Target Disk Mode, dragging files, can't do singular file, batches always -1

This definitely seems silly:
Using: PowerPC G5 and Macbook Core2Duo
I connect the two via firewire, the Macbook in Target Disk Mode. Everything works fine. The Macbook goes into Target Disk Mode flawlessly, and my Macbook's hard drive, Belle, shows up on the PowerPC G5 flawlessly. Which is a dream.
The silly thing I've discovered is that I can't drag a single file (one at a time) from the Macbook to anywhere on the PowerPC hard drive. Instead of a beautiful green gem with a positive symbol on it, I get a white circle with a slash through it.
It doesn't sound silly (though still a problem), but if I drag two or more files, I'll get the green gem with a positive symbol. Silly. But, even sillier, it won't transfer the last file. For example, if I drag IMG 01, IMG 02, IMG 03, IMG 04 all at once, IMG 04 won't transfer, but the other three will.
Maybe this is extremely common and perhaps not even silly but logical, but it's beyond me right now. Any solution?
Macbook core2duo, PowerPC G5   Mac OS X (10.4.9)   firewire, target disk mode

I don't have an explanation or solution to this problem - but I'd use 'personal file sharing' instead of Target Disk mode. It's probably slower, but doesn't require any rebooting.

Similar Messages

  • Target Disk Mode: Searching files in Bootcamp partition

    I'm trying to search my Bootcamp partition via Spotlight or any search method
    1.  After I enter Target Disk Mode,  two "Y" drives show up on my desktop:  Bootcamp and Macintosh HD 320.
    2.  I click on the Bootcamp drive and try to do a search and nothing is displayed.
    3.  To trouble shoot, I click on the drive and enter a file name I can see is in Bootcamp, and still nothing shows up
    4.  I have tried going into spotlight and re-indexing the drive, but the Bootcamp drive is not recognized by spotlight.  Though the Mac 320 drive is.
    I don't care what proces I use to find the file, I just want to find the file.
    My logic board went out on me and I'm trying to access files to transfer onto the new machine.
    Thanks in advance for your help.
    Mac OS 10.7.5

    also, to clarify:  when I click on the partition, I can see the files listed.  I just cannot search.
    thanks again.

  • Can't start MacBook from disk, target disk mode, etc.

    I'm working on a 2007 MacBook (2.16 processor). It crashed this morning and I can't get it to start from a DiskWarrior media, Drive Genius media, OS 10 install disk, external DVD player or in target disk mode.
    I can hear the drive clicking occasionally, so I'm fairly certain it's fried, but why won't the logic board allow an alternate boot? Maybe the crash fried the logic board?
    Thanks.

    It should first ask you to select your language. After you choose your language, click the "Utilities" menu to find Disk Utility.

  • Start in Target disk mode and is dead

    I put my macbook pro in target disk mode for boot another power book from firewire, he asked me for restart, and now dosent start. Is dead. Nothing respond. What to do? HELP

    Strange. It's one of the graphite colored boxes. I bought it as a G4. Maybe they used G3 motherboards for the early G4s. I tried using my iBook in target disk mode and mounting it on the old G4 desktop, then selecting the installation DVD as the startup disk. The machine booted into OS 9, but the iBook's drives mounted. I guess this model has no support for target disk mode and it can't even boot from a target disk.

  • My account, my files, but can't see them in Target Disk mode?

    I have a desktop machine and a laptop (PowerMac G5, Intel MacBook) both running 10.4.11. When the laptop is connected to the desktop in Target Disk mode, I can't see my laptop user account's desktop files, or files in the Document and other folders. I make clone backups of the laptop onto an external drive using SuperDuper, and have this problem in that environment as well. I understand that this is about account permissions etc. but how can I get access to an (admin) account that I myself manage?
    SuperDuper tells me that it is because the short names for the accounts are different. Should I take the drastic step of using the utility ChangeShortName to change one of the names? Or is there a more ordinary fix?
    Thank you--
    Hester

    Thank you Niel, for your suggestion.
    However, it does not seem to do the trick. I did allow "All others" full read/write access to the account's Desktop, Documents, and other folders, but when I restarted the laptop in Target Disk Mode, the red minus signs are still there and I still get the message telling me I do not have sufficient access privileges. I am able to see the files in the account on the laptop that has the same short name as the account I'm using on the desktop, which is why I asked about changing the short name.
    I am the administrator of both computers but have different account names for the primary accounts I use on each. This is a problem to me in Tiger. I used to be able to transfer files easily from the laptop when it was in Target Disk Mode.

