Tasks getting deleted

Hi Experts,
I am facing one problem, for one user his task getting deleted we recovered from recovery but its getting deleted next day.
The MRM has retention 400 days, task created very old but have a new dew date. 
I have created a new task folder and moved the task there, but next day it got deleted. 
What could be causing this? how to fix? i have removed the retention policy for this user to check tomorrow also i have collected logs by enabling outlook logging. 

Hi,
Please check the AutoArchive settings on the Tasks folder: Right click on the Tasks folder,
Properties, AutoArchive. Check if the there's an AutoArchive setting that removed the tasks.
Please also check if there's a 3rd-party add-ins which may influence the Outlook Tasks. By running Outlook in Safe Mode we can test if it's related:
Press Win + R and type “outlook.exe /safe” in the blank box, then press Enter. If in Safe Mode the tasks don't get deleted, disable the suspicious add-ins to verify that.
I'll provide further assistance if the steps above don't help.
Regards,
Melon Chen
TechNet Community Support

Similar Messages

  • Data in BBP_DOCUMENT_TAB are not getting deleted

    Hi All,
    We are in SRM 4.0.
    Since today morning whenever a user trying to create / change shopping cart, PO, GR it got updated in the BBP_DOCUMENT_TAB. But it is not getting deleted automatically. Earlier it used to get deleted automatically once the documents have been ordered.
    But I could see the POs and GRs have been transfered to the back end system.
    Job CLEAN_REQREQ_UP is running every 2 mts.
    Please advise.

    Hi Arun,
    note 338985 describes in detail how the the status of the document(s), CLEAN_REQREQ_UP and the IDOCs interact.
    If the documents are posted without any error i.e. there´s everything perfect but the 'obsolete' entries in BBP_DOCUMENT_TAB, then this sounds like a malfunction.
    Maybe you should debug the the cleaner with one document and see whats happening starting at the following spot:
    CLEAN_REQREQ_UP
    process selected entries: check  existence of follow on documents,
    update if necessary local documents etc. (depends on entry type)
            LOOP AT selarea.
              IF still_to_proc = c_proc_block_size.
                SET UPDATE TASK LOCAL.
              ENDIF.
    lateron the entries are deleted in function module BBP_DELETE_FROM_DOCUMENT_TAB
    Note 535765 describes how to delete entries via a Z* report but I would NOT RECOMMEND to do that without having checked the situation by SAP before.
    see note 535765:
    Please note!:                                                       
    Deleting relevant entries from the BBP_DOCUMENT_TAB may cause severe
    problems, as the system needs the entries to set the right status to
    shopping carts, invoices and confirmations. So please be careful with
    the deletion of entries.                                            
    Kind Regards
    Michael

  • Release  PR Should not get deleted in md51,planning mode 3

    Hi all,
    We are facing a problem in MRP run taken through transaction code MD51. This Problem (as explained below) will occur when MRP control parameter for Planning Mode will be set to u20183u2019 (Delete and recreate planning data).
    During normal course, if MRP control parameter for Planning mode is set to u20183u2019, system deletes all open PR & Planned orders & creates new PR & new planned orders. 
    But in our business scenario, where we have release strategy for MRP generated PR, even these released PR get deleted. This results in re-analysis & releasing of MRP generated PR which itself is a tedious & time consuming task.
    We are looking for a solution where  PR will not get deleted during MRP.
    Thanks
    Sukumar
    Edited by: skumar kalame on Nov 10, 2008 1:59 PM

