Target parameter is not being used

Hello,
while activating the transformation, i get an error saying" Target parameter 0058 is not being used". I have checked all the rules, infoObjects etc. but still im not able to activate the transformation at all.
Eventhough the source field-target field mapping is correct, the system is throwing such errors. What could be the possible cause of it. Any idea?
Regards Sucheta

Hello Sarvanan,
What do you mean by "the respective field not having the Unit/Curr Objects"..?..some of them are of the type "number" whereas others are CHARS.
Everytime when i add some field i cannot re-create the whole transformation. There has to be some inconsistency as my mapping of source-target field is correct. I have also raised this to OSS but as usual they are taking thier own sweet time to reply.
Surprisingly the transformation got activated yesterday and the dataload too was successful. Today again the same ols problem of "parameter is not being used"..!!
still could you pls throw some light on Unit/Currency objects that u mentioned..??
Thanks in adv.
Sucheta

Similar Messages

Rule 5 :target InfoObject Name Source parameter 007 not being used

Hi Gurus,
I am trying to load data Into BI using flat file .During creating transformations for infocubes am getting this error.Rule 5 :target < InfoObject Name > Source parameter 007 not being used .
Thanks

Thanks Beekay iyour suggestion helped me .
My problem is solved ,in rule details i removed those fields and again insert those fileds .
Thanks

Error during transformation : Source parameter is not being used

Hi,
I am trying to map two fields from datasource into one field in DSO i.e
Assigned Plant and storage location to Plant_storage infoObject.
but I am unable as I am getting the error below.
Rule (target: ZOBJ): Source parameter 0140 is not being used
Message no. RSTRAN502
Procedure for System Administration
Internal rule ID 68
I have checked online and seen related SAP notes but they are meant for BW 7.0. My system is BW 7.3
how can I resolve this issue.
thanks
Bhat

Hi Bhat,
When you are using two source fields are you doing the result calculation through routine or formula?
Just check if you are using any of these thing then both the source fields are getting used in the routine code.
Regards,
Durgesh.

BizTalk Server 2013 R2 EDI EDIFACT custom Target Namespace is not being used

I have a client that has a partner that doesn't use the "out of the box" BizTalk EDIFACT 97A DELFOR schema. I'm using BizTalk Server 2013 R2. I need to use a custom target namespace. I have created a custom schema for EFACT_D97A_DELFOR with
a different namespace http://schemas.microsoft.com/BizTalk/EDI/EDIFACT/2006_<partnername>.
In the Parties agreement/Transaction Set Settings/Local Host Settings, I have the following in a separate row under the "Default", UNH2.1=DELFOR, UNH2.2=D, UNH2.3=97A and TargetNamespace=http://schemas.microsoft.com/BizTalk/EDI/EDIFACT/2006_<partnername>
It wants to use the out of the box schema from the error below but I need it to use the custom schema. If I change the input file with a UH2.5 value along with changing the root node to match it EFACT_D97A_DELFOR_<UNH2.5), it works but the partner
will not be sending this, so it's not an option.
Error details: An output message of the component "Unknown " in receive pipeline "Microsoft.BizTalk.Edi.DefaultPipelines.EdiReceive, Microsoft.BizTalk.Edi.EdiPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
is suspended due to the following error:
Error encountered during parsing. The Edifact transaction set with id '' contained in interchange (without group) with id '000010080', with sender id '<senderid>', receiver id '<receiverid>' is being suspended with following
errors:
Error: 1 (Miscellaneous error)
70: Finding the document specification by message type "http://schemas.microsoft.com/BizTalk/EDI/EDIFACT/2006#EFACT_D97A_DELFOR" failed. Verify the schema deployed properly.
Error: 2 (Miscellaneous error)
71: Transaction Set or Group Control Number Mismatch
Error: 3 (Miscellaneous error)
29: Invalid count specified at interchange, group or message level
Any thoughts for this issue?
Thanks,
Sean

