Takes more time to start & shutdown the database
Hi All,
I have created a database in oracle9i by following manual steps. Every thing was created successfully and am able to start the database and shutdown also.
but the problem is while giving the startup command it takes more time to start the database and the same during the shutdown. So anyone help me..
the follwing are the pfile specifications:
db_name=practice
instance_name=practice
control_files= 'E:\practice\control\control1.ctl',
'D:\practice\control\control2.ctl'
db_block_size=2048
db_cache_size=20m
shared_pool_size=20m
background_dump_dest='E:\practice\bdump'
user_dump_dest='E:\practice\udump'
Thanks in Advance
Every thing was created successfully and am able to start the database and > shutdown also.Please restate the above.
problem is while giving the startup command it takes more time to start the >database and the same during the shutdownHow have you compared? Could it be O/S resources, installation of additional software; you have not mentioned the O/S and complete version of your database.
You can review the following although I am bit unclear;
http://download.oracle.com/docs/cd/B10501_01/server.920/a96533/instreco.htm#440322
Adith
Similar Messages
-
Why string type shared variable takes more time to update in the client
I am using shared variables to share the data across a master and the client PCs connected in a network. (Network published & no buffering)
I have created an integer type shared variable(I32) and a string type shared variable (data size is 60 bytes) in the Master and subscribing to the same in the client PCs. In the master PC, I am modifying the data in this order - update the data in the string type variable and then update the data in the integer vaiable.
But in the client PCs, due to the size difference in the variables, I am receiving the data of the integer first and after that about 3-4 sec later only I am receiving the string data. Can any optimization be done to reduce this latency period? Instead of the string data type any better data type will reduce this delay?
Please suggst. Advnced thanks.Latency has a lot to do with your network. 3-4 seconds is a long time though. This could also be due to the larget data size of your string. The integer data size is definitaly not 60 bytes. If you're looking for better performance, I would highly recommend looking into Datasocket communication or TCP/IP communication. (There are shipping example for both.)
When it comes to performance of throughput and efficiency, network-published variables are lower on the totem pole.
I hope this helps,
Kevin S.
Applications Engineer
National Instruments -
Database Connectivity takes long time if one of the Node is down .. ??
Hello All,
Env: 10.2.0.4 on Solaris 10
I have 2 nodes.
When Node1 server is down, it takes long time to connec to the database.
tnsping would give "OK(2050ms)". Below is the tnsalias.
RAC_test =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST=20.268.169.123)(PORT= 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST=20.268.169.127)(PORT= 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVICE_NAME = DK.com)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
(RETRIES = 180)
(DELAY = 5)
)I put the trace on sqlnet.ora and found that first it pings to the "20.268.169.123",
since the Server is down there will not be any reply and this consumes the delay and
later it would ping "20.268.169.127" and connect to it.
If i keep "20.268.169.127" above "20.268.169.123" in tnsalias, and keep "LOAD_BALANCE=no",
it gets connected very fast, as its directly connecting to Node2. In tnsping i get Ok(40ms).
How do i reduce the connect timing if i use the first step. Why does it take long time for
Oracle Client to understand that the Node1 Server is down ?
TIA,
J JI hope the IP's you are using in the TNS are Virtual IP's.
You must use Virtual IP's / hostnames for the failover to be quick. If Node 1 is not available then then it's (Node 1's) virtual IP would also get assigned to Node 2 hence all client connections are still able to get a response from the Node Virtual IP address without needing to wait for TCP/IP timeouts. This helps clients to get notified immediately that node 1 is unavailable and the connection tries the 2nd ip/host in the connect descriptor.
Hope this helps.
- Siba -
Af:commandNavigationItem takes more time to perform action on screen
For my project there is a dynamic implementation of af:commandNavigationItem and the actions also will be binded during runtime.
This code was working fine with the JDeveloper 11.1.1.0.2 (OWS 10.3.0) Version, but after migrating the code to JDeveloper 11.1.1.2.0 (OWS 10.3.2), it shows hourglass for a longer time (which was unusual) and then it perform the operation.
I ran the project in Debug mode and I found it takes more time to come to the breakpoint.
It writes the below information in console
<UnifiedDialogTag><setVisible> property "visible" setter is using a no-op implementation. Used in extreme cases when the property value, beyond the default value, results in unwanted behavior.
Experts: Please through some light to proceed with this issue as I am looking some lead information from where I have to look into the issue.Hi,
can you file a bug or provide a testcase ?
Frank -
Save for web - system take more time
Hi, We used adobe photo shop cloud one of our blog for optimized images. We use "save for web" option in photoshop. But its will take more time. What is the reason. How to solve this issue.
