'BAPI_GOODSMVT_CREATE' takes more time for creating material document for the 1st time

Hi Experts,
I am doing goods movement using BAPI_GOODSMVT_CREATE in my custom code.
Then there is some functional configuration such that, material documents and TR and TO are getting created.
Now I need to get TO and TR numbers from LTAK table passing material documnt number and year, which I got from above used BAPI.
The problem I am facing is very strange.
Only for the 1st time, I am not finding TR and TO values in LTAK table. And subsequent runs I get entries in LTAK in there is a wait time of 5 seconds after bapi call.
I have found 'BAPI_GOODSMVT_CREATE' takes more time for creating material document with similar issue, but no solution or explanation.
Note 838036 says something similar, but it seems obsolete.
Kindly share your expertise and opinions.
Thanks,
Anil

Hi,
please check if some of following OSS notes are not valid for your problem:
[Note 838036 - AFS: Performance issues during GR with ref. to PO|https://service.sap.com/sap/support/notes/838036]
[Note 391142 - Performance: Goods receipt for inbound delivery|https://service.sap.com/sap/support/notes/391142]
[Note 1414418 - Goods receipt for customer returns: Various corrections|https://service.sap.com/sap/support/notes/1414418]
The other idea is not to commit each call, but executing commit of packages e.g. after 1000 BAPI calls.
But otherwise, I am afraid you can not do a lot about performance of standard BAPI. Maybe there is some customer enhancement which is taking too long inside the BAPI, but this has to be analysed by you. To analyse performance, just execute your program via tr. SE30.
Regards
Adrian

Similar Messages

'BAPI_GOODSMVT_CREATE' takes more time for creating material document

Hi Experts,
I m using 'BAPI_GOODSMVT_CREATE' in my custom report, it takes more time for creating Material documents.
Please let me know if there is any option to overcome this issue.
Thanks in advance
Regards,
Leo

Hi,
please check if some of following OSS notes are not valid for your problem:
[Note 838036 - AFS: Performance issues during GR with ref. to PO|https://service.sap.com/sap/support/notes/838036]
[Note 391142 - Performance: Goods receipt for inbound delivery|https://service.sap.com/sap/support/notes/391142]
[Note 1414418 - Goods receipt for customer returns: Various corrections|https://service.sap.com/sap/support/notes/1414418]
The other idea is not to commit each call, but executing commit of packages e.g. after 1000 BAPI calls.
But otherwise, I am afraid you can not do a lot about performance of standard BAPI. Maybe there is some customer enhancement which is taking too long inside the BAPI, but this has to be analysed by you. To analyse performance, just execute your program via tr. SE30.
Regards
Adrian

EVERYtime I click "send" or "get Mail", I have to click twice. The 1st time with "send" produces an error, the 1st time with "get mail", nothing happens.

I have to select "send" or "get mail" twice in order for Thunderbird to do what I want. When I click the 1st time when sending, I ALWAYS get an authentication error. I click again and it sends the message without error. When I click "get mail" nothing happens. When I click it again, it checks & retrieves mail.

That sounds like an anti virus issue.
Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX] and see if the double clicking stops.

User exit for different Material Document for different company code

Hi,
We want to have different no. range for Material document (GR) for different compnay code. Presently we have no. range at client level. Can we do with any userexit. If so pls. give the details.
Regards
Sai Krishna

[user exit for generating external serial;
[BADI MB_DOCUMENT_BADI;
[user exit or any other enhancements during good receipt;

Multiple Posting change notice created for one material document

Hi All,
The scenario is that the user needs to transfer material from unrestricted to quality stock type. while doing so the storage type is different than the actual storage type for the material. Meaning if the material is normally stored in high rack storage type, when it is found that the material is damaged or expired it need to be moved to the quality storage type. For this the user will first create material document in IM with movement type 322 transferring material from unrestricted stock to qualtiy stock. A PCN will be created in back ground which will in turn be converted manually by the user to a TO. while doing so the user will pick the quant manually from the required storage type and select the destination storage type as the quality or quanranntine area.
The issue here is that system creates one PCN for each material document line item. The requirement is that the system should create only one PCN with multiple lines for one Material document.
The setting in the movememnt type clearly says that it will behave as it is behaving.
Is there any other way or setting by which we can create one PCN with multiple line items for a material document.
Would look forward to your replies.
Regards,
Jeetendra

Thanks and Sorry for the delayed reply. We have now convinced the users that the system behaviour is standard and we cannot change the same.
To your question about the need to have one PCN with multiple lines please note that the setup is such that when material document is created for transferring material from unrestricted to quality and vice versa this document is created with multiple materials in one go. Now when the PCN is to be converted to TO then the user ends up in creating number of TO's equal to the number of lines in the Material Document. We wanted to avoid this and hence this was posted in SDN.