All,
Because the trading partner is not sending the UNH2.5, UNG2.1 and UNG2.2 values in the incoming message, the EDIFACT custom targetnamespace schema will not be used. I created a decode custom pipeline component where I inject the UNH2.5 element,changed
the rootnode to the trading partner specific schema to EFACT_D97A_DELFOR_XYZ (where "XYZ" is the value in the UNH2.5) and in the Party agreement->TransactionSetSettings->LocalHostSettings default row specifying the UNH2.1, UNH2.2
and UNH2.5, it will then use the custom schema(http://schemas.microsoft.com/BizTalk/EDI/EDIFACT/2006#EFACT_D97A_DELFOR_XYZ. I could've injected the UNG segment
and used a custom target namespace and not changed the rootnode of the custom schema but didn't want to add all that extra segment information.
The example below assumes that the UNH segment only has values "up to" UNH2.4 only and appends the UNH2.5. Uses the UNA segement to dynamically set the componentDataElementSeparator.
//UNA segment e.g. UNA:+.? '
//this example above has ' as the segmentTerminator, : as the componentDataElementSeparator, + as the dataElementSeparator
string unaSegment = messageBody.Substring(0, messageBody.ToUpper().IndexOf("UNA") + 9);
string componentDataElementSeparator = unaSegment.Substring(3, 1);
string dataElementSeparator = unaSegment.Substring(4, 1);
string segmentTerminator = unaSegment.Substring(8, 1);
string UNH_Segment = messageBody.Substring(messageBody.ToUpper().IndexOf("UNH"));
UNH_Segment = UNH_Segment.Substring(0, UNH_Segment.IndexOf(segmentTerminator));
//inject UNH2_5 in the existing UNH_Segment
messageBody = messageBody.Replace(UNH_Segment,
UNH_Segment + componentDataElementSeparator + UNH2_5);
Thanks All for all your help!!
Sean Boman

HBOgo "StageVideo is not being used"

I just updated flash today, November 25 2013, which gives me version 11,9,900,152. The problem I'm having seems specific to the HBOgo.com site.
The problem occurs in all three browsers that I've tried, Firefox (my preferred browser), Chrome, and IE 9. Also, I've tried the various suggested troubleshooting suggested on the Adobe site as far as enabling Flash addon in IE after disabling (unchecking) the choice for ActiveX filtering. I've tried uninstalling/reinstalling all 3 browsers, reinstalling flash, resetting all video card settings to default, going through the Device Manager and uninstalling the device entirely, making sure it has no errors or conflicts anywhere and the same thing for the network devices, they all indicate that they are working properly.
My device is an HP Pavilion dv7 Notebook PC running Vista Home Premium Service Pack 2. It has 4 GB of memory and the video card is an NVIDIA GeForce 9600M GT. The drivers are all up to date and so is every application and its associated add-ons that I will mention. Also, it shipped with a Blu-Ray player which I've used to display Blu-Ray content on an external monitor with no issue. (If it can do that, then shouldn't it just be some software issue preventing it from playing back a video stream of inferior quality from hbogo?)
Regarding Flash Player, I've watched videos on YouTube and Hulu (and countless other sites which stream Flash Video) at resolutions of 720 and 1080 which played at framerates between 25 and 30 fps and which also did not use hardware acceleration but nevertheless maintained CPU usage of less than 70%. So, the computer can certainly do it even without the help of the GPU, and it can do it from other sites that use flash, but not from HBOgo. That's a second problem, even when flash video plays well, it's still not using hardware acceleration, but first I want to know why HBOgo's flash player is so much worse than everyone else's player.
Here is the specific issue: I navigate to HBOgo.com, pick any video to play and begin playback. Playback usually begins at a relatively low resolution (I'd guess 480 or so based on its obvious pixelation), and then steps up the resolution gradually. Usually after a minute or so, it will have reached its best resolution and that's when it starts dropping frames like crazy and pinning the CPU at 100%. The video looks terribly choppy and the audio skips the more choppy the video is. When I click pause or hit the spacebar for a pause, it will take two or three seconds as it spits out the last few video frames before finally showing the paused icon on the last frame. Those two seconds seem to corrolate with CPU processing since there is no noticable delay when pausing video anywhere else under any other conditions. Of course, CPU useage will drop back to 5 or 10 while the video is paused.
Right-clicking the screen lets me choose "Show Video Debug" which in turn tells me:
     StageVideo enabled in OSMF: Yes
     StageVideo is supported.
     StageVideo is not being used, regular video 'probably' is.
This is where I got the information about dropped frames. If it matters, when paused, the buffer will fill to about 400 Mb plus or minus about 10 percent of that, perhaps. Also, during playback, the buffer maintains approximately the same amount, indicating that my ISP has no problem sending that much data to my device. The buffer seems fill to a lenght of time, about 60 seconds; so, as the video resolution goes down, the total buffer drops accordingly... sometimes it is at 200 Mb for 60 seconds with lower resolution, etc...
Speaking of my ISP, I have Verizon FiOS (I don't know why it would matter, but I'm in King of Prussia, which is near Philadelphia, PA). I just tested my bandwidth and it tells me that my IP is 71.175.97.244 and my download rate is 57.98 Mbps from some server in Matawan, NJ. I don't think networking issues factor into this at all. I say that because, digging into the developer tools (all 3 browsers show the same network activity: Firefox, Chrome, and IE) and clicking on the "Network" column, it consistently shows low latency for all the stream components. For example:
     path: http://hds.pro12.lv3.hbogo.com/videos/PRO12/e2/hbo/feature/728425/hbo_821867_PRO12_f4m/hbo _821867_PRO12_8-Seg1-Frag858
     method: get
     type: video/f4f
Timing Tab show:
     Sending: 0     Waiting: 89mg     Recieving: 159ms
This seems to indicate that I'm getting the data sent to me without any problem, so forget about network issues, right?
Also, regarding information available in Developer Tools, I can see that the flash video object has the paramater "wmode" set to "transparent". I already wasted time messing with this before I realized that the paramater is irrelavent while in fullscreen mode -- besides the fact that even when it is changed to direct or gpu when not in full screen, it does nothing to help matters. I think this was covered in one of the last discussions talking about lack of hardware acceleration on HBOgo -- the same discussion that ended with a few people saying that they were going to "throw in to towel".
What am I missing here? Why is StageVideo supported but not used? Why do other players which use flash play videos with better quality despite still not using hardware acceleration?
Windows Vista = updated
NVIDIA Video Drivers = updated
Flash Player = updated
Flash Addons (pepper flash, etc...) = updated
Firefox, Chrome, IE = all updated
There's got to be something I can do. What is it?