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
Query Takes more Time when i execute from the Instant client.
Hi,
Currently in our Env we have some Queries takes more time when we run from the Instant Client.
System Details
OS=Solaris 10 x86 64bit
Oracle 10.2.0.4
Client Side
$ sqlplus trd_trd_ro/trd_trd_ro@prdba001/TRADE1
SQL*Plus: Release 10.2.0.2.0 - Production on Mon Aug 9 16:26:25 2010
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Release 10.2.0.4.0 - Production
SQL> set timing on
SQL> select mod(lastinstmessagesequence, 1000000000) LastInstIDSeqNo from tibex_msgseqbyuseralias where useralias='2221';
no rows selected
Elapsed: 00:01:54.19
SQL> Disconnected from Oracle Database 10g Release 10.2.0.4.0 - ProductionSame Query running on Server Side
^C130-oracle@prdba001 txt: sql
Database: trd_trd_owner/trd_trd_owner@prdba001/TRADE1
SQL*Plus: Release 10.2.0.4.0 - Production on Mon Aug 9 17:15:18 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Release 10.2.0.4.0 - Production
trd_trd_owner@TRADE1> set timing on
trd_trd_owner@TRADE1> select mod(lastinstmessagesequence, 1000000000) LastInstIDSeqNo from tibex_msgseqbyuseralias where useralias='2221';
no rows selected
Elapsed: 00:00:00.12
trd_trd_owner@TRADE1> exitKindly help me what could be the Issues.Hi Charles,
Thanks for your Quick response.I pulled the info.
sys@TRADE1> SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR('bpxr7axhxaqvy',NULL,'ALLSTATS LAST'));
PLAN_TABLE_OUTPUT
SQL_ID bpxr7axhxaqvy, child number 0
select /*+ GATHER_PLAN_STATISTICS */ mod(lastinstmessagesequence, :"SYS_B_0") LastInstIDSeqNo from
tibex_msgseqbyuseralias where useralias=:"SYS_B_1"
Plan hash value: 1955857846
| Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers |
| 1 | SORT GROUP BY NOSORT | | 1 | 21 | 0 |00:00:00.06 | 6121 |
| 2 | VIEW | | 1 | 21 | 0 |00:00:00.06 | 6121 |
| 3 | UNION-ALL | | 1 | | 0 |00:00:00.06 | 6121 |
| 4 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.05 | 3073 |
|* 5 | TABLE ACCESS FULL | TIBEX_QUOTE | 1 | 30080 | 0 |00:00:00.05 | 3073 |
| 6 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
| 7 | TABLE ACCESS BY INDEX ROWID| TIBEX_ORDER | 1 | 971 | 0 |00:00:00.01 | 3 |
|* 8 | INDEX RANGE SCAN | TIBEX_ORDER_IDX_OLT | 1 | 971 | 0 |00:00:00.01 | 3 |
| 9 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 10 | TABLE ACCESS FULL | TIBEX_TSTRADE | 1 | 1 | 0 |00:00:00.01 | 3 |
| 11 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 12 | TABLE ACCESS FULL | TIBEX_IOIREQUEST | 1 | 1 | 0 |00:00:00.01 | 3 |
| 13 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 126 |
|* 14 | TABLE ACCESS FULL | TIBEX_BESTEXREL | 1 | 1 | 0 |00:00:00.01 | 126 |
| 15 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 2862 |
|* 16 | INDEX FAST FULL SCAN | SYS_C0058325 | 1 | 339 | 0 |00:00:00.01 | 2862 |
| 17 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 31 |
|* 18 | TABLE ACCESS FULL | TIBEX_EDPPULLORDERS | 1 | 1 | 0 |00:00:00.01 | 31 |
| 19 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 20 | INDEX RANGE SCAN | SYS_C0058803 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 21 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 22 | INDEX RANGE SCAN | SYS_C0057785 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 23 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 24 | INDEX RANGE SCAN | SYS_C0057827 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 25 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 26 | TABLE ACCESS FULL | TIBEX_DELETEADMIN | 1 | 1 | 0 |00:00:00.01 | 3 |
| 27 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 28 | INDEX RANGE SCAN | SYS_C0058148 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 29 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 30 | INDEX RANGE SCAN | SYS_C0058264 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 31 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 32 | INDEX RANGE SCAN | SYS_C0058516 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 33 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 34 | INDEX RANGE SCAN | SYS_C0058561 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 35 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 36 | INDEX RANGE SCAN | SYS_C0058783 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 37 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 38 | INDEX RANGE SCAN | SYS_C0058977 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 39 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 40 | INDEX RANGE SCAN | SYS_C0058859 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 41 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 42 | INDEX RANGE SCAN | SYS_C0059197 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 43 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 44 | TABLE ACCESS FULL | TIBEX_CANCELTRDADMIN | 1 | 1 | 0 |00:00:00.01 | 3 |
