Taskkill /F broken in windows 8 when applied to a process that crashes on exiting

It appears that Windows 8 has broken the taskkill command in part at least (actually, I think it is more likely a broken ability to set the debug attribute, which in prior Windows versions allowed taskkill to kill programs even if in a different security
context; but I don't know exactly how to test that or prove my hypothesis).  When attempting to kill a process that is hung on exit (e.g., attempted a normal exit from the program, but it hangs and fails to exit, and continues to consume system resources),
there appears to be no way to terminate the application/service, and an "access denied" error is generated even though run from the administrator command prompt.
I have had this happen now many times with chrome.exe (which seems to have lots of issues with Windows 8 in general, but especially when exiting), as well as Skype.exe (a perpetual problem child program under any system).  It is repeatable if you can
get any program to crash/hang on exit:
(1) start a bunch of chrome.exe windows, especially ones that require resources like scripts, and then attempt to exit chrome window by window - this will cause chrome to crash on exit 5/10 times.  Confirm hung process via ctr-shift-esc and see
that at least one chrome task is still running (chrome window may or may not still be visible)
(2) From the administrator command line: "taskkill /IM chrome /F" which will give the access denied error.
(3) psutils is also unsuccessful: pskill chrome /F also gives same error (run from administrator command prompt)
As I understand prior Windows releases, there is a debug attribute that was set by these particular utilities (under Windows 7 and earlier) which allowed taskkill and pskill to kill processes even when the task manager failed to do so.  It seems
that something is broken under Windows 8 now in that regard.
Any ideas how to fix?  is there a registry fix?  Another utility that works under Windows 8?
JeffN

Hi,
I tried the command in Windows 8, it works with no problem. I can even kill explorer.
Juke Chou
TechNet Community Support
The problem is with killing certain "runaway" processes.  I can kill chrome just fine ... until it crashes!  Once it crashes, it is unkillable.  Something is not right.
JeffN

Similar Messages

  • On Windows XP SP3, Firefox 17.0.1 crashes upon exit with this error: "The instruction at "0x7c84495d" referenced memory at "0xf94d9326". The mem could not be r

    Here is the error in total: "The instruction at "0x7c84495d" referenced memory at "0xf94d9326". The memory could not be "read. I have tested this on several of our workstations, all with the same error.
    I have started FF in Safe Mode and the error comes up. I've uninstalled it, renamed the install directory and still the error persists. I've updated the plugins to no avail. In Windows 7, this issue does not occur. Since it crashed upon exit, the Crash Recorder doesn't come up.

    I've already started Firefox in Safemode and the same issue persists. I've also gone in and manually disabled all add-ons and againk the same issue.

  • IPhoto broken - Empty window when I open the application - Help needed

    Hi Guys,
    Since my upgrade to Snow Leopard my iPhoto 09 has been completely broken. What I get when I start it up is an empty window. No pictures on the right pane and no menus on the left pane. I read many threads about iPhoto issues, and so I have tried to rebuild the library, reinstall iPhoto from the disk I got with my mac. Still the same problem: On startup, iPhoto opens with a completely blank window. All I have are the three buttons at the bottom left side of the window (+, info and enlarge). Only if I click "+" to add a new album the menus on the left pane (events, photos...) appear. A few clicks on these menus and iPhoto crashes. All this, done with a new, clean library. I moved the old one, and keep it for the day I'll get iPhoto to work again. Hope you guys can help. This is painfully frustrating.

    Thanks for help Terrence
    I am using Suitcase Fusion 2 and just activitating Helvetica Neue in Suitcase seemed to fix this problem I have had for several months.
    I highly recommend doing the activation in Suitcase instead of just droping it into the System Fonts folder. This will allow for Suitcase to activate or deactivate the font. If you put the font into one of your folders, Suitcase can not deactivate, which might be necessary if your job uses a different version of Helvetica Neue.

  • Is it possible to keep Firefox open after all windows have closed (and to additionally open a new window when starting another Firefox process)?