Hello Sarvanan,
What do you mean by "the respective field not having the Unit/Curr Objects"..?..some of them are of the type "number" whereas others are CHARS.
Everytime when i add some field i cannot re-create the whole transformation. There has to be some inconsistency as my mapping of source-target field is correct. I have also raised this to OSS but as usual they are taking thier own sweet time to reply.
Surprisingly the transformation got activated yesterday and the dataload too was successful. Today again the same ols problem of "parameter is not being used"..!!
still could you pls throw some light on Unit/Currency objects that u mentioned..??
Thanks in adv.
Sucheta

UPD processer is not being used

Hi Friends,
We have 2 application servers and one central instance.Each of these servers are having 1 UPD processor and 1 UPD2 processor.
When the system is heavily loaded, i could see a lot of (more than 200) upadates are queued up in SM13 transaction.And when I check the SM66 transaction I could see only 2 UPD processors are being used which are from Application 2 and Central Instance and no UPD processor is being used from Application 1.
What could be the reason? also, our updates are taking a lot of time get completed.
In SM14 transaction all these UPDs are active.
Please help.
Thanks,
Shanahas

Hello Sarvanan,
What do you mean by "the respective field not having the Unit/Curr Objects"..?..some of them are of the type "number" whereas others are CHARS.
Everytime when i add some field i cannot re-create the whole transformation. There has to be some inconsistency as my mapping of source-target field is correct. I have also raised this to OSS but as usual they are taking thier own sweet time to reply.
Surprisingly the transformation got activated yesterday and the dataload too was successful. Today again the same ols problem of "parameter is not being used"..!!
still could you pls throw some light on Unit/Currency objects that u mentioned..??
Thanks in adv.
Sucheta

Rule 5 (target: 0FISCPER): Source parameter 0004 is not being used

When I map both Fiscal year & Posting period to Fiscal period,
Transformation promts error " Rule 5 (target: 0FISCPER): Source parameter 0004 is not being used"
Why is that so?
Rule Details for Fiscal Period show
Conversion Exit : PER 17 & Perform is flagged ...what is it implying?

ECC Field is PERIO for posting period.
GHAGR for fiscal year.
Automatic time conversion is not possible for source field GJAHR
Message no. RSTRAN070
Diagnosis
Cannot establish automatic time conversion to 0FISCPER for source field GJAHR. The source is a DataSource and consists of fields, not InfoObjects. Time conversion can only be performed automatically for InfoObjects.
System Response
Time update is set to direct update of target field.
Procedure
If you require time conversion, you can assign an InfoObject to the field. You do this in the rule details.
Alternatively, you can define your own time conversion using a formula or a routine.
Can Fiscal Period can be populated when just mapped to Posting peroid..???
Message was edited by:
Jr Roberto

Parameter value from app is not being used

Hi,
I have .NET application which renders the report from BOE using infoObject model. This report has parameter and the paramter info is passed from the application using following code.
CrystalReportViewer1.EnterpriseLogon = enterpriseSession;
CrystalReportViewer1.ReportSource = (Report)infoObject;
CrystalReportViewer1.ParameterFieldInfo = parameterFields;
But when I try to run this form...though the parameterfields have the detail of the paramter still Promt screen is scheduled by BOE to provide input for the parameter...
Can someone help me on this why the parameter value I am sending is not being used.
Thanks
Kajal

It might have something to do with how you are creating your parameter field collection that you are passing to the viewer. Please refer to the ViewReportParameter sample in the following collection available [here|https://boc.sdn.sap.com/node/5794]