| 45 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 46 | TABLE ACCESS FULL | TIBEX_BULKCANCELADMIN | 1 | 1 | 0 |00:00:00.01 | 3 |
Predicate Information (identified by operation id):
PLAN_TABLE_OUTPUT
5 - filter("LASTINSTUSERALIAS"=:SYS_B_1)
8 - access("LASTINSTUSERALIAS"=:SYS_B_1)
10 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
12 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
14 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
16 - filter("USERALIAS"=:SYS_B_1)
18 - filter("USERALIAS"=:SYS_B_1)
20 - access("USERALIAS"=:SYS_B_1)
22 - access("USERALIAS"=:SYS_B_1)
24 - access("USERALIAS"=:SYS_B_1)
26 - filter(("USERALIAS" IS NOT NULL AND "USERALIAS"=:SYS_B_1))
28 - access("USERALIAS"=:SYS_B_1)
30 - access("USERALIAS"=:SYS_B_1)
32 - access("USERALIAS"=:SYS_B_1)
34 - access("USERALIAS"=:SYS_B_1)
36 - access("USERALIAS"=:SYS_B_1)
38 - access("USERALIAS"=:SYS_B_1)
40 - access("USERALIAS"=:SYS_B_1)
42 - access("USERALIAS"=:SYS_B_1)
44 - filter("USERALIAS"=:SYS_B_1)
46 - filter("USERALIAS"=:SYS_B_1)
SQL_ID bpxr7axhxaqvy, child number 1
select /*+ GATHER_PLAN_STATISTICS */ mod(lastinstmessagesequence, :"SYS_B_0") LastInstIDSeqNo from
tibex_msgseqbyuseralias where useralias=:"SYS_B_1"
Plan hash value: 1955857846
Plan hash value: 1955857846
| Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers |
| 1 | SORT GROUP BY NOSORT | | 1 | 21 | 0 |00:00:00.12 | 8545 |
| 2 | VIEW | | 1 | 21 | 0 |00:00:00.12 | 8545 |
| 3 | UNION-ALL | | 1 | | 0 |00:00:00.12 | 8545 |
| 4 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.10 | 5496 |
|* 5 | TABLE ACCESS FULL | TIBEX_QUOTE | 1 | 21056 | 0 |00:00:00.10 | 5496 |
| 6 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 4 |
| 7 | TABLE ACCESS BY INDEX ROWID| TIBEX_ORDER | 1 | 660 | 0 |00:00:00.01 | 4 |
|* 8 | INDEX RANGE SCAN | TIBEX_ORDER_IDX_OLT | 1 | 660 | 0 |00:00:00.01 | 4 |
| 9 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 10 | TABLE ACCESS FULL | TIBEX_TSTRADE | 1 | 1 | 0 |00:00:00.01 | 3 |
| 11 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 12 | TABLE ACCESS FULL | TIBEX_IOIREQUEST | 1 | 1 | 0 |00:00:00.01 | 3 |
| 13 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 126 |
|* 14 | TABLE ACCESS FULL | TIBEX_BESTEXREL | 1 | 1 | 0 |00:00:00.01 | 126 |
| 15 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.02 | 2862 |
|* 16 | INDEX FAST FULL SCAN | SYS_C0058325 | 1 | 339 | 0 |00:00:00.02 | 2862 |
| 17 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 31 |
|* 18 | TABLE ACCESS FULL | TIBEX_EDPPULLORDERS | 1 | 1 | 0 |00:00:00.01 | 31 |
| 19 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 20 | INDEX RANGE SCAN | SYS_C0058803 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 21 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 22 | INDEX RANGE SCAN | SYS_C0057785 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 23 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 24 | INDEX RANGE SCAN | SYS_C0057827 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 25 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 26 | TABLE ACCESS FULL | TIBEX_DELETEADMIN | 1 | 1 | 0 |00:00:00.01 | 3 |
| 27 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 28 | INDEX RANGE SCAN | SYS_C0058148 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 29 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
PLAN_TABLE_OUTPUT
|* 30 | INDEX RANGE SCAN | SYS_C0058264 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 31 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 32 | INDEX RANGE SCAN | SYS_C0058516 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 33 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 34 | INDEX RANGE SCAN | SYS_C0058561 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 35 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 36 | INDEX RANGE SCAN | SYS_C0058783 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 37 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 38 | INDEX RANGE SCAN | SYS_C0058977 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 39 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 40 | INDEX RANGE SCAN | SYS_C0058859 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 41 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 42 | INDEX RANGE SCAN | SYS_C0059197 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 43 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 44 | TABLE ACCESS FULL | TIBEX_CANCELTRDADMIN | 1 | 1 | 0 |00:00:00.01 | 3 |
| 45 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 46 | TABLE ACCESS FULL | TIBEX_BULKCANCELADMIN | 1 | 1 | 0 |00:00:00.01 | 3 |
Predicate Information (identified by operation id):
5 - filter("LASTINSTUSERALIAS"=:SYS_B_1)
8 - access("LASTINSTUSERALIAS"=:SYS_B_1)
10 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
12 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
