Talent profile iView - how to change assignment records on "Resume" tab

in the standard MSS iview Talent Profile, on tab "resume-Internal work experience", multiple (historical) assignment records are displayed. I have a requirement to display only one (the most recent) assignment record.
how can I do that? is there a badi I can use for that? can I do this without WebDynpro ABAP enhancement?
T.
Edited by: Tiberiu Sasu on Nov 23, 2010 1:23 PM

it will require enhacement
CL_HRTMC_AC_WORKEXP_INTERNAL
GET_ASSIGNMENTS
CL_HRTMC_AC_WORKEXP_INTERNAL

Similar Messages

  • How to change the text of customer tab in Me23n

    Hi
    I have added new customer tab in Me23n at item level.
    Its text is Customer Data.
    I would like to change to some other text.
    How to change the text of customer tab in Me23n
    Regards
    Amruta

    Amruta,
    I had the same query today and finally found the answer.
    In order to change the title text or description of the "Customer Data" tab in ME23N, etc. you need to define a new text symbol in program SAPLXM06. The text symbol must be number 111 for the PO data. Make sure you define this text symbol in the language you are using when viewing the PO. I had issues with this as the original language of object SAPXM06 is not my logon language.
    The standard code which picks up this text is in function module MEGUI_BUILD_PO_ITEM_PLUGIN. I could not find any documentation around this functionality.
    Hope this helps!
    Ben

  • How to change the order of the tabs in featured news?

    Hi,
      I use the 'Featured News' widget on my company website and it has 10 tabs. The newest item is at the top but when I add a new tab it goes to the bottom and I can find no way of changing the order of the tabs so that everytime I add new news I have to copy each tab and it's content down one place in order to get an empty tab at the top to put the new news item in. This takes an unneccesssarily long period of time. Can someone please let me know if there is an easy way to change the order of the tabs?
      Thanks very much ;0)
            Justine

    Just click on the title tab until it is isolated (one click before the text is highlighted) and move the tab to the position you want.
    Thanks for your reply. I've done this in the past but found that the position of the tab in terms of it's place in the hierachy doesn't change so if I move the top tab down one, the way you've described and then upload the page I find that the second tab down (which was the first previously) displays first. How can I change the 'position of the tabs interms of their hierachy in the widget?
      Thanks again
         J

  • How to change text of Customer Data tab in ME21N

    Hi all,
    I have implemented the screen exit for Tcode ME21N, as a result of which another tab has appeared inthe item level by the text CUSTOMER DATA. Now i want to change the text of this tab?
    Can any one suggest me how canthis be done?
    Regards
    Sabah

    Hi,
    Go to SE38 -> SAPLXM06 ->Display ->GoTo ->Text Elements ->Text Symbols
    and insert the required custom name for the tab and the SYM value should be equal to the screen number which you are adding.
    For E.g. adding a new tab in purchase order item , we have to add the text element with the SYM = 111 and the text as per the requirement at the above location.
    Save & Activate the changes.
    Please Note that we have to click on "Maintain Changes In Logon Language" , i.e. we have to make and save these chagnes in EN language only.
    Regards,
    Praveen

  • How to change theme without losing parental tabs?

    Hi
    I want to change the theme of my application from 5 - business to 7 - Centered.
    After the change I lose the parental tabs..
    how can i change the theme without losing the tabs?
    before:
    http://img224.imageshack.us/img224/6712/beforewz6.jpg
    after:
    http://img292.imageshack.us/img292/4337/aftereu1.jpg

    Change ownership as in change the iPad's name (like from John's iPad to Mary's iPad)? For that just go to Settings > General > About and then tap on the box that says 'Name'.
    If you're looking to change the default Apple ID login, while in the App Store scroll all the way down and tap on the box that has your Apple ID login info. Then choose to sign out. Afterward, scroll back down and select Sign In. By doing this keep in mind that any updates for apps that you downloaded with your Apple ID will require you to sign in to yours to receive the updates.

  • How to change the font size from tabs ???

    Hi
    I found a tip to change the CSS in the apache directory in the forum here.
    but i can´t find the directory on my hard disk/oracle directory
    i got this version installed:
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
    PL/SQL Release 10.2.0.1.0 - Production
    CORE 10.2.0.1.0 Production
    can i change the font size of tabs/regions etc in any other way??

