TCode in CRM to upload a file

Is there any tcode in crm to upload a file in application server
for example in R/3 we have CG3Z
is there any way
Please i need only Transaction code

You can make your own custom code with following simple code:-
  CALL FUNCTION 'C13Z_FRONT_END_TO_APPL'
       EXCEPTIONS
            OTHERS  = 1.
-Dhirendra

Similar Messages

  • Unable to see the logical path and file created in FILE tcode from AL11 and unable to upload the file to this path from front end

    Hi Experts,
    I have created the logical path and filename in FILE tcode.I am trying to upload the pdf file to application server by using this path.But
    I am getting message like "Unable to open the file".Even I cannot find the this path in AL11 tcode.Kindly anyone advise how to upload pdf file using
    custom path and file created from FILE tcode.
    Thanks & Regards,
    Anusha.

    Hi Anusha,
    Please give as below.
    I forget to say you cannot open the PDF in AL11 and for that you need some configuration, i think it can be done using content server,not sure completely please wait for some more suggestions.
    Regards,
    Pavan

  • Uploading image file using tcode se78  occuring some   Error

    Hai Gurus
          I am uploading image file using tcode se78 but while Uploading it giving some error i cant resolve the problem so any one help me plz
    Error    "Graphic LOGO could not be saved (2LOGO)"
    Regards
    Selvendran

    Hai
    Thanks
    I had done in all method but i can't save it 
    error is coming ..so plz help me to upload the image
    Error "Graphic LOGO could not be saved (2LOGO)"
    Regards
    Selvendran

  • Create BDC group per uploading excel file to fill data in Tcode FB01l

    hi experts,
    i'm using BDC to run T-code FB01L . for this i'm uploading excel file for input data. my requiremenr=t is as follows : "
    only one BDC group should be created per uploading file."  But  At this moment BDC group is created per document. For user it is not possible to handle, say 1000 BDC groups.
    please suggest.
    Thanks
    Deepika

    The answer is simple and you should be able to work it out yourself but I am feeling generous today.
    I am assuming that each line in your excel spreadsheet is a document. The easiest way to do this is simply build up youd BDC table first then create the group.
        <- build your bdc table before opening the group ->
        call function 'BDC_OPEN_GROUP'
          exporting
            group = p_group
            keep  = p_keep
            user  = p_uname.
        call function 'BDC_INSERT'
          exporting
            tcode            = 'FB01'
          tables
            dynprotab        = gt_bdcdata
          exceptions
            internal_error   = 1
            not_open         = 2
            queue_error      = 3
            tcode_invalid    = 4
            printing_invalid = 5
            posting_invalid  = 6
            others           = 7.
    call function 'BDC_CLOSE_GROUP'
    In the future please do a search on SDN. I have also moved this thread to the ABAP General forum as this is not related to ABAP OO.

  • Upload Excel File from Portal (R/3 working fine)

    Hi Experts!!
    We have a report in which we are uploading an excel file from presentation server into an itab. When F4 clicked for file path, browser will open for choosing the path. Now, we have created an iView in Portal for this t-code. However, F4 is not working from Portal, rather giving an error 'Please wait. You will be forwarded automatically. This page had to be included for technical reasons.'.
    We need to upload excel file even from Portal too. Can somebody please give me some inputs or suggestions?

    Hi Jigar,
    Now I am able to get into SAP screen. However it's not opening the t-code that I mentioned. I gave some Z t-code ZTEST. Once I check the iView, it is showing SAP screen with the below things:
    Service Type:
    Service ID:
    TCode: ZTEST
    Object Type:
    Key:
    Field 1:
    Val. 1:
    Field 2:
    Val.2:
    Field 3:
    Val 3:
    And at the bottom it's giivng a warning message:
    Object type or object does not exist
    Message no. 1W001
    In iView properties I can see Object Type as com.sapportals.portal.iview. Is this the same Object Type that the message is talkign about? Can you please help me out?