14 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
16 - filter("USERALIAS"=:SYS_B_1)
18 - filter("USERALIAS"=:SYS_B_1)
20 - access("USERALIAS"=:SYS_B_1)
22 - access("USERALIAS"=:SYS_B_1)
24 - access("USERALIAS"=:SYS_B_1)
26 - filter(("USERALIAS" IS NOT NULL AND "USERALIAS"=:SYS_B_1))
28 - access("USERALIAS"=:SYS_B_1)
30 - access("USERALIAS"=:SYS_B_1)
32 - access("USERALIAS"=:SYS_B_1)
34 - access("USERALIAS"=:SYS_B_1)
36 - access("USERALIAS"=:SYS_B_1)
38 - access("USERALIAS"=:SYS_B_1)
40 - access("USERALIAS"=:SYS_B_1)
42 - access("USERALIAS"=:SYS_B_1)
44 - filter("USERALIAS"=:SYS_B_1)
46 - filter("USERALIAS"=:SYS_B_1)
SQL_ID bpxr7axhxaqvy, child number 2
select /*+ GATHER_PLAN_STATISTICS */ mod(lastinstmessagesequence, :"SYS_B_0") LastInstIDSeqNo from
tibex_msgseqbyuseralias where useralias=:"SYS_B_1"
Plan hash value: 1955857846
| Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | Reads |
| 1 | SORT GROUP BY NOSORT | | 1 | 21 | 1 |00:00:00.13 | 8476 | 3 |
| 2 | VIEW | | 1 | 21 | 1 |00:00:00.13 | 8476 | 3 |
| 3 | UNION-ALL | | 1 | | 1 |00:00:00.13 | 8476 | 3 |
| 4 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.10 | 5283 | 0 |
|* 5 | TABLE ACCESS FULL | TIBEX_QUOTE | 1 | 21056 | 0 |00:00:00.10 | 5283 | 0 |
| 6 | SORT GROUP BY NOSORT | | 1 | 1 | 1 |00:00:00.01 | 148 | 3 |
| 7 | TABLE ACCESS BY INDEX ROWID| TIBEX_ORDER | 1 | 660 | 150 |00:00:00.01 | 148 | 3 |
PLAN_TABLE_OUTPUT
|* 8 | INDEX RANGE SCAN | TIBEX_ORDER_IDX_OLT | 1 | 660 | 150 |00:00:00.01 | 5 | 0 |
| 9 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
|* 10 | TABLE ACCESS FULL | TIBEX_TSTRADE | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
| 11 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
|* 12 | TABLE ACCESS FULL | TIBEX_IOIREQUEST | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
| 13 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 126 | 0 |
|* 14 | TABLE ACCESS FULL | TIBEX_BESTEXREL | 1 | 1 | 0 |00:00:00.01 | 126 | 0 |
| 15 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.02 | 2862 | 0 |
|* 16 | INDEX FAST FULL SCAN | SYS_C0058325 | 1 | 339 | 0 |00:00:00.02 | 2862 | 0 |
| 17 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 31 | 0 |
|* 18 | TABLE ACCESS FULL | TIBEX_EDPPULLORDERS | 1 | 1 | 0 |00:00:00.01 | 31 | 0 |
| 19 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 20 | INDEX RANGE SCAN | SYS_C0058803 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 21 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 22 | INDEX RANGE SCAN | SYS_C0057785 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 23 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 24 | INDEX RANGE SCAN | SYS_C0057827 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 25 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
|* 26 | TABLE ACCESS FULL | TIBEX_DELETEADMIN | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
| 27 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 28 | INDEX RANGE SCAN | SYS_C0058148 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 29 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 30 | INDEX RANGE SCAN | SYS_C0058264 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 31 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 32 | INDEX RANGE SCAN | SYS_C0058516 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 33 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 34 | INDEX RANGE SCAN | SYS_C0058561 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 35 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 36 | INDEX RANGE SCAN | SYS_C0058783 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 37 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 38 | INDEX RANGE SCAN | SYS_C0058977 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 39 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 40 | INDEX RANGE SCAN | SYS_C0058859 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 41 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 42 | INDEX RANGE SCAN | SYS_C0059197 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 43 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
|* 44 | TABLE ACCESS FULL | TIBEX_CANCELTRDADMIN | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
| 45 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
|* 46 | TABLE ACCESS FULL | TIBEX_BULKCANCELADMIN | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
Predicate Information (identified by operation id):
5 - filter("LASTINSTUSERALIAS"=:SYS_B_1)
8 - access("LASTINSTUSERALIAS"=:SYS_B_1)
10 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
12 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
14 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
16 - filter("USERALIAS"=:SYS_B_1)
18 - filter("USERALIAS"=:SYS_B_1)
20 - access("USERALIAS"=:SYS_B_1)
22 - access("USERALIAS"=:SYS_B_1)
