Tax amount not displaying in Condition tab in PO

Hi
I have maintained tax procedure TAXINJ in PO, Tax is input tax 1% CST, Act Key is NVV, cond is JIP1.
But the tax amount is not displaying under the condition tab of the PO in Non-deductible tax (Cond type NAVS).
Plz help me to sort out this issue.
Thanks
Prasant Sekhar

Hi,
In Pricing Scheme do you have any automatic Condition Type that "calls" the tax you maintained in TCODE FTXP?
Cheers.

Similar Messages

  • Withholding tax Amount not being displayed in the Invoice while posting a Parked Document

    Hi,
    I have created a parked document for the Vendor who has the Witholding tax code w9 - 15% . I created Parked Document using FBV1 and then tried posting the same using FBV0.Somehow I am not getting the Withholding tax Amount in the FI Document created. However the W/Tax Base Amount and the W/ Base LC are being displayed correctly.
    Say if the Line item Amount is 1,000$ then both the amounts mentioned above in the Additional tab "Withholding tax Data" are being displayed as 1,000 usd but the W/Tax Amount is 0,00 USD.
    2. Also We have the PI and the Interface is written to post the Parked document while the xml file. There is a Method Execute_Asynchronous which has two BDCs one  for FBV2 ( Change Parked Document ) followed by the Post Parked Document FBV0. Hence When I try to post the Parked Document using the SPROXY Interface which has two BDCs Viz FBV2 & FBV0 I still get the Invoice with the Same Amounts and at times with additional 2 zeros added to it in the Additionsal Tax Data Screen.
    I am not sure what is the reason for this. Can anybody help  me sort out this Issue.
    Can there be any Config issues. Please let me know what all config Settings we need to do to sort out this Issue.
    Also let me know why the 2 Zeros are getting added to the Base Amount e.g if the Vendor Line item is 12,000 USD it shows as 12,00000.00 in the Withholding tax Data  Tab in the Invoice.
    Regards,
    Deepak.

    Dear Praveen,
    please check into IMG if You defined the WT type You are using for Your Comapny code:
    IMG --> Assign Withholding Tax Types to Company Codes
    I hope this helps.
    Mauri

  • Tax code not displaying in me2j - Need Report for PO tax codes

    Dear Guru's,
    For Trading materials, while creating PO, we are inserting Tax codes in "Invoicing Tab". But the same(TAX CODE) is not displaying in ME2J report.
    But For service materials, we are entering tax codes in the "Services Tab" and it is displaying in the report ME2J.
    Kindly tell me a report where we can see the taxcodes for PO.
    Regards,
    deepa

    Sir,
    I did that already, but no code is displaying in that "Tax code Column" for Trading materials.
    But tax code has been entered while creating PO in "Invoicing Tab" as "V0" for example.. V0 is not displaying in ME2J Report.
    Pls. reply
    Edited by: deepa rani on Jun 4, 2008 2:54 PM

  • Income tax amount not coming is payslip

    Dear Experts,
    In remuneration statement the income tax amount is not appearing in deduction window, but where amount is getting deducted from earning.
    As a result the earning minus deduction is mismatch,  i.e. net salary is not correct.
    Ex:
    i.e. Earning 30000
    Deduction 2000
    Net is appearing as 26500. Which is wrong
    the wage type /460 is been maintained in pay slip,
    Value for /460 and /470 is not getting updated in RT table.
    Where as value for /458 and /401 is appearing in RT table.
    can any one share me your ideas where exactly the error might be or what changes to be done.
    Since it is month its an important one.
    Thanks and Regards

    there must be some other salay component which is getting added up in the gross.
    also, check the processing in RT for the cumulative wage types.
    Regards,
    Shruti

  • Conditon value not updating in CONDITION tab for Sales Order

    Hi Experts,
    Can anyone tell me about this ?
    I have created a Z condition type for VA01 and need to place some value (based on some logic  taken from conditon records).
    I am not able to do this.
    Steps already taken care of.
    !) In VOFM >formula section>conditon value = New routine is created.
    2) in V/08, after selecting the Z condition type Routine number is given in front of the Z condition type.
    Waiting....