Index not being used in access path

Hi,
I have been trying to rewrite a query which currently is taking almost 1min and 25 secs to execute. The database version is 11.1.0.7.
The query is -
SELECT COUNT(1)
FROM TAB1 p
WHERE p.ACODE = 24377
AND NOT EXISTS (SELECT 1 FROM TAB2 ph where ph.PKey = p.AKey )
AND NOT EXISTS (SELECT 1 FROM TAB3 phs where phs.PKey = p.AKey )
AND p.rflag = 'Y';
The table originally didn't have an index on p.ACODE. So, I created this index and set it to visible and set the optimizer_use_invisible_indexes parameter also to TRUE. I set the monitoring on this index too. Even though I have created the index on the ACODE column, the access path doesn't use it. Can someone please tell me why this is not being used.
Below is the explain plan for the sql stmt and the usage of the index -
I have changed the actual table and column names -
SQL> SELECT COUNT(1)
2 FROM TAB1 p
3 WHERE p.ACODE = 24377
4 AND NOT EXISTS (SELECT 1 FROM TAB2 ph where ph.PKey = p.AKey )
5 AND NOT EXISTS (SELECT 1 FROM TAB3 phs where phs.PKey = p.AKey )
6 AND p.rflag = 'Y';
COUNT(1)
1
SQL> explain plan for
2 SELECT COUNT(1)
3 FROM TAB1 p
4 WHERE p.ACODE = 24377
5 AND NOT EXISTS (SELECT 1 FROM TAB2 ph where ph.PKey = p.AKey )
6 AND NOT EXISTS (SELECT 1 FROM TAB3 phs where phs.PKey = p.AKey )
7 AND p.rflag = 'Y';
Explained.
Elapsed: 00:00:00.02
SQL> @$ORACLE_HOME/rdbms/admin/utlxpls.sql
PLAN_TABLE_OUTPUT
Plan hash value: 3942424611
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 87 | 214K (2)| 00:42:57 |
| 1 | SORT AGGREGATE | | 1 | 87 | | |
|* 2 | HASH JOIN ANTI | | 1 | 87 | 214K (2)| 00:42:57 |
|* 3 | HASH JOIN ANTI | | 1 | 60 | 209K (2)| 00:41:56 |
|* 4 | TABLE ACCESS FULL | TAB1 | 1 | 32 | 209K (2)| 00:41:55 |
| 5 | INDEX FAST FULL SCAN| PK_TAB3 | 29918 | 818K| 53 (0)| 00:00:01 |
| 6 | INDEX FAST FULL SCAN | PK_TAB2 | 3199K| 82M| 5059 (1)| 00:01:01 |
Predicate Information (identified by operation id):
2 - access("PH"."PKey"="P"."AKey")
3 - access("PHS"."PKey"="P"."AKey")
4 - filter(TO_NUMBER("P"."ACODE")=24377 AND "P"."rflag"='Y')
20 rows selected.
Elapsed: 00:00:00.03
SQL> select index_name,VISIBILITY from user_indexes where index_name='IDX_TAB1_ACODE';
INDEX_NAME VISIBILIT
IDX_TAB1_ACODE VISIBLE
Elapsed: 00:00:00.01
SQL> show parameter visible
NAME TYPE VALUE
optimizer_use_invisible_indexes boolean TRUE
SQL>
SQL> SELECT v.index_name, v.table_name,
v.monitoring, v.used,
start_monitoring, end_monitoring
FROM v$object_usage v, dba_indexes u
WHERE v.index_name = u.index_name
AND v.index_name = 'IDX_TAB1_ACODE';
INDEX_NAME TABLE_NAME MON USE START_MONITORING END_MONITORING
IDX_TAB1_ACODE TAB1 YES NO 05/26/2010 14:13:41
Elapsed: 00:00:00.10
Edited by: user12158503 on May 26, 2010 1:24 PM