24 - access("USERALIAS"=:SYS_B_1)
26 - filter(("USERALIAS" IS NOT NULL AND "USERALIAS"=:SYS_B_1))
28 - access("USERALIAS"=:SYS_B_1)
30 - access("USERALIAS"=:SYS_B_1)
32 - access("USERALIAS"=:SYS_B_1)
34 - access("USERALIAS"=:SYS_B_1)
36 - access("USERALIAS"=:SYS_B_1)
38 - access("USERALIAS"=:SYS_B_1)
PLAN_TABLE_OUTPUT
40 - access("USERALIAS"=:SYS_B_1)
42 - access("USERALIAS"=:SYS_B_1)
44 - filter("USERALIAS"=:SYS_B_1)
46 - filter("USERALIAS"=:SYS_B_1)
249 rows selected. -
Import SCA files in Development Tab of the Transport Studio take more time
Hi,
After Check-In files in the Transport Studio, the import of SCA files starts in the development Tab of the Transport Studio.
The import takes more time. Why this happens?
Am I missing any configuration? Please specify in detail.
Thanks in Advance,
SathyaSC: sap.com_SAP-JEE:
SDM-deploy
Returncode : Not executed.
How to check the username, password and url for SDM?
Log file of Repository-import:
Info:Starting Step Repository-import at 2009-10-13 22:15:49.0484 +5:00
Info:Component:sap.com/SAP_JTECHS
Info:Version :SAP AG.20060119105400
Info:3. PR is of type TCSSoftwareComponent
Info:Component:sap.com/SAP_BUILDT
Info:Version :SAP AG.20060411165600
Info:2. PR is of type TCSSoftwareComponent
Info:Component:sap.com/SAP-JEE
Info:Version :SAP AG.20060119105300
Info:1. PR is of type TCSSoftwareComponent
Info:Step Repository-import ended with result 'not needed' at 2009-10-13 22:15:49.0500 +5:00
Log File of CBS-make :
Import got failed.
Info:build process already running: waiting for another period of 30000 ms
Info:no changes on the CBS request queue (DM0_DEMObp1_D) after a waiting time of 14430000 ms
Fatal:The request queue is not processed by the CBS during the given time intervall => TCS cannot import the request because queue is not empty
Fatal:There seems to be a structural problem in the NWDI. Please look after the operational status of the CBS.
Fatal Exception:com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: The request queue is not processed during the given time intervall. There seems to be a structural problem in the NWDI. Please look after the operational status of the CBS.:communication error: The request queue is not processed during the given time intervall. There seems to be a structural problem in the NWDI. Please look after the operational status of the CBS.
com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: The request queue is not processed during the given time intervall. There seems to be a structural problem in the NWDI. Please look after the operational status of the CBS.
at com.sap.cms.tcs.client.CBSCommunicator.importRequest(CBSCommunicator.java:369)
at com.sap.cms.tcs.core.CbsMakeTask.processMake(CbsMakeTask.java:120)
at com.sap.cms.tcs.core.CbsMakeTask.process(CbsMakeTask.java:347)
at com.sap.cms.tcs.process.ProcessStep.processStep(ProcessStep.java:77)
at com.sap.cms.tcs.process.ProcessStarter.process(ProcessStarter.java:179)
at com.sap.cms.tcs.core.TCSManager.importPropagationRequests(TCSManager.java:376)
at com.sap.cms.pcs.transport.importazione.ImportManager.importazione(ImportManager.java:216)
at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.execImport(ImportQueueHandler.java:585)
at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.startImport(ImportQueueHandler.java:101)
at com.sap.cms.pcs.transport.proxy.CmsTransportProxyBean.startImport(CmsTransportProxyBean.java:583)
at com.sap.cms.pcs.transport.proxy.CmsTransportProxyBean.startImport(CmsTransportProxyBean.java:559)
at com.sap.cms.pcs.transport.proxy.LocalCmsTransportProxyLocalObjectImpl0.startImport(LocalCmsTransportProxyLocalObjectImpl0.java:1736)
at com.sap.cms.ui.wl.Custom1.importQueue(Custom1.java:1169)
at com.sap.cms.ui.wl.wdp.InternalCustom1.importQueue(InternalCustom1.java:2162)
at com.sap.cms.ui.wl.Worklist.onActionImportQueue(Worklist.java:880)
at com.sap.cms.ui.wl.wdp.InternalWorklist.wdInvokeEventHandler(InternalWorklist.java:2338)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:422)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:133)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:344)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:298)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:705)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:659)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:227)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:150)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:56)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:47)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Info:Step CBS-make ended with result 'fatal error' ,stopping execution at 2009-10-14 02:16:28.0296 +5:00 -
Why view have no stored data ? And what is the reason view take more time
Why view have no stored data ? And what is the reason view take more time to query ?