  • Can I access files copied to this machine in target disk mode from this machine?

    Can I access files copied to this machine in target disk mode from this machine?

    HI Claire,
    YOu didn't indicate which Mac OS you are using so I'm going to assume 10.4.x.
    Connect the FireWire cable to the target computer after starting it up in FireWire Target Disk Mode.
    *If the cable was already connected, unplugging it from either computer and plugging it back in should allow the target computer's hard disk to appear on the host.*
    Also, make sure you have the most recent Firmware for your iBook... go here:
    http://support.apple.com/kb/HT1471?viewlocale=en_US
    Carolyn

  • Is it possible to store a back up on external HD by transfering files using Target Disk Mode?

    Dear Apple community,
    There's absolutely no way that I'm going to be able to fix my MBP without a clean install. I simply cannot log in and get to my desktop screen after upgrading to Mavericks. So I will have to erase everything and perform a clean install. However, before proceeding with this plan, I'll have to back up my files from my MPB since I cannot use my mac normally, I'll have to back up my files using the Target Disk Mode. I've connected my MPB to another MPB in the past, so I know how the process work. But this time around I won't be able to use another MBP but a MB. I have a few doubts regarding the process especially in what concernd adding an external HD to this equation. So please bear with me and see if you can answer my doubts.
    So this is the equipment I'll be working with: my MPB, my friends MacBook (2008) and my 1TB external hard drive.
    My basic question is: once I connect my MPB in Target Disk Mode to the MB, I'm sure I'd be able to transfer my files to this MB. But let's say that I don't want to leave my files in this MB (after all it's not my computer) and want to send my files straight to an external HD connected to this MB. Is it possible?  If positive, I know that the only FireWire port in the MB is a 400 port. That means my MBP will be connect to the MB using the only FireWire port available in the MB. So I believe that my external HD would have to be connected to the MB with the help of an USB cable. I assume that this will make the transferring process a little slower than if I could count solely on FireWire ports. Slowing the process down is not a problem but could this corrupt any of my files during the transferring process or even damage anything? I assume that would never happen after all it's just digital data, but better safe than sorry, right? What do you think?
    Another thought that occurred to me is: let's say I connect my MBP to the MB using the FireWire 400. I'd still have an FireWire 800 port available on my MBP. If I connect my external HD to my MBP (yeah, the one that will be in Target Disk Mode) using that FW 800 port, would my MBP allow this external HD to mount as if it was just another folder/drive in my computer? If positive, theoretically I'd be able to transfer files from my MBP to my external HD manually (by dragging files from folder to folders), right?
    I really don't want to transfer my files from the MBP to the MB and then from MB to external HD. That would just take time and I really don't know how much available space I'll find on my friend's MB.
    Oh, one last question: when transferring files using Target Disk Mode, do all computers involved in this process gotta have the same OS X version installed or it doesn't matter if e.g one is running Snow Leopard and the other Mavericks?
    Looking forward to hear back from you, experts.

    Grant Bennet-Alder West of Boston, USA 
    A new 1TB External drive (suitable to replace your current Internal drive if you choose to) and enclosure can be had for under US$160
    Ehh, you meant $60 ,  not $160
    CassHeger 
    I do need to buy an external HD to be used solely for that purpose.
    Yes, quality HD are cheap as dirt.
    however a likewise Toshiba Internal HD 1TB is $70   (same as used by Apple)
    http://www.ebay.com/itm/TOSHIBA-MQ01ABD100-1TB-5400-RPM-8MB-Cache-2-5-SATA-3-0Gb   -s-Internal-Notebook-/121107538930?pt=US_Internal_Hard_Disk_Drives&hash=item1c3 2 9263f2
    best options for the price, and high quality HD:
    Quality 1TB drives are $50 per TB on 3.5" or  $65 per TB on 2.5"
    Perfect 1TB for $68
    http://www.amazon.com/Toshiba-Canvio-Portable-Hard-Drive/dp/B005J7YA3W/ref=sr_1_ 1?ie=UTF8&qid=1379452568&sr=8-1&keywords=1tb+toshiba
    Nice 500gig for $50. ultraslim and perfect
    http://www.amazon.com/Toshiba-Canvio-Portable-External-Drive/dp/B009F1CXI2/ref=s r_1_1?s=electronics&ie=UTF8&qid=1377642728&sr=1-1&keywords=toshiba+slim+500gb
    2.5" USB portable High quality BEST FOR THE COST, Toshiba "tiny giant" 2TB drive (have several of them, LOT of storage in a SMALL package)    $117
    http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48 /ref=sr_1_4?s=electronics&ie=UTF8&qid=1379182740&sr=1-4&keywords=2tb+toshiba
    *This one is the BEST portable  external HD available that money can buy:
    HGST Touro Mobile 1TB USB 3.0 External Hard Drive  
    $88
    http://www.amazon.com/HGST-Mobile-Portable-External-0S03559/dp/B009GE6JI8/ref=sr _1_1?ie=UTF8&qid=1383238934&sr=8-1&keywords=HGST+Touro+Mobile+Pro+1TB+USB+3.0+72 00+RPM
    Most storage experts agree on the Hitachi 2.5"

