Target JSP report fails when called with a key defined in cgicmd.dat

Hi,
When I am calling the parameter form report as (on my local pc):
http://rnbhatta-us:8888/reports/pf_sumsptype.jsp?gsi
It works fine. Here 'gsi' is the KEY that has the userid/passwd@connect_string that I have defined in the cmgcgi.dat file on my local pc.
Now the report pf_sumsptype.jsp makes a call in a similar manner to the target report with the same 'gsi' key as in the code :
<form name="form1" method="post" action="/reports/summary_sptype.jsp?gsi">
The call to the target report 'summary_sptype.jsp' fails. It works if I replace 'gsi' in the above line with the userid and connect info.
Is there any other way to hide the database connect info?
Thanks,
Ritendra.

I'm not sure why this should fail, but you could try changing the method above from post to get.
-Manish

Similar Messages

Jsp:include fails when referencing a struts bean:define bean

When I request the jsp listed at the bottom, I get the following error:
          cannot resolve symbol
          symbol : variable pageTemplate
          The jsp works as is in both Tomcat and Resin.
          I know the pageTemplate bean gets defined by struts, because if I remove
          (1), I get the correct output of (2).
          Does WL precompile the pages differently than Tomcat/Resin?
          We know tiles can provide similar functionality, but for various reasons,
          this is the method that seems preferred.
          <%@ page contentType="text/html;charset=UTF-8" language="java" %>
          <%@ page import = "com.stabilia.site.*" %>
          <%@ page errorPage="/error.jsp" %>
          <%@ taglib uri="/WEB-INF/struts-bean.tld" prefix="bean" %>
          <%@ taglib uri="/WEB-INF/struts-html.tld" prefix="html" %>
          <%@ taglib uri="/WEB-INF/struts-logic.tld" prefix="logic" %>
          <%@ taglib uri="/WEB-INF/struts-tiles.tld" prefix="tiles" %>
               <bean:define id="siteConfig" name="siteConfig" scope="session"
                    type="com.stabilia.site.SiteConfiguration"/>
               <bean:define id="pageTemplate" name="siteConfig"
          property="currentPageTemplate"
                    type="com.stabilia.site.PageTemplate" scope="session"/>
               (1)<jsp:include page="<%=pageTemplate.getTemplate()%>" />
               (2)template:<bean:write name="pageTemplate" property="template"/>


I know that in certain versions of WLS the Tag AT_END variables were not getting
          defined properly. Please contact support and ask for a patch referencing this
          with your current version.
          Sam
          Daren Desjardins wrote:
          > To be more specific, I found that I cannot use runtime expressions that
          > involve a bean defined by Struts. If the bean were declared in the
          > following way, it works.
          >
          > <%
          > SiteConfiguration siteconfig = (SiteConfiguration)
          > session.getAttribute(SiteConfiguration.SESSION_KEY);
          > PageTemplate pagetemplate = siteconfig.getCurrentPageTemplate();
          > %>
          > <jsp:include page="<%=pagetemplate.getTemplate()%>" flush="true"/>

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

Is it possible to call diff report queries when called from form

hello all
I want to know if it is possible to call different report queries when called from oracle 9i form .
i tried to use he
SET_REPORT_OBJECT_PROPERTY(REPORT_QUERY = 'q_diff' )
option and actualy called the report name
but it dint seem to work !!!
also is it possible to chng the title of the browser at runtime

Sandeep,
this property is used with passing Record Groups as data parameters from Forms.
Passing the query name indicates that the values contained in the record group substitutes the result of the named query. This may work in client/server Reports, but it definitively doesn't work on teh Web because you can't pass a Record Group as a data parameter in this environment.
Te problem with changing a Reports query is that you must meet the same number of columns and column types as they exist in the Report. I didn't spend much time with XML based runtime customization in Reports. I think that you can change the Reports query through this feature. In Forms you would create the XML file using text_io and the merge it with an existing Reports. I never did this before. So it could be that all I am saying does not work in the end. Before following this idea, you may better ask in teh Reports forum on OTN if it is possible to use the runtime customization feature to modify the Reports query.
Fran

The mic volume is too high when calling with an earphone without mic

There are a common problem on the mic volume when calling with my earphone (TF-10 pro without mic). The mic volume seems like turned to speaker mode, so all the background sound has also captured. Therefore, I would like to clarify that it is a common problem or not.

nobody has the same issue with me？

Crystal Reports 2008 fails when called from e Web Service under 64bit OS

I have discovered that Crystal Reports 2008 doesn't work when called from a Web Service running under 64bit Windows platforms (in my case Windows 2003 Server and Windows XP 64bit); practically no object is instantiated. I've tried several solutions without success.
Before creating a wrapper component to use under COM+, is there anybody who has a better and cheaper solution than creating another component to wrap CR 2008 ?