    Hi,
    The planing time fence is maintained in MRP-1 view of the material in workdays. You can also have this defined in the MRP group. But the value in material master takes precedence over MRP group.
    Use - It is a kind of safety fence which is used to protect any automatic changes to take place for firm order proposals during MRP run.
    Depends on - Firming indicator needs to be maintained for the MRP type. This can be set in customizing for the MRP Type. This basically specifies how you want to firm the order proposals. Please note there are 5 types of firming
    The SAP help for firming type reads as below:
    firming type 0
    The system does not firm procurement proposals automatically.
    firming type 1
    Procurement proposals that move into the planning time fence are firmed automatically, as soon as their date lies at least one day before the end date of the planning time fence. The date of new procurement proposals that are created in the planning time fence is displaced to the end of the planning time fence. These new procurement proposals are not firmed.
    firming type 2
    Procurement proposals that move into the planning time fence are firmed automatically, as soon as their date lies at least one day before the end date of the planning time fence. The system does not create any new procurement proposals within the planning time fence; that means, the system does not balance the shortage situation in the planning time fence.
    firming type 3
    Procurement proposals that move into the planning time fence are not firmed automatically by the system. All procurement proposals that are necessary for requirements coverage are displaced to the end of the planning time fence.
    firming type 4
    Procurement proposals that move into the planning time fence are not firmed automatically by the system. The system does not create any new procurement proposals within the planning time fence; that means, the system does not balance the shortage situation in the planning time fence.
    If helpful award points
    Regards,
    Vivek

  • Workitem not getting deleted from SAP inbox

    Hi ,
    I have a scenario in workflows , in which when a user creates a timesheet , a mail goes to approver , when the timesheet is approved the mail should get automatically deleted .
    We have created a standard task for this purpose ( a copy of TS31000007)  .
    The business Object is CATS , terminating event is COMPLETED , method is APPROVE . There is no triggereing event a FM is being used .
    The standard task is copied in two test environments , from first system the mail gets automatically deleted , but from the second one it is not getting deleted .
    Also the workflow log in SWEL doesnt show any rows in the second system .
    In the first system , there are 4 steps  in the workflow log :
    Dialog work item created
    Background process started
    terminating event received
    work item processing complete
    Though the workitem has deleted , but the status of the workflow is in Progress
    while the second has only two steps in workflow log
    Dialog work item created
    Background process started
    and the workflow status is "Ready"
    I guess the terminating event in the second case is not getting received .
    but ,I have  checked sweinst and found that the instance linkage is activated .
    Also when the workitem is approved , it does not get delete , and if we try to re execute it again , the gives a msg " NO data found "
    Can someone help me to find why the mail is stuck in the inbox and  correct this problem.
    Thanks
    Sheetal

    Unless and until the Terminating event is triggered the workitem will not disappear. Check how the Event is getting triggered in other system. I feel it is getting triggered by standard means. Check whether there is proper settings in SWEHR3.
    It means that you are not doing any special configuration for event triggering or coding. Please check what is missing in the system you are having problem.  Check SWU3 setting is fine or not.
    <b>Please close thread when issue resolved</b>
    Thanks
    Arghadip
    Message was edited by:
            Arghadip Kar

  • Each time I try to start iTunes after it was closed, it wouldn't start. I have to go to the Task Manager delete Apple Push from processes and only after that iTunes statrs again. What is wrong?

    Each time I try to start iTunes after it was closed, it wouldn’t start. I have to go to the Task Manager delete Apple Push from processes and only after that iTunes statrs again. What is wrong

    Did you manage to get it working mine disappeared after I while I managed to download it but now my laptop/iTunes won't recognise my iPhone!

  • OIM AD connector- Groups added natively in AD getting deleted

    We are facing this issue with the OIM Ad connector- 11.1.1.5.0. The scenario is :
    1. OIM user get created
    2. OIM provisions user to AD and adds user to 2 groups ( 1 and 2)
    3. AD Administrator logs into the AD directly and adds 3 groups to the user ( Group3,Group4 and Group5)
    4. OIM admin goes to the resources tab and adds Group6 to the user from within OIM AD resource
    Shouldn't we see that the user account on AD be a member of group1,group2,group3,group4,group5 and group6. This is the expected behavior
    What we are seeing on the account is that only group1,group2 and group6 are visible.
    I understand the the groups - Group3,Group4 and Group5 will not be visible on the resource form unless we do a recon but OIM should not be DELETING groups added natively on AD
    Any help on this issue will be appreciated