    Hi Prabhu,
    I didn't understand the meaning of analyzing the Pricing Procedure ?
    In V/08, I have selected the Z condition type created in the system and than selecting that, navigated to CONTROL folder.
    Now in front of the Z condition type in CALCULATION TYPE field the number of the routine is given (Which is created using VOFM).
    Now what else I need to do?
    Repy@Madhu.
    Yes Madhu. Routine is activated and control is stopping if break point given in the routine. In this routine I am trying to populate a value in its XKOMV internal table's KBETR field but when VA01's main CONDITIONS TABS screen comes the value is not appearing.

  • Tax Amounts not Pulling into Order

    We are using Vertex Series Q tax software. When we have taxable line items for the state of Washington, we are get the tax rates back from Vertex but the tax amounts are not calculating. I have tested this for the state of Pennsylvania and I get both the rates and the amounts returned. I can't find anywhere in our SAP instance that would prevent the amounts from populating.
    Am I overlooking something or is this an issue in Vertex not SAP?

    First I recommend to do a testing in the test system. If the same issue happens in test system then I would suggest to check with Vertex support team.
    They can guide you on how to check and what values passed from SAP to Vertex and vice-versa for this particular transmission. This might involve your basis personal also.
    Regards

  • PO conditions are not visible in conditions tab in ME23N

    Hi friends,
    I am facing an issue where the PO conditions tab is showing up as blank. All other tabs are displayed and GR/IR documents are posted correct. On conditions tab analysis of pricing is seen, conditions records are displayed however no conditions displayed on this tab. Also when I try creating a PO using ME21N conditions appear as ****** and I get the error internal number range missing. Can you suggest what can possibly the issue and how to resolve it?
    Thanks in advance!
    - Nutan

    Hi,
    This might be due to authorisations in display prices for PO objects.
    PLease ask Basis to check if Activity "09 - Diaplay Prices" is maintained for below objects in the role assigned to user ID
    M_BEST_BSA <OBJ> Document Type in Purchase Order
    M_BEST_EKG <OBJ> Purchasing Group in Purchase Order
    M_BEST_EKO <OBJ> Purchasing Organization in Purchase Order
    M_BEST_WRK <OBJ> Plant in Purchase Order
    Regards,
    Rakesh

  • Tax codes not displaying in print preview.

    hello,
         i need to display tax codes in the me23n print preview.for that i write  a subroutine pool program and fetch the values. but the values are not displayed. i debuged the subroutine pool program, i found that in output structure itcsy, there are no fields. i hope this is the reason for the values not displayed. please help some one how to display values.
    coding : in script,
    define &g_menge&
    define &g_taxcode&
      perform get_main_details in program z_mm_po_details
    using &ekpo-ebeln&
    using &ekpo-ebelp&
    changing &g_menge&
    changing &g_taxcode&
    endperform
    in subroutine pool program,
    FORM get_main_details TABLES input STRUCTURE itcsy
                                 output STRUCTURE itcsy.

    Hello Kiran,
    <li> We can display LOGO using REUSE_ALV_GRID_DISPLAY only not using REUSE_ALV_LIST_DISPLAY. So when you click on print preview Grid output is displayed as REUSE_ALV_LIST_DISPLAY output. It is confirmed that using ABAP classical or ALV printing LOGO is not possible.
    <li>To print LOGO, you can go for SCRIPTS or SMARTFORMS.
    Thanks
    Venkat.O