what happen if a view have stored data?user12941450 wrote:
I want to know the reason that why querying view is slower then querying a normal table?..Untrue.
For example take a table with 2laks record and a view for that table.
If i make a query like( Select name,address from table) then it works fast then select(name,address)from view..Incorrectly interpreting the results.
A view is a SQL statement. Only difference is that the SQL statement is stored in the database's dictionary. Let's consider the following view:
create or replace view foo_view as select * from empWhen you use the view as follows:
select * from foo_viewOracle sees it as follows:
select * from (select * from emp)This is no slower, or no faster, than providing the following SQL to Oracle:
select * from empSo if you observe a difference in performance between using plain SQL versus using that same SQL via a view, there are other reasons for that difference in performance. The reason is NOT that views are slower. -
Hi all
I want to fetch just twenty thousands records from table. My query take more time to fetch twenty thousands records. I post my working query, Could you correct the query for me. thanks in advance.
Query
select
b.Concatenated_account Account,
b.Account_description description,
SUM(case when(Bl.ACTUAL_FLAG='B') then
((NVL(Bl.PERIOD_NET_DR, 0)- NVL(Bl.PERIOD_NET_CR, 0)) + (NVL(Bl.PROJECT_TO_DATE_DR, 0)- NVL(Bl.PROJECT_TO_DATE_CR, 0)))end) "Budget_2011"
from
gl_balances Bl,
gl_code_combinations GCC,
psb_ws_line_balances_i b ,
gl_budget_versions bv,
gl_budgets_v gv
where
b.CODE_COMBINATION_ID=gcc.CODE_COMBINATION_ID and bl.CODE_COMBINATION_ID=gcc.CODE_COMBINATION_ID and
bl.budget_version_id =bv.BUDGET_VERSION_ID and gv.budget_version_id= bv.budget_version_id
and gv.latest_opened_year in (select latest_opened_year-3 from gl_budgets_v where latest_opened_year=:BUDGET_YEAR )
group by b.Concatenated_account ,b.Account_descriptionHi,
If this question is related to SQL then please post in SQL forum.
Otherwise provide more information how this sql is being used and do you want to tune the SQL or the way it fetches the information from DB and display in OAF.
Regards,
Sandeep M. -
'BAPI_GOODSMVT_CREATE' takes more time for creating material document for the 1st time
Hi Experts,
I am doing goods movement using BAPI_GOODSMVT_CREATE in my custom code.
Then there is some functional configuration such that, material documents and TR and TO are getting created.
Now I need to get TO and TR numbers from LTAK table passing material documnt number and year, which I got from above used BAPI.
The problem I am facing is very strange.
Only for the 1st time, I am not finding TR and TO values in LTAK table. And subsequent runs I get entries in LTAK in there is a wait time of 5 seconds after bapi call.
I have found 'BAPI_GOODSMVT_CREATE' takes more time for creating material document with similar issue, but no solution or explanation.
Note 838036 says something similar, but it seems obsolete.
Kindly share your expertise and opinions.
Thanks,
AnilHi,
please check if some of following OSS notes are not valid for your problem:
[Note 838036 - AFS: Performance issues during GR with ref. to PO|https://service.sap.com/sap/support/notes/838036]
[Note 391142 - Performance: Goods receipt for inbound delivery|https://service.sap.com/sap/support/notes/391142]
[Note 1414418 - Goods receipt for customer returns: Various corrections|https://service.sap.com/sap/support/notes/1414418]
The other idea is not to commit each call, but executing commit of packages e.g. after 1000 BAPI calls.