    Yes, yes, I know, it's not good to keep applications open when they aren't designed to be. I'm sure Firefox has some memory leaks and this is doing more harm than good, but...
    My computer isn't the greatest out there, and to increase the usability of my Firefox browser it would be nice to keep the firefox.exe process open, even after closing all windows. I know Firefox doesn't totally close if there is at least one Firefox-related window open, but having to open X popup window seems a bit extreme to get this effect.
    Additionally, to allow another window to be opened, it would be cool for the "OH NO FIREFOX IS STILL OPEN" prompts to be replaced with just attempting to open a new window, if this feature is enabled.
    So, if it exists already, is there a config variable for it, and if it doesn't exist, is it possible to perform somehow? I'm not afraid to get my hands dirty if it comes to it; I'd really like to get this happening.
    I'm running Windows 7 Home, if it matters. (I'd rather be running another OS, but this is neither the time nor place...)

    LINK: https://addons.mozilla.org/en-US/firefox/addon/minimizetotray-revived/

  • Since upgrading to 3.6.13, Firefox no longer saves and restores windows when I quit.

    I am running OS 10.5.8 on MacBook Firefox 3.6.13. Periodically I have a problem with Verizon e-mail in that it wont accept an address when composing. This is fixed by quitting Firefox. (This problem predates 3.6.13.) It is a nuisance to lose all windows when I quit Firefox, but that is the only way I have found to fix the e-mail problem.

    I'll try to make this clear. I USED to be able to left click on a hyper link and the hyper link would open in a NEW tab. Now for some unknown reason the hyper link by default opens in the same tab (window). I have to right click the hyper link in order for it to open in a NEW tab. (Yes, my 'tools'> 'options'> 'tabs' are set to "open new windows in a new tab." (Please no answers telling me to get rid of the Ask toolbar because I don't have one.) Thank you.

  • EAS background processes status window is not listing the processes

    Hi All,
    When I choose to run a calc/report script at the background in EAS i dont see that process in the background process status window, it is just blank. but when i goto the session window to check, the process is still running. So background process status window is not list any processes that are chose to run at the background. Did anybody have this issue? Really appreciate your help to solve this problem.
    We are using Essbase 11.1.2.1. The issue is in the nonprod environment but it works fine in the prod environment which is running the same version.
    Thanks for you help..
    MD

    Hi Shiva,
    When I run a calc from EAS and If I choose to run at the background, I should see that process and all previous processes that were run at the background in "Background Process Status" window but i don't see anything there. What do I need to do in ESSVR?
    Hi Celvin,
    This is the JRE version and same in prod too.
    java version "1.6.0_20"
    Java(TM) SE Runtime Environment (build 1.6.0_20-b02)
    Oracle JRockit(R) (build R28.0.2-11-135406-1.6.0_20-20100624-2119-linux-x86_64, compiled mode)
    Thanks

  • Firefox had a problem and crashed. We'll try to restore your tabs and windows when it restarts.

    do not know what's going on but the Firefox crashing, and is still crashing, and crashing back again ..
    This problem is not resolved for a long time 'and I wonder why not fix this problem so far?
    These details.
    We're Sorry
    Firefox had a problem and crashed. We'll try to restore your tabs and windows when it restarts.
    To help us diagnose and fix the problem, you can send us a crash report.

    I was having the same problem.... But I keep forgetting that when you upgrade firefox... or it updates automatically... you need to right click on the firefox start up icon, go into properties, click on the compatibilities tab, and put a check in the "Run This Program As An Administrator" box, then hit apply. Start Firefox, and it should work OK. Problem is...each time you upgrade firefox and/or I think Adobe flash... you need to make sure that box is checked. This is on Firefox 15.0.1 with Adobe Flash 11.4.402.278 all up to date, Windows 7 64bit. If Firefox has Adobe flash add-on, it needs to run in admin mode or it will crash.

  • I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

    I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

    Hi
    And if You change view - in main "window/view field" so that You see the box-plot structure.
    No exclamation marks there either ?
    and non at the front page ?
    iDVD do not copy Your material - only points to where it is stored. So if on any external hard disks, USB-memories, CDs or DVDs are missing - assetts are broken.
    Or if You changed location of any material or directed iPhoto or iTunes or GarageBand to a new Library - Then iMovie/iDVD also get's lost.
    Yours Bengt W

  • How do I create a hyperlink that will open a new window, when saving a frame file as a pdf?

    I have created a hyper link in Frame using the message URL command in the marker window. I have added the target="_blank"  command after the http url within the marker. But when I then save the frame doc as a pdf and open that pdf from within a browser, when I click on the link in that pdf, it goes to the new link but it does not open in a new window or tab.
    What am I doing wrong?
    I should mention that I am using Frame 10.