Hi Sergio,
Before I mark this post as assumed answered I would just like to say and re-iterate that at this time there is no one answer and we fully understand your concerns. As you know in CR 6.0 it came in 16 and 32 bit versions because at the time 32 bit was relatively new but 16 bit was the norm. This is also true for 32 to 64 bit, 32 is the norm and 64 bit is relatively new. We know and are well aware 64 bit is the future and we are working as quickly as we can to move in that direction. Because of the complexity of the Product it's not simply a matter of re-compiling all of our dll's in 64 bit format. The core of our data connectivity with our database drivers which are dependant on third party clients must also need to support 64 bit modes. This as well as Printer drivers also need to be 64 compatable, there are a multitude of dependencies that we rely on that must add 64 bit support. As a programmer you are well aware of the issues around Thunking back and forth between 32 to 64 bits, it can cause delays and potentially loss of data which is a whole other issue. Not to mention also that we would have to ship both versions potentially doubling the size of the distribution packages or doubling the size of the dll's to have the ability to work in both modes. Relatively speaking of course, it would not be double the size but the variables would need to be able to allocate 32 or 64 memory blocks.
The other option is to produce 2 separate versions, this alone is a massive project. Any issue would need to be fixed in separate code streams.
So I'm sure you can see it's not simply a matter of saying yes we support 64 bit. It's a massive project that is going to take time to do and we have to wait for the third party drivers to commit also.
Visual Studio .NET 2005 and 2008 is the only option if you want true 64 bit but you will be limited on what DB's you can support and export formats you can export to. They are the only drivers we did convert to 64 bit.
Thank you for your understanding
Don

Reports fail when run against a different data source

Hello,
We have a VB.NET 2008 WinForms application running on Microsoft .NET 3.5. We are using Crystal Reports 2008 runtime, service pack 3 -- using the CrystalDecisions.Windows.Forms.CrystalReportViewer in the app to view reports. In the GAC on all our client computers, we have versions 12.0.1100.0 and 12.0.2000.0 of CrystalDecisions.CrystalReports.Engine, CrystalDecisions.Shared, and CrystalDecisions.Windows.Forms.
Please refer to another one of our posted forum issues, u201CCritical issue since upgrading from CR9 to CR2008u201D, as these issues seem to be related:
Critical issue since upgrading from CR9 to CR2008
We were concerned with report display slow down, and we seemed to have solved this by using the Oracle Server driver (instead of either Microsoft's or Oracle's OLEDB driver). But now we must find a resolution to another piece of the puzzle, which is: why does a report break if one data source is embedded in the .rpt file is different than the one you are trying to run the report against, in the .NET Viewer?
Problem:
If you have a production database name (e.g. "ProdDB") embedded in your .rpt file that you built your report from and try to run that report against a development database (e.g. "DevDB") (OR VICE VERSA -- it is the switch that is the important concept here), the report fails with a list of messages such as this:
    Failed to retrieve data from the database
    Details: [Database vendor code: 6550 ]
This only seems to happen if the source of the report data (i.e. the underlying query) is an Oracle stored procedure or a Crystal Reports SQL Command -- the reports run fine against all data sources if the source is a table or a view). In trying different things to troubleshoot this, including adding a ReportDocument.VerifyDatabase() call after setting the connection information, the Crystal Reports viewer will spit out other nonsensical errers regarding being unable to find certain fields (e.g. "The field name is not known), or not able to find the table (even though the source data should be coming from an Oracle stored procedure, not a table).
When the reports are run in the Crystal Reports Designer, they run fine no matter what database is being used; but the problem only happens while being run in the .NET viewer. It's almost as if something internally isn't getting fully "set" to the new data source, or something -- we're really grasping at straws here.
For the sake of completeness of information, here is how we're setting the connection information
        '-- Set database connection info for the main report
        For Each oConnectionInfo In oCrystalReport.DataSourceConnections
            oConnectionInfo.SetConnection(gsDBDataSource, "", gsDBUserID, gsDBPassword)
        Next oConnectionInfo
        '-- Set database connection info for each subreport
        For Each oSubreport In oCrystalReport.Subreports
            For Each oConnectionInfo In oSubreport.DataSourceConnections
                oConnectionInfo.SetConnection(gsDBDataSource, "", gsDBUserID, gsDBPassword)
            Next oConnectionInfo
        Next oSubreport
... but in troubleshooting, we've even tried an "overkill" approach and added this code as well:
        '-- Set database connection info for each table in the main report
        For Each oTable In oCrystalReport.Database.Tables
            With oTable.LogOnInfo.ConnectionInfo
                .ServerName = gsDBDataSource
                .UserID = gsDBUserID
                .Password = gsDBPassword
                For Each oPair In .LogonProperties
                    If UCase(CStr(oPair.Name)) = "DATA SOURCE" Then
                        oPair.Value = gsDBDataSource
                        Exit For
                    End If
                Next oPair
            End With
            oTable.ApplyLogOnInfo(oTable.LogOnInfo)
        Next oTable
        '-- Set database connection info for each table in each subreport
        For Each oSubreport In oCrystalReport.Subreports
            For Each oTable In oSubreport.Database.Tables
                With oTable.LogOnInfo.ConnectionInfo
                    .ServerName = gsDBDataSource
                    .UserID = gsDBUserID
                    .Password = gsDBPassword
                    For Each oPair In .LogonProperties
                        If UCase(CStr(oPair.Name)) = "DATA SOURCE" Then
                            oPair.Value = gsDBDataSource
                            Exit For
                        End If
                    Next oPair
                End With
                oTable.ApplyLogOnInfo(oTable.LogOnInfo)
            Next oTable
        Next oSubreport
... alas, it makes no difference. If we run the report against a database that is different than the one specified with "Set Datasource Location" in Crystal, it fails with nonsense errors

