGE e426(bbp_pd) WITH lv_msgv1.
        ENDIF.
      ENDIF.
      if not mat_lvorm is initial.
        lv_msgv1 = iv_ordered_prod.
        call function 'BBP_PD_MSG_ADD'
    program name LBBP_PDIGPF2R
    Check material in backend
      CALL FUNCTION 'META_MATERIAL_READ'
        EXPORTING
          i_mtcom        = ls_mtcom_eci
          logical_system = iv_log_system
        IMPORTING
          e_mmsta        = mat_mmsta
          e_lvorm        = mat_lvorm
        EXCEPTIONS
          mat_not_found  = 1
          OTHERS         = 2.
      IF sy-subrc <> 0.
        lv_msgv1 = iv_ordered_prod.
        lv_msgv2 = iv_plant.
        CALL FUNCTION 'BBP_PD_MSG_ADD'
          EXPORTING
            i_msgty       = c_msgty_e
            i_msgid       = 'BBP_PD'
            i_msgno       = 275
            i_msgv1       = lv_msgv1
            i_msgv2       = lv_msgv2
          EXCEPTIONS
            log_not_found = 1
            OTHERS        = 2.
        IF sy-subrc <> 0.
          PERFORM abort.
        ENDIF.
        IF c_on = c_off.
          MESSAGE e275(bbp_pd) WITH lv_msgv1 lv_msgv2.
        ENDIF.
      ENDIF.
          EXPORTING
            i_msgty       = c_msgty_e
            i_msgid       = 'BBP_PD'
            i_msgno       = 345
          EXCEPTIONS
            log_not_found = 1
            others        = 2.
        if sy-subrc <> 0.
          perform abort.
        endif.
        if c_on = c_off.
    IN SRM PROGRAM LBBP_PDIGPF2R BBP_PD 345 throws message "product x is designed for deletion"
    but it is validationg from fm 'META_MATERIAL_READ'
    please close this thread
    br
    muthu

  • Access for update only one column in table?

    Hi all,
    My need is to grant access for update only one column c1 in table t1.
    I guess I should use view, could you please give me some example? Maybe other ideas?

    Hi,
    You can grant privileges on individual columns.
    GRANT   UPDATE (c1)
    ON      t1
    TO      grantee_name;Look up GRANT in the SQL language manual. Annoyingly, in recent editions of the manual, GRANT is not indexed, but it's in alphabetic order with all the other statements:
    http://docs.oracle.com/cd/E11882_01/server.112/e26088/statements_9013.htm#i2155015

  • Update a single column of a table

    Hi Champs,
    I want to update a single column of table PA0000.
    Following is ABAp code I am using:
    UPDATE pa0000 SET massn = wa_upd_actn71-massn
                       WHERE pernr = wa_upd_actn71-pernr AND
                              massn = c_crct_entry.
    where in current scenario wa_upd_actn71-massn = 54,
                                         wa_upd_actn71-pernr = 10005092,
                                         c_crct_entry = 71.
    But this code is not working and note updating the DB table PA0000.
    Can you help me out?
    Edited by: Nishant Khimesra on Apr 7, 2009 2:00 PM
    Edited by: Nishant Khimesra on Apr 7, 2009 2:00 PM

    hiii,
    If u want to update it thr program then write the query as update <dbtablename> set fld = value where <condn>. make sure that the values u pass are converted as per the values in database.
    2nd way is goto se16n
    specify table name and then enter &sap_edit on command line. sap editing function will be edited. specify the filter parameters on the field and then execute the transaction. u can change thd data instantly as the data appears in editable alv.
    Regards,
    Anil N.

  • Need to update a single column in a table with some other column value

    Hi experts,
    I was about to change one column data type in a table. Then I renamed that column name to "old_column_name" . Later I added new column name with required datatype( My case its NCLOB). Now I want to update the new column value with old column value.I mean i have to copy the data. But data amount is very huge. Its more than 1.5 crores of data. But on promote day, I have only 1 hr of outage. Please suggest the effective solution to achieve this.