BAPI for create material master (SAP version 40b)

Hi,
Anyone know BAPI for create material master for SAP version 40b?
There's no BAPI_MATERIAL_SAVEDATA.
I try to use BAPI_MATERIAL_MAINTAINDATA_RT,
but seems that BAPI only for retail.
Kindly advice!
Thanks,
Victor.

Hi,
    this one works pretty good.
call function 'MATERIAL_MAINTAIN_DARK'
         exporting
              sperrmodus                = ' '
              kz_prf                    = 'W'
              max_errors                = ' '
              p_kz_no_warn              = 'X'
              kz_verw                   = 'X'
              kz_aend                   = 'X'
              kz_dispo                  = 'X'
              kz_test                   = ' '
              flag_muss_pruefen         = ' '
              call_mode                 = 'ACT'
         importing
              number_errors_transaction = numerror
              matnr_last     = last_matnr
         tables
             amara_ueb      = i_mara    "Basic Data
            amakt_ueb      = i_makt    "Descriptions
             amarc_ueb      = i_marc    "Plant
            amard_ueb      = i_mard    "Storage Location
           AMFHM_UEB      = I_MFHM    "Production Tools
            amarm_ueb      = i_marm    "Units of Measure
           AMEA1_UEB      = I_MEA1    "Internal Mangagement - EANs
            ambew_ueb      = i_mbew    "Accounting/Costing
            asteu_ueb      = i_steu    "Tax Data
            astmm_ueb      = i_steumm "Tax Data
           AMLGN_UEB      = I_MLGN    "Warehouse Data
           AMLGT_UEB      = I_MLGT    "Storage Type Data
           AMPGD_UEB      = I_MPGD    "Change Documents
           AMPOP_UEB      = I_MPOP    "Forcast Parameters
           AMVEG_UEB      = I_MVEG    "Total Consumption Data
           AMVEU_UEB      = I_MVEU    "Unplanned Consumption Data
            amvke_ueb      = i_mvke    "Sales Data
            altx1_ueb      = i_ltx1    "Sales Text
           AMPRW_UEB      = I_MPRW    "Forcast Values
             amfieldres     = i_delfields
             amerrdat       = i_errors
         exceptions
              kstatus_empty             = 01
              tkstatus_empty            = 02
              t130m_error               = 03
              internal_error            = 04
              update_error              = 05
              too_many_errors           = 06.
Otherwise try BAPI_RETAILMATERIAL_CREATE
BAPI_STANDARDMATERIAL_CREATE
<b>Reward points</b>
Regards

How to create matreial document for ten line items (10 documents) by BAPI

Hi
how to create matreial document for ten line items (10 documents) by BAPI_goodsmvt_create
i created but it gives error as "no ites were transferre
and i need code also.
thanks in advance

Prabhu Peram wrote:>
> >
Gareth @ Atos Origin UK wrote:
> > Prabhu,
> >
> > You have been on SDN a long time and have a decent amount of points - why do you feel the need to simply cut and paste standard SAP documentation? _-----> I least bother abt the Points, and i never ask somebody to give points to me , if u have any doubt on it , u can check all my postings ? All it does is fill up the SDN servers with replicated data which the original poster could quite easily access themselves via SE37----> Sorry I have seen ur Posting/Reply,dont assume that i do copy & paste for sake of Points.Njoy SAP.>
> > Gareth.
>
>
>
> regards
> Prabhu
Prabhu.
I didn't question you about points at all - I was making the point that you have been on SDN a long time and have a lot of points. Therefore you should know better than to simply cut and paste standard SAP help. If you don't copy and paste for sake of points, what do you do it for? It serves no purpose other than to fill up the servers here on SDN. The original poster appears to have access to a SAP system and SE37 and wants to know how to call a BAPI - they can easily go to SE37 and read the documentation themselves. Posting it here just adds noise and makes searching harder, as well as taking up more and more space on SDN servers.
Gareth.

Create delivery document for line item 5 only manually

Hi Sap Experts,
We have scenario, we have created sales order with 10 line items while creating delivery we don’t want to show all the 10 line item to delivery creator (creating delivery manually).
We will send him mail saying that create delivery document for line item 5 and we will provide him material number and delivery date and shipping point with sales order number.
We don’t want to use partial delivery option that split the delivery and we don’t want to use VL10C tcode also.
What are options we have and how to customize this scenario?
Kindly suggest.
Regards,
Kotli

Can you be clear in your requirement?
One requirement is user should not select line items other than the one instructed to them
The other requirement is delivery split should happen based on item category
If your requirement is first one, you need to go with user exit USEREXIT_MOVE_FIELD_TO_LIPS in include MV50AFZ1 but I am not sure, on what logic, coding to be included in this exit. If your requirement is second one, then just try in your system and share the outcome how system is functioning. You will come to know how standard SAP works.
G. Lakshmipathi

Does anyone knows a way to work with various Pages documents at the same time, for example with a system of tabs to switch directly from one document to the other?