  • Error while uploading a file via GS_CM

    Dear experts,
    When we try to upload some files to CRM incident via GS_CM we gen a following error: "operation is not allowed (crm_p_ord)"
    We noticed that the error usually arrears when we upload files with long file names ( 30> chars)
    It's important to say that we can add files having a shorter file name( up to ~30 chars).
    Does anyone know the limitations about the file name (length, special characters, etc.) ?
    We are using CRM7 (ICM).
    Thank you

    Hi,
        Covert quantity to char and upload the data.
    Regards
    Amole

  • How to upload CSV file w/o ,, for the last line

    Hi Experts,
    As part of one interface uploading the csv file (4coulmns) manually using the TCODE: CSCA_FILE_COPY.
    After uploading when i see in the AL11 as it is csv file it is filling the , in each space.
    But my issue while running the interface (because of logic in it) checking for the hash total in the last line where (record count, hash total) only 2 items should come but because of manual upload adding the (record count, hash total, , ,) another two spaces.
    Where program not moving further becasue the it is alway comparing the amounts (1000.00 not matching with 1000.00, , ) it is not processing. In production files directly load in to unix server so no issues and i can't ask to change the program code...because iam not following the process. As part of testing i've to do manually only.
    Please suggest the workaround for this.
    Is it possible to change the contents directly in AL11 directly....then HOW ?
    or
    How to create a csv file w/o , , in the last line (may be it is not possible) ?
    Thanks for your replies in advance.
    Regards
    VVR

    I don't think you can edit from AL11, nor creating a CSV without those commas at the end because are created to state fields with empty value.
    You have 6 columns filled with values but for the last line you only fill the first four. It is expected to appear , , for the last 2 columns on the last line.
    I can only suggest keep doing it manually before uploading the CSV file... or... you are saying you can't change the program.
    How about upload all CSV files... then writing another program to get those files from AL11 and delete the spare commas at the end line?
    Cheers,
    Andres.

  • Uploading excel files into Web UI

    We are following the blog http://wiki.sdn.sap.com/wiki/display/CRM/CRMWebUI-UploadingdatafromExcelfiles
    to upload excel files into Web UI.
    The  problem which we are facing is that the values are not getting populated in the text are and in the
    event handler EH_ONSERVEREVENT, no values are being populated in lt_items table.
    It would be great if someone could help us with this.

    Hi Nidhi,
    I have tried the blog but due to some reason, could not get it worked out.
    But, If U are ok to use CSV input files, instead of excel, U can use the standard component "GS_FILE_UPLOAD" as a popup and upload the files into the required assignment blocks.

  • Problem in upload the file...

    Hi Gurus,
    I am new  in ABAP. I want to upload a file to Application Server.
    1. I create a file in Excel and give extension .prn and save on desktop so i think this file is on my presentation server.
    2. Now thru ABAP Editor i want to upload this file to Application Server
       Because i have to use this file in BDC.
    please give me the process..
    Thanks in Advance..
    Kind Regards
    Yogesh

    Hi Yogesh,
       As per the above suggestion you can use CG3Z tcode to upload your file directly from PS(Prersentation Server) to AS (Application Server).
       Otherwise if you need the procedure for coding, then first sav the file in .xls or .csv  or any format and upload the file into an internal table using any standard FM as per the extension ehich you use. Later use OPEN DATASET stmt. and open a file in AS and pass the data from your Internal table into this file through TRANFSER  stmt and after completing the required process use CLOSE DATASET stmt accordingly.
    Hope this resolves your query.
    Reward all the helpful answers.
    Regards
    Nagaraj T

  • Upload large file in sharepoint

    hi
    is it possible upload large file in sharepoint in our scenario we need upload large file >3gb in document libraries
    where sharepoint store files? is there any way we can have a custom aspx page for uploading large files in chunks in document library?
    kindly suggest.
    Thankyou

    is not possbile upload more than 2Gb
    If you try to upload big files you will need to make some change on your Sharepoint to support the 2Gb.
    Error message when you try to upload a large file to a document library on a Windows SharePoint Services 3.0 site: "Request timed out"
    http://support.microsoft.com/?id=925083
    With files bigger than 2GB can recomend creeate linked files to that files where you can download.
    André Lage Microsoft SharePoint and CRM Consultant
    Blog:http://aaclage.blogspot.com
    Codeplex:http://spupload.codeplex.com/http://simplecamlsearch.codeplex.com/

  • Field not visible when uploading the file in application ser

    Hi,
    I have added a new field at the end of a structure and When i upload the data in the application server it is not visible there. The new field length is 30chars(say field 'A')  and the one just before this one is 250 chars(say field 'B'). When i reduce the length of field 'B' to 30 chars or 40 chars the value which i populated in field 'A' is visble in the output file.
    Since the complete file was not visible in AL11 transaction, i used the CG3Y tcode as well to download the data to presentation server so that i can view the complete file. Even after downlaoding in presentation server the new field value is not visible.
    Can anyone please suggest why is the value in field 'A' not visible when the length of field 'B' is 250 chars? Also, how can i display the value of the new field in the application server.I cannot change the layout of the structure as per the requirement. Any help will be very useful.
    Thanks in advance,
    Sneha.