    Hi Stew
    I have 1 primary key in my table and 11 foreign keys in my table.there are 20 check constraints as well.
    If i go for an online redefine of a table, these objects will be created back automatically?
    Please clarify.
    This is my table. Here Remarks is the column with CLOB datatype. To support multi language, I need to change it to NCLOB. That column having data so i cant rename it.
    So I added new column , after renaming that remarks to old_remarks. Now new column remarks is ready with NCLOB data type, but no data in it.
    To copy the old remarks column into new remarks column, i thought to write one script. But how it is achievable using "DBMS_REDEFINITION". Please explain me,
    create table XXXXXXXXXX
    ID NUMBER(8),
    COMPLETED_DATE DATE,
    COMMUNICATION_MEDIUM VARCHAR2(32),
    REMARKS1 VARCHAR2(4000),
    COPY VARCHAR2(1),
    IO_MARKER VARCHAR2(3),
    EVENT_DATE DATE,
    CON_REF_NO NUMBER(8),
    DEP_CODE VARCHAR2(6),
    SFM_STAFF_NO NUMBER(8),
    CRPD_ID NUMBER(8),
    CRPD_ID_COPY NUMBER(8),
    STATUS VARCHAR2(2),
    COMEBACK_NO NUMBER(2),
    ADD_ADD_ID NUMBER(10),
    AEV_ID NUMBER(8),
    OLAY_ID NUMBER(8),
    COE_TYPE VARCHAR2(3),
    CET_CODE VARCHAR2(6),
    DEP_CODE_RAISED_BY VARCHAR2(6),
    SFM_STAFF_NO_RAISED_BY NUMBER(8),
    USR_CREATED VARCHAR2(30),
    CREATED DATE,
    USR_CHANGED VARCHAR2(30),
    CHANGED DATE,
    EXT_REF_ID VARCHAR2(150),
    REPLY_EXPECTED_DATE DATE,
    SEC_ID VARCHAR2(8) not null,
    PROTECTED VARCHAR2(1),
    APPROVED_BY NUMBER(8),
    DOCUMENT BLOB,
    OLD_REMARKS CLOB,
    CTS_ID NUMBER(8),
    MESSAGE_STATUS VARCHAR2(4),
    WORD_DOCUMENT NCLOB,
    REMARKS NCLOB
    Edited by: Hema on Jul 2, 2012 8:31 AM
    Edited by: Hema on Jul 2, 2012 8:31 AM

  • Add a Select List to a Report, for Updating a table.

    I am working on Apex 3.0. I had to allow the Report could update a table. I added two checkbox to the report, and now I should add a Select List. I've tried a lot of ways but I don't know how can I pass the value selected, related to the ID of the row. I've tried with a JavaScript but I couldn't. A process should update the row on the DB when the user change the value on the select list. There is a save button that perform the process. How I could pass the ID of the row and the value to a PL/SQL process?
    Many Thanks for your suggestions.
    SELECT PFA.FOCUS_AREA_ID
    ,FOCUS_AREA_NAME,     
    apex_item.checkbox(1, FA.FOCUS_AREA_ID, DECODE(PFA.FOCUS_AREA_ID, null, ' ','checked="checked" ') ||
    'id="chk'||rownum||'"'|| ' onclick="checking(this)" ') as Focus_AREA_CHK,
    APEX_ITEM.SELECT_LIST(
    *5,*
    PFA.FOCUS_TYPE,
    *'DIS;DIS,ENG;ENG,EXP;EXP,TGT;TGT',*
    *'id="sl_'||FA.FOCUS_AREA_ID||' " ',*
    *'YES',*
    NULL,
    *'-Select-',*
    *DECODE(PFA.FOCUS_AREA_ID, null, 'disabled="disabled" ','' ) || ' --onchange="selectedElement(this)" ',*
    *'NO'*
    *)* "Type"
    FROM PROGRAM_FOCUS_AREAS PFA,
    FOCUS_AREAS FA
    WHERE
    FA.FOCUS_AREA_ID = PFA.FOCUS_AREA_ID(+)
    AND :P151_PROGRAM_ID = PFA.VS_PROGRAM_ID(+)

    **Deleted**
    Edited by: user4498053 on Dec 27, 2011 11:24 AM

  • Windows Intune Reports for update

    Hi all,
    Once i installed monthly patches , lets take 5 patches . Is it possible to pull out the exact report for whether those five patches got insatlled.

    Nope. You can only run a report of all installed updates based on update classifications.

  • Update a single column in query only form

    Forms 9i, database 10g
    I am migrating the form from 6i to 9i. I have a form that is query only except for one field that can be updated. The main block1, based on a view, includes most of the person's personal data, none of which is updateable.. Another block2, based on a table, includes the 3 not-null colums that cannot be updated, and a remarks field, which can be updated. The block2 properties are set YES for insert, update, delete. The three non-updatable columns have properties set to NO for I,U and D, but the remarks column has I,U and D properties set to YES. When I enter data into the remarks field and press the Save on the Forms icon bar, I get error FRM-40508:unable to insert record and the ORA-00001:unique constraint. I don't should not be able insert and I don't want to, I just want to update one column.
    What am I not setting correctly in 9i? The same triggers and code works in 6i.
    Any suggestions are greatly appreciated.
    Vija

    No, there are no on-update triggers, but there are Post-Qry. I did run it in debug mode, but there is no good place to put a break point, since retrieval of the data works fine. Should I have key-commit trigger on the block to do the update?
    Vija

  • Searching for Data in the Report for a non-selected column in display.