    Hi,
    The font size is defined by the style class used for the tab cells (tabs are normally created as cells in a table).
    To do this, the simplest solution may be to edit the page template:
    1 - Go to Shared Components/Templates
    2 - Select the page template(s) that you are using (you will have to do this for each template that you've used that uses tabs)
    3 - Scroll down to "Standard Tab Attributes" - you'll see two sections: Current Tab and Non Current Standard Tab.
    In Current Tab, you'll have something like:
    <a href="#TAB_LINK#" class="t12standardtabcurrent">#TAB_LABEL#</a>
    In Non Current Standard Tab, you'll have something like:
    <a href="#TAB_LINK#" class="t12standardtabnoncurrent">#TAB_LABEL#</a>
    After the class="...." attribute add in style="font-size:12px" (use whatever px value you want)
    4 - You should repeat the process for Current Parent Tab and Non Current Parent Tab as these contain the same settings
    5 - Apply your changes
    Regards
    Andy

  • How to change the name of the tab control window?

    Dear all,
    Is there any way to change the name of the tab control page programatically?
    Thanks,
    Ritesh

    Hi Ritesh,
    yes it´s possible, see this link.
    Mike

  • How to change a recording with only L-channel to make it both L channel & R channel ?

    Hi there,
    I made a mistake during the recording. I selected the Input Source as Stereo 1/2 instead of Mono 1
    I only realised it half way thru the recording and by then there was not enough time to re-record the whole thing.
    So, I ended up with the tracks only having voice coming out from the L channel. How do I rectify this to make the same voice coming out from both the L channel and R channel ?
    Thanks

    is the click on a stereo channel?
    or are you sending it to a stereo bus or something?
    For the Pan Law you can access it in Recording settings>
    click hold the Record button on the transport and select recording,or via the KC .
    But the Pan Law refers to mono signals and has to do with the amount of volume they have when they are panned in the center.
    You can check more on that on >New Features in Logic 7.2<if you have this version of Logic

  • How to change assignment to a midi port?

    I've just uninstalled Automap by Novation (using their own uninstaller) but I'm still getting slightly annoying messages on starting Logic 9 which tell me that:
    Device 'Automap Mixer' is assigned to Midi Port 'Automap Logic Mixer' which is not present.
    It's only mildy annoying but I'd love get shot of this message for good.
    Any suggestions?
    (I reset all Midi Drivers, which didn't solve it, also poked around in the Environment without finding any obvious clues.)
    Thankz in advance
    Byz

    Hi byzantine,
    As long as you're not using Automap for Logic Mixer control, you can get rid of this message by going to Preferences > Control Surfaces Setup.  Click on the Automap Mixer icon on the right side of the window, then go to Edit > Delete.
    Best regards,
    David Tichauer // Novation Technical Support

  • How to change the background of new tab

    the background of the new tabs is white. i want to change it to the picture of my persona. is that possibles !!?? if yes than how?
    if not than why not!?

    Where is the image file located?
    Can you post the full content of the code that you used?
    Did you use Stylish or placed the code in userChrome.css file below the default @namespace line?
    *http://kb.mozillazine.org/userChrome.css
    The customization files userChrome.css (interface) and userContent.css (websites) are located in the chrome folder in the user profile folder.
    *http://kb.mozillazine.org/Editing_configuration
    @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    /* Set a wallpaper for the about:newtab page*/
    @-moz-document url("about:newtab") {
    #newtab-scrollbox{
    background: url("file:///c:/machu.jpg") no-repeat !important ;
    background-size: 100% !important;
    }

  • How to change location information under metadata tab?

    When I use the search box under the Places icon to assign a location to a photo, sometimes Aperture places a pin near but not directly on the place I have identified and puts an incorrect location in the tag.  If I zoom in, I can accurately place the pin, and the tag then changes to the correct location.  The problem is that both correct and incorrect locations display in the location box in the metadata field.  I've tried completely eliminating the incorrect location with Manage my Places.  I've tried removing the location from the photo and starting again.  In both cases, both original locations remain in the location box under the Metadata tab.  This makes using the search function for places worthless since there are so many false hits.
    Is there anyway to modify the location box under the metadata tab once in contains inaccurate information?