    Hi Sneha.. Happy new year
    <you subject is missing ver from the server, thats why your server doesnt like you :P>
    -ok, lets go step by step. how did you upload the file?
    -after uploading the file check the file in OS level(goto SM69, execute CAT, in additional parameter (not in parameter) give the full path (case sensitive), execute. ). here you can see the actual content of the file... check you data is present or not
    -which structure are you using to download and upload? a temp work area.. then please provide the WA details, so that i can try on my system.
    lets see what happens next
    one more thing: regarding AL11, it can read upto length 510 characters. check program RSWATCH0 form SHOW_FILE. here the read dataset into butffer is 510 characters.

  • HOw to upload test files in XI directory

    Hi all,
    I want to upload test file from my local system to XI directory. how can i do this. There is one customized transaction cg3z for this . but consider that this is not available in my case. Is there any alternative way to upload the file in to XI directory.
    Thanks and Regards
    Sachin Sharma

    Hi,
    if client and server are in same network the u can configure your file adapter using NFS protocal.
    if they are in different network the you can upload using SXDA_TOOLS tcode.
    The porcedure to put a file on server is as shown below:
    1. Save your file in your local machine.
    2. In XI server, enter the tranaction code "SXDA_TOOLS".
    3. In the input screen, enter:
    i) Object Type "DXPROJECT".
    ii) Program Type "BAPI".
    iii) Program "CREATE".
    4. Press Copy (Ctrl+F5) button.
    5. Now, you will get another screen in which you will see 3 blocks called as "Source", "Target" and "Copy with/without conversion".
    6. In Source block, choose the radio button "Presentation Server" and then take F4 help to select your source file. (file which you have saved on your local machine)
    7. In TARGET block select the radio button "Application Server", check the box "Remote server" and take F4 help to select your application server.
    8. In the same block under "File Type" select "P physical file name" and under "File Name" write the path/directory name which you have mentioned in your communication channel along with the file name.
    Example: suppose file name in your Comm Chanel is "demo.xml" and directory path is "/abc/testfiles/XML/", then in step 8 write "/abc/testfiles/XML/demo.xml".
    Note: need not to do any thing in 3rd block.
    Regards,
    pradeep A.

  • Error in uploading a file in server

    Hi,
    We are working in a application whose technologies are Flex 4.0 and .Net 2010.
    We are using .Net WCF Service for interacting with backend from the Flex front end.
    In our application, we have requirement to upload a file from the client into a server.
    We faced the following issue,
    Security violation Issue #2032.
    Solution: We have found that there is a sandbox restriction to access other domains, then we have placed the crossdomain.xml, which resolves the issue.
    But this solution works only in the IE.
    We are still getting the same error (Error #2032: Stream Error.) in other browsers - FireFox, Chrome and Safari.
    Please let us know if there are any suggestions or solutions for this issue.
    Regards,
    Guru

    Siva,
    You must apply modifiable binary type in wdDoInit of controller:
    ISimpleType stype =
      wdContext
        .node<YourNode>()
          .getNodeInfo()
            .getAttribute("FileResource")
              .getModifiableSimpleType();
    IWDModifiableBinaryType mtype = (IWDModifiableBinaryType)stype;
    /* Optional steps: affects only FileDownload control */
    /* mtype.setMimeType( WDWebResourceType.JPG_IMAGE);  */
    /* mtype.setFileName( "picture.jpg" );               */
    Sure, to make above work you must use binary type in context designer.
    Valery Silaev
    SaM Solutions
    http://www.sam-solutions.net