    Hello,
    I have an interactive report as given below:
    select user, dept_name, sal, description, title from hr;
    Now, in the report display options I remove the title and description from the display as you know title and description are 2000 characters each.
    If I show then it takes the whole page to display one record and with this option I can search any text in the Title or Description columns.
    Now, I have hidden these two columns and when I search I do not see any records.
    Can any one tell me how to achieve this behaviour.
    What I am looking is, I do not show the column 'TITLE' or 'DESCRIPTION' and user show be able to search for any important data inside these columns.
    Please let me know how can we do this.
    Please point me to an already published article or solution or any help on this type.
    Appreciate your help on this.
    thanks
    Edited by: user648778 on Sep 18, 2008 6:13 PM

    As far as I can see this will not work. You could use a trick and make a query like this:
    SELECT USER, dept_name, sal,
              apex_item.hidden (10, mgrdescription || title)
           || '<img src="#IMAGE_PREFIX#some_nice_icon.gif">' title_description
      FROM hrThis would not display the title and description but an image and it would give you a possibility to filter on those.
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://apex.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

  • Report for updates Graph

    I'm opening a OGD ( Oracle graphics ) in the form and passing record group to it which updates the graph. Now I want to have report with this updated graph as part of it. The chart item on reports does not show the updated graph but shows the one saved when created in graphics builder. How to get the refreshed graph on report. I want to take print of the graph without using RUN_PRODUCT for graphics.
    PL. Help..
    Thanx
    Regards
    Alankar
    null

    In ConfigMgr 2012, you should be looking at the Software Update group and run the reports based on them.
    <b>Kent Agerlund | My blogs: <a href="http://blog.coretech.dk/kea">blog.coretech.dk/kea</a> and <a href="http://scug.dk/">SCUG.dk/</a> | Twitter: <a href="https://twitter.com/#!/Agerlund">
    @Agerlund</a> | Linkedin: <a href="http://www.linkedin.com/in/kentagerlund">Kent Agerlund</a></b> | <a href="http://www.amazon.com/System-Center-Configuration-Manager-ebook/dp/B008ZSD8QM/ref=sr_1_4?s=digital-text&ie=UTF8&qid=1345615754&sr=1-4&keywords=system&#43;center&#43;configuration&#43;manager&#43;2012">
    Mastering ConfigMgr 2012 The Fundamentals </a>

  • Windows SBS 2008 Deployment Report for Updates in SBS Console Is Empty

    The SBS Console on my Windows SBS 2008 is able to report updates which are available for deployment, and it also is aware of the number of computers which are affected by the update in the Security>Updates summary page in the SBS console. However, if
    I select an update and click "View the update deployment report," there are no computers listed.
    I have gone through the steps outlined in these posts:
    Repair monitoring and reporting features in Windows Small Business Server 2008
    SBS2008: Windows SBS Console may crash because of incorrect Environment Variables
    My variables read read TEMP=C:\user\me\appdata\local\temp\1 and TEM=C:\user\me\appdata\local\temp\1  from the command line, but in the Environment Variables window, they both read as C:\user\me\appdata\local\temp\
    SBS 2008 Console May Take Too Long to Display Alerts and Security Statuses, Display Not Available, or Crash
    (I was unable to run this from the command line, even though I was running the command as administrator, and had remote connections allowed. I ended up running this command in the SQL management studio.)
    Repair Windows Update Services
    I am sorry for the missing hyperlinks, but I am not allowed to post them until my account has been verified. Searching for the article titles in bold will take you to the referenced page. I thought it would be helpful to mention the steps I have tried to take
    before taking to the forums with my problems.
    Any ideas? Does this need any clarification?

    I did take a look at the console. When I refresh the list under the Updates
    tab in the Security ribbon, I get multiple lines of:
    [11340] 140114.090516.2325: Update Services: GetConfiguration: level Medium is read from config file C:\Program Files\Windows Small Business Server\Data\sbsconfig.xml
    [16772] 140114.090535.4166: Update Services: GetConfiguration: level High is read from config file C:\Program Files\Windows Small Business Server\Data\sbsconfig.xml
    Then, every time I try to view the computers to which a particular update apply, the console throws these lines into the Console.log:
    [8416] 140114.090659.3547: AdminTME: Committer: RunAsync TaskViewDeploymentReport
    [21016] 140114.090659.3703: AdminTME: AdminDataLink Running Task: TaskViewDeploymentReport
    [21016] 140114.090659.3703: AdminTME: Status: TaskId = TaskViewDeploymentReport, RootTaskId = TaskViewDeploymentReport, Success: True, Warning: False, Continue: False, Message: 
    [8416] 140114.090700.5420: AdminTME: Committer: Completed called
    [8416] 140114.090700.5420: AdminTME: Committer: Task was cancelled.
    [8416] 140114.090700.5420: AdminTME: Committer: Committer Completed.
    Now that I have been verified, I can include this screenshot, where you can see that I am expecting 4 computers to be listed in the pop-up window:
    Any additional thoughts? In the meantime, I will be doing some searching on the new adminTME lines.