  • Can Target Disk Mode be run from an external hard drive?

    Hi
    My hard drive crashed on me the other day (again) and the apple genius told me all I could do was recover my data and send it in (again)
    QUESTION:
    Can target disk mode could be run using an external hard drive as opposed to another mac? If so, how?
    I think corrupt files on my external hard drive might have crashed my ibook hard drive and I'm wondering if I should really try using the external to save all my info from my ibook. Am I completely clueless about computers or is this actually a possible problem?
    Thanks

    HI Andrea,
    No, you are not completely clueless. If you follow John's sound advice using Target Disk Mode from another Mac, maybe you have a friend or relative who has one. Here's the information on how to use Target Disk Mode that I found in the Apple Help menu:
    Transferring files between two computers using FireWire:
    You can use FireWire to connect your computer to another Mac and have one of the computers appear as an external hard disk on the other computer. This is sometimes called Target Disk Mode.
    To transfer files using FireWire:
    Shut down the first computer and leave the second computer on.
    Connect the two computers using a 6-pin to 6-pin FireWire cable. (If both computers have higher-speed FireWire 800 ports in addition to the standard FireWire 400 ports, you can use a 9-pin to 9-pin cable with the FireWire 800 ports to transfer data at higher speeds.)
    Open System Preferences, click the Startup Disk, and click Target Disk Mode. (Or, start up the first computer while holding down the T key.)
    A disk icon for the first computer appears on the desktop on the second computer. Drag files to and from the disk to transfer them.
    When you finish, eject the first computer's disk by dragging its icon to the Trash. (While you drag, the Trash icon changes to an Eject icon.)
    Push the power button on the first computer to shut it down and disconnect the FireWire cable.
    If the computer to which you connect your computer is running Mac OS 9, it must have FireWire version 2.3.3 or later installed. Use Apple System Profiler (located in /Applications/Utilities) to check the version of FireWire installed. If it has an older version, get an update at the Apple FireWire website at www.apple.com/firewire.
    It's a very simple process but it can only be done between two Macs. You can only "target" another Mac, not an external drive.
    It sounds like your iBook needs service. And if you think that your external drive caused the problem to start with, I wouldn't use it again if you can do the TDM instead to retrieve your important data.
    Also, be careful with total free drive space. Never fall below 15% free space. Open Disk Utility from the Applications/Utilities folder. Then select MacintoshHD in the panel on the left. Then look down towards the bottom of the window on the right. You'll see "Capacity" and "Availablity". It's a good idea to keep track of free space all the time. You need a minimum of 15% just to boot.
    Hope this helps...
    Carolyn

  • Can I Erase/Install In Target Disk Mode?

