Tax_recovery_rate column mapping in R12 tax tables
Hi ,
Can anyone pleasehelp me out. I am trying to remediate a view which originally in 11i was consisting of the following columns:
org_id,
tax_id,
name,
tax_rate,
tax_recovery_rate,
offset_tax_code_id,
start_date,
inactive_date end_date,
enabled_flag enabled
(table used: ap_tax_codes_all)
I was able to map the coluumns using the zx_rates_b and zx_accounts as
internal_organization_id org_id,
source_id tax_id,
zrb.tax_rate_code name,
percentage_rate tax_rate,
zrb.tax_rate_id offset_tax_code_id,
effective_from start_date,
effective_to end_date,
active_flag enabled
except for the tax_recovery_rate column.
Can anyone please explain how this column is mapped in r12 tables?
Thanks in advance
-Chetan Verma
Hi Chetan ;
Please check e-trm site for table integrity and relations
Regard
Helios
Similar Messages
-
How mapping sharepoint list Columns to Sql server data table columns programaticlly
Hi ,
I have one Verification List in share Point ,in that list i have 10 columns.And we have sql server in that sql server we have one data table Verification_Table
in that table we have 25 column, my requirement is all list data move to sql data table[ what ever columns mapping to list--->data table that data store in data table reaming column is Null]
using grammatically not in BCSHello,
You can create SQL connection and use Datareader to read from SQL.Firs create a connection string and put this string in web application web.config file of your sharepoint site.
Now use below code to call your connectionstring in your webpart.
SqlConnection con = new SqlConnection(System.Configuration.ConfigurationManager.AppSettings["ConnectionString"]);
Here is link to read the data from SQL:
http://www.akadia.com/services/dotnet_data_reader.html
Here is one MSDN link to read SP list data:
http://msdn.microsoft.com/en-us/library/dd490727%28v=office.12%29.aspx
Let me know if you have any doubt
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
Link between ZX tax tables and gl_code_combinations table in R12
Hi All,
I am new to Oracle apps. We are upgrading from EBS 11i to R12.1.3. In it, ar_vat_tax is obolete. I know its replacement is ZX_rates_b table. But in 11i, they are connected using
ar_vat_tax.tax_account_id = gl_code_combinations.code_combination_id
Now I am not able to find the join between zx tax tables and gl_code_combinations. Can anyone please help how to link these ZX tax table to gl_code_combinations???
Regards,
Swapnil K.Resolved the issue.
There is a table called ZX_ACCOUNTS. Use the column tax_account_ccid in it. Link ZX_ACCOUNTS.tax_account_entity_id to ZX_RATES_B.tax_rate_id.
Regards,
Swapnil K. -
Hi, I am really new to OBIEE 10g.
I already set up a SQL Server 2005 database in Physical and import a view vw_Dim_retail_branch.
The view has 3 columns: branch_id, branch_code, branch_desc.
Now I want to set up the Business model to map this physical table (view).
I created a new Business model
Added new logical table Dim_retail_branch
In the sources, added the vw_Dim_retail_branch as source table.
But in the Logical table source window, column mapping tab, it's blank. I thought it should be able to identify all the columns from vw_Dim_retail_branch, but not. The show mapped columns is ticked.
What should I do here? Manually type each column?HI,
Just you can drag and drop the columns from physical layer to BMM layer.
Select the 3 columns and drag and drop it to the created logical column in BMM layer.
for more reference : http:\\mkashu.blogspot.com
Regards,
VG -
Mapping column names stored in a table to one data table dynamically
Hi everyone,
Can someone help me - I am trying to import different file types (CSV, TXT, XLS) into a common table.
The column mapping for the input files is mapped in a look up table - so file 1.txt can have columns order as 12345 while file 2.csv can have columns order 54321.
How would I dynamically set up the correct mapping depending on which file I am busy with in my foreach loop. (an example would be much appreciated - I am relatively new to SSIS and have a deadline coming up)
Thanks,Pretty sure not possible with available transformations...