  • Total balance amount not displayed correctly

    i have shown my table below my problem is that the balance amount being displayed on form displays the total balance amount and total balance amount being displayed is the sum of all balance amount,hence the final total which iget at the end is incorrect and a huge amount,, while balance amount should be equal to expected amount and total balance amount should be total of all balance amount..less any payments made by the client..
    i have displayed below only the part of script...
    htp.listHeadOpen;
         htp.listHeader('Date',null);
         htp.listHeader('Min',null);
        htp.listHeader('Units',null);
         htp.listHeader('Tx Prof',null);
         htp.listHeader('Prog',null);
         htp.listHeader('Activity Code <img src="/images/cl2_help.gif" ALT="Activity Code Display" height="16" width="16" border="0">',null);
         htp.listHeader('Location',null);
         htp.listHeader('Payor',null);
         htp.listHeader('Auth#',null);
         htp.listHeader('Status',null);
         htp.listHeader('Billed',null);
         htp.listHeader('Billed Amount',null);
         htp.listHeader('Expected Amount',null);
         htp.listHeader('Balance',null);
         htp.listHeadClose;
    --billed
               begin
                  select decode(ci.approved, 'Y', 'Yes', 'No') into h_billed
                     from claim_item ci
                     where claim_item_id in (select claim_item_id
                                                             from claim_item_line cil
                                                             where ci.claim_Item_id = cil.claim_item_id
                                                             and cil.claim_item_line_id = c_claim_item_line_id);
                  exception when no_data_found then
                     h_billed := null;
                  when too_many_rows then
                     h_billed := 'Yes';
               end;
    if c_type in ('C')  then
                  begin
                     select decode(ci.approved, 'Y', 'Yes', 'No') into h_billed
                        from claim_item ci
                        where claim_item_id in (select claim_item_id
                                                                from claim_item_activity cia
                                                                where ci.claim_Item_id = cia.claim_item_id
                                                                and cia.claim_item_activity_id = c_claim_item_line_id);
                     exception when no_data_found then
                        h_billed := null;
                     when too_many_rows then
                        h_billed := 'Yes';
                  end;
               end if;
    --balance amount
               if h_claim_Item_id is not null then
                  begin
                     select balance_amount into h_bal_amt
                        from claim_item
                        where claim_item_id = h_claim_item_id;
                     exception when no_data_found then
                        h_bal_amt := 0;
                  end;
               else
                  h_bal_amt := 0;
               end if;
               if temp_claim_item_id is null or temp_claim_item_id != h_claim_item_id then
            h_total_bal_amt := h_total_bal_amt + nvl(h_bal_amt,0);
           end if;
    htp.listData('<B>Total reflects the client balance for the services listed.  To view the total client balance you must view the Complete Transaction History.  The calculation use for the TOTAL amount is, the total amount of the services on THIS screen minus any payments which have been received and have not been applied to services.</B>',11);
         htp.listData(nvl(to_char((nvl(h_total_bal_amt,0) - nvl(h_cl_bal,0)),'$999,999.90'),0));

    This question probably belongs in the Application server forum under the mod_PLSQL heading.

  • Tasks not displaying in Mail tab

    Have recently started using Thunderbird (been using Outlook 2003) and have installed Lightening add on. I have created a number of tasks (mainly recurring) but they are not displaying in 'Tasks' pane on Thunderbird's main 'email' tab - they all have both Start and Due dates. The Task 'date' is highlighted in the mini-month display but the Task is not listed below in the Tasks pane. If I open the Calendar tab then tasks are displayed under their various dates. On one occasion the Tasks did list on the Tasks pane of Thunderbird's main mail tab(page) but next time I 'opened' Thunderbird they had disappeared!

    I have no answer for you, but you might post on this thread. Perhaps the two affected might get some value out of talking.https://support.mozilla.org/en-US/questions/1017718
    Some commonality of software or even the use of the two factor authentication on Google.

  • View Column info not displaying in Columns Tab

    Running XP SP2 and SQL Developer 1.5.1 5440
    When looking at views that are using tables from another schema. I don't see any of the columns information. I have DBA role
    In rel 1.1.2.25 2579 I see them just fine. (Both loaded on machine right now)
    Is this a bug or do I have a setting problem?