    I need to reinstall my Mac OS on my 13" MacBook Pro (Early 2011) but I'm having some issues. This began after a restart and I got the grey Apple Hardware Test Screen. The tests ran, and my hardware "appears to be OK". I haven't been able to start successfully in any of the ways that I normally would.
    When I try to start from my hard drive, I get the Apple Logo and a progress bar. The progress bar goes about a third of the way and then my machine turns itself off. Doesn't matter if I hold down the shift key to start in safe mode.
    When I try to start from my Mac OS X Snow Leopard CD I get the Apple Logo screen then a black box stating "You need to restart your computer" etc.
    When I boot the hard drive in Target Disk Mode, I'm told Disk Utilities can't repair my disk, and I'll have to format my Hard Drive. (Hardly a surprise given the above)
    I have the original disks that came with my computer and Mac OS Snow Leopard. I was going to install the OS using the original disks then update to Mac OS Snow Leopard. This leads me to three questions:
    Can I erase/install the OS while in Target Disk Mode by inserting the Mac OS CDs into my desktop then selecting my laptop as the disk to install on.
    Because I can still access all of the contents of my hard drive in Target Disk Mode, should I just drag and drop everything into the external hard drive I just bought or is there some sort of disk image-y something or other I should be creating. If so, how do I create the Disk Image?
    In all likely hood is my internal hard drive just dead?

    Easy solution is this: Computers that can be upgraded to use OS X Internet Recovery. Update your firmware if needed. Then:
    Install OS X Using Internet Recovery
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    To answer the question about Target Disk Mode, the answer is if you can connect two Macs that both have Firewire ports, then you can treat your MBP to TDM so its drive will mount on the other Mac's Desktop. If you can boot the other drive from your Leopard disc, then you can do a clean install of Leopard on your MBP from the other computer.

  • What is the set-up when transfer files through target disk mode

    I'm a bit confused on how to set up the macs to do a file transer in target disk mode.  I am transferring files from an imac to a macbook pro.  I have the cable 6pin to 9pin.  Now what I can't remember (apple.com instructions is what confused me) is on which computer do I hold down the  'T' on start up?  Is it the computer I am transferring the files to? ( in this case the macbook pro).  I use to do this fairly often, but not recently, and I have forgotten.  Any help would be greatly appreciated. 

    Transferring files between two computers using FireWire - Apple

  • Macbook in target disk mode locks up when trying to transfer files to another computer. Suggestions?

    A week ago I installed snow leopard on my girlfriend's macbook without backing anything up. Dumb idea I know. The installation failed multiple times. I ran her computer in target disc mode to try to save what files I could. Now when I try to transfer files it will freeze up at different times. Sometimes I can transfer a huge amount of data like 4GB's and the other times it locks up trying to transfer 4kB's. I'm at my wits end trying to figure this out. I can see the files but can not transfer them.
    Any suggestions or past similar past experiences?

    Hi Anand,
    Have you noticed when you plug the drive in whether its making any sounds? You can put your ear up to the drive on the Macbook. Its located on the right hand front sided of the top case.
    Also, check to see if the target disk mode icon is moving after a few minutes. If the firewire icon has stopped moving it usually indicates that theres something seriously wrong (probably mechanical) with the drive.
    Id definitely give Disk Warrior a try. Especially if you have a situation where you can hear the drive running or spin up but it doesn't make any sound after that. Hope this helps.

  • Using Target disk mode from hard drive which is starting to fail, when I move files, I get a preparing to copy message but nothing happens. Any ideas?

    Hello, i have a MacBook Pro. The hard drive is failing to such an extent that I can't currently use the computer, only things like utility mode etc. I have connected it unto my iMac and using a Firewire in target disk mode, I am attempting to move files across using that mode. The HD of the Macbook Pro appears in the IMac devices menu and I copy and paste the appropriate folders/files but as I do this I get a progress bar which says "preparing to copy" but then nothing appears to happen. Any ideas on what to do? Is there a password or other issue here that I am over-looking. Perhaps the hard drive of my macbook pro is so corrupted that I can't move files over. Any help would be great?

    Try moving smaller groups of files. I' guessing that you don't have a backup huh?

  • Safely copying files from Target Disk Mode to External USB. Advice?

    Just got a new iMac and transferred my system and important files to it from my old iMac. However, a partition on my old iMac has files I want to move to my new iMac so they can be included in Time Machine backups while others I want to move to another external hard drive since I have physical copies of most of those files elsewhere.
    I can connect my old iMac to the new via Target Disk mode and copy the critical files from Mac-to-Mac easily and quickly enough. What I want to know is if I’m safe to copy the other files from the TDM-connected iMac to a USB drive.
    I’ve read that having other devices connected to your Mac while another Mac is connected via TDM can result in corrupted files. Is this true? Is it unsafe to copy files from a TDM Mac to an external USB drive?
    If it is safe, is it best to connect the USB drive to the new Mac or to the old one while it’s in TDM? There’s a lot of data so I’m wondering about transfer times. One method would see files going over Firewire through the new iMac to a USB drive, while the other would go from TDM-connected Mac directly to a USB drive connected to its own USB port. That is:
    TDM iMac > New iMac > USB Drive connected to New iMac
    or
    TDM iMac > USB Drive connected to TDM iMac
    I have limited space on my internal drive and I also don’t want to copy-hop from TDM iMac to New iMac then copy from New iMac to USB drive. I'd like to go directly from old drive to external USB drive if it's safe.
    So I’m looking for advice on the best way to connect devices in order to cut down on copying time and number of copies, and to do it safely without corrupting data. Any advice is appreciated!