  • How to upload a file in application server to an internal table

    Hi,
          I am asked to upload a file from application server to internal table. Can you please suggest me the ways to do it or the function module which helps to browse the application server file names.
      I have done a program. But its giving problem in searching the files from application server. I am pasting my code for ur review. Please tell me which part i have to correct or suggest me some other ways to do it.
    *& Report  ZUPLOAD1
    REPORT  ZUPLOAD1.
    type-pools: truxs.
    parameters: p_upl_ps radiobutton group g1 default 'X', "upload from pres. server
                 p_path type rlgrap-filename, 
                 p_upl_as radiobutton group g1,   "upload from appln server
                 <b>p_dir LIKE filepath-pathintern DEFAULT 'Y_ABAP', 
                 p_file LIKE filepath-pathintern lower case,</b>      
                 p_test as checkbox.
    constants: c_x value 'X',
               c_tab type c value cl_abap_char_utilities=>horizontal_tab.
    types: ty_data(1000) type c.    "structure to hold legacy data
    data: i_data type standard table of ty_data. "internal table of ty_data
    types: begin of stritab,
          land1 type v_t604-land1,  "structure of legacy file.
          stawn type v_t604-stawn,
          bemeh type v_t604-bemeh,
          impma type v_t604-impma,
          minol type v_t604-minol,
          end of stritab.
    data: gi_itab type standard table of stritab, "internal table of legacy file
          gw_itab type stritab.  "work area
    data: i_raw type truxs_t_text_data,
          v_fullpath type string.
    at selection-screen on value-request for p_path.
    if p_upl_ps = c_x. "if presentation server is selected
    perform get_file.
    else.            "if application server is selected
    perform set_file_path.      
    perform upload_from_server.
    perform split_data.
    endif.
    form get_file.
    CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME        = SYST-CPROG
      DYNPRO_NUMBER       = SYST-DYNNR
      FIELD_NAME          = ' '
    IMPORTING
       FILE_NAME           = p_path.     "getting the file name of pres server
    CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
      EXPORTING
      I_FIELD_SEPERATOR          =
        I_LINE_HEADER              = 'X'              "converting excel to sap and filling in
        I_TAB_RAW_DATA             = i_raw      "internal table
        I_FILENAME                 = p_path
      TABLES
        I_TAB_CONVERTED_DATA       = gi_itab
    EXCEPTIONS
       CONVERSION_FAILED          = 1
       OTHERS                     = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    endform.
    form set_file_path.                 "Getting the file path of application server
    data: lv_file type p_file.
          lv_file = p_file.
          CALL FUNCTION 'FILE_GET_NAME_USING_PATH'
            EXPORTING
            CLIENT                           = SY-MANDT
              LOGICAL_PATH                     = p_dir
            OPERATING_SYSTEM                 = SY-OPSYS
            PARAMETER_1                      = ' '
            PARAMETER_2                      = ' '
            PARAMETER_3                      = ' '
            USE_BUFFER                       = ' '
              FILE_NAME                        = lv_file
            USE_PRESENTATION_SERVER          = ' '
            ELEMINATE_BLANKS                 = 'X'
           IMPORTING
             FILE_NAME_WITH_PATH              = v_fullpath
           EXCEPTIONS
             PATH_NOT_FOUND                   = 1
             MISSING_PARAMETER                = 2
             OPERATING_SYSTEM_NOT_FOUND       = 3
             FILE_SYSTEM_NOT_FOUND            = 4
             OTHERS                           = 5
          IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
    endform.
    form upload_from_server.
    data: lv_msg type string,
          lw_data type ty_data.
    open dataset v_fullpath for input message lv_msg in text mode encoding default.
    if sy-subrc <> 0.
    message lv_msg type 'i'.
    stop.
    endif.
    do.
    read dataset v_fullpath into lw_data.
    if sy-subrc <> 0.
    write:/5 'Error in processign data set'.
    exit.
    endif.
    append lw_data to i_data.
    enddo.
    close dataset v_fullpath.
    if sy-subrc <> 0.
    write: /5 'Error closing dataset'.
    endif.
    endform.
    form split_data.
    data: lw_data type ty_data.
    data: lw_itab type stritab.
    data: begin of ty_itab,
          land1 type v_t604-land1,
          stawn type v_t604-stawn,
          bemeh type v_t604-bemeh,
          impma type v_t604-impma,
          minol type v_t604-minol,
          end of ty_itab.
    loop at i_data into lw_data.
    split lw_data at c_tab into
          ty_itab-land1
          ty_itab-stawn
          ty_itab-bemeh
          ty_itab-impma
          ty_itab-minol.
    lw_itab-land1 = ty_itab-land1.
    lw_itab-stawn = ty_itab-stawn.
    lw_itab-bemeh = ty_itab-bemeh.
    lw_itab-impma = ty_itab-impma.
    lw_itab-minol = ty_itab-minol.
    append lw_itab to gi_itab.
    endloop.
    endform.
    start-of-selection.
    loop at gi_itab into gw_itab.
    write: /5 'COUNTRY', 'IMPORT CODE', 'SUP UNIT', 'FIRST UOM', 'SECOND UOM',
           /5 gw_itab-land1, gw_itab-stawn,gw_itab-bemeh,gw_itab-impma,gw_itab-minol.
    endloop.
    end-of-selection.
    I hope problem must be in p_dir and p_file which are in bold.. Kindly help me out. Thanks in advance.