    Thanks everyone. I do agree that the behavior should be such that all 6 groups should be visible on the user on the target (AD) system. However, we are seeing that the groups added natively within AD are getting deleted and OIM is "truing up" the user account with the groups that are added within the process form , i.e. the scenario described above. OIM is actually deleting the groups that were added manually on AD.
    If I do trigger a target recon, then I can see that all the groups are reflected on the user within OIM. However running this task every hour or rather every time I need to add an entitlement on a user is not a feasible solution,would you agree?. Also this is a limitation that cannot be placed on a helpdesk person. Rather , if this is the only solution , it should be a functionality of the connector.
    Please note that the connector deployed is v11.1.1.5.0 and NOT the 9.1.1.7. The 9.x connector did behave as expected , i.e it did not delete any groups. However the new ICF based connector is deleting groups. Is there a setting within the connector configuration to turn on/off this functionality?
    This is what I see in the connector server logs
    <VERBOSE>: Class-> ActiveDirectoryUtils, Method -> GetDnFromPath, Message -> Exiting the method. Returning the value = CN=TEST6,CN=Users,DC=OIM,DC=Test,DC=com
    <VERBOSE>: Class-> CustomAttributeHandlers, Method -> UpdateDeFromCa_OpAtt_Groups, Message -> DirectoryEntry path = LDAP://xx.xx.xx.xxx/CN=Print,DC=OIM,DC=Test,DC=com. Removing: CN=TEST6,CN=Users,DC=OIM,DC=Test,DC=com from the property: member
    "PRINT" is the group that was added natively on AD.

  • Email on the IPhone gets deleted when the email is checked on the PC

    Hey all,
    My boss gave me the task of figuring out issues on his IPhone 4G so here I am. He says when he checks an email on his personal computer, that same email gets deleted on his IPhone. We use Windows Mail and I'm sure it's POP. I've googled this in countless different ways with no clear answer so here I am in the Apple forums! He was also curious about saving excel/word documents but from what I've read, you're only able to email them and view them in Safari, correct?

    POP wasn't really designed to be checked from different computers/mobile devices, so this can indeed cause problems sometimes.
    His e-mail client is probably set up in a way that e-mails will be removed from the server as soon as the e-mail is downloaded to the computer (better known as checked).
    If this is the case: he can change the settings of his e-mail client to leave the mail on the server after it has been checked, either for a certain period of time or indefinitely.
    This might however be against company policy, because this will require more server space, if everybody will do this.

  • Emails automatically getting deleted with in 24hrs

    My Email system was all good recently bought an Iphone 6 & started to notice that Emails from my account are getting deleted automatically with in 24hrs & even lesser changed all settings but still couldn't get rid of the problem, Please help me how to get rid of this problem as these are my official emails & I need them to accessable

    Hi,
    I think I had something similar once. The thing I did then was deleted the task and created a new one, and let SAP generate the container elements of the task from the method. Then I inserted and the task in the workflow and did the binding and it worked.
    So maybe an option to try.
    Regards,
    Martin

  • WorkItem getting deleted

    Hi, I have created a workflow for PR release. Approver will get the PR in his SAP inbox, when he click on workitem, it will take him to ME54N, from where he can release the PR.
    The problem I am facing is that, if approver dont perform any action in ME54N, simply come back by pressing the back button, without releasing it, the workItem is getting deleted from his inbox and workflow going to next step. My BO method that is associated with task responsible for that workitem is Dialog and Synchronous method.
    I have also given one terminating event for this task, and raising this event at SAVE button of ME54N, so that pressing BACK button should not delete the Workitem.
    Please suggest the possible cause of this problem. I want workitem only to get delete on SAVE button, not on Back Button.
    If Approver is not releasing it and simply coming back the workitem should remain in his inbox, and workflow should not go to next step.

