Tax code condition type

Hi,
Am trying to create a new tax code a for a new condition type that i have created. However, the system defaults the condition types in FTXP (greys out other condition types). How do I get my condition type to default when I am creating tax codes in FTXP? I am trying to do this in TAXUSJ procedure.
Thanks
Bharathi

I always do the following:
1. Create an internal processing key in 'Check and Change Settings for Tax Processing'
2. Check Calculation Procedures - Define condition type
3. Define Procedure, also change the condition step
I am sorry, it always worked, if you did all that and it didn't work I don't know.
Regards

Similar Messages

  • Tax code  - Condition Type  - TAXINN

    Hi ,
    I have created various combinations of Tax code thru FTXP for TAXINN Procedure
    i like to know under which CONDITION TYPES  we have maintained the percentage of Taxes ?
    Please help me on this issue
    Thanks & Regards,
    Pioneer.

    hi
    >U WANNA KNOW WHICH CONDITION TYPES PERCENTAGES U HAVE MAINTAINED
    check following tables u will get list
    for excise check table J_1IEXCHDR for header
    J_1IEXCDTL for item excise
    The Table name used to find the Tax Values are
    KOMV: Pricing Communications-Condition Record
    KONV: Conditions (Transaction Data)
    From the above tables you can refer the fields below.
    KAWRT
    KBETR
    Fetch the corresponding records based on the field
    KNTYP
    >WHICH CONDITIONS TO BE MAINTAINED
       Excise Conditions
    §         JMOD   IN: A/R BED
    §         JNED    IN: A/R NCCD
    §         JAED    IN: A/R AED
    §         JSED    IN: A/R SED
    §         JCES    IN: A/R Cess
    §         JECS    A/R Educational CESS
    ○     LST/CST/VAT Conditions
    §         JIN1      IN: A/R CST
    §         JIN2      IN: AR LST
    §         JIN4      IN: A/R CST Surcharge
    §         JIN5      IN: AR LST Surcharge
    §         JIN6      A/R VAT Payable
    §         JIN7      A/R CST Payable VAT
    ○     Service Tax Conditions
    §         JSE4    Service Tax
    §         JES4    ECS on Service Tax
    regards
    kunal

  • Tax code -Condition types in TAXINN

    I am using TAXINN procedure. My tax is ED8%ECess2%HCess 1% (Deductible). I have maintained in FV11 8% for JMOP, 2% for JECP and 1% for JSEP. For the setoff total condition do we need to maintain any percentage?
    1. Do I have to maintain 100% in the following conditions in FV11?  What is the reason for it?
    JMX1- IN: A/P BED setoff Total
    JMX2- IN: A/P BED inventory Total
    JEX1- IN:A/P ECS Setoff Total
    JEX2- IN:AP ECS INV Total
    JHX1- A/P SECess SOTotal
    JHX2-A/P SECess InvTotal
    2. What is the purpose of setoff total conditions?

    Let me tell you the steps I have done
    1.I have maintained Excise TAx rate for Chapter ID as 8% in the column Exc. Rate and Excise indicator as 1
    2. I have maintained tax code in FTXP
    3. I have maintained 8% for JMOP in FV11 by key combination Tax Classification by giving tax code V1 in column first and last.
    4. I maintained 100% for JMX1 in FV11 by key combination Tax Classification by giving tax code V1 in first column and the last column.
    I created then PO with basic price as 100, the tax calculated by JMOP is Rs 8.Also JMX1 has calculated the tax as Rs 0.64. JMOP conditiion value is in blue color and JMX1 value is in grey color.
    Total amount at the end of tax schema is shown as 108.64 where as if you see on the top of the screen the system is showing NET as 100  and below row of TAX as 8.
    Now when I again opened the FV11 to check JMXI , i found 8% there.
    Can you help please.
    where I am wrong.
    Since I have just started the testing so I have not maintained the condition records for ECS and HCES.

  • Where to configure Tax categories for tax related Condition types

    Hi all,
    Could you pls let me know Where to configure Tax categories for tax relevant Condition types. (any tcode for this)
    When we are creating condition records for tax relevant condition types then you have to assign tax classification for customer and tax classification for material....i am providing 1 and 1 for customer and material as well.....then assigning tax code....when trying to save this doc.... system throwing this error....Tax indicator 1 is not defined for use with condition type O012. This means for 1 we can't find tax categories maintained.
    Please look into this and your help would be appreciable.....
    Thanks in advance....regards.....Diwakaran......