    Best solution that I can find to tell you is to get Schlomo Perets' FrameMaker-to-Acrobat TimeSavers 5.0. From the FrameUsers mailing list:
    Schlomo Perets said:
    In FrameMaker-to-Acrobat TimeSavers 5.0, the "new window" link control was extended to optionally display web-based links in a new browser window (Links/General tab, Cross-file links: Open PDF in a new window, Also apply to web links).
    The function can apply to all web links (i.e. no need to modify anything in the FrameMaker file), or to individual links (in which case a special hypertext marker has to be used instead of the standard "message URL http://..." marker).
    For additional info & sample files, see http://www.microtype.com/ImprovePDF10.html
    HTH;
    David

  • How to solve 'java/lang/OutOfMemoryError' when apply weblogic patch 10.3.6.0.10?

    Hi All:  Our platform is IBM AIX power system 64 bit, os level 6.  Oracle Fusion Middleware version is 10.3.6.0.8.  We tried to patch 10.3.6.0.10 on it, but encounter ‘out of memory error’ when  applied WebLogic patch 10.3.6.0.10 on UAT report server.  Currently UAT has 3GB memory (currently is 3G) .
    JVMDUMP006I Processing dump event "systhrow",
    detail "java/lang/OutOfMemoryError
    JVMDUMP032I JVM requested Heap dump using
    '/ora_bin01/u01/oracle/Middleware/utilhd' in response to an event
    JVMDUMP010I Heap dump written to
    /ora_bin01/u01/oracle/Middleware/utils/bsu/heapdump.20150224.152727.6422620.0001.phd
    JVMDUMP032I JVM requested Java dump using
    '/ora_bin01/u01/oracle/Middleware/utils/bsu/javacore.20150224.152727.6422620.0002.txt'
    in response to an event
    JVMDUMP010I Java dump written to
    /ora_bin01/u01/oracle/Middleware/utils/bsu/javacore.20150224.152727.6422620.0002.txt
    JVMDUMP032I JVM requested Snap dump using
    '/ora_bin01/u01/oracle/Middleware/utils/bsu/Snap.20150224.152727.6422620.0003.trc'
    in response to an event
    JVMDUMP006I Processing dump event "systhrow",
    detail "java/lang/OutOfMemoryError" - please wait.
    JVMDUMP010I Snap dump written to
    /ora_bin01/u01/oracle/Middleware/utils/bsu/Snap.20150224.152727.6422620.0003.trc
    JVMDUMP013I Processed dump event "systhrow",
    detail "java/lang/OutOfMemoryError".
    JVMDUMP032I JVM requested Heap dump using
    '/ora_bin01/u01/oracle/Middleware/utils/bsu/heapdump.20150224.152735.6422620.0004.phd'
    in response to an event
    JVMDUMP010I Heap dump written to
    /ora_bin01/u01/oracle/Middleware/utils/bsu/heapdump.20150224.152735.6422620.0004.phd
    JVMDUMP032I JVM requested Java dump using
    '/ora_bin01/u01/oracle/Middleware/utils/bsu/javacore.20150224.152735.6422620.0005.txt'
    in response to an event
    JVMDUMP010I Java dump written to
    /ora_bin01/u01/oracle/Middleware/utils/bsu/javacore.20150224.152735.6422620.0005.txt
    JVMDUMP032I JVM requested Snap dump using
    '/ora_bin01/u01/oracle/Middleware/utils/bsu/Snap.20150224.152735.6422620.0006.trc'
    in response to an event
    Exception in thread "main"
    java.lang.OutOfMemoryError at
    java.lang.StringBuffer.ensureCapacityImpl(StringBuffer.java:335)
    at
    java.lang.StringBuffer.append(StringBuffer.java:201)
    at
    java.lang.Class.throwNoSuchMethodException(Class.java:278)
    at
    java.lang.Class.getMethod(Class.java:845)
    at
    com.bea.cie.common.dao.xbean.XBeanDataHandler.isValueSet(XBeanDataHandler.java:958)
    at
    com.bea.cie.common.dao.xbean.XBeanDataHandler.getValueFromObject(XBeanDataHandler.java:589)
    at
    com.bea.cie.common.dao.xbean.XBeanDataHandler.getSimpleValue(XBeanDataHandler.java:431)
    at
    com.bea.plateng.patch.dao.cat.PatchDependency.getRule(PatchDependency.java:48)
    at
    com.bea.plateng.patch.dao.cat.PatchCatalogHelper.getInvalidatedPatchMap(PatchCatalogHelper.java:1625)
    at com.bea.plateng.patch.PatchSystem.updatePatchCatalog(PatchSystem.java:436)
    at
    com.bea.plateng.patch.PatchSystem.refresh(PatchSystem.java:130)
    at
    com.bea.plateng.patch.PatchSystem.setCacheDir(PatchSystem.java:201)
    at
    com.bea.plateng.patch.Patch.main(Patch.java:281)
    JVMDUMP010I Snap dump written to
    /ora_bin01/u01/oracle/Middleware/utils/bsu/Snap.20150224.152735.6422620.0006.trc
    JVMDUMP013I Processed dump event "systhrow",
    detail "java/lang/OutOfMemoryError".
    Exception in thread "Attach API wait loop"
    java.lang.OutOfMemoryError
       at
    com.ibm.tools.attach.javaSE.CommonDirectory.waitSemaphore(CommonDirectory.java:222)
    at
    com.ibm.tools.attach.javaSE.AttachHandler$WaitLoop.waitForNotification(AttachHandler.java:329)
    at com.ibm.tools.attach.javaSE.AttachHandler$WaitLoop.run(AttachHandler.java:396)
    bsu.sh -install -patch_download_dir=/ora_bin01/u01/oracle/Middleware/utils/bsu/cache_dir -patchlist=12UV -prod_dir=/ora_bin01/u01/oracle/Middleware/wlserver_10.3
    we followed the README.txt instructions, and stop/start weblogic service before/after apply patch. Can anyone suggest a solution or Doc ID for helping us?
    thank you very much!

