Tcode: FAKP - Payment advice fast entry

Hi Abapers,
I have a requirement  to customise the standard tcode: FAKP. requirement includes:
1. I need to add 3 fields from table: AVIP to possible fields section of FAKP tcode. Fields to be added are: Payment ref. no(AVIP-KIDNO), Deduction Amount (AVIP-ABBTR), Sap Reason Code (AVIP-RSTGN).
Solution is given as to refer OSS Note: 2596. I found that this note cant be implimented. however in note, its been suggested to add fields to standard screen through Dict/Prog option and to add logic in flow logic as 'FIELD BSEG-KIDNO etc..). my question is whether can i get any exits to impliment this functionality or do i need to follow this manual method?
2. Payment reference(RF05A-AVSID)  in the payment advice (AVIP-AVSID) needs to be copied to ref.key 3(BSEG-XREF3) field in the FI line item.
please suggest some exit with which i can impliment this.
Thanks in advance!!
Points are sure for useful answers..

Please check if u can use the FBE1,FBE2,FBE3 & FBE6
T-codes../

Similar Messages

  • "FB10" Invoice/Credit Fast Entry Enter Items

    Dear Guru's
    When I select Tcode  "FB10" Invoice/Credit Fast Entry Enter Items, is there anyway to include Special GL Indicators in the selection.
    Regards
    Shakeer

    Hi,
    This Program & T.code design for Credit Memo / Invoice not for Advances.
    As per standared Posting Key 31 pre defined in FB10, special gl required where PK 09 / 19 Etc.
    we are not able to post special GL transactions by using T.code: FB10.
    Regards
    Viswa

  • Issue in F-26(Incoming Payments Fast Entry) Transaction

    Hi all,
    I am using f-26(Incoming Payments Fast Entry) tcode. In this for each customer with the company code and the payment term, depending on the document date, the cash discount is been calculated on the Gross amount for the line items of that customer.
    In the tcode it will calculate, But I need to do the uploading using this tcode, and need to calculate those cash discount amounts in my code.Because of lot of payment terms, it is combossum to do it in the code.
    Can anybody tell me how to handle this, is there any FM for this.?
    Plz check the tables: BSID, T052.
    payment term fieldname: BSID-ZTERM.
    cash discount fields: T052-ZPRZ1, T052-ZPRZ2.
    Plz check its very urgent, My ticket is escalting in 2 days. Plz reply me if any body has done this before.
    Kumar

    sorry kumar,
    but there seems to be no fm for your purpose
    discount is a very complex topic because of:
    tax, foreign currency, day of payment,
    booking net or gross, etc.
    -> look include MF05AFA0_AUSGLEICH_MIT_BUCHEN
    -> i guess, you've to program it by yourself
    regards Andreas

  • Tcode PA70(Fast Entry) using SAP GUI for HTML

    Hi Gurus,
    when i am copying data(one row) from excel sheet into infotype using
    tcode PA70(Fast Entry),through EP(transaction iview Created Using SAP
    GUI for HTML).
    enter TCODE PA70-> select Recurring Payments/Deductions -> click
    create -> copy the data from excel sheet and past
    The whole row of data is copied into one field . the data is not copied
    into the corresponding fields.
    please find the screenshot.
    <a href="http://img337.imageshack.us/i/guiforhtml.jpg/">[IMG]http://img337.imageshack.us/img337/1723/guiforhtml.jpg[/IMG]</a>
    Uploaded with <a href="http://imageshack.us">ImageShack.us</a>
    Regards
    K Naveen Kishore.

    Hello Naveen,
    I don't think this is possible.  Please see note 314568 about the limitations of the SAPgui for HTML (webgui), the "Clipboard access" section seems to describe this limitation.
    Edgar

  • Payment advice for multiple vendor using tcode F110

    Hi all
    I am facing problem while printing payment advice program for Multiple vendors using transaction F110. If I passed single or multiple vendor , I am getting only single vendor payment advice details ( if I passed more than one vendor also) .I  need solution for multiple vendors .
    Tcode : F110
    Program : RFFOD__U .
    How to print multiple vendor for payment advice details.
    pls provide the solution for this..
    waiting for Reply.