    Hi,
    1. First you need to create condition type eg : ZCST in V/06 by copying standard condition type for taxes MWST for output taxes.
    2. you need to assign this condition type to country eg:IN in OVK1 T-Code.
    3. Next you need to define Tax classification for customer eg : 1 in OVK3 T-Code and assign it to tax category (condition type : ZCST)
    4. Next you need to define Tax classification for material eg : 1 in OVK4 T-Code and assign it to tax category (condition type : ZCST)
    5. Maintain this tax classification in XD01 & MM01 T-Codes.
    Regards,
    Dippy

  • MAINTAIN TAX CODES/CONDITION

    HI GURUS
    CAN ANY ONE TELL ME THAT WE CAN MAINTAIN TAX CODES / CONDITION IN PO IN SAP MM

    Hi,
      Can you elaborate more.
    Tax is calculated based on the tax conditions defined in the tax code.
    You can fetch the final tax amount in PO pricing procedure by defining a condition with condition type Taxes.
    Rajesh

  • Getting Reason Code, Condition Type, and Condition Value in one report

    Hello there,
    I have got a Question for you all BW Gurus. I need the answer for this as soon as possible. I will assign points to all helpful answers.
    I am having a Sales cube, Delivery Cube, and a Conditions Cube which I built. Each cube is populated from different ODS. Means there are 3 ODS for 3 cubes. I am joining these 3 cubes under a Multiprovider.
    My Question is:
    We are using Reason Codes at Delivery level. We have identified an empty field in the delivery tables and populating this field with the reason codes. We have condition type and condition value only in the Condition cube. One of the reporting requirements is that we need to see Reason code, Condition Type, and Condition value in one report. I am planning to report on the Multiprovider. Since Reason code, Condition Type, and Condition value are not present in all the 3 cubes (means they are not common characteristics in the Multiprovider), I don’t think I can get those values in one report if I report on the Multiprovider. Please correct me if I am wrong. If what I say is correct, please tell me how to solve my problem. Once again, helpful answers will be greatly appreciated and rewarded with points.
    Thank you in advance.
    Kind Regards,
    Swathi

    Hello Swathi,
    Please do not post the same question on multiple forums.
    Thanks,

  • Calculation of taxes on condition types

    hi team,
    I am using different condition types in my calculation schema. whenever lumpsum amounts are fed in the system, like Discount/Quantity, Absolute discount, Header Disc.(Value), Header Surch.(Value), Pack & Forward-Value, Pack & Forward- Qty, Freight/Quantity, Freight (Value), LC/Bank Charges(Val), Entry Tax/Octroi(V) Road Tax (Value), Registration Fees(V), Miscellaneous(Value) & Miscellaneos/Quntity, are independent of each other on which tax etc should not be calculated.
    My client is inserting these values including tax. so, he dont want cascading effect on these values.
    he wants only those values with % should have cascading effect.
    how to confiure the same in calculation schema.
    my schema currently is having cascading effect.
    thanks
    satish

    any updates.

  • Tax code conditions not appearing

    Hi Friends
    we are using TAXINN tax procedure, I am maintaining conditions in FV11 using tax code V1.
    When i select this tax code at the time of raising PO system in the invoice tab and presses taxes tab system is not popping up separate window where excise calculations are shown.
    Could any one of you help me out from this issue
    Regards
    Vivek

    HI,
    Did u maintain the assignment taxcode to your company code?
    Check it out & if its not maintained,  you can do the same in IMG -Logistics General - Tax on Goods Movements - India - Basic Settings - Assign tax codes to Company code  
    Hope this will solve your problem
    Regards,

  • TABLE- TAX CODE CONDITION RECORDS

    Hi
    Please let me know the table where i can download all the tax codes with the %(AMOUNT) of condition records details
    Krishna

    u can make a query in sqvi where u can join the table u have used in access sequence ( for eg A004 ) and KONP . this is simple way as data is stored in 2 different table.

  • MM-How to treat purchasing sales tax as condition type?

    The reason to create it as condition type, so that the sales tax accrual accounts to be hit during goods receipt and IV.
    Currently we did the testing, condition type with condition category 'B'. But the account posting is wrong for return PO.
    Can somebody please help on this?
    Thanks.