    Hi,
    You have to use Asynchronous method for requirements like these where you have standard SAP transactions doing the same job as your work item.
    Change your method to synchronous. Also you can refer to WS000000038 workflow for reference as it does the same thing.
    ( Also do compare your terminating events ).
    Regards
    Gautam

  • Deprovisioning Task for Deleted User Removes All Members of AD Group

    Hello all,
    I was wondering if anyone had ever encountered this issue before. We're on 7.1 SP5.
    Here's the setup, we have several privileges that are linked to Active Directory Group membership. We have tasks set up to add or remove a user from the membership list of the AD group that are linked to the Provision and Deprovision tasks on the privilege. This has been working very efficiently for us: when a user is assigned the privilege they are added to the group, and when it is removed they are removed from the group. There are no approvals involved.
    Recently, we've run into an issue that when a user with a privilege gets deleted from the Identity Store, the Deprovision task gets kicked off, but the user DN that is passed in the LDAP task is NULL. This essentially sets the member attribute on the AD Group to NULL, thus removing all members.
    Typically it will throw a warning about deleting obsolete entries and never updates the group. The event tasks seem to be kicked off after the entry is removed from the Identity Store, so it does not seem like a timing issue.
    We've had this up and running for several months, but only recently have we had the issue. It does not seem to be restricted to any group, but it will not happen for all the groups. The users in question have had other privileges corresponding to AD group access, but those groups were not emptied.
    Any help would be appreciated..
    Thanks,
    Jared

    Matt,
    The problem is that this is not being initiated from a task, but form our nightly maintenance job. These users are falling off because of AD updates outside of our system.
    If a DN is deleted from AD, it's already been removed from the groups in AD, but the privileges in our Identity Store haven't synced yet. If we strip all privileges before the entry is deleted, and the DN is no longer valid, the event task will bomb because it is trying to remove a user that doesn't exist anymore.
    I'm thinking of just trapping it in the jobs with a script that checks that the user DN is not null. If it is, just skip the entry.
    And yes, I will be at TechEd.
    Thanks,
    Jared

  • Xellerate organization gets deleted?

    hello,
    I have written a customized scheduler which was removing the AD group resource object from an organization(we have all the ad groups under a single organization as per requirement) but i ont know what is wrong with the configuration in design console that XELLERATE ORGANIZATION is getting deleted and as a result the whole organization is getting deleted. The task scheduler parameters i am giving are:-
    Search Filter     *(objectClass=group)*
    ADCS TimeStamp     *20100104125235.0Z*
    Organization Name     ADDLSORG
    Resource Object     AD Group
    Task Scheduler Name     AD Group Delete Recon
    IT Resource Name     ADITResource
    Search Base     dc=ABC,dc=COM
    Configuration Lookup     Lookup.AD.Configuration
    Search Scope     subtree
    Use Organization Name      yes

    Hi Nilanjan ,
    Sorry for confusing ,I am trying to say there is no any validations only two WBs are viewing and retrieving ,when 2004.TOTAL to check and  retrieve then excel cell values are changing 0s instead of old entries like 99 in allcells ,just check below points
    1. When I open Apshell and select WB example 2004.Periodic it contains 2004.JAN,2004.FEB ...., give data 99 in all cells ,
    2. when 2004.TOTAL to choose and opt Input schedule and save ,again next year like 2006.Periodic the current one data is ok
    3. when I revert back previous one like 2004.TOTAL the values goes "0" its refresh the Input Schedule
    4. when I check SQL its showing negative values . This is the loss of data when I refresh Input Schedule .Please suggest.
    Ex :  TOTAL.2004  ( excel sheet display)
           2004.JAN     2004.FEB      2004.MARCH  ...........
              99                 99                    99
    then select and refresh ,and check TOTAl.2004  select & refresh schedule .
    Next 2006.TOTAL  when add data like same  above it will save .Then we are trying to retrieve previous value(2004.TOTAL) and select 2004.TOTAL the vals shows like
    2004.JAN       2004.FEB  2004.MARCH  ...........
           0.00             0.00            0.00
    When we  check the SQL the data  "SIGNEDDATA" displays''-99.0000' ,'-3.0000' ,like respective vals so on.
    Thankyou
    Regards
    Prabhu