    I've used Migration Assistant already to move all of my immediately necessary data and settings over. This other data was on a separate partition and I'm unable to copy all of the data over to my new drive due to lack of space.
    Things are complicated by the fact that I need to change some of my externals over to Time Machine ready backups. Previously I was using 1 TB and a 2 TB drive for TM and another 2 TB drive for general backups/archiving. Now I need to juggle things around so that both 2 TB drives are for TM and the 1 TB is used for archiving.
    An important point I should have mentioned is that I can't use my old iMac normally due to a GPU problem that seizes the system up. This is the reason I can't just copy stuff directly from old iMac to external USBs.
    I'm interested to know if what I described above is safe and if there are any time savings or benefits for copying through my new iMac or connecting the externals directly to the old iMac in TDM.

  • Can't get Target Disk Mode to work with host computer

    Here's the problem. My Powerbook G4 went down a week ago (it's 7 years old) and I suspect the problem is either the hard drive or the portion of the logic board controlling the drive. I also have a Power Mac G4 400 that's running OS 10.4 Tiger. I've been trying to extract some files (that I failed to back up) from the Powerbook via Target Disk Mode using the older Power Mac as the host, however the target disk doesn't show up on the host screen. When I boot up the Powerbook holding the T key, it chimes and the FireWire symbol shows up like it's suppose to, but that's as far as goes. I plan on upgrading to a newer Mac, which would probably work better as a host, but money is a bit tight right now. Any suggestions would be appreciated.

    If the trouble with the Powerbook is either a failed hard drive or a failed hard drive controller, FireWire Target Disk Mode isn't likely to work with any host computer. What you may want to try is installing data recovery software on the desktop G4 and seeing whether it can see the Powerbook's drive (connected in FWTDM) even though it won't mount. Data recovery software is often able to salvage data from drives that won't mount normally; it may be able to do the same thing via FWTDM.
    These three DR utilities are all available in free downloadable demo versions that will show you what the full version would be able to recover before you have to pay for anything:
    Data Rescue
    FileSalvage
    VirtualLab
    Good luck.

  • Can a MacBook Pro with Leopard be Target Disk mode to take my Snow Leopard iMac data?

    I might be going about this wrong, but I wonder if it can be done:  I have an older MacBook Pro that has a clean fresh install of Leopard on it.  I would like to get my current account and data from my iMac (running Snow Leopard) on to the MBP by using Target Disk Mode.  I tried to take saId data off the iMac by target disking it ( FROM iMac TO macbook ) but that gave me a warning about going from a newer operating system down to an older one.  Soooo... can I go in the other direction and target disk the laptop?  Somehow, I don't think that is really the best way to do it.  I do not have the Snow Leopard install disk anymore, so I can't upgrade the laptop.  But is that what I am really going to have to do, to do this right?  Thanks!

    You can't migrate a user account from a later OS to an earlier one.
    You can use TDM to move your data by drag & drop, but you won't be able to retain all preferences.
    Easiest way would be to put the MBP in TDM  and use Disk Utility from the iMac to erase the Macintosh HD on the MBP and then use the Restore function to clone the whole system from the iMac to the MBP.
    But there are caveats - If the OS on the iMac was installed originally from a retail SL disc (white with white cat on it) this should work fine.
    But - if the OS on the iMac is the one it shipped with (installed from a grey disc), it won't have the battery management software required by the MBP.
    In that case your choices are limited to manually moving your data from your home folder to the new account on the MBP, or buy a retail SL disc and upgrade the MBP then use setup assistant to transfer the user and applications.
    As always, I would recommend backing up your data from the iMac to an external drive before starting any of this.

Maybe you are looking for