Thanks for the reply, Ludek. We have made some breakthroughs, uncovered some Crystal bugs and workarounds, and we're probably 90% there I hope.
For your first point, unfortunately the information on the Oracle 6550 error was generic, and not much help in our case. And for your second point, the errors didn't have anything to do with subreports at that time -- the error would manifest itself even in a simple, one-level report.
However, your third point (pointing us to KB 1553921) helped move us forward quite a bit more. For the benefit of all, here is a link to that KB article:
Link: [KB 1553921|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533353333333933323331%7D.do]
We downloaded the tool referenced there, and pointed it at a couple of our reports. The bottom line is that the code it generated uses a completely new area of the Crystal Reports .NET API which we had not used before -- in the CrystalDecisions.ReportAppServer namespace. Using code based on what that RasConnectionInfo tool generated, we were able gain greater visibility into some of the objects in the API and to uncover what I think qualifies as a genuine bug in Crystal Reports.
The CrystalDecisions.ReportAppServer.DataDefModel.ISCRTable class exposes a property called QualifiedName, something that isn't exposed by the more commonly-used CrystalDecisions.CrystalReports.Engine.Table class. When changing the data source with our old code referenced above (CrystalDecisions.Shared.ConnectionInfo.SetConnection), I saw that Crystal would actually change the Table.QualifiedName from something like "SCHEMAOWNER.PACKAGENAME.PROCNAME" to just "PROCNAME" (essentially stripping off the schema and package name). Bad, Crystal... VERY BAD! IMHO, Crystal potentially deserves to be swatted on the a** with the proverbial rolled-up newspaper.
I believe this explains why we were also able to generate errors indicating that field names or tables were not found -- because Crystal had gone and changed the QualifiedName to remove some key info identifying the database object! So, knowing this and using the code generated by the RasConnectionInfo tool, we were able to work around this bug with code that worked for most of our reports ("most" is the key word here -- more on that in a bit).
So, first of all, I'll post our new code. Here is the main area where we loop through all of the tables in the report and subreports:
'-- Replace each table in the main report with new connection info
For Each oTable In oCrystalReport.ReportClientDocument.DatabaseController.Database.Tables
    oNewTable = oTable.Clone()
    oNewTable.ConnectionInfo = GetNewConnectionInfo(oTable)
    oCrystalReport.ReportClientDocument.DatabaseController.SetTableLocation(oTable, oNewTable)
Next oTable
'-- Replace each table in any subreports with new connection info
For iLoop = 0 To oCrystalReport.Subreports.Count - 1
    sSubreportName = oCrystalReport.Subreports(iLoop).Name
    For Each oTable In oCrystalReport.ReportClientDocument.SubreportController.GetSubreportDatabase(sSubreportName).Tables
        oNewTable = oTable.Clone()
        oNewTable.ConnectionInfo = GetNewConnectionInfo(oTable)
        oCrystalReport.ReportClientDocument.SubreportController.SetTableLocation(sSubreportName, oTable, oNewTable)
    Next oTable
Next iLoop
'-- Call VerifyDatabase() to ensure that the tables update properly
oCrystalReport.VerifyDatabase()
(Thanks to Colin Stynes for his post in the following thread, which describes how to handle the subreports):
Setting subreport connection info at runtime
There seems to be a limitation on the number of characters in a post on this forum (before all formatting gets lost), so please see my next post for the rest....