    I have used different program RFFOD__S. It was working fine.

  • A/R payment advice process

    I want to know the payment advice process for Accounts receivable in SAP.  I have seen the T.Codes FBE1, FBE2, FBE3 etc. related t.codes.  Is it possible to post the receipt entry based on payment advice.

    Hi,
    Please follow the steps below to find Payment advice Number in FB05 :
    Tcode : FB05
    1st screen : Enter header data (document date, type, C. Code,...)
    1st screen : Check 'Incoming payment'
    1st screen : Enter the Posting key and Account for the first line item, then click Enter
    2nd screen : Enter data for the first item (Amount, Text,...) then click on 'Choose open items' bouton
    3rd screen : in 'Open selection item' there is four selection fields : 'Account', 'Account Type', 'Special G/L ind' and 'Payment advice Number' so there enter your 'Payment advice Number' then click on 'Process open items' bouton to clear it.
    Regards.

  • How to assign smartform to print program for payment advice

    Hi!
    There is already a print program and a smartform for payment advice. This was working before as I was told. But when I checked table TNAPR, there is no entry in the table with the program name and neither for the smartform. How can I use them together again? This is used in tcode F110 so I could not use NACE.
    Any advise? Thanks!
    Cholen

    Hi Cholen,
    Configuration to assign Program and Form names for F110 is done in FBZP Transaction.
    Please Check under Paying company codes tab and Pmnt Methods in company Code tab where Smart form and other text modules are assigned.
    Under Pmnt methods in a country Print program is assigned.
    Thanks
    Sri

  • Customer Payment advice FLB1

    Hi,
    While editing the unapplied payment advice in FLB1, there is an option for Fast entry, when we double click on any item which needs to be edited, it goes to Change payment advice :line item data, there is an option for fast entry again, in this screen there are many fields avaialble, is thare a way to save a line layout or screen template for this ??
    Thanks in advance
    Uma

    Hello,
    Customer of vendor payment advice is the advice informing the customer that the amount has been paid against which invoices.
    You need to configure the payment advice in FBZP or give them as part of variant in F110.
    When you run the automatic payment program, based on the FBZP settings, a payment advice gets triggered.
    You are able to see your payment advice in SP02. To generate payment advice correctly, please make sure your settings in Variant (F110) are correct. Any invalid entries will result in NO generation of payment advice.
    Hope this is useful to you.
    Regards,
    Ravi

  • Issue while clearing open items with a payment advice

    I have created a payment advice to clear open items on a customer. As part of testing, I have created 2 items in the payment advice. Both are short payments for the open items.
    In the first line item, I am short paying an open item by entering the reference number. (XBLNR) in AVIP-XBLNR.
    In the second line item, I am short paying an open item by entering the assignment number. ZUONR in AVIP-ZUONR.
    I am using F-28 for my clearing. I have noticed a very strange issue where in the program will place the residual amount in the residual amount column against the appropriate line item for the first item. Where as for the second item, it does recognize the open item and brings it in the clearing screen but does not put the residual amount in the residual amount column. Due to this, the new line item in the clearing document does not have a link to its original line item.
    This has started happening all of a sudden. I am unsure what might have caused this. Please let me know if you need additional information.
    Thanks

    Include - MF05BFO0
    FORM op_pruefen
    Context:
              WHEN 'K'.
               ENHANCEMENT-POINT mf05bfo0_02 SPOTS es_sapmf05b.
    Create an enhancement here and add this code
                   IF SY-TCODE = 'FB1K'.
                         T041A-AUGLV = 'AUSGZAHL'.
                   ENDIF.