    see the following ex:
    *&      Form  SUB_GET_FILEPATH
          text
    -->  p1        text
    <--  p2        text
    FORM SUB_GET_FILEPATH .
        GFILE = 'D:\SAP_INT\INBOUND\INBOX'.  "Path
    ENDFORM.                    " SUB_GET_FILEPATH
    *&      Form  SUB_GET_FILE
          text
    -->  p1        text
    <--  p2        text
    FORM SUB_GET_FILE .
      DATA: P_FDIR(200) TYPE C.
      DATA: IT_FILEDIR1 TYPE STANDARD TABLE OF TY_FILEDIR WITH HEADER LINE.
      P_FDIR = GFILE.
      CALL FUNCTION 'RZL_READ_DIR_LOCAL'
        EXPORTING
          NAME     = P_FDIR
        TABLES
          FILE_TBL = IT_FILEDIR.
      REFRESH : IT_FILEDIR1.
      LOOP AT IT_FILEDIR.
        IF IT_FILEDIR-NAME(4) = 'ZINC' OR IT_FILEDIR-NAME(4) = 'zinc'.
          MOVE IT_FILEDIR-NAME TO IT_FILEDIR1-NAME.
          APPEND IT_FILEDIR1.
        ENDIF.
      ENDLOOP.
      IF IT_FILEDIR1[] IS INITIAL.
        STOP.
      ENDIF.
      LOOP AT IT_FILEDIR1.
        REFRESH: I_TAB.
        CLEAR: I_TAB.
        NAME = IT_FILEDIR1-NAME.
        CONCATENATE: GFILE '\' NAME INTO G_FILE.
        OPEN DATASET G_FILE FOR INPUT IN TEXT MODE
                                         ENCODING DEFAULT
                                         IGNORING CONVERSION ERRORS.
        IF SY-SUBRC EQ 0.
          CONCATENATE 'FILENAME  : ' G_FILE INTO I_MSG1.
          APPEND I_MSG1.
          DO.
            READ DATASET G_FILE INTO RECORD.
            IF SY-SUBRC = 0.
              SPLIT RECORD AT ',' INTO I_TAB-BUKRS  I_TAB-EBELN
                  I_TAB-BLDAT  I_TAB-XBLNR I_TAB-LIFNR I_TAB-AMOUNT
                  I_TAB-CURR  I_TAB-BUSAREA
                  I_TAB-BKTXT I_TAB-DMBTR I_TAB-MENGE I_TAB-SRNO.
              MOVE-CORRESPONDING I_TAB TO I_TAB1.
            ELSE.
              EXIT.
            ENDIF.
            APPEND I_TAB1.
            CLEAR: I_TAB, I_TAB1.
          ENDDO.
        ENDIF.
        CLOSE DATASET G_FILE.

  • Error while uploading WSDL file in Interactive Form Data Connection!

    I have created we service to return some data based on user input.
    I am trying to link this webservice to Interactive adobe form! and While creating new data connection->uploading WSDL file--> I am receiving error i.e. Invalid File.
    Please help me in resolving this issue.
    I have created this WSDL file copy/pasting XML code generates from "Open WSDL document for selected binding" link in SOAMANAGER.
    Regards,
    Naveen.I

    Hello,
    This is a Webservice created for the FM : HRXSS_PER_READ_EMERGENCY_AR
    Here is the sample of the WSDL file generated, as asked by you.
    <?xml version="1.