    Solutions: Bounce the applications and check the arguments if you can increase it.  It is due to memory issue
    You can set these values in CommEnv.sh (.cmd for windows) file located in the weblogic_home/common/bin directory.
    This gets applied to all the domains under that wls home.
    If you want to make the changes to specific domain then edit the SetDomainEnv.sh file located under the domain/bin directory.
    How to solve java.lang.OutOfMemoryError: Java heap space
    solutions:  export JVM_ARGS="-Xms1024m -Xmx1024m"
    How to solve java.lang.OutOfMemoryError: PermGen space
    solution : export JVM_ARGS="-XX:PermSize=64M -XX:MaxPermSize=256m"

  • Bridge crashes when applying metadata

    I'm seeking guidance, but let me preface this post with some information:
    CS6 via Creative Cloud
    All applications up to date via Adobe Application Manager
    All Windows Updates applied including drivers.
    Currently running Bridge 5.0.2.4
    Computer is:
    Win 7 Pro (64 bit)
    Core i5
    12 Gb RAM
    NVIDIA GeForce 310
    I have used CS6 for months prior to this issue starting without incident.
    I have tried moving the data to different drives.
    I have checked/cleared/reset file permissions.
    I have run drive error checks.
    I have uninstalled/CC cleaner/reisntalled all Adobe products multiple times.
    I have run Bridge in 32-bit and 64-bit modes.
    I have tried to reset preferences and other "Ctrl" startup options.
    I have tried to reset preferences and other "Ctrl" startup options after selecing "Run As Administrator".
    I manually deleted the ".BridgeCache" and ".BridgeCacheT" files from the folder of photos.
    Prior to this crashing problem I had already sorted and begun to apply ratings to files (Reject and Start ratings) in this folder without incident.  I even applied metadata (Keywords) to a portion of the 1,321 photos in a folder without incident.  The problem started when I came back the next day and started up work again.  There had been no updates or restarts to the computer.  The only thing that I think updated was Adobe Acrobat, but I cannot be sure.  When I opened Bridge and began to apply Keywords to files the program simply locked up and immediately crashed.  The Windows dialog box did not have any information or options for a crash report.
    This is a normal workfolw that I utilize on a regular (weekly/monthly) basis and why the crashing is happening is beyond me.  I have attempted to troubleshoot many different ways.  Of particular note I when to a different folder of photos that had never been worked on before with Bridge and was able to apply the same workflow without incident.
    Here is an excerpt from the Windows Event Viewer:
    Faulting application name: Bridge.exe, version: 5.0.2.4, time stamp: 0x50d9a019
    Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
    Exception code: 0xc0000374
    Fault offset: 0x00000000000c40f2
    Faulting process id: 0x12d0
    Faulting application start time: 0x01ce461c31a0ba90
    Faulting application path: C:\Program Files\Adobe\Adobe Bridge CS6 (64 Bit)\Bridge.exe
    Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
    Report Id: 60e3cf2b-b210-11e2-834c-f04da2db0ae0
    At this time I cannot difinitively confirm that the files themselves are causing the issue but I will attempt some additional troubleshooting.  At this point I'm not overly impatient because I've already lost the revenue opportunity for selling these photos to customers because the error first started several days ago (4/28/2013 09:31:35 PM was first crash).  However, at this point I am will not entertain the wasting of time by uninstalling all Adobe products, running CC cleaner, and re-installing the products I use.
    Does anyone have any suggestions for me to try for resolution or troubleshooting? 