You can try script tasks/component and standardize the input file one by one by using a bunch of loops/if-else codes and collect your data into one table.
Otherwise, you would need to create different connections/DF for each types of files. -
Migrating CMP EJB mapped to SQL Server table with identity column from WL
Hi,
I want to migrate an application from Weblogic to SAP Netweaver 2004s (7.0). We had successfully migrated this application to an earlier version of Netweaver. I have a number of CMP EJBs which are mapped to SQL Server tables with the PK as identity columns(autogenerated by SQL Server). I am having difficulty mapping the same in persistant.xml. This scenario works perfectly well in Weblogic and worked by using ejb-pk in an earlier version of Netweaver.
Please let me know how to proceed.
-SekharI suspect it is the security as specified in the message. E.g .your DBA set the ID columns so no user can override values in it.
And I suggest you 1st put the data into a staging table, then push it to the destination, this does not resolve the issue, but ensures better processing.
Arthur
MyBlog
Twitter -
When I upload a cvs file not all the column display in the Data / Table Mapping screen
1. I have created application using Apex Data Loading wizard. There when I am trying to load data from .csv file, but not all the columns display in the "Data / Table Mapping" screen. But if I go through AQL --> Utility --> Data Workshop, there all column display in "Data / Table Mapping" page. I want to get same thing in application I created. How will get all columns display in the screen?
2. Is there any way to select target table dynamically during runtime. So that in appication we can select different target tables with different source file to load data.Your user info says iPad. This is the OS X Numbers forum. Assuming you are using OS X… Be sure the file is named with a .csv suffix.
(I don't have an iPad, so I don't know the iOS answer.) -
I am searching for HANA Live Content views column mapping to SAP tables document. Please let me know where can I find it.
Hi Srinivas,
I guess this is the same question as the one about the SD content, so my answer is the same:
if you have access to the HANA Live RDS documentation which comes as part of the so called Step-by-Step Guide you can find a document RDS_SHL_HANA10V5_Technical_Content_Mapping_EN_XX.xls in the folder structure. To get to this file you need to drill down this path:..RDS SBS Guides\HANA Live\V5\Serv_Enabled\RDS
In that file you find all the tables used in all the RDS content.
Regards
Miklos
Solution and Knowledge Packaging
SAP Labs -
Hi can anyone tell me the name of the tax table which generates the tax CCID for accounting segments....
Resolved the issue.
There is a table called ZX_ACCOUNTS. Use the column tax_account_ccid in it. Link ZX_ACCOUNTS.tax_account_entity_id to ZX_RATES_B.tax_rate_id.
Regards,
Swapnil K. -
Warning in WD ABAP Table - Master Column Mapping deprecated
Hi ,
I am getting a warning 'Master Column Mapping deprecated' in a WD ABAP component while activating it .
Can anybody suggest what I have to do to solve this issue .
Best Regards
SidHi,
Could you please tell me how to take Row Arrangement in Master Column?
Cheers
Harkesh Dang -
Experts,
Since the printed Purchase order default report does not include tax in it, i want to make a customized report which i have done so
The Ebusiness suite taxations etup has been done BUT i cant find the tables which hold the tax information due to which my customized report is pending
Could you please tell me the tax tables
ThanksOne way of getting the table/column name is from the application. Navigate to the form where the tax field is located; open the form, and query the record, and use of the following:
- Enable trace
- Help > Record History
- Help > Diagnostics > Examine
- Use SYSTEM.LAST_QUERY
Note: 259722.1 - HOWTO Determine Table and Column Name from a field in a form in 11i
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=259722.1 -
How map to my particular table to the fact table in obiee 11g...