But otherwise, I am afraid you can not do a lot about performance of standard BAPI. Maybe there is some customer enhancement which is taking too long inside the BAPI, but this has to be analysed by you. To analyse performance, just execute your program via tr. SE30.
Regards
Adrian -
How to stop the sap crm search in the middle if it takes more time
Hi,
We are in SAP CRM 7.0 EHP1.
In webui, if we search for any customer, product, contact, transactions and the volume of results list is more, system takes more time to diplay it in results list and till that time wheel spins. If user decides to stop the search, the only option they have is logoff or F5 which will take to new session.
But I came to know in EHP1, options are there to stop the search manually and proceed with other transactions/search in the same session.If any one knows this, pl share the details.
Regards
SureshHello,
This functionality was recently introduced by the following note:
https://service.sap.com/sap/support/notes/2044841
Regards
Joaquin -
DELETE FROM database table takes more time...
Hi Friends,
The below statement takes more time.
LOOP AT i_final.
DELETE FROM zcisconec WHERE werks = i_final-werks
AND aufnr = i_final-aufnr
AND vornr = i_final-vornr.
ENDLOOP.
Internal table I_FINAL will have more than 80,000 records.
DB Table zcisconec have 4 primary key fields out of 10 fields.
Below 4 fields are primary key fields
WERKS
AUFNR
VORNR
MATNR
Please guide me..How to optimize it?
Regards,
VijiHI,
Check this one ,
put a break point on that delete statement and add another line of code after, like .... CHECK SY-SUBRC = 0. Now got to debug and stop at the DELETE statement, check the number of records in your DB table, now hit F5 to step to the next statement, now go back to SE16 and refresh, do you see the number change? It should.........if you are selecting the data correctly, make sure that you are getting data into the IT_ table.
DELETE zcisconec from i_final.
CALL FUNCTION 'DB_COMMIT'.
Regards,
Ansari.
Edited by: Ansari Samsudeen on Sep 15, 2009 8:14 AM -
How the implementation differs between BW and BI , Is BI takes more time fo
Hi All,
I would like to know difference between implemenation and time lines for MM as mentioned below.
How the implementation differs between BW and BI , Is BI takes more time for implementing MM module than on BW?
Thanks in advanced. (Full points will be awarded)
With Regards,
PCRHi Timo,
Thanks for response!
But as i read from the following url: http://docs.oracle.com/cd/E15051_01/apirefs.1111/e10653/oracle/jbo/ViewObject.html, the setQueryTimeOut(int timeOutMills), the timeOut is mentioned in milliseconds. Please correct me if I am wrong.
and i have overriden the executeQuery() method in the View Object Impl class as shown below:
public void executeQuery() {
Map sessionScope = ADFContext.getCurrent().getSessionScope();
sessionScope.put("MyQuery", this);
try {
super.executeQuery();
} finally {
sessionScope.remove("MyQuery");
throw new JboException("Query Taking too long to respond");
and in the JAVA class i am calling the above method like this:
monitor.setQueryTimeOut(6);
monitor.executeQuery();
But the issue is:
1. The above exception message is getting carried forward to other pages as well. I mean somewhere in the session/ADFContext this message is being saved and error comes up/pops up when i click on other tabs of the page. How do i clear this?
2. The above exception message is coming for the first time but when i click the 'Submit' button second time, i am getting the results and also the message that 'Query is taking too long to respond'. This should not be the case, everytime it should show the same message as the timeout limit is less and the query should end without fetching the results.
Kindly let me know how to resolve the above issues, any pointers will be helpful.
Thanks in advance.
Edited by: user9223904 on Nov 3, 2012 4:42 AM -
When i put my Mac for sleep it takes more time than normal (>20 secs). Sometimes, coming back from sleep the system is not responding (freeze).
Perform SMC and NVRAM resets:
http://support.apple.com/en-us/HT201295
http://support.apple.com/en-us/HT204063
The try a safe boot:
http://support.apple.com/en-us/HT201262
Any change?
Ciao. -
Optimizing the query - which takes more time
Hi,
Am having a query which was returning the results pretty fast one week back but now the same query takes more time to respond, nothing much changed in the table data, what could be the problem. Am using IN in the where clause, whether that could be an issue? if so what is the best method of rewriting the query.
SELECT RI.RESOURCE_NAME,TR.MSISDN,MAX(TR.ADDRESS1_GOOGLE) KEEP(DENSE_RANK LAST ORDER BY TR.MSG_DATE_INFO) ADDRESS1_GOOGLE,
MAX(TR.TIME_STAMP) MSG_DATE_INFO FROM TRACKING_REPORT TR, RESOURCE_INFO RI
WHERE TR.MSISDN IN ( SELECT MSISDN FROM RESOURCE_INFO WHERE GROUP_ID ='4'
AND COM_ID='12') AND RI.MSISDN = TR.MSISDN
GROUP BY RI.RESOURCE_NAME,TR.MSISDN ORDER BY MSG_DATE_INFO DESCHi
i have followed this link http://www.lorentzcenter.nl/awcourse/oracle/server.920/a96533/sqltrace.htm in enabling the trace and found out the following trace output, can you explain the problem here and its remedial action pls.