Load Report failed when opening Report under IIS 5.1

I recently upgraded to Crystal Reports 2008 (12) from Crystal Reports Basic 2008 (10.5). I am using Visual Studio 2008 with the CrystalReportViewer. Now when I run my reports from the website under IIS 5.1 (Windows XP SP3), I get a Load Report Failed. The detailed exception follow:
Error loading report (ConfigureCrystalReports)
CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException (0x800001F5): The Report Application Server failed at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() --- End of inner exception stack trace --- at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) at ncspo.ReportViewer.ConfigureCrystalReports() in D:\Websites\NCSPO\FIS\ReportViewer.aspx.vb:line 43
If I run the report using the ASP.Net Development Server, the reports run fine. It only fails under IIS. From other posts, I understand that i need to grant the Network Service and IIS_WPG group read/write permissions to the windows\temp folder. I have done this for the Network Service, but the IIS_WPG group was not introduced until IIS 6.0. Any ideas on how I can get this working under IIS 5.1?
Here is the code behind page:
Private Sub ConfigureCrystalReports()
            Try
                rpt = New ReportDocument
                Dim strReportFilename As String
                If Len(Request.QueryString("ReportFilename")) > 0 Then
                    strReportFilename = Request.QueryString("ReportFilename")
                Else
                    strReportFilename = System.Configuration.ConfigurationManager.AppSettings("cr404Page")
                End If
                Dim strReportPath As String = System.Configuration.ConfigurationManager.AppSettings("ReportPath")
                Dim strReportFilePath As String = strReportPath & strReportFilename
                Dim strReportFilePath_Full As String = Server.MapPath(strReportFilePath)
                rpt.Load(strReportFilePath_Full)    <--- Exception occurs on this line
            Catch ex As Exception
                lblStatus.Text = "Error loading report (ConfigureCrystalReports)"
                lblStatus.Text &= "<BR>" & ex.ToString()
                ncspo.clsMisc.LogError(ex, Me)
            End Try
        End Sub

Am I correct in reading the following 2 documents that IIS 5.1 is not supported?
If you check this document. It shows IIS6 and 7 no support on 5. See page 6
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f05523e4-35c4-2b10-2c89-9fcf64b0dd22]
This document also on page 5
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50a87366-da1d-2b10-e1b4-a37ab37a2dea]
Thanks.

Report problem when called from menu

Hi
Im calling a report from the menu item. in the items pl/sql i have the following code
DECLARE
Report_Id REPORT_OBJECT;
Report_Job_Id VARCHAR2(20);
Report_Status VARCHAR2(80);
Report_Svr VARCHAR2(20);
BEGIN
Report_Svr := 'testserver';
Report_Id := FIND_REPORT_OBJECT('LOT_AVERAGE_REPORT');
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_FILENAME, 'lot_average_report');
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_DESTYPE, CACHE);
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_SERVER, Report_Svr);
Report_Job_Id := RUN_REPORT_OBJECT(Report_Id);
Report_Status := REPORT_OBJECT_STATUS(Report_Job_Id);
WHILE Report_Status IN ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
Report_Status := REPORT_OBJECT_STATUS(Report_Job_Id);
END LOOP;
IF Report_Status = 'FINISHED' then
WEB.SHOW_DOCUMENT('http://<machine>:<port>/reports/rwservlet/getjobid' || substr(Report_Job_Id, length(Report_Svr) + 2, length(Report_Job_Id)) || '?server=' || Report_Svr);
END IF;
END;
it is working fine till i set the properties of report objects and it is failing when RUN_REPORT_OBJECT(Report_Id); is getting executed.
the error is like frm-10259: invalid null argument to pacaged procedure or function
Kindly helpme to come out of this...
Thanks in advance
Sundar

Sundar,
you just need a report (*.rdf) file that serves as a placeholder for the reports object in the forms module. You can either take one of your reports, one of the sample reports or create a simple dummy report by yourselves.
Create a simple report using reports developer (e.g. "select sysdate as dummy_date from dual" as the report query). Save it as "dummy.rdf" in your reports directory (where your existing reports are stored).
Now open the form that uses your menu. In the Reports node of your forms module, add a report, select "Use existing report file" and browse to the "dummy.rdf" file previously created.
Open the property palette for that report and remove the path information of the "Filename" property, so that it reads "dummy.rdf".
Edit the "Name" property so that it reads "MY_DUMMY_REPORT".
Compile and save the form.
Now use the PL/SQL code mentioned above in your menu and see if it works.
Hope this helps
Gerald Krieger