Hi friends,
I did this simple report in obiee 11g(i.e)
"NATIONALITY COUNT IN DEPARTMENT WISE"
For that i used the following tables:
per_all_assignments_f----->fact table
hr_all_organization_units----->dim table(containing departments)
per_all_people_f---------------->dim table(containing nationality)
I made all the mappings in the physical diagram, as also viewed my report in BI answers
It shows the following results like
NATIONALITY---------------------------------------------------------------------COUNT(NATIONALITY)
AUS------------------------------------------------------------------------------------------------24
AFR------------------------------------------------------------------------------------------------25
PHQ_VB-------------------------------------------------------------------------------------------40
SH_VT----------------------------------------------------------------------------------------------4
The problem is for me it is showing the above results, but the nationality column is of various codes of the country.
Since i doesnt want the code of the nationalitian to display in the results..i need the meaning of each and every nationality..
like,
AUS------------------------Australian
AFR-------------------------African
PHQ_VB----------------------Germanian(assigned)
Since i know that the meaning for the nationalitian is available in "FND_LOOKUP_VALUES"...okay..
I can import "FND_LOOKUP_VALUES" table to the physical layer...but how i can able to give the mapping to the fact table in my physical diagram...
In my report the fact table is "per_all_assignments_f"
As my fact table doesnt contains any matching column corresponding to the dimension table "FND_LOOKUP_VALUES".....
Then how i can give mappings to the fact column???? for viewing the full meaning of the nationalitian in my report.....Help me friends...
Regards,
Harry...Hi bifact,
I followed the step that U asked me to go but im stuck with later.....
*) I saved the query that i executed in toad with the columns showing country codes and country meaning to the excel sheet...
This is the query that i executed in toad and copied data s in excel sheet..
select z.lookup_code, z.meaning
from per_all_people_f e, per_all_assignments_f f, hr_all_organization_units h, fnd_lookup_values z where
e.person_id = f.person_id and f.organization_id = h.organization_id and e.business_group_id = f.business_group_id
and f.business_group_id = h.business_group_id and f.location_id = h.location_id
AND z.lookup_type(+) = 'NATIONALITY'AND z.lookup_code(+) = e.nationality and sysdate between
e.effective_start_date and e.effective_end_date and e.nationality is not null
*) After that i created a system DSN for the excel drive..
*) After that when i tried to import metadata of the excel data that is saved, it showed me connection failed...
For importing this excel data
what connection details i need to give:--------------------
as well as user name and also password...
Soon after importing this excel you said that to give key connection only to fnd_lookup_tables(dim) and that excel data..
if so, again im not giving key connection to my fact table..
I think again the same error will occur that no logical mapping is not made to fact so again repository is inconsistent...
Hi bifact sorry to ask you, but can you see the steps that i followed is correct and after that wat more steps i need to proceed..Can you tell me in breif manner...Thanks for your help...
Regards,
Harry... -
Column-map in weblogic-cmp-rdbms-jar.xml
Hi,
How to specify column-map for the following database tables:
Table1: id,col2,col3. Primary key - id.
Table2: m_id,description,col4,col5. Primay key - (m_id,col4).
The relationship I specified is table1-has-many-table2. This is a 1 to m relation
and
Table1.id = Table2.m_id.
I specified the following column-map
<column-map>
<foreign-key-column>m_id</foreign-key-column>
<key-column>id</key-column>
</column-map>
But the server is throwing an exception that all the columns in table2 should
me mapped.
But in this case, I can join the tables with just id only. What should I specify
for col4 map?.
I can just reverse the mapping, but I am trying to test the boundaries of weblogic
server.
Is this case handled in weblogic server implementation?.
I am testing relationship-role-map for ejb2.0 on weblogic server8.1 beta version.
Thanks,
SathishHello Sathish,
Glad to help! Have a wonderful week.
Best regards,
Ryan LeCompte
[email protected]
http://www.louisiana.edu/~rml7669
"Sathish Kandacharam" <[email protected]> wrote:
>
Hi Ryan,
Thanks alot. That example helped alot.