  • Webpart gets deleted once I re-attach a page? :l Help required

    So recently I've been tasked to edit a page that refers to the sharepoint layout but in order for me to do so I always need to detatch the page from the layout,after I've completed my changes I would try to re-attach that certain webpart , however;
    it seems that sharepoint deletes that webpart and it has changed the positioning of my contents :l . What do I do inorder to solve this?
    Thanks and regards,
    Panda

    Depends on the change you have made. 
    Below is example when changes are done but webpart remains on page. If you have to reappy your layout, then webparts will get deleted
    http://office.microsoft.com/en-in/sharepoint-designer-help/customize-a-publishing-page-layout-HA010174129.aspx

  • HT201269 I am trying to save memory on my iPhone 4S/ ios6. Can I back up all photos to icloud and the external hard disk I normally use for photos? If I then delete photos from the iPhone do the get deleted on iCloud?

    I am trying to save memory on my iPhone 4S/ ios6.
    1) Can I back up all photos to icloud and the external hard disk I normally use for photos? If I then delete photos from the iPhone do the get deleted on iCloud?
    2) Can I back up the newsstand to iCloud and save memory on the iPhone?
    3) Can I back up the bookshelf to icloud and save memory on the iPhone?

    1. What format is the external drive? It sounds like it's ina format that Macs can't write to. Is it a NAS or NTFS?
    2. Easiest thing: just move your iPhoto Library to the external
    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • Deleted Item not actually getting deleted or **delay** deleted thus getting refetched (EWS Managed API)

    I am polling Exchange Server to fetch all the mails left in the Inbox and then fetching them, processing them and finally moving them to the deleted folder. My procedure takes following form of EWS Managed API calls:
    1 itemResults = service.FindItems(WellKnownFolderName.Inbox, itemView);
    2 //some code...
    3 service.LoadPropertiesForItems(itemResults.Items, itItemPropSet);
    4 //some code...
    5 foreach(Item item in itemResults)
    6 {
    7 //process item
    8 item.Delete(DeleteMode.MoveToDeletedItems);
    9 }
    To test this code I flooded the inbox with 5000 mails, 5 threads flooding 1000 mails each at the interval of 4ms.
    After test run, I realized some mails are getting processed multiple times.
    When I read the soap traces logged using TraceListener, I realized that when there are more than 100 mails in the inbox, there are more SOAP packets were dispatched in burst of 100s.
    Logically below set of SOAP Packets (let us call it "Set 1") should occur only once:
    <m:FindItem>...</m:FindItem> //generated by line 1
    <m:FindItemResponse>...</m:FindItemResponse> //generated by line 1
    <m:GetItem>...</m:GetItem> //generated by line 3
    <m:GetItemResponse>...</m:GetItemResponse> //generated by line 3
    followed x number of Delete SOAP packets for x number of mails in the Inbox
    <m:DeleteItem>...</m:DeleteItem> //generated by line 8
    <m:DeleteItemRepsonse>...</m:DeleteItemRepsonse> //generated by line 8
    However if there are say 325 mails in the inbox, then there first occurs 4 occurences of Set 1 followed by Delete SOAP packest as follows:
    //1st occurence
    <m:FindItem>100 items</m:FindItem>
    <m:FindItemResponse>100 items</m:FindItemResponse>
    <m:GetItem>100 items</m:GetItem>
    <m:GetItemResponse>35 items</m:GetItemResponse>
    //2nd occurence
    <m:FindItem>100 items</m:FindItem>
    <m:FindItemResponse>100 items</m:FindItemResponse>
    <m:GetItem>100 items</m:GetItem>
    <m:GetItemResponse>35 items</m:GetItemResponse>
    //3rd occurence
    <m:FindItem>100 items</m:FindItem>
    <m:FindItemResponse>100 items</m:FindItemResponse>
    <m:GetItem>100 items</m:GetItem>
    <m:GetItemResponse>100 items</m:GetItemResponse>
    //4th occurence
    <m:FindItem>35 items</m:FindItem>
    <m:FindItemResponse>35 items</m:FindItemResponse>
    <m:GetItem>35 items</m:GetItem>
    <m:GetItemResponse>35 items</m:GetItemResponse> //****followed by 335 occurences of the Delete SOAP packets****<m:DeleteItem>...</m:DeleteItem>  
    <m:DeleteItemRepsonse>...</m:DeleteItemRepsonse> 
    //334 more of above
    So there are 100 + 100 + 100 + 35 = 335 items actually getting handled, which is 10 more than what are actually present in the inbox. 
    Also notice that Delete SOAP packets are queued till end. They are not dispatched in burst.
    First thing I realize dispatching SOAP packets in burst of 100s is EWS Managed API behavior. I guess there must be traffic reason behind it and there must be some configuration setting to tweak it.
    Q1. How can we change this count of 100?
    I inferred that there are some overlaps in fetching of mails.
    So I copy pasted SOAP Traces for first two of
    <m:GetItem>100 items</m:GetItem>
    in two different files, and compared them in text comparer. I realised that some mails that are at the end of the first 100s were reappearing at the beginning of 2nd 100: 
    This is the pattern in many test runs.
    Due to this these overlapping mails, these mails are getting processed twice. Also the attempt to second time delete them was throwing exception : The specified object was not found in the store.
    So I guess there is time delay in delete mail API call and mails actually getting deleted, between which they are getting refetched.
    Q2. How can I handle this to avoid redundant processing of mails and unnecessary exceptions.