Reg: WebI Report Failed to Excute with UnKnown Error

Dear Expert ,
I have Implemented , BOE With SAP Integration , Im able to Create the Universe. Using the DataSource , I have Created one WebIntelligence Report , Unfortunatly Im getting the Following Below Mnetioned Error. If I run the Query as Single Object I can See Single Column in the Report. When i go for Multiple Column. Im getting as mentioned Below.
A database error occured. The database error text is: The MDX query SELECT { [Measures].[YCOUNTER] } ON COLUMNS , NON EMPTY CROSSJOIN( [YKTOKS].[LEVEL01].MEMBERS, [YTEXT].[LEVEL01].MEMBERS ) ON ROWS FROM [$YINS_TEST] failed to execute with the error Unknown error. (WIS 10901)
Thanks In Adavance.....

Which version of BOBJ did you install? Which version of SAP BW are you accessing (please state the installed supported packages also).
How many rows do you get when you run the single column report?
Regards,
Stratos

Hide UserID, Password, and Report Path when call Report from Report

Hi,
I have been able to call Report from Report using the hyperlink.
I put these code in my Field on the Report caller.
function F_3FormatTrigger return boolean is
temp varchar2(2000);
begin
temp := 'http://<computer_name>:8889/reports/rwservlet?';
temp := temp || 'server=repsrv' || '&' ||
                     'report=C:\MyReport\rep_detail.jsp' || '&' ||
                     'userid=scott/tiger@orcl' || '&' ||
                     'desformat=htmlcss' || '&' ||
                     'destype=cache' || '&' ||
                     'P_1=' || :ItemID || '&' ||
                     'P_2=' || :ItemName;
SRW.Set_Hyperlink(temp);
return (TRUE);
end;The hyperlink showed, and I can see the rep_detail.jsp showed in the same browser after I clicked the hyperlink.
The problem is, the hyperlink has to include the reports path and also userid and password.
If I did not put the userid and password, it will showed in another browse that
"The report has uncompiled PL/SQL"
How can I hide those userid, password, and the reports path?
BTW, Is there anyway to show the report callee in different page (precisely, open another IE) from the report caller?
Any help would be grateful.
Many thanks,
Buntoro

Hi,
Thanks for the answers.
Yet, I am still doubt about using cgicmd.dat.
I have looked around in this forum saying that it is not secure to use cgicmd.dat. Because all report request does not use authentication (the client can directly open report without login).
In Form, I can use the On-Logon to do the Oracle Form login (to do logon to the database), and then I use my own custom user login to restrict the menu for each user.
I do this since I want to restrict the user,
i.e user A can only view the sales form as well as sales report,
user B can only view the purchasing form as well as purchasing report.
Well, I am not so fond about the SSO itself.
It comes to my mind, since I don't have to re-login (to the database) each time I call another form (login database is only once at the first Form, On-Logon). It also goes to when calling the report caller.
What is RAD?
How can we use it?
Is OID = Oracle Internet Directory?
If true, maybe, I won't use it since I don't understand about it also.
Why we don't have to specify the userid and password when Form calls Report1 (using Run_Report_Object and Web.Show_Document())?
But we have to specify the userid and password when Report1 calls Report2.
Any help is appreciated.
Many thanks,
Buntoro