Thanks Centinul.
I apologize for posting in both sections. I put it in the Database General too because I thought I originally posted it in the wrong section.
The index was not being used because it was doing the implicit type conversion. When I enclosed it in quotes, it returns the result within a second and it uses the index.(whereas without the index it takes around 1min 25 sec)
Here is the explain plan and execution time after enclosing it in quotes -
SQL> explain plan for
2 SELECT COUNT(1)
3 FROM TAB1 p
4 WHERE p.AKey = '24377'
5 AND NOT EXISTS (SELECT 1 FROM TAB2 ph where ph.PKey = p.AgilityKey )
6 AND NOT EXISTS (SELECT 1 FROM TAB3 phs where phs.PKey = p.AgilityKey )
7 AND p.rflag = 'Y';
Explained.
Elapsed: 00:00:00.02
SQL> @$ORACLE_HOME/rdbms/admin/utlxpls.sql
PLAN_TABLE_OUTPUT
Plan hash value: 2008452282
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 87 | 5134 (1)| 00:01:02 |
| 1 | SORT AGGREGATE | | 1 | 87 | | |
|* 2 | HASH JOIN ANTI | | 1 | 87 | 5134 (1)| 00:01:02 |
|* 3 | HASH JOIN ANTI | | 1 | 60 | 60 (2)| 00:00:01 |
|* 4 | TABLE ACCESS BY INDEX ROWID| TAB1 | 1 | 32 | 6 (0)| 00:00:01 |
|* 5 | INDEX RANGE SCAN | IDX_TAB1_AKey | 4 | | 1 (0)| 00:00:01 |
| 6 | INDEX FAST FULL SCAN | PK_TAB3 | 29918 | 818K| 53 (0)| 00:00:01 |
| 7 | INDEX FAST FULL SCAN | PK_TAB2 | 3199K| 82M| 5059 (1)| 00:01:01 |
Predicate Information (identified by operation id):
2 - access("PH"."PKey"="P"."AGILITYKEY")
3 - access("PHS"."PKey"="P"."AGILITYKEY")
4 - filter("P"."rflag"='Y')
5 - access("P"."AKey"='24377')
22 rows selected.
Elapsed: 00:00:00.02
SQL> SELECT COUNT(1)
2 FROM TAB1 p
3 WHERE p.AKey = '24377'
4 AND NOT EXISTS (SELECT 1 FROM TAB2 ph where ph.PKey = p.AgilityKey )
5 AND NOT EXISTS (SELECT 1 FROM TAB3 phs where phs.PKey = p.AgilityKey )
6 AND p.rflag = 'Y';
COUNT(1)
1
Elapsed: 00:00:00.52
Can you give me some tips on where I could read about learning to understand the explain plan. I did read a few articles which did help me, but not much. I am looking for something in detail.

Index not being used in group by.

Here is the scenario with examples. Big table 333 to 500 million rows in the table. Statistics are gathered. Histograms are there. Index is not being used though. Why?
CREATE TABLE "XXFOCUS"."some_huge_data_table"
   ( "ORG_ID" NUMBER NOT NULL ENABLE,
"PARTNERID" VARCHAR2(30) NOT NULL ENABLE,
"EDI_END_DATE" DATE NOT NULL ENABLE,
"CUSTOMER_ITEM_NUMBER" VARCHAR2(50) NOT NULL ENABLE,
"STORE_NUMBER" VARCHAR2(10) NOT NULL ENABLE,
"EDI_START_DATE" DATE,
"QTY_SOLD_UNIT" NUMBER(7,0),
"QTY_ON_ORDER_UNIT" NUMBER(7,0),
"QTY_ON_ORDER_AMT" NUMBER(10,2),
"QTY_ON_HAND_AMT" NUMBER(10,2),
"QTY_ON_HAND_UNIT" NUMBER(7,0),
"QTY_SOLD_AMT" NUMBER(10,2),
"QTY_RECEIVED_UNIT" NUMBER(7,0),
"QTY_RECEIVED_AMT" NUMBER(10,2),
"QTY_REQUISITION_RDC_UNIT" NUMBER(7,0),
     "QTY_REQUISITION_RDC_AMT" NUMBER(10,2),
     "QTY_REQUISITION_RCVD_UNIT" NUMBER(7,0),
     "QTY_REQUISITION_RCVD_AMT" NUMBER(10,2),
     "INSERTED_DATE" DATE,
     "UPDATED_DATE" DATE,
     "CUSTOMER_WEEK" NUMBER,
     "CUSTOMER_MONTH" NUMBER,
     "CUSTOMER_QUARTER" NUMBER,
     "CUSTOMER_YEAR" NUMBER,
     "CUSTOMER_ID" NUMBER,
     "MONTH_NAME" VARCHAR2(3),
     "ORG_WEEK" NUMBER,
     "ORG_MONTH" NUMBER,
     "ORG_QUARTER" NUMBER,
     "ORG_YEAR" NUMBER,
     "SITE_ID" NUMBER,
     "ITEM_ID" NUMBER,
     "ITEM_COST" NUMBER,
     "UNIT_PRICE" NUMBER,
      CONSTRAINT "some_huge_data_table_PK" PRIMARY KEY ("ORG_ID", "PARTNERID", "EDI_END_DATE", "CUSTOMER_ITEM_NUMBER", "STORE_NUMBER")
USING INDEX TABLESPACE "xxxxx" ENABLE,
      CONSTRAINT "some_huge_data_table_CK_START_DATE" CHECK (edi_end_date - edi_start_date = 6) ENABLE
SQL*Plus: Release 11.2.0.2.0 Production on Fri Sep 14 12:11:16 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> SELECT num_rows FROM user_tables s WHERE s.table_name = 'some_huge_data_table';
NUM_ROWS
333338434
SQL> SELECT MAX(edi_end_date)
2    FROM some_huge_data_table p
3   WHERE p.org_id = some_number
4     AND p.partnerid = 'some_string';
MAX(EDI_E
13-MAY-12
Elapsed: 00:00:00.00
SQL> explain plan for
2 SELECT MAX(edi_end_date)
3    FROM some_huge_data_table p
4   WHERE p.org_id = some_number
5     AND p.partnerid = 'some_string';
Explained.
SQL> /
PLAN_TABLE_OUTPUT
Plan hash value: 2104157595
| Id | Operation                    | Name        | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT             |             |     1 |    22 |     4   (0)| 00:00:01 |
|   1 | SORT AGGREGATE              |             |     1 |    22 |            |          |
|   2 |   FIRST ROW                  |             |     1 |    22 |     4   (0)| 00:00:01 |
|* 3 |    INDEX RANGE SCAN (MIN/MAX)| some_huge_data_table_PK |     1 |    22 |     4   (0)| 00:00:01 |
SQL> explain plan for
2 SELECT MAX(edi_end_date),
3         org_id,
4         partnerid
5    FROM some_huge_data_table
6   GROUP BY org_id,
7            partnerid;
Explained.
PLAN_TABLE_OUTPUT
Plan hash value: 3950336305
| Id | Operation          | Name     | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT   |          |     2 |    44 | 1605K (1)| 05:21:03 |
|   1 | HASH GROUP BY     |          |     2 |    44 | 1605K (1)| 05:21:03 |
|   2 |   TABLE ACCESS FULL| some_huge_data_table |   333M| 6993M| 1592K (1)| 05:18:33 |
-------------------------------------------------------------------------------                     Why wouldn't it use the index in the group by? If I write a loop to query for different partnerid (there are only three), the whole things takes less than a second. Any help is appreciated.
btw, I gave the index hint too. Didn't work. Version mentioned in the example.
Edited by: RPuttagunta on Sep 14, 2012 11:24 AM
Edited by: RPuttagunta on Sep 14, 2012 11:26 AM
the actual names are 'scrubbed' for obvious reasons. Don't worry, I didn't name the tables in mixed case.