    I am polling Exchange Server to fetch all the mails left in the Inbox and then fetching them, processing them and finally moving them to the deleted folder. My procedure takes following form of EWS Managed API calls:
    1 itemResults = service.FindItems(WellKnownFolderName.Inbox, itemView);
    2 //some code...
    3 service.LoadPropertiesForItems(itemResults.Items, itItemPropSet);
    4 //some code...
    5 foreach(Item item in itemResults)
    6 {
    7 //process item
    8 item.Delete(DeleteMode.MoveToDeletedItems);
    9 }
    To test this code I flooded the inbox with 5000 mails, 5 threads flooding 1000 mails each at the interval of 4ms.
    After test run, I realized some mails are getting processed multiple times.
    When I read the soap traces logged using TraceListener, I realized that when there are more than 100 mails in the inbox, there are more SOAP packets were dispatched in burst of 100s.
    Logically below set of SOAP Packets (let us call it "Set 1") should occur only once:
    <m:FindItem>...</m:FindItem> //generated by line 1
    <m:FindItemResponse>...</m:FindItemResponse> //generated by line 1
    <m:GetItem>...</m:GetItem> //generated by line 3
    <m:GetItemResponse>...</m:GetItemResponse> //generated by line 3
    followed x number of Delete SOAP packets for x number of mails in the Inbox
    <m:DeleteItem>...</m:DeleteItem> //generated by line 8
    <m:DeleteItemRepsonse>...</m:DeleteItemRepsonse> //generated by line 8
    However if there are say 325 mails in the inbox, then there first occurs 4 occurences of Set 1 followed by Delete SOAP packest as follows:
    //1st occurence
    <m:FindItem>100 items</m:FindItem>
    <m:FindItemResponse>100 items</m:FindItemResponse>
    <m:GetItem>100 items</m:GetItem>
    <m:GetItemResponse>35 items</m:GetItemResponse>
    //2nd occurence
    <m:FindItem>100 items</m:FindItem>
    <m:FindItemResponse>100 items</m:FindItemResponse>
    <m:GetItem>100 items</m:GetItem>
    <m:GetItemResponse>35 items</m:GetItemResponse>
    //3rd occurence
    <m:FindItem>100 items</m:FindItem>
    <m:FindItemResponse>100 items</m:FindItemResponse>
    <m:GetItem>100 items</m:GetItem>
    <m:GetItemResponse>100 items</m:GetItemResponse>
    //4th occurence
    <m:FindItem>35 items</m:FindItem>
    <m:FindItemResponse>35 items</m:FindItemResponse>
    <m:GetItem>35 items</m:GetItem>
    <m:GetItemResponse>35 items</m:GetItemResponse> //****followed by 335 occurences of the Delete SOAP packets****<m:DeleteItem>...</m:DeleteItem>  
    <m:DeleteItemRepsonse>...</m:DeleteItemRepsonse> 
    //334 more of above
    So there are 100 + 100 + 100 + 35 = 335 items actually getting handled, which is 10 more than what are actually present in the inbox. 
    Also notice that Delete SOAP packets are queued till end. They are not dispatched in burst.
    First thing I realize dispatching SOAP packets in burst of 100s is EWS Managed API behavior. I guess there must be traffic reason behind it and there must be some configuration setting to tweak it.
    Q1. How can we change this count of 100?
    I inferred that there are some overlaps in fetching of mails.
    So I copy pasted SOAP Traces for first two of
    <m:GetItem>100 items</m:GetItem>
    in two different files, and compared them in text comparer. I realised that some mails that are at the end of the first 100s were reappearing at the beginning of 2nd 100: 
    This is the pattern in many test runs.
    Due to this these overlapping mails, these mails are getting processed twice. Also the attempt to second time delete them was throwing exception : The specified object was not found in the store.
    So I guess there is time delay in delete mail API call and mails actually getting deleted, between which they are getting refetched.
    Q2. How can I handle this to avoid redundant processing of mails and unnecessary exceptions.