Stored procedure fails when called through jdbc

Stored procedure returns incorrect results
Hi!
I am really puzzled about this and would really appreciate some help.
We are migrating an servlet/jsp-application from websphere application server 3.5.3 to
Oracle Application Server 10g. The backend is an Oracle 9i database server. Most of the application
is build upon stored procedures in oracle. So the migration part is to make the servlets and JSPs
to work in their new environment, creating deployment descriptors and so on.
We are using JDeveloper 9.0.5.2 for development on Windows XP OS
Java version is 1.4.2_03-b02 (ojvm)
and also have an Oracle Application Server Enterprise Edition 9.0.4.0.0
running on a W2K SP6. Java version is 1.4.2_03-b02, for development and testing.
When running standalone (that comes width JDeveloper) OC4J the Java version is 1.4.2-b28 (client VM)
The problem:
When calling a stored procedure that calls another user defined procedure the returned result is wrong.
The example snippet I've enclosed only success on my standalone OC4J.
When I run the Java-app in JDeveloper using embedded OC4J it behaves incorrectly.
When I run the Java-app deployed at the standalone OC4J that comes with JDeveloper it runs just fine.
When I deploy the Java-app at the Oracle Application Server it behaves bad again.
It looks like the procedure called by the procedure cannot execute correctly or that it got null value as in-parameter.
What puzzles me is that this procedure did work correctly on websphere (JVM 1.2.2 and Oracle jdbc-drivers classes12.jar)
and it does executes just fine on the standalone OC4J.
I have tried different classes12.jar, ojdbc14.jar, different datasources (com.evermind.sql.DriverManagerDataSource,
oracle.jdbc.pool.OracleConnectionCacheImpl) width no succes.
/Mats Nord
The code follows....
- The java code
CallableStatement cs =
     con.prepareCall("{ call oden.sp_tidGetProjForMember( ?, ?, ?, ?, ? ) }");
cs.registerOutParameter(1, OracleTypes.CURSOR);
cs.setLong(2, employeeNo);
cs.setLong(3, projId);
cs.setLong(4, actId);
cs.setLong(5, period);
cs.execute();
ResultSet rs = (ResultSet) cs.getObject(1);
while (rs.next()) {
     MyItem aItem =
          new MyItem(
               Long.toString(employeeNo),
               rs.getString(1),
               rs.getString(2),
               rs.getString(3),
               rs.getString(4),
               rs.getString(5),
               rs.getString(6),
               rs.getString(7),
               rs.getString(8),     // (Actually a number). This row returns "0" but it shuold return a value greater than "0"
               rs.getString(9));
          items.addElement(aItem);
- The stored procedure:
PROCEDURE sp_tidGetProjForMember (
rs_Proj IN OUT report_types.weakCur -- recordset
,p_pnr IN V_ADMANV.anv_PNR%TYPE -- pnr projektmedlem, NUMBER(12)
,p_projid IN PROJ.PROJ_ID%TYPE -- projekt-id, NUMBER(5), kan vara tomt
,p_aktid IN AKT.AKT_ID%TYPE -- aktivitets-id, NUMBER(5), kan vara tomt
,p_yyyymm IN NUMBER) -- period NUMBER(6), YYYYMM, kan vara tomt
<< Removed som lenghtly code from the post >>
OPEN rs_Proj FOR
SELECT
DECODE(TIDPROJ.prj_status, v_skickad_id, 0, -- godkÃ¤nd
     v_godknd_id, 0, -- godkÃ¤nd
     NULL, 1, -- under bearbetning
                    v_ejgodk_id, 2, -- ej godkÃ¤nd
                    v_undknd_id, 2 -- ej godkÃ¤nd
          ) AS STATUS -- skickad 0: godkÃ¤nd, 1: under bearbetning, 2: underkÃ¤nd
     ,TIDPROJ.prj_projid
     ,PROJ.proj_namn
     ,V_ADMANV.anv_namn AS PLEDNAMN
     ,V_ADMANV.anv_PNR AS PLEDPNR
     ,TIDPROJ.prj_aktid
     ,AKT.AKT_NAMN AS AKTNAMN
,NVL(SUM(NVL(UTILITY.sp_ds2Decnum(TIDPROJ.prj_tid), 0)), 0) -- when calling the fuction UTILTY.sp_ds2Decnum
     ,NVL(TIDPROJKOMMENT.tpk_kommentar, ' ')
FROM TIDPROJ
<< Removed som lenghtly code from this post >>
v_utdata := 'Recordset';
Utility.sp_putLogg (v_spname, 0, v_indata, v_utdata, SQLCODE, SQLERRM); -- commits
EXCEPTION
     WHEN OTHERS THEN
v_utdata := 'FEL';
Utility.sp_putLogg (v_spname, 0, v_indata, v_utdata, SQLCODE, SQLERRM); -- rollbacks
END sp_tidGetProjForMember;

Hi Kevin,
Just an addition. To create SSIS package programmatically, please refer to the document:
http://msdn.microsoft.com/en-us/library/ms345167.aspx
To implement dynamic column mapping through SSIS Script Component, please refer to:
http://wikiprogrammer.wordpress.com/2011/04/08/dynamic-column-mapping-in-ssis-part-1/
http://blog.quasarinc.com/ssis/best-solution-to-load-dynamically-change-csv-file-in-ssis-etl-package/
Regards,
Mike Yin
TechNet Community Support

Load Report fail when use impersonate="true" in dotnet config

We have VS2005 and use Crystal 11.5. Our crystal report runs fine. When we set <identity impersonate="true" userName=".\user id" password="user password" />
in our Web.Config file, the report show error "Load report fail".
Could someone tells me why?
Thanks
Tony

Hi Tony,
Please check you are using impersonation in same way
following line below under the <system.web > tag , as illustrated below
<system.web>
<identity impersonate="true"/>
<authtorization>
<allow users="?"/><authtorization/>
This may be permission issue. Domain users need access to "C\Windows\Temp directory" and to the report directory try with giving permission .
Hope this helps!!
Regards,
Shweta

Registry's EnumKey Lookup Failing When Called By MSBuild?