    HI,
    Where u have set the cond type in MM side or FI side?
    If FI side create the acct key & accurals keys.OBCN.Then assign this in OBQ3 against the cond type
    Then in OB40 against the acct key assign the G/L acct.
    If MMside then in spro>pur>condition>def price det process>def transaction event key
    here create the transaction key & assign in M/08

  • Taxes on condition types

    Hi,
    We have about 15 condition types in our pricing procedure. Our requirement is:
    The material itself is not taxable, but 5 of the condition types are taxable. We are using Vertex as the tax engine. As of now we are not able to separate out these 5 condition types as taxable. Any help or guidance on this is appreciated.
    Thanks
    Hari

    any updates.

  • Tax procedure condition type

    Dear Forum,
    In tax procedure, the first step is normally base amount and subsequent steps are input and output tax.
    May I know what is the reason to have additional condition type besides input and output tax in tax procedure?
    Thanks
    Rgds

    Dear Srini,
    As you referred some countries having only three condition types, like Base amount , Input and Output -  because their country Tax structure will be very simple.
    When you get something. VAT 15% when you sell some VAT 20% this is simple tax procedure.
    Whereas you take example of Indian Scenario. When you want to buy a Excisable Material the tax structure will be like this,
    Base amount  100
    Excise Duty      14
    E.Cess                7
    H.E.Cess             7
    So it is the legal requirement each amount of tax has to be spitted as per the Statutory act.
    For the above reason only some countries have very easy Tax procedure, some will have complicated tax procedures.
    Hope it clarifies.
    Thanks and regards
    Praveen.J

  • Tax Code Condition

    Dear Experts,
    I make the new condition type ZTOT in Taxinn for store the value of final price but only % is store no value store could andy body explain me where ( Table ) this value store ( condition value ) or how Can I store.
    Rajesh Chauhan

    closed

  • Create New Tax code and condition types

    hi experts,
    i want to create new tax code V10 and new condition types ZWKT and ZSTX under V10.
    i have a requirement that is create service general Purchase Order with following tax conditions
    1. Work Tax 4% on 70% of Bill Amount.
    2. Service Tax 12.36% on 33% of Bill Amount.
    while creating PO when user select ZWKT and ZSTX, system should calculate 4%( on 70%) and 12.36% (on 33%) and place the tax amount on relevant fields automatically.
    ( i tryed with tcode:FTXP and created tax code(country key: IN, procedure: TAXINN and taxtype: V input tax) but problem with assigning condition types and calculation procedure)
    please help me in this issue (step by step).
    Thanks.
    srinu.

    Hi,
    Here you have to create two dummy condition type for Base Value. One for Service Tax and other one for Work Tax.
    Then create two condition type for Work Tax & Service Tax.
    Ex : Work Order Base Value condition type is "A"
    Service Tax Base Value condition Type is "B"
    Work Order Tax condition Type is "C"
    Service Tax condition type is "D"
    In Pricing procedure just add all the above condition type as below
    Both Base Value condition type will be calculated from System Base Value  & in FV11 maintain the Base Value percentage against the Tax Code & Condition Type as per ur req (70% for Work Tax & 33% for Ser Tax)
    Work Order Tax & Ser Tax will be calculated from respective Base Value. In FV11 just maintain the tax %.
    Sangram

  • Condition types in Taxes, MM and SD

    Hi Experts,
    There are different kinds of condition types For Taxes( t.code obq1), MM (m/06) and SD( v/06). how are these condition types are useful. please explain the difference among these condition types.
    Regards,
    babu

    Hi Babu,
             Vendor purchasing price is made up of with differenct pricing elements. Ex . Material basic prices , freight charges , discount etc. To reprsent each element different condition types are used in MM pricing procedure.
             In the similar manner for Finishe goods selling prices is made up of diffeent price elements. Ex. Finished goods basic price , frieght charges, discoutn etc , To reprsent each element different condition types are used in SD pricing procedure.
              The total tax amont also is made up of with diffrent tax elements or different taxes are there. Ex input tax , out put tax , basic tax , surcharge , education cess etc. To represent these taxes various condition types are used in Tax procedure..
    Hope its clear........
    Regds
    Chandra

Maybe you are looking for