SELECT RI.RESOURCE_NAME,TR.MSISDN,MAX(TR.ADDRESS1_GOOGLE) KEEP(DENSE_RANK
LAST ORDER BY TR.MSG_DATE_INFO) ADDRESS1_GOOGLE, MAX(TR.TIME_STAMP)
MSG_DATE_INFO
FROM
TRACKING_REPORT TR, RESOURCE_INFO RI WHERE RI.GROUP_ID ='426' AND
RI.COM_ID='122' AND RI.MSISDN = TR.MSISDN GROUP BY RI.RESOURCE_NAME,
TR.MSISDN
call count cpu elapsed disk query current rows
Parse 1 0.01 0.02 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 6 13.69 389.03 81747 280722 0 72
total 8 13.70 389.05 81747 280722 0 72
Misses in library cache during parse: 1
Optimizer goal: CHOOSE
Parsing user id: 281
Rows Row Source Operation
72 SORT GROUP BY
276558 NESTED LOOPS
79 TABLE ACCESS FULL RESOURCE_INFO
276558 TABLE ACCESS BY INDEX ROWID TRACKING_REPORT
276558 INDEX RANGE SCAN TR_INDX_ON_MSISDN_TIME (object id 60507)
********************************************************************************and the plan_table output is
STATEMENT_ID TIMESTAMP REMARKS OPERATION OPTIONS OBJECT_NODE OBJECT_OWNER OBJECT_NAME OBJECT_INSTANCE OBJECT_TYPE OPTIMIZER SEARCH_COLUMNS ID PARENT_ID POSITION COST CARDINALITY BYTES OTHER_TAG PARTITION_START PARTITION_STOP PARTITION_ID OTHER DISTRIBUTION CPU_COST IO_COST TEMP_SPACE ACCESS_PREDICATES FILTER_PREDICATES
23-Mar-11 23:36:45 SELECT STATEMENT CHOOSE 0 115 115 1058 111090 115
23-Mar-11 23:36:45 SORT GROUP BY 1 0 1 115 1058 111090 115
23-Mar-11 23:36:45 NESTED LOOPS 2 1 1 9 4603 483315 9
23-Mar-11 23:36:45 TABLE ACCESS FULL BSNL_RTMS RESOURCE_INFO 2 ANALYZED 3 2 1 8 1 30 8 "RI"."GROUP_ID"=426 AND "RI"."COM_ID"='122'
23-Mar-11 23:36:45 TABLE ACCESS BY INDEX ROWID BSNL_RTMS TRACKING_REPORT 1 ANALYZED 4 2 2 1 3293 246975 1
23-Mar-11 23:36:45 INDEX RANGE SCAN BSNL_RTMS TR_INDX_ON_MSISDN_TIME NON-UNIQUE 1 5 4 1 1 3293 1 "RI"."MSISDN"="TR"."MSISDN"
Maybe you are looking for
-
Images printing too small using Lightroom
I have an image that is 316x x 2317 pixels that I am printing using Lightroom 2.3 on Windows XP SP2. I use the Picture Package and add one 4x6 image to the sheet. I am using the Maximize template from the browser. The photo borders are minimum. The i
-
Unable to connect to local database
I am running 8.1.7 and iSQL*Plus on one machine (duh). I am able to login to remote databases via isqlplus but cannot seem to login to the very database that was installed in order to get the isqlplus working, the one on the same machine. Do I need t
-
Can't get videos to work in iTunes(OR QuickTime)
I have the latest version of iTunes, and I can't seem to get any videos to play. .mp4, .m4v, .mov, or .avi. I've been encoding using SUPERs iPod setting, and trying a few settings I found on google. These are SUPERs settings: Container - mp4 Video Co
-
Why exporting eps from InDesign isn't working?
I'm trying to export a brochure cover from InDesign as an eps to open in PhotoShop (to create web image). The eps won't open in PhotoShop. I've also tried exporting the cover page as a jpeg. This will not open in PhotoShop either. The message says it
-
Whats is Recovered file in trash ?
For some reasson my trash (folder)? keeps putting after some time a folder named recovered files and inside something else.I dont know whats going on with it if i had delete it it come back some time later.pls help me i dont know what to do.NOTE:i ha