    I'm wondering if it could be the SD card?  Mine was a cheap brand and I wonder if the invalid handler could be the issue.
    No experience with all of this, use a Mac, Canon and a CF card that I place in a Card reader and use import via Adobe Photodownloader.
    But here is my question, what do you do you with the SD card when your files are copied to the system?
    My workflow is to import the files (including convert to DNG and back up original Raw to second disk, renaming and copyright template)
    But when I have checked my files are OK on the system and I need the CF card for a new job I always put the card back in the camera and use the camera menu itself to format the card.
    I long ago stopped using the delete all function because this used to build up certain data files and that is not the case when you use format.
    I do so every time and while I have used a lot of CF cards (from 128 MB in 2001 to current 32 GB Sandisk Extreme Pro UDMA 7) The only problems I had was losing them.
    Never managed to break one down (not even in the washing machine…) and from about 2003 I always have used the format method for every time I needed to remove the files from the card.
    I don't know much about the difference between inferior manufactures and the superior brands, I find it hard to believe that this would cause your problem alone (If you did not format I would try that first).
    Having said that I would never choose to use other then top quality cards like Lexar and Sandisk and also the fastest or the nearly fastest.
    If you have a cheap compact camera (but then you probably would not visit this forum…) I can image (but do not approve) you include a cheap SD card also. But spending up to 1000 dollar or much more for a nice dSLR and save money on a cheap card instead of using a trustful medium to write your precious files on is not the best workflow.
    CF cards and SD card are very cheap nowadays.
    To compare, the 128 MB in 2001 was about 600 dollar, the super fast and reliable Sandisk Extreme Pro 32 GB was around 200 dollars.
    You can do the math yourself but on my calculator this means three times as cheap while 256 times more space…

  • Error when applying opatch

    Recently upgraded from Oracle 10.2.0.1 to 10.2.0.5 & since then i cant run OEM, so oracle suggested Apply Patch 8350262 to your Oracle Home installation using OPatch.
    OS : Windows 2003 32 bit
    DB : Oracle 10.2.0.5
    I get below error when apply opatch.
    C:\oracle\product\10.2.0\db_1\OPatch>opatch apply 8350262
    Invoking OPatch 10.2.0.4.9
    Oracle Interim Patch Installer version 10.2.0.4.9
    Copyright (c) 2009, Oracle Corporation. All rights reserved.
    Oracle Home : C:\oracle\product\10.2.0\db_1
    Central Inventory : C:\Program Files\Oracle\Inventory
    from : n/a
    OPatch version : 10.2.0.4.9
    OUI version : 10.2.0.5.0
    OUI location : C:\oracle\product\10.2.0\db_1\oui
    Log file location : C:\oracle\product\10.2.0\db_1\cfgtoollogs\opatch\opatch2013-
    01-02_23-02-41PM.log
    Patch history file: C:\oracle\product\10.2.0\db_1\cfgtoollogs\opatch\opatch_hist
    ory.txt
    ApplySession applying interim patch '8350262' to OH 'C:\oracle\product\10.2.0\db
    _1'
    Running prerequisite checks...
    Prerequisite check "CheckApplicable" failed.
    The details are:
    Patch 8350262: Required component(s) missing : [ oracle.sysman.agent.core, 10.2.
    0.4.0a, higher version 10.2.0.5.0a found. ]
    ApplySession failed during prerequisite checks: Prerequisite check "CheckApplica
    ble" failed.
    System intact, OPatch will not attempt to restore the system
    OPatch failed with error code = 74
    C:\oracle\product\10.2.0\db_1\OPatch>
    Any help would be appreciated.
    Thanks,
    Vikhar