    Barry,
    As a "disclaimer", the points below are based on my usage of SQL Developer and things that bug me about how it works or doesn't work - I know that there are more important things to fix than a number of these.
    On to the basics ... and the most basic of the basics for a tool like SQL Developer:
    1) Problems with data dictionary queries in navigator or object tabs:
    - Triggers not listed in Table tab if trigger owned by different schema to table owner
    - Index columns not listed in Table tab if index owned by different schema to table owner
    - View columns not listed in View tab if view owned by different schema to current user
    - Dependencies not listed in Table/View tab if other object owned by different schema to object owner
    - Performance of Table Node (outer join added in 1.5.1)
    - there are a lot of other posts about the supplied data dictionary queries not producing the right results and I often find that I am querying the data dictionary directly in a SQL Worksheet for information that should be correct in the navigator/object tabs
    Basic things that I expect to work in a tool like SQL Developer (or to work given that they have been included):
    1) Popup Describe problems
    - schema name is case sensitive, so doesn't find owner.object
    - synonym overrides schema name (OWNER.OBJECT will describe local OBJECT synonym instead of OWNER's object)
    - position based object name selection includes punctuation
    2) Bind variables that work properly in PL/SQL (both Execute Statement and Run Script)
    3) Package decomposition in object navigator doesn't report variables or constants of custom types and lists object.column%type constants as "constant"
    4) Exporting query results re-executes query to display Export dialog - this presents as SQL Developer freezing after selecting the Export menu option for queries that take a long time for first record to appear
    I would use SQL Developer more (or more of SQL Developer) if:
    1) More integrated file based development - I still do the bulk of my object creation (largely PL/SQL and views) editing in Wordpad and running via SQL*Plus largely because I get better error reporting.
    - display the compile message tab when using the compile button for a file
    - show errors doesn't work for views
    2) Running Reports hang SQL Developer - I still have my SQL scripts for my common queries, which I can run through SQL Worksheet in a much friendlier fashion (I can cancel them and they don't hang SQL Dev) than I can run reports
    Problems that detract from the "polish" of SQL Developer, but don't really have a big impact on usage but discourage me from trying to "convert" non-techie TOAD using colleagues:
    1) Multiple TNSNAMES files read - generates multiple entries
    2) Export of long string literals causes ORA-972 error
    3) "Statement Processed" feedback is extremely sensitive to spaces ("create Statement Processed" where two spaces between the create and view keywords) and assumes simple statements ("create unique Statement Processed" or "create or replace force Statement Processed" as examples)
    I think that makes 10 basics to fix (although some as just issues that make the tool look unpolished), however, it does seem as though testing in the following areas could be significantly better:
    1) Regression testing - a number of bugs seem to crop up again after being fixed in earlier versions
    2) Navigator/object tab queries - especially with multi-schema applications (ie Oracle eBusiness Suite) and just generally objects owned by other schemas
    3) Performance with large DBs in terms of object count (ie Oracle eBusiness Suite)
    As a final note, it is my impression that SQL Developer development has been unbalanced in focusing too much on including new functionality (which is good) and not enough on getting existing functionality right (which is better).
    I hope this helps (and wasn't too long) ...
    theFurryOne

  • IN MIGO display mode not displaying the Invoice tab.

    Dear Sappers
    My Problem is , We r doing MIGO with excise & it capture well  posted it, But after that in display mode of MIGO the excise invoice tab not display?
    Why? How will get it?
    Please suggest better solution........
    Thanks

    I understand this note is useful if Excise tab not dispalyed while doing MIRO. But the issue is -In dispaly mode of MIGO the excise tab is not dispalyed even though we have captured the Excise during MIGO.
    Please let me know some solution on this as I am also facing same problem.
    Thanks
    Dhanu