  • Adding of new column in report for downpayment

    Dear Experts,
    We want to add column for downpayment in report S_ALR_87013019 for which we have created a new report with the help of GRR2, (report)602 - (Description)internal orders and have selected its sub category 60BU-001 - Budg/act/commitm, also we have created a new column for downpayment and have assigned valuation type - 61(Downpayment) and valuation - zero(Legal valuation).But while posting downpayment the report is not getting updatedwith the downpayment values. The internal order that is being created is a statistical order but even if real orders are assigned still the values are not getting displayed.
    Please tell us the combination of valution type and valuation or any other characteristic that requires to be made for updating the downpayment column.
    Thanks & Regards
    Edited by: Aniruddha B. Mahalle on Feb 21, 2012 11:25 AM

    hi
    check cost element is created also check is there any exclustion of cost element setting done.
    Edited by: AP on Feb 21, 2012 11:50 AM

  • SINGLE FOR UPDATE

    Hi,
    can anybody tell me the user of "SINGLE FOR UPDATE" keywords in SELECT statement?
    Priya

    As given by SAP -
    ... SINGLE [FOR UPDATE]
    If SINGLE is specified, the resulting set has a single line. If the remaining additions to the SELECT command select more than one line from the database, the first line that is found is entered into the resulting set. The data objects specified after INTO may not be internal tables, and the APPENDING addition may not be used. The addition ORDER BY can also not be used.
    An exclusive <b>LOCK</b> can be set for this line using the FOR UPDATE addition when a single line is being read with SINGLE. The SELECT command is used in this case only if all primary key fields in logical expressions linked by AND are checked to make sure they are the same in the WHERE condition. Otherwise, the resulting set is empty and sy-subrc is set to 8. If the lock causes a deadlock, an exception occurs. If the FOR UPDATE addition is used, the SELECT command circumvents SAP buffering.
    LOCK - Lock protected data from being accessed by several users at the same time as a shared lock or as exclusive locks
    Regards,
    Amit
    Reward all helpful replies.

  • Single column value into two column of report

    Hi frnds,
    I have a column of Adress in my databse table from where i have to fetch values and show it a report
    able to get report but showing in single column if i take a printout paper will be wasted so I thought of passing these values to two different columns
    please help me in giving some suggestions

    In Oracle 9 you can get rid of the regex functions and use traditional SUBSTR, INSTR and REPLACE:
    ABSOLUTELY NOT TESTED...
    SELECT col1,SUBSTR ( ','||col2||',', instr(','||col2||',',',',lvl)+1,instr(','||col2||',',',',lvl+1)-instr(','||col2||',',',',lvl)-1)
      FROM table_name,
           (SELECT LEVEL lvl
              FROM (SELECT MAX (LENGTH (REPLACE ( col2, ',',''))) mx
                      FROM table_name)
            CONNECT BY LEVEL <= mx + 1)
    WHERE lvl - 1 <= LENGTH (REPLACE ( col2, ',',''));Max

  • Multiple Select Lists on Tabular Report

    I am trying to build a tabular report to allow users to edit records within a table. This tabular report has several non-editable columns on it as well as two select list boxes. Theh user would select a value from the first list box. That value would then become part of the where clause of the next select list box. However I have not been able to pass the new value to second list box.
    My application deals with metadata, so here's how the screen looks: (Field names in {} are select lists)
    Select File to Edit: {this list works fine}
    [Field Name] [Derived] {Parent file} {*Parent Field*}
    The Parent Field drop down is never getting populated. Parent file dropdown works fine.
    I don't think the problem is with my select statement. I think the variable I am using in my select statement is never having it's value set.
    Any help would be appreciated.
    Hope this makes sense.
    Don

    there's currently no easy way to handle your request in html db. it might be doable using a few hacks here and there, but it's almost not worth getting into because of the complexity of the approach. my recommendations are that you...
    a) consider setting your form up as a single-row update rather than a multi-row one. with a single-row form, it's a much simpler matter to have your {Parent Field} lov be driven by your {Parent File} one.
    b) if the values in your Parent File lov aren't too great in number, you might consider handling this with javascript added to your tabular form page. i don't know that exact javascript, but you should be able to find it pretty easily on the web.
    hope this helps,
    raj

Maybe you are looking for