    I tried inserting a screen shot here, but I got a message that said "The content type of this image is not allowed."  Let me see if I can explain more clearly.
    To assign places, I have begun by clicking on the Places icon on the upper right hand side of the screen where the choices are Browser, Split View, Viewer, Faces, Places, Loupe, Full Screen.  When I click on Places, I get a search box where I put the place I want to assign to a photo.  Sometimes, when I see the location I want in the search results and click on Assign, Aperture puts a pin close to the desired location (but not exactly on it) and gives it a random place name (not the one I chose).  If I zoom in and put the pin exactly where I want it, the place name changes to the one that I searched for to begin with.  So far so good.
    On the left hand column of the screen, there are three tabs at the top of the column - Library, Metadata, and Adjustments.  If I click on the Metadata Inspector and look at the Location box at the bottom of that screen for the photo I've just described above, I see two locations listed - the first incorrect place name as well as the correct location that I changed it to when I moved the pin.
    I've tried three things unsuccessfully to get around this problem.
      In the Metadata drop-down menu, I've used Manage Your Places to delete the wrong location altogether.  It disappears from my list of locations there, but it remains in the Location box for the in individual picture in the Metadata Inspector.  From the Action pop-up menu (the gear icon) for the individual photo in the Metadata Inspector, I've chosen Location Name and selected the single name that I want.  Both names remain in the Location box.  I've had a One-on-One session at the Apple Store.  (I took my computer with me so that she would see exactly what I was talking about.)  The woman there told me that she thinks that this is a bug, and she doesn't know how to get around it.  It was she who recommended that I try the Apple Support Communities to see if anyone has solved this. 

  • How to Make Assignment field in Details Tab Mandatory in MIRO

    Hi Experts,
    I would like to know how to make the field "assignment" in Details tab of transaction MIRO as a Mandatory field, Give all the posible ways and their causes and effects.
    Thanks In advance.

    Hi,
    check the field statusgroup of the reconcilation account for your vendors and change thisfield status group for the field Assinment to Mandatory.
    But make sure that then all your endors haven an sort key in the master data.
    Regards,

  • How to change the text for the tabs of a tabstrip control dynamically

    Hi Guys,
        I am having two screens in a transaction.
    1. 1st screen has material number as an input and submit push button
    2. 2nd screen has two tabs in a tabstrip control.
        I want to display material description and plant number as heading for the two tabs based on the material number entered by the user in the 1st screen. Means i want to change the text dynamically. Is there any possible way? If it is there please help me. Very urgent...
    Thanks in advance
    James.

    Hi,
    If you set the "Output field" attribute for a pushbutton/tab, you can also set its text dynamically in the ABAP program. To do this, you must create a field in the ABAP program with the same name as the pushbutton/tab. You must then assign the required text to the field before the screen is displayed.
    For example define a global field in your program called MATNUM(20) and use this as the name for the material number tab on the tabstrip. Then you can assign a text MATNUM = 'Material Number' and this will appear as the tab title. Don;t forget to set the "Output field" attribute on the tab.
    Hope it helps

  • How to change content/stacked canvases to tabs

    Hi all,
    I have created a form which has one content canvas and multiple stacked canvases. The content canvas displays the first page and then we hv to click on next to go to the next stacked canvas and so on (I have about 10-12 canvases, 1 being content and the rest being stacked). I now want to make all those canvases as tab canvas so that it can be very easy going to any canvas. Right now, at runtime, if I'm on the 8th canvas and need to make some changes in the first canvas, I have to click on the back button all the way till I reach the first canvas. So I desperately need to change my canvases to tabs.
    Can you guys please give me a detailed instruction on how to convert my content and stacked canvases to tab canvases. I have never worked on tab canvas. I tried one, I changed one of my present stacked canvas to tab but all the fields and texts were gone and there were just two tabs in it.
    Please suggest. Thanks to all in advance.

    Thanks for replying. I just need to move the items to the new tab canvas but everything else would be the same, right. I mean, will I need to write new codes? Can you point me to any documentation on this. Thanks.

  • How to change content/stacked canvases to tab canvas

    Hi,
    I have created a form which has one content canvas and multiple stacked canvases. The content canvas displays the first page and then we hv to click on next to go to the next stacked canvas and so on. I want to try making it in tabs (tab canvas) and then I will decide which one looks better and performs good.
    Can you guys please give me a detailed instruction on how to convert my content and stacked canvases to tab canvases. I have never done tab canvas. I tried one, I changed one of my present stacked canvas to tab but all the fields and texts were gone and there were just two tabs in it.
    Please suggest. Thanks in advance.

    Might get a better response in the Forms forum...
    Forms

Maybe you are looking for