  • Group Header not displaying on conditional suppression

    I have a report that is used to audit controlled medications.  It is grouped by patient and then by medication order ID.  I only want to display the data when the patient has had their medication ordered more than once.  I have a test patient who is not displaying on my report and I have figured out why, but no clue as how to fix it.  Does anyone have any ideas?  The reason why the test patient in question is not displaying is because they have three medication orders of different medications.  Only one of these was ordered more than once.  I believe my suppression formula is only catching the first medication order and since the line is never greater than one on that, his header won't display....  How can I evaluate all of his different medication orders?
    IF distinctcount({ORDER_MED.ORDER_MED_ID}, {PATIENT.PAT_MRN_ID}) >1 then
       if  count({ORDER_AUDIT_TRL.line}, {ORDER_MED.ORDER_MED_ID})>1 then
          false
      else
           true
    else if
    count({ORDER_AUDIT_TRL.line}, {ORDER_MED.ORDER_MED_ID})<=1 then
            true

    I think I just figured this out....
    I added this to the group selection criteria...
    count({ORDER_AUDIT_TRL.line}, {ORDER_MED.ORDER_MED_ID})>1

  • Cover Art Not Displaying in Artwork Tab

    I am having a problem with the cover art as follows:
    1. I have added cover to each song be it a downloaded song from an album or a ripped song from a CD. I did this by (a) downloading/getting the album cover art (b) copying the cover art from the ARTWORK PANE (c)selecting all songs from an album (d) selecting GET INFO for all songs in the album (e) pasting the cover art into the "common" ARTWORK FIELD and seeing said artwork therein (f) pressing OK.
    2. I then went to confirm that the artwork had been added to each song and discovered the following:
    a) highlight/select song --> right click --> select GET INFO --> select ARTWORK tab --> no artwork appears regardless of the amount the "size slider" is moved.
    b) highlight/select song --> right click --> select GET INFO --> select ARTWORK tab --> right click --> select copy --> open Word for Windows --> right click --> select past --> cover art is displayed.
    In other words, the cover art is NOT being displayed within iTunes but appears to nonetheless be present because (a) it DOES appear in Word using copy/paste and (b) it does appear in the Artwork Pane when playing songs.
    So, the issue that I need hels with is whether anyone has an idea as to how to solve this issue.
    Message was edited by: joel_sonos user

    joel_sonos user wrote:
    Thanks to all who took the time to read this post and consider the problem...will keep everyone nformed should it occur again...
    Are you accusing me of multiple personalities?
    Glad it seems to have sorted itself out.
    Cheers,
    Patrick

  • FSA Coverage Amount Not Displayed

    We recently moved to EhP6 (portal version 7.02), and I am testing Open Enrollment in the new ESS.  We have activated business function HCM_ESS_WDA_2.  I noticed that neither the "Benefits Summary" nor the "Review and Save" screen displays the FSA Coverage Amount.  For example, if the employee chooses $1300 for Health FSA plan, you can see the weekly pre-tax cost of $25, but you cannot see the $1300 unless you click on the plan name and view it in the pop-up box.  Seems that the coverage amount should be displayed out-of-the-box  Can anyone help?

    The ‘Coverage’ column is relevant for Health and insurance plans and not relevant for contribution type Plans like spending account Plans.
    Hence it will not make sense to display the Spending account contribution amount under ‘Coverage’ column.
    This is the reason why SAP display the cost per period under the ‘Pre-Tax costs’ column and the Annual contribution in the Plan details pop up screen.
    This information is not unavailable in the UI, but if you still want to see the annual contribution amount in the main screen, then you will need to modify the component configuration you are using for Review and Save.
    For example, if you are using the standard configuration itself, then you will need to modify the configuration ‘HRESS_CC_BEN_REV_N_SAVE’
    Apart from the columns that are already added for display, you could add the column ‘BEN_FSA_AMT’ in this configuration and then it will get displayed in the ‘Election Summary’ step and the ‘Review and Save’ step.
    Bottom line here is, SAP cannot provide this in the standard but you could get this by adding the field in the component configuration.

Maybe you are looking for