Tare function DAQ assist and restart function for the vi program

Hi!
I have a program that aquiers a signal from the DAQ assist. I have searched here on the forum and on the web, but I can't find a way to implement a tare function. The signal is from a loadcell and therby it would be good if Icould tare the signal to value zero. In the DAQ assist I can calibrate it manually, but i would like to wire this function to a button.
Also I have another problem that shouldn't be hard to solve, but I'm struggling with it. I want a resert function in my labview code so that i can restart the program from the begginging. I have used a case structure with normal and restart enum constant, and wierd them via a tunnel. But it dosn't seems to work. Instead of resetting the program it only stops it
I have attached my code below.
Best Regards Maurlind
Solved!
Go to Solution.
Attachments:
Tare function and restart.vi ‏365 KB

I solved my problem with the tare function, i used a case structure and shift register to store values in it. se picture below.
I haven't found a way to restart my VI yet. I tried to implement something from the community , see this link: https://decibel.ni.com/content/docs/DOC-4747
But that doesn't work for my VI and i don't know why. Could someone explain why doesn't work ?
My goal is to restart my whole VI with a press of a button.
Best Regards Maurlind
Attachments:
tare function.png ‏25 KB
restart vi.vi ‏488 KB

Similar Messages

Can I use a prepaid CC for the developer program?

Hello,
I have a few apps done now and I would like to sell them on in the app store.
I don't have a credit card (and can not get one) so I was wondering if it would be possible to get a prepaid credit card from my bank and use that for the developer programs payment and ID verification?

Yes you can use a prepaid credt card. It still has to be associated with the country in which you are located which must be the same counry as the iTunes store yu are using.

This just started happening.. I open Itunes and the little round rainbow loading indicator just goes on and doesnt stop.. My itunes wont function.. It gets stuck. Then i have to force quit.. I tried to shut down and restart. also reloaded the latest itune

This just started happening.. I open Itunes and the little round rainbow loading indicator just goes on and doesnt stop.. My itunes wont function.. It gets stuck. Then i have to force quit.. I tried to shut down and restart. also reloaded the latest itune 11.1.3 and it still gets stuck.
i use an external HD and thats fine.. all files are in there. But I have no idea why my itunes app is getting stuck.
Am I the only person this is happening to? What can I do to correct this problem?

Hi marlonbnyc!
This article will help provide some basic troubleshooting steps that will serve as a guide for you to resolve this issue:
Mac OS X: How to troubleshoot a software issue
http://support.apple.com/kb/ht1199
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

How to find function module's and tables used for the particulat screen or TCODE?

Hello Nation,
I would like to know how to find the function modules and tables used for the particular screen or TCODE or program.
Example : I would like know the function module used in the program RDBGFT?
How can i find that?
Thanks in advance ,Awaiting your reply.

Make use of Find function with the keyword "CALL FUNCTION".
Make use of the same find function with the keyword "Select" to know the database tables used.
Regards,
Philip.

[svn:bz-trunk] 20970: Add or enhance include functionality for the following configuration elements :

Revision: 20970
Revision: 20970
Author:   [email protected]
Date:     2011-03-25 14:26:37 -0700 (Fri, 25 Mar 2011)
Log Message:
Add or enhance include functionality for the following configuration elements:
- Adapters
- Channel definitions
- Security Constraints
- Destinations
- Services
The following elements are now allowed and can specify either the "file-path" attribute or the "directory-path" attribute.
The "directory-path" attribute references a directory of XML files (names ending in .xml) that will be treated as a sequence of include files.
Added unit tests for all the above.
Fixed a bug in the unit test code that was terminating the verification early.
Add the confirmation of the security constraints at the top level.
Updated the example config file with usage examples.
Modified Paths:
    blazeds/trunk/modules/common/src/flex/messaging/config/ClientConfigurationParser.java
    blazeds/trunk/modules/common/src/flex/messaging/config/ConfigurationConstants.java
    blazeds/trunk/modules/common/src/flex/messaging/errors.properties
    blazeds/trunk/modules/core/src/flex/messaging/config/SecuritySettings.java
    blazeds/trunk/modules/core/src/flex/messaging/config/ServerConfigurationParser.java
    blazeds/trunk/modules/core/test/src/flex/messaging/config/ConfigurationConfirmation.java
    blazeds/trunk/modules/core/test/src/flex/messaging/config/services/1c.xml
    blazeds/trunk/modules/core/test/src/flex/messaging/config/services/1e.xml
    blazeds/trunk/modules/core/test/src/flex/messaging/config/services/1e_destination_include .xml
    blazeds/trunk/modules/core/test/src/flex/messaging/config/services/1f_service_include.xml
    blazeds/trunk/modules/core/test/src/flex/messaging/config/services/Confirm1c.java
Added Paths:
    blazeds/trunk/modules/core/test/src/flex/messaging/config/services/1e_adapter_include.xml
    blazeds/trunk/modules/core/test/src/flex/messaging/config/services/1e_channel_include.xml
    blazeds/trunk/modules/core/test/src/flex/messaging/config/services/1e_constraint_include. xml
    blazeds/trunk/modules/core/test/src/flex/messaging/config/services/1i.xml
    blazeds/trunk/modules/core/test/src/flex/messaging/config/services/1j.xml
    blazeds/trunk/modules/core/test/src/flex/messaging/config/services/Confirm1i.java
    blazeds/trunk/modules/core/test/src/flex/messaging/config/services/Confirm1j.java

SDN is the place to discuss technical problems..
Please avoid such weird post.
G@urav.