  • Order category BF not getting deleted in APO

    Hi Experts,
    I have a situation where the material is already deleted in ECC (hence no longer existing), but the product is existing in APO and we need to delete this in APO. To do this, we need to delete the dependent orders for that product/location first and then other dependencies.
    There are few orders for the prod/loc as confirmed purchase orders (ord cat BF). These orders are now PP/DS orders with status as PP firmed, output firmed and date fixed.
    I have tried the two programs- /sapapo/rlcdelete and /sapapo/delete_pp_order, but system is not picking up the orders to delete.
    The system shows as message as " No deletion of converted orders in active version"
    As I said earlier, the product is no longer existing in ECC, hence I can not delete the orders from there.
    Is there any other way to achieve this? Is there any BADI to do this in APO?
    Regards
    Manotosh

    Hi
    You can use /SAPAPO/DELETE_PP_ORDER report for deleting these orders.
    Execute the this report, mention all the products for which you want to delete the order and execute it. It might give the message as orders will not get deleted as inactive in APO.
    Go back please enter as DEL_EXECU, in the place where we use to enter the T-codes and enter and than again execute the report. It will delete the orders.
    You can also try /SAPAPO/SDORDER_DEL report.
    Thanks
    Amol

Maybe you are looking for

  • Cancel and keep workitem in ready state in user decision step

    Hi, In a user decision step,there is a default option 'Cancel and keep the work item'. Now clicking on this option, the workitem goes into "Inprogress state" whereas i want to keep the workitem in "ready state"  after i click on the option 'Cancel an

  • IDocs Msg Types

    Hi I am trying to find the applicable IDoc to use for the following processes: Create A Delivery Replication of Material Master Create A Stock Transfer Order Create a Goods Receipt Create a Goods Issue All of these are to be triggered in one SAP syst

  • App Store - Your request is temporarily unable to be processed

    Hey, when trying to install two apps I got to the point where APP store says "Your request is temporarily unable to be processed." The previous message before that is to accept the new terms and conditions. I say yes and then this is what happens. Tr

  • Missing Text Message history

    I updated my iphone 4 to iOS 6 and now all of my text message history is gone. What happened?

  • How can I edit saved form once I retrieve  it

    I am trying to edit a form i saved then retrieved  from the  cloud