Hello everyone,
Working with numerous Apple Pages documents at the same time, I am looking for an efficient solution to switch faster from one document to the other. Integrating all them in a single framework, for exemple by switching from one to the other with a system of tabs would be of great help. Does anyone knows if such a possibility exists?
Thanks in advance,
Jean-Baptiste

jbp- wrote:
Thanks. It works and is very efficient. Not as much as a real system of tabs, but is allows to switch very fast between different documents. Only regret I would have is that it doesn't work with a document which is on full page mode. But that's already very helpful!
You're very welcome but Peggy really gave you the answer already.
With regard to the full screen apps, I don't think Apple have yet worked out how to make them elegantly coexist with other apps. The closest you can get is the four finger swipe gestures you may use on a trackpad if you have one (Mission Control and App Exposé).
In fact nowadays I use the App Exposé (four finger swipe down gesture) more often than I use Command-Accent to move between documents in the same app (when not in full screen). It also as the advantage of showing you thumbnails of recently opened documents below the ones already open within the app. If you haven't tried it, I suggest you give it a whirl.
I can't remember now but I think the four finger gestures are not enabled by default and you must switch them on in System Preferences > Trackpad > More Gestures.

Material Documents for Unplanned Services?

Dear All
I have created a service entry sheet for services against a PO. In the PO, provision was maintained for unplanned service (maintaining some amount in limits.)
Now, while creating service entry sheet, it has been observed that material document created against planned service only. Although the cost of unplanned service is appearing in services entry sheet but no material document created against unplanned service. The payment section is therefore not allowing payment against unplanned services as no material document appearing in PO history against unplanned service.
Can any one help me out what is the solution.
Regards,
Abdullah

Hi all,
For dispaly of Material Document we have Transaction Code : MB03,
this with the Document No & Year,
like wise for dispaly of Material Document for a date range i want to know the Tranasction Code.
Thanks

What is the tcode for creating material receipt

Hi,
what is the tcode for creating material receipt & payment to the vendor

Hi,
You recieve your material from the vendor and do a Goods Reciept in MIGO with mvt 101. You can even enter via T-Code - MB1C.
Once you get your Invoice for this reciept from your vendor, you then do invoice verification in MIRO.
After verification, if there is no blocking of the invoices and is posted and released, a accounting document is released during the posting of MIRO. These documents are then referred by FI pals, who are responsible for the payment.
Hope this gives you a clear picture.
Anand
Message was edited by:
Anand.B.K.

Program does not create PCP0 documents for TMS Idocs

Hi All,
We have a dialy job that will catch up all payroll/tms idocs that is being received by the system. The program will automatically creates a document in the tcode PCP0 for every idocs that it has gathered both Idocs that have no errors and Idocs that have errors. Would like to ask if you have experienced the cause of this?
Regards,
S. T.

Hi wyo3witt,
I checked your account and saw that your subscription had been canceled, but that you hadn't been refunded yet. I processed a refund for you (transaction ID 0066152640); you see it in your account in 2-3 days.
Best,
Sara

COPA document is not visible for a material document ?? Why

Hi Experts,
We have a material document, for which we have accounting doc and CO document respectively. But we don't have a PA document(not Visible). Any Idea why it is not visible.
Moderator: Please do not ask basic questions

Hi ,
I am really very much appreciate your cooperation for the issue.
When i try the same through KE4S in test run system is showing the below lines.....
Number of billing documents read:                        1
Number of line items to be transferred:                  0
No. of billing doc. items already transferred:           0
Number of billing docs with errors:                      0
Note:- Number of line items to be transfered 0 then there is nothing to transfer to COPA.
Please suggest.

Function Module to know the Acc doc no for a Material document.

Dear Friends,
What is the Function Module to know the Acc doc no for a Material document? Please help. Thanks in advance.
Regards,
RAMAN

Hi Raman,
I am not sure about your requirement,
But i remember when i required the same like you i went to vrpma table to get the account document,
I just did like a blind fold,
as my company does all the billing accounts in the same month, my search criteria was blind.
Also try with MKPF-XBLNR with the VBRK-XBLNR and get VBRK-VBELN
from there goto BSEG.
Thansk & regards,
Dileep .C

Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

As long as the profiles are different (ex. HID vs AD2P) you will not have any issues. But say if you try to use 2 keyboards at once, it won't work. Or 2 headsets at once. Your scenario seems fine.

'BAPI_GOODSMVT_CREATE' takes more time for creating material document for the 1st time

Similar Messages

Maybe you are looking for