  • In vendor payment advice to show the document type

    Hi
    Our customised vendor payment advice is designed in smartforms, we need to include document types for e.g. if Down paymentu2013KA, Invoice-RE to easy understand. From where can I call this document types? Because in our payment advice for FI we only have the table BSAK cleared items. Here BKPF always KZ and I didnu2019t get the origin document type. In automatic payment program after payment run, in payment list here we can see the document type KA or RE. Like same we need to show in our payment advice.
    Please suggest.

    I suppose based on the same ZUONR and AUGBL, you could find the related BSEG entries and from there, BKPF with the document type... but this needs to be verified whether it's the correct logic.
    Even then, searching BSEG with those fields will be a performance problem unless you can do it via some secondary index.

  • Payment advice mailing to vendor

    Hi SDN users,
    Can any one give the producer  that how can the  payment advice will mail to vendor.
    please provide step by step configuraction and producer.

    Hello,
    Please, read the SAP Note 1033893 . This notes shows how to send payment advice by e-mail. The solution uses BTE's.
    Just a hint: Next time you can search the forum. Some questions are already answered and it's easier and faster for you to get a good response.
    REgards,
    Renan

  • Vendor Payment Advices - Convert to SmartForms

    My customer is currently changing all their SAPScripts to SmartForms to use a new fax service called Fax Maker (apparently Fax Maker won't accept SAP Script).
    They run SAP 4.6C.
    They want to change the Vendor Payment Advice but this doesn't seem to be able to accept SmartForm entry in the configuration (SPRO >> Financial Accounting >> Accounts Rec & Accounts Pay >> Business Transactions >> Outgoing Payment >> Auto Outgoing Payment >> Payment Method >> Setup Pay Comp Codes for Payment Trans).
    How do I get Fax Maker to accept the Vendor Payment Advice?
    I thought I could get the SAPScript to produce a pdf file and send this, but I'm not sure on how to do this.
    Regards,
    Louise

    Dear Pernille,
    please kindly check the following hints to help you:
    1) Please check whether you selected the check box in the variant
    configuration "print payment advice".  The variant is of the variant
    that you maintain in the printout/data medium tab of transaction F110.
    2) Unfortunately it's technically not possible to send remittance
    advices per e-mail and to spool at the same time. You can only either
    send advices per e-mail or send them to spool. This is the standard
    system design.
    3) Please check FBZP to the desired company code and payment method to
    see if the customer has selected the flag "NoPaymentAdv.". It must be
    set as "Always payment Advice" and afterwards the advices via e-mail is
    executed.
    4) Please refer the documentation on the sample function module:
    'SAMPLE_PROCESS_00002040' in FIBF by following the Menu Path:
    FIBF > Environment > Infosystem (Processes) > Click 'Execute' >
    Select: 00002040 Autom. pmnt transactns: Output of pmnt advice note
    5) To send a business partner a payment advice note by fax or email,You
    must use the process interface 00002040 (Business Transaction Events)
    define the selection of the message type (printout, fax or email).
    Before you can do this, however, you must have carried out the
    necessary technical (Basis) settings for faxing or sending emails.
    6) Also consider the SAP note 836169.
    Thanks.
    Mauri

  • How to get Payment Advice details using REGUH  REGUP tables

    Hi,
    How to fetch payment Advice details in REGUH  REGUP tables by passing Header details of Payment document (BEKNR, BUKRS and GJAHR) ?
    My observation:
    E.g. for Payment document 1500000135 i am getting following records from REGUH table
    MANDT     LAUFD             LAUFI     ZBUKR    LIFNR                       VBLNR
    300            15.04.2010     00009O     1000     AB6666               1500000135
    300            16.04.2010     00002O     1000     AB6666               1500000135
    300            17.04.2010     00001O     1000     AB6666               1500000135
    While debugging driver program for Check print i have observed that REGUH contain entry as
    300            17.04.2010     00001*                 1000             AB6666               1500000135
    For other document also i have found that its picking up last entry from REGUH (i have relate 00001O with 00001*) and accordingly its displaying records on Check
    Correct if my observation is wrong
    Whats the meaning of LAUFI 'Additional Identification' ?
    While displaying Check is the program always picks last/latest payment run entry from REGUH?
    thanks,
    Edited by: Amol Deshpande on Apr 19, 2010 9:41 AM