Jonathan,
Thank you for your input. Forgot about this issue since ended up creating an MV since, the view was slower. But either way, I am curious. Here are the results for your questions.
SQL> SELECT last_analyzed,
2         blocks
3    FROM user_tables s
4   WHERE s.table_name = 'huge_data';
LAST_ANAL     BLOCKS
14-MAY-12    5869281
SQL> SELECT last_analyzed,
2         leaf_blocks
3    FROM user_indexes i
4   WHERE i.table_name = 'huge_data';
LAST_ANAL LEAF_BLOCKS
14-MAY-12     2887925
SQL>It looks like stale statistics from the last_analyzed, but, they really aren't. This is a development database and that was the last time around which it was refreshed. And the stats are right (at least the approx_no_of_blocks and num_rows etc).
No other data came into the table after.
Also,
1). I thought I don't have any particular optimizer parameters, but, checking back I do. fastfull_scan_enabled = false. Could that be it?
SQL> SELECT a.name,
2         a.value,
3         a.display_value,
4         a.isdefault,
5         a.isses_modifiable
6    FROM v$parameter a
7   WHERE a.name LIKE '\_%' ESCAPE '\';
NAME                           VALUE                          DISPLAY_VALUE   ISDEFAULT       ISSES
_disable_fast_validate         TRUE                           TRUE            FALSE           TRUE
_system_trig_enabled           TRUE                           TRUE            FALSE           FALSE
_sort_elimination_cost_ratio   5                              5               FALSE           TRUE
_b_tree_bitmap_plans           FALSE                          FALSE           FALSE           TRUE
_fast_full_scan_enabled        FALSE                          FALSE           FALSE           TRUE
_index_join_enabled            FALSE                          FALSE           FALSE           TRUE
_like_with_bind_as_equality    TRUE                           TRUE            FALSE           TRUE
_optimizer_autostats_job       FALSE                          FALSE           FALSE           FALSE
_connect_by_use_union_all      OLD_PLAN_MODE                  OLD_PLAN_MODE   FALSE           TRUE
_trace_files_public            TRUE                           TRUE            FALSE           FALSE
10 rows selected.
SQL>As, you might have guessed, I am not the dba for this db. Should pay more attention to these optimizer parameters.
I know why we had to set connectby_use_union_all hint (due to a bug in 11gR2).
Also, vaguely remember something about the disablefast_validate (something about another major db bug in 11gR2 again), but, not sure why those other parameters are set.
2). Also, I have tried this
SQL> SELECT /*+ index_ss(huge_data_pk) gather_plan_statistics*/
2   MAX(edi_end_date),
3   org_id,
4   partnerid
5    FROM huge_data
6   GROUP BY org_id,
7            partnerid;
MAX(EDI_E     ORG_ID PARTNERID
2 rows
SQL> SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR(null,null,'ALLSTATS LAST'));
PLAN_TABLE_OUTPUT
SQL_ID f3kk8skdyvz7c, child number 0
SELECT /*+ index_ss(huge_data_pk) gather_plan_statistics*/
MAX(edi_end_date), org_id, partnerid   FROM huge_data GROUP BY
org_id,           partnerid
Plan hash value: 3950336305
| Id | Operation          | Name     | Starts | E-Rows | A-Rows |   A-Time   | Buffers | Reads | OMem | 1Mem | Used-Mem |
PLAN_TABLE_OUTPUT
|   0 | SELECT STATEMENT   |          |      1 |        |      2 |00:05:11.31 |    5905K|   5897K|    | |          |
|   1 | HASH GROUP BY     |          |      1 |      2 |      2 |00:05:11.31 |    5905K|   5897K|   964K|   964K| 2304K (0)|
|   2 |   TABLE ACCESS FULL| hug_DATA |      1 |    333M|    334M|00:04:31.44 |    5905K|   5897K|    | |          |
16 rows selected.But, then, I tried this too.
SQL> alter session set "_fast_full_scan_enabled"=true;
Session altered.
SQL> SELECT MAX(edi_end_date),
2         org_id,
3         partnerid
4    FROM hug_data
5   GROUP BY org_id,
6            partnerid;
MAX(EDI_E     ORG_ID PARTNERID
2 rowsAnd this took around 5 minutes too.
PS: This has nothing to do with original question, but, it is plausible to derive the 'huge_data' table name from the sql_id? Just curious.