A MS-DOS script executes the VBScript below and it works fine. However, when using a MS Build master deployment file which calls the aforementioned MS-DOS script, the 2nd location lookup ("SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Products\")
fails with a result code of 2. I have spent countless hours trying to figure out why the difference. Any ideas?
Const HKLM = &H80000002 'HKEY_LOCAL_MACHINE
Set oRegistry = GetObject("winmgmts:{impersonationLevel=impersonate}!\\" & node & "/root/default:StdRegProv")
REM 1st location: "SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\"
sBaseKey = "SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\"
iRC = oRegistry.EnumKey(HKLM, sBaseKey, arSubKeys)
If iRC <> 0 THEN
WScript.Echo "Registry lookup failed for " & sBaseKey
ELSE
For Each sKey In arSubKeys
iRC = oRegistry.GetStringValue(HKLM, sBaseKey & sKey, "DisplayName", sValue)
If sValue = Wscript.Arguments.Item(1) Then
oRegistry.GetStringValue HKLM, sBaseKey & sKey, "UninstallString", sValue
InstalledApplications = Replace(sValue, "/I{", "/X{")
IF LEN(InstalledApplications) > 0 THEN
InstalledApplications = InstalledApplications & " /qn /l*vx """ & sFile & ".Log""" & Chr(13) & Chr(10)
END IF
END IF
NEXT
END IF
REM 2nd location: "SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Products\<GUID>\InstallProperties"
arProducts = NULL
sBaseKey = "SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Products\"
iRC = oRegistry.EnumKey(HKLM, sBaseKey, arProducts)
If iRC <> 0 THEN
WScript.Echo "Registry lookup failed for " & sBaseKey
ELSE
For Each guid In arProducts
sInnerKey = sBaseKey & guid & "\InstallProperties\"
iRC = oRegistry.GetStringValue(HKLM, sInnerKey, "DisplayName", sValue)
If sValue = Wscript.Arguments.Item(1) Then
oRegistry.GetStringValue HKLM, sInnerKey, "UninstallString", sValue
InstalledApplications = Replace(sValue, "/I{", "/X{")
IF LEN(InstalledApplications) > 0 THEN
InstalledApplications = InstalledApplications & " /qn /l*vx """ & sFile & ".Log""" & Chr(13) & Chr(10)
END IF
END IF
NEXT
InstalledApplications = InstalledApplications & "GOTO:EOF"
END IF
Shawn ([email protected])

Or try sysnative:
https://msdn.microsoft.com/en-us/library/windows/desktop/aa384187%28v=vs.85%29.aspx
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing)
But that is not a portable solution. it does not apply to 32 bit platforms and will only work from a 64 bit session when calling intp a 32 bit session.
If we are in a 32 bit session running VBScript then we cannot see the 64 bit registry without the help of WMI. The correct solution is to build in the correct environment. If you want to run in both environments then you will need to test the
32 bit version on a 32 bit system assuming the applications being enumerated use the same keys on both architectures.
¯\_(ツ)_/¯
This is correct. I totally forgot there are 32 bit and 64 bit versions of MSBuild. I made no changes except to execute the main deployment script with the 64 bit version of MS Build. Thank you for all of your help.
-Shawn
Shawn ([email protected])