    Hi Suhas,
    But if we are making payments through F-58 and FBZ5 transaction then these both tables REGUH REGUP also get updated. in such case how does system determines --> Payment Run id
    Payment Run id (REGUH-LAUFI) is crucial for me to fetch Payment details from REGUP table
    also tell me when does system generates multiple lines for single payment document in REGUH ?
    Please share your views

  • Idoc for customer payment advice

    Hi all,
    We receive Idoc for payment advice from customer. Can some body tell me how can I read this information to match the invoice.I mean how can I map Idoc field to SAP internal tables.
    How do I know which Idoc field will hit which SAP table & which table.
    So please guide me about Idoc mapping & finding appropriate field for inbound idocs.
    Edited by: Nik Wallace on Aug 5, 2008 8:04 AM

    Hello,
    Customer of vendor payment advice is the advice informing the customer that the amount has been paid against which invoices.
    You need to configure the payment advice in FBZP or give them as part of variant in F110.
    When you run the automatic payment program, based on the FBZP settings, a payment advice gets triggered.
    You are able to see your payment advice in SP02. To generate payment advice correctly, please make sure your settings in Variant (F110) are correct. Any invalid entries will result in NO generation of payment advice.
    Hope this is useful to you.
    Regards,
    Ravi

  • FAST Entry- A/P

    Hi Gurus
    Pls let me know whether we can post different vendor invoices and payments at a time, but document numbers should be different for every entry. eg:-  Rent payment
    Vendor a/c DR. [many vendors are there- need to post as if one    document but different doc nos should be generated for each vendor]
    To Bank a/c CR.
    If this can be done, there is an advantage to reverse the payment for individual vendor.
    Kindly help
    Regards
    Vikram

    Hi,
    If only one fast entry screen will be used for your infotype, just leave screen control in T588Q as blank.
    And just make sure the screen control value is the same when you Assign screen control to infotype menu 07 (fast data entry) and Define infotype text for new assigned screen.
    Screen control just used for the case if there are many different fast entry screens you want implement into PA70.
    For 'My screen aprears correctly but alwalys in display only', just check the code of your fast entry screen, I think it should be different from overview screen. As you said you just copy the overview screen, I suggest you change it. Also I suggest you to refer infotye P0015(module pool MP001500, screen 5000).
    Hope helps,
    Chen Jian

Maybe you are looking for

  • Some items are grey on my iPad when in iTunes, but do not show up on my iPad

    There are 3 TV shows that I loaded previously onto my iPad.  I've deleted all three, but everytime I connect my iPad to my computer, the 3 shows are still present according to iTunes, though the titles are grey, not black.  I can delete them, in the

  • Is there a way to delete Windows files on reboot?

    I'm interested in creating an installer similar to apt-get on Linux. The idea is it will update packages when new ones become available, resolve dependecies, etc. The problem is under Windows if a file is locked in memory you can't touch it so I woul

  • In Web Gallery HTML, how can I show Slide Titles?

    I am trying to use the HTML Gallery module within Bridge to create a photo archive. In all respects the appearance of this module is perfect for what i want to do, however it does not display the slide title. Some of the other modules do display the

  • Aperture Unable to process RAW files even though finder shows a preview

    I have recently upgraded to Aperture 3.0 which decided to delete my library. Using PhotoRec i am slowly recovering all of my files. The files that have been recovered are .cr2 files and .jpg files. The jpegs display fine without a problem however eve

  • Need help in DB adapter

    please help in creating a DB adaptor service using BPEL. Send some URL. i am using olite not oracle databse so the typical oracles's example is irritating....