    Do you mean this "The patch is also included in 10.2.0.5 database patch 5 and 10.2.0.5.3 (PSU3)" which is quoted in (DOC ID 1222603.1), if so, i have downloaded. However, can you give me patch # for 10.2.0.5 version in order to double check , may be by mistake i download wrong version.
    Thank you,

  • High CPU and Delay when applying metadata

    Hi All:
    I have an issue where my CPU hits 60% when applying keywords. This can be when I apply it to one image or to 100s. Obviously, when I have more pictures selected or more keywords, there is a much larger delay.
    Ideas from anyone?
    Thanks

    Hi All,
    There is a workaround to resolve this issue. As it is related to modifying registry, please be very careful and take backup of your registry first.
    The workaround is to set the value of "Disable Performance Counters" to 0 @ HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\PerfProc\Performance
    If this registry entry is not present, create one. Meanwhile, we are working on fixing this issue.
    Hope this helps!
    Thanks,
    Deepika
    PS: Edit the Registry at your own risk. Inappropriate changes to the Windows Registry can disable the operating system! To safeguard against such an accident, back up your existing registry by choosing Registry » Export Registry File after launching the Registry Editor and before making any changes

  • Colour background images changes when applying effect

    Hey,
    I created a page, with a large background image in the back. When applying an effect (like shadow, or transparency) to text above, the colour of the image below changes, it becomes less saturated. This persist even when exporting and viewing in Acrobat Reader.
    Im using InDesign CS3 with Windows XP SP2
    Greets!

    Try changing your transparency blend space to RGB.
    Bob

  • HELP: Keep Getting Error When Applying Magic Bullet Looks

    get this error when applying Looks.
    "After Effects error: crash occurred while invoking effect plug-in "Looks".
    and then it says
    "After Effects error: Crash in progress. Last logged message was: <2280>
    <MCExportInfo: Destruct> <5> Destruct for 420462944"
    I try to apply Looks to another video and I get a different error saying language registry key. I apply Looks to a third video and I get the dynamiclink error. It's like different error for different video. All 3 videos shot with different cameras.

    Same problem here ! I have Vista 64 bit and Intel 4500 Mhd
    driver. The issue is Magic Bullet Misfire works fine in Adobe After
    Effects CS5 but it crashes with Magic Bullet Looks.
    Have checked OpenGL in AE CS5 which are by default OFF, that is if you open Adobe After Effects CS5 and into edit and then click 'preferences'. Under previews there is ur OpenGL info. Click OpenGL, its says need to update driver or get a better OpenGL above 2.0. I think updating to new OpenGL may fix the issue. I have made a video with Magic Bullet Misfire and it works fine but the issue is with only 'Magic Bullet Looks' presets where the AE crashes.
    So it cant be Windows 7, Vista or 32 bit or 64 bit issue. Probably a driver error or an internal Magic Bullet 1.4 or Adobe After Effects CS5 64 bit error.

Maybe you are looking for

  • Data guard synchronization after link down b/w primary and physical standby

    Hi All, I have configured data guard on oracle 11gr2 db. Normally switchover between my primary and physical standby happens smoothly and the Apply lag would be zero. Recently We had to test a scenario when the network link between Primary and Physic

  • Unable to view MMS in message conversations. Do they expire?

    +iPhone 3GS 16GB running Firmware 3.1.2 on O2 UK. (5GB+ Free Space)+ *I am unable to view older MMS on my iPhone.* Earlier in the week a friend sent me some MMS, but since then has text everyday, when I scroll to the top of conversation to view the M

  • 20"/24" iMac hang at desktop?

    We have three 24" iMacs here at work, and one 20". The 20" and two of the 24" iMac's have hung at boot up, all at the same place. As soon as the desktop starts to load, the Spotlight magnifying glass comes up then the machine sits there and stops boo

  • Performance Appraisal Template Error

    Hi All, I have modified the appraisal Template and trying to create the transport for that but while creating the trasport i am getting error "Error in the OBJS object list of the PD transport object" Can you please help how to resolve this error. Th

  • Saving Colors in Pages

    I can not figure out how to save certain colors in Pages. You can click through a variety of colors, but I do not know how to then use the same color for different parts of a layout. Is there somewhere to put in web color numbers? Am I missing someth