Crystal report hangs when calling oracle package

hi i have a oracle package that calls a proceadure, if i test this package in PLSQL developer it compiles and i get sensible results
this package has been designed using a ref type cursor to be called from crystal reports. it primary objective when the report is run, is to use File util to output data to an xml file.
when i run this from crystal reports it locks crystal reports up, and dosent output a file.
any ideas why crystal is hanging?
crystal DB call
{CALL Enhanced_Pharos_Report.run_report
(NVL({?a_channel_id},0),{?b_on_date})}
package
create or replace package UKTV_PHAROS_EXPORT_RPT
-- Author : WARDLJ01
-- Created : 03/04/2006 12:25:03
-- Purpose : export xml for pharos voiceovers
-- Public type declarations
AS
TYPE result_set_type IS REF CURSOR;
PROCEDURE run_report
(main_cursor IN OUT result_set_type,
V_CHANNEL_ID NUMBER,
V_ONDATE DATE);
end ;--UKTV_PHAROS_EXPORT_RPT;
package body
create or replace package body UKTV_PHAROS_EXPORT_RPT AS
PROCEDURE run_report
(main_cursor IN OUT result_set_type,
V_CHANNEL_ID NUMBER,
V_ONDATE DATE)
is
BEGIN
OPEN main_cursor FOR
-- Passess the parameters back to the cursor - which passes them back to the Crystal Report output
SELECT V_CHANNEL_ID, V_ONDATE from DUAL;
-- This is a procedure that calls FILE_UTL to export the data.
UKTV_PHAROS_Export(V_CHANNEL_ID, V_ONDATE);
END;
end;
Proceadure
create or replace procedure uktv_own.UKTV_Pharos_Export(V_CHANNEL_ID number, V_ONDATE date) is
l_output utl_file.file_type;
p_filename varchar2(30);
V_DETAIL_id varchar2(100);
V_MEDIA_ID varchar2(150);
V_REQUIRED varchar2(50);
V_SCRIPT varchar2(4000);
V_DEL_DATE varchar2(100);
V_FULLMEDIA_ID varchar2(500);
V_START_TIME varchar2(100);
V_DURATION varchar2(100);
V_DATE varchar2(100);
V_CHANNEL varchar2(40);
V_LOGO_NAME varchar2(250);
Cursor VO_CURSOR
IS
select event_voiceover.detail_id, vo_media_id, vo_required, vo_script, vo_del_date, full_media_id,
event.start_time, event.duration, event.on_date, event.channel_id, logo.logo_name
from event_voiceover,
onair.event, onair.event_technical_data,
onair.logo
where event_voiceover.detail_id = event.detail_id
and event_technical_data.event_technical_data_id = event.event_technical_data_id
and event_technical_data.content_id = logo.logo_id and
event.channel_id = V_CHANNEL_ID and
vo_required = 500004580 and
event.on_date = V_ONDATE;
begin
p_filename :='voice_overs.xml';
l_output := utl_file.fopen ('PHAROS_DIR', p_filename, 'w' );
OPEN VO_CURSOR;
utl_file.put ( l_output,'<Voice_Overs>');
Loop
FETCH VO_CURSOR INTO V_DETAIL_id, V_MEDIA_ID, V_REQUIRED,V_SCRIPT, V_DEL_DATE, V_FULLMEDIA_ID, V_START_TIME, V_DURATION, V_DATE, V_CHANNEL, V_LOGO_NAME;
EXIT WHEN VO_CURSOR%NOTFOUND
OR VO_CURSOR%ROWCOUNT = 10000;
utl_file.put( l_output, '<DETAIL_ID>');
utl_file.put( l_output, V_DETAIL_ID);
utl_file.put( l_output, '</DETAIL_ID>');
utl_file.put( l_output, '<MEDIA_ID>');
utl_file.put( l_output, V_MEDIA_ID);
utl_file.put( l_output, '</MEDIA_ID>');
utl_file.put( l_output, '<REQUIRED>');
utl_file.put( l_output, V_REQUIRED);
utl_file.put( l_output, '</REQUIRED>');
utl_file.put( l_output, '<SCRIPT>');
utl_file.put( l_output, V_SCRIPT);
utl_file.put( l_output, '</SCRIPT>');
utl_file.put( l_output, '<DEL_DATE>');
utl_file.put( l_output, V_DEL_DATE);
utl_file.put( l_output, '</DEL_DATE>');
utl_file.put( l_output, '<FULLMEDIA_ID>');
utl_file.put( l_output, V_FULLMEDIA_ID);
utl_file.put( l_output, '</FULLMEDIA_ID>');
utl_file.put( l_output, '<START_TIME>');
utl_file.put( l_output, V_START_TIME);
utl_file.put( l_output, '</START_TIME>');
utl_file.put( l_output, '<DURATION>');
utl_file.put( l_output, V_DURATION);
utl_file.put( l_output, '</DURATION>');
utl_file.put( l_output, '<ONDATE>');
utl_file.put( l_output, V_DATE);
utl_file.put( l_output, '</ONDATE>');
utl_file.put( l_output, '<CHANNEL_ID>');
utl_file.put( l_output, V_CHANNEL);
utl_file.put( l_output, '</CHANNEL_ID>');
utl_file.put( l_output, '<LOGO_NAME>');
utl_file.put( l_output, V_LOGO_NAME);
utl_file.put( l_output, '</LOGO_NAME>');
utl_file.new_line ( l_output);
end loop;
utl_file.put ( l_output,'</Voice_Overs>');
utl_file.fclose(l_output);
end UKTV_Pharos_Export;

Hi yes the package uses fileutil to output a file,
the report user has permission over the file util output directory.
I have previously used this method to generate rpt, and other output files in parelell.
thanks
james

Target JSP report fails when called with a key defined in cgicmd.dat

Similar Messages

Maybe you are looking for