Any solution to the iOS 6 bug for auto lock function for the iPhone 4S

Any solution to the iOS 6 bug for auto lock function for the iPhone 4S

My guess is they don't care. Most likely they're illiterate and don't know what a colon is for. They probably think it's a little-used character. Remember: these are the people who don't know the difference between "deprecate" and "depreciate".
I have the same colon problem as you do. But it's not the biggest problem I have encountered in Lion. If it was only that I'd be Mr. Delighted with Lion. There's worse than having a colon - uh - that won't cooperate. A lot worse, in Lion.

I purchased an additional audio function for the apps ＂baby monitor＂today, but this function didn't work on my ipad. Grateful if you would let me know how to refund the cost.

I purchased an additional audio function for the apps ＂baby monitor＂today， but this function didn't work on my ipad. Grateful if you would let me know how to refund the cost.

Refund
http://www.apple.com/emea/support/itunes/contact.html

Is there a call block function for the iPhone 4S?

Is there a call block function for the iPhone 4S? If not, will it be offered in the future? what else can I do to the phishing calls?

No.
Apple has not said.
Don't answer your phone.

Upgraded to LR5.7 and PS Elements 13. Using a SSD which is becoming Full! Can I remove older versions of these programs without affecting the functionality of the new programs?

Upgraded to LR5.7 and PS Elements 13. Using a Solid State Drive which is becoming Full! Can I remove older versions of these programs without affecting the functionality of the new programs?

Yes, there is no need to keep previous versions of software on the SSD (or on your computer).
Also, you didn't mention this but if the photos are on the SSD, you should move them off the SSD to a regular hard disk using these instructions: Adobe Lightroom - Find moved or missing files and folders

N73 - trouble with search function for the contact...

Hi, i just bought a N73 series phone. i noticed that N73 search function for the contact list is different from others standard. Normally, it should show the 1st contact of the 1st letter that i pressed instead of the contact contains the letter. I found difficulties to look for the contact unless i press 3 or 4 letters. is there any setting can be changed to order search function only search the contacts with the 1st letter that i pressed instead of the letter in middle of the contact?
For example:
ang on
office
when i pressed "o", the contact will search for "ang on" instead of "office" unless i press few more letters like "off".
hope to get some help from you guys.

I found the same problem as this with all my S60 3rd edition phones, what I have done is in my contacts put a hyphen (-)in between the name - i.e Joe Blogs would come us under searches for J & B, so try putting Joe-Bloggs, this way, the search will only come up with all the J's in your phone book directory.
Hope this helps, DLJ
DLJ

Is there a fix for Bluetooth failing after 1-2 hours of play on my remote audio speakers? It sounds like "gargling". It occurs with all bluetooth speakers and quitting and restarting bluetooth is the only remedy I've found. Others?

Is there a fix for Bluetooth failing after 1-2 hours of play on my remote audio speakers? It sounds like "gargling". It occurs with all bluetooth speakers and quitting and restarting bluetooth is the only remedy I've found. Others?

8-doing a factory reset, then repeating steps 1 through 6
Do you mean a restore to factory settings?. If so did you set up as new or restore from back up afterwards?

I have just upgraded my Ipad2 to the latest operating system and on restarting it is some foreign language and is asking for the sim card number when I don't have a sim card. What do I do?

I have just upgraded my Ipad2 to the latest operating system and on restarting it is some foreign language and is asking for the sim card number when I don't have a sim card. What do I do?

i have to apologize up front for the cheeky response. but i just couldnt resist. if your ipad is speaking in tongues. i would call a priest and perform an exorcism on it first.

My computer keeps restarting itself for the last two hours and i don't know what to do. Please help me

I need help, my MacBook Pro keeps restarting itself for the last two hours saying there's a problem. I can't get past the grey screen without it restarting and i don't know what to do...please help me

Reinstall Lion, Mountain Lion, or Mavericks
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
     Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu.
     Repair the Hard Drive and Permissions as follows.
After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
     Reinstall Lion/Mountain Lion, Mavericks: Select ReinstallLion/Mountain Lion, Mavericks from
     the Utilities menu, and click on the Continue button.
     Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                three times faster than wireless.

*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

Plant and Profit center wise Turnover and gross profit for the Month for s

Hi
We need a report Plant and Profit center wise Turnover and
gross profit for the Month for selected month and GL's
We are using new GL. but our bi system old version.
SAP_BW -- 7 Patch:SAPKW70015
BI_CONT - 703 Patch:SAPKIBIIP7
Do you have any idea or experiences which data source and data target required to full fill this requirement?
Thanks
Ramana P

Hi
You need to check if you really the report Plant wise and if yes, then check if the Accounting Transactions are maintained at Plant Level in your source system i.e. in R3.
Ideally it should be Business area or Functional Area or Controlling area which are maintained in Accounting Transactions. You will also the relevant details for these Characterisitics + Profit Center in the NEW GL Accounting data sources.
Cheers
Umesh

Tare function DAQ assist and restart function for the vi program

Similar Messages

Maybe you are looking for