Thanks,
Sathish
"Ryan LeCompte" <[email protected]> wrote:
Hello Sathish,
Please refer to the sample code that comes packaged with BEA WebLogic
Server for
examples of how the weblogic-cmp-rdbms-jar.xml file should look forall
of the
various relationships. In particular, look at the Bands example.
Best regards,
Ryan LeCompte
[email protected]
http://www.louisiana.edu/~rml7669
"Sathish Kandacharam" <[email protected]> wrote:
Hi,
How to specify column-map for the following database tables:
Table1: id,col2,col3. Primary key - id.
Table2: m_id,description,col4,col5. Primay key - (m_id,col4).
The relationship I specified is table1-has-many-table2. This is
a
1 to m relation
and
Table1.id = Table2.m_id.
I specified the following column-map
<column-map>
<foreign-key-column>m_id</foreign-key-column>
<key-column>id</key-column>
</column-map>
But the server is throwing an exception that all the columns intable2
should
me mapped.
But in this case, I can join the tables with just id only. Whatshould
I specify
for col4 map?.
I can just reverse the mapping, but I am trying to test the boundaries
of weblogic
server.
Is this case handled in weblogic server implementation?.
I am testing relationship-role-map for ejb2.0 on weblogic server8.1
beta version.
Thanks,
Sathish -
Hi everyone,
I have been tasked to upgrade an existing DTS package into an SSIS package.
The old package uses 3 tables.
Table 1) Has a list of file names
Table 2) Has a list of columns per file
Table 3) Is the data destination.
So what is supposed to happen is:
Step 1) the package should load the files into a resultset
Step 2) for each file in the resultset, the package should get the related columns
Step 3) the package should now map the columns to the destination table (variable column numbers here)
Step 4) the import should take place.
I have gotten to step 2 but am not sure how to dynamically map the columns to the destination table.
Any pointers anyone?
Thanks in advance!Hi Tonyhektic,
What’s the nature of Table 2, does it only store the column names for each file? I don’t know how it is implemented in DTS package, however, in SSIS package, dynamic columns mapping is not supported. To work around this issue, we need to use Script component
to do the columns mapping. You can refer to Sorna’s script above or have a look at the following blogs:
http://munishbansal.wordpress.com/2009/06/09/dynamic-columns-mapping-%E2%80%93-script-component-as-destination-ssis/
http://blog.quasarinc.com/ssis/best-solution-to-load-dynamically-change-csv-file-in-ssis-etl-package/
Regards,
Mike Yin
TechNet Community Support -
Getting Column names (header) of a table dynamically
Dear Experts,
Greetings.
I have a requirement in which I need to get the column name (header) of a table when the user clicks on a column.
Kindly suggest me the possible ways.
Thanks in advance.
Regards
SathyaHi,
use one of the following based on your requirement
Bind the header text to a context attribute and access this attribute from code when clicked on the column.
Or use parameter mapping.
Regards
Ayyapparaj
Maybe you are looking for
-
RMAN Recovery Window 7 days setting - shows no obsolete backups
Hi All. Quick question about RMAN retention policy.... I have the current backup strategy: Full backup (0) -> Sunday Incremental backup (1) -> Monday - Saturday Archive log backups -> every hour This is a new database I just started taking backups on
-
Can I get 2 sets of headphones to work at the same time on my powerbook?
For example, one USB set and one regular mini jack? I have played around in audio settings but don't see a way to do it. thanks
-
Smartform output in the background
Hello all, Now I met a problem about smartform output in the background: The default printer is LP01. When I execute the program which calls this smartform in background, I change the printer to LP03. Then I use the t-code:SP02 and find the printer i
-
I'm following my school's link to download the Master Suite Collection CS6 and once I download the Download Assistant, the red adobe box pops up and another box pops up and tells me that there is an error with the installer file, that it is damaged a
-
My relatively new 5th gen (had since october '10) has died. When I try to sync, I get a -124 error, saying it's unable to sync, a message saying 'would to like to scan and fix' EVERY TIME I plug the iPod in. It's also been saying that it's corrupted