Materialized view not being used in the report

I have had a materialized view (MV) for a particular report. Recently, the report definition has changed little bit, so the existing MV is not being used by the report anymore. I copied the code Discoverer's SQL Inspection and recreated the materialized view. But still it is not working. Obviously, I am missing something at the database level. Does anyone have any idea? The database is 9i and Discoverer is 9.0.2. Thank you!

The SQL that you see from the Inspect SQL option will provide you with the SQL that Discoverer sends to the database. The database then may do a query rewrite to point to an available materialized view if available. This rewrite won't be seen from the inspect sql option. You need to check at the database level to verify if a query rewrite did in fact take place.
You may want to check the section titled "Query Rewrite with Materialized Views" from Ch1 - "Introduction to the Optimizer" in the Oracle9i Database Performance Tuning Guide and Reference, Release 2 (9.2), Part Number A96533-02, available at http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96533/optimops.htm#37287
Regards
Abhinav Agarwal
Oracle Business Intelligence Product Management
http://www.oracle.com/bi
http://www.oracle.com/technology/documentation/bi_ee.html
http://www.oracle.com/technology/software/products/ias/htdocs/101320bi.html
http://oraclebi.blogspot.com/

How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activ

How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activated. HELP? I really need to continue using this product for my home business.It works fine not activated but the threat is that it will stop working in 13 more days if I don't get it activated, and none of the activation methods they list seem to work.

The new serial number is to the right of your chosen download.

[Solved] Xorg log says Option "AccelMethod" is not being used

I am using Arch for about 3 weeks now. I initially got some problems for setting up my xorg.conf with correct resolution but i solved it.
Today i looked my Xorg.0.log and find that Option "AccelMethod" is not being used.
So please help me in setting up my xorg.conf correctly.
Xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "DontZap" "false"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "dri2"
Load "record"
Load "glx"
Load "dri"
Load "dbe"
Load "ddc"
Load "i2c"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Samsung"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 80.0
VertRefresh 60.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
#Option "RenderAccel" "true"
Option "AccelMethod" "UXA"
#Option "ExaNoComposite" "false"
Option "DRI" "true"
Identifier "Card0"
DRIVER "intel"
VendorName "Intel Corporation"
BoardName "82946GZ/GL Integrated Graphics Controller"
BusID "PCI:0:2:0"
#Option "PanelSize" "1024x768"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
My Xorg.0.log is
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux puvana 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009 x86_64
Build Date: 18 July 2009 03:49:37PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 1 12:36:07 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(==) No device specified for screen "Screen0".
Using the first device section listed.
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "DontZap" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0xb40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2972:8086:5354 Intel Corporation 82946GZ/GL Integrated Graphics Controller rev 2, Mem @ 0x50100000/1048576, 0x40000000/268435456, I/O @ 0x000020e0/8
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 2.7.99
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
IGDNG_M
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "DRI" "true"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 946GZ
(--) intel(0): Chipset: "946GZ"
(--) intel(0): Linear framebuffer at 0x40000000
(--) intel(0): IO registers at addr 0x50100000 size 1048576
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): No SDVO device is found in VBT
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "SAM", prod id 279
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "SAM", prod id 279
(II) intel(0): Output VGA connected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output VGA using initial mode 1024x768
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 7676 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (310, 230) mm
(**) intel(0): DPI set to (83, 84)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000000 to 0x00000020
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x00000307
(WW) intel(0): PIPEASTAT before: status:
(WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS DLINE_COMPARE_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(II) Loading sub module "dri2"
(II) LoadModule: "dri2"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri2.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 238848 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 955388 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x0077f000: end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000: start of memory manager
(II) intel(0): 0x0079f000-0x00a9efff: front buffer (3072 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000: end of memory manager
(WW) intel(0): ESR is 0x00000001
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(**) Option "dpms"
(**) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(WW) intel(0): Option "AccelMethod" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 312 x 234
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device ImExPS/2 Logitech Explorer Mouse
(**) ImExPS/2 Logitech Explorer Mouse: always reports core events
(**) ImExPS/2 Logitech Explorer Mouse: Device: "/dev/input/event14"
(II) ImExPS/2 Logitech Explorer Mouse: Found 5 mouse buttons
(II) ImExPS/2 Logitech Explorer Mouse: Found x and y relative axes
(II) ImExPS/2 Logitech Explorer Mouse: Found scroll wheel(s)
(II) ImExPS/2 Logitech Explorer Mouse: Configuring as mouse
(**) ImExPS/2 Logitech Explorer Mouse: YAxisMapping: buttons 4 and 5
(**) ImExPS/2 Logitech Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImExPS/2 Logitech Explorer Mouse" (type: MOUSE)
(**) ImExPS/2 Logitech Explorer Mouse: (accel) keeping acceleration scheme 1
(**) ImExPS/2 Logitech Explorer Mouse: (accel) filter chain progression: 2.00
(**) ImExPS/2 Logitech Explorer Mouse: (accel) filter stage 0: 20.00 ms
(**) ImExPS/2 Logitech Explorer Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
lved
Last edited by bharani (2009-08-02 11:49:37)

The latest intel drivers only support UXA, so any AccelMethod option is ignored, as you can't set anything else than UXA.

Bought a Mac Mini. at 18 day's old it started to lock up and not function. Took it in and they wiped and reinstalled it. Well at 24 day's old it's been sitting in the box not being used. First and last Mac for me. But can I get something for the junk?

I have pulled it out of the box and put 2 Mac approved mem sticks in it to boost it to 8 Gigs mem and it still locks up and freazes.. So many people told me Mac was the way to go... 1500 dollers could have bought me a great pc laptop. Now I have a wirless mouse keyboard and a mac mini (aka Brick) that allowed me to donate money to a cause that is helping buildings and companies out side of the US. While I have junk.. It's still under warranty and I reinstalled the os after the new mem sticks. Again.. locks up and does nothing. What can I do with this? Toss it in the trash? Any info on what I might do with it.. Please help!

It would be most helpful if you updated your system information:
Please reconcile the following
at 18 day's old it started to lock up and not function. Took it in and they wiped and reinstalled it. Well at 24 day's old it's been sitting in the box not being used.
... I reinstalled the os after the new mem sticks.
If your Mini is anything less than six months old it would be running Lion, not 10.6.1, nor would it have been necessary to "reinstall the OS". Any help that anyone can provide is predicated on your system configuration so it's important.
If you are running Lion then boot your Mini while holding the D key. This will load Apple Hardware Test which will enable you to test your memory. "Mac approved" memory is sort of vague, and even memory that is allegedly designed to meet your Mini's specification may fail. There few reputable memory vendors.
"Apple installed" memory is more meaningful, and indicates Apple has tested it and guarantees its function. Otherwise all bets are off with a claim of "Mac approved". You will have to verify that yourself with Apple Hardware Test.
If your Mini was running, or ever ran OS 10.6.1 for that matter, it is close to three years old.
You must clear up these uncertainties before anyone can help.

Fairly new battery not charging after not being used for a while

My computer (Elitebook 2530p) has not been used for a while, perhaps a month or two. The battery used to hold for over 3 hours of light use.
Now, the battery won't charge with the message "0% available (plugged in, not charging)"
I can't find a battery refresh utility in the BIOS, or any way to interact with the battery. Is there something I'm missing? Should the battery just go dead after not being used for a while?
Update: fixed typo

I've run the HP battery check and got the code REOOW. Battery is dead, and I am out of warranty. I can't think of any possible reason why this should have happened.
What does this code (REOOW) mean?

Target parameter is not being used

Similar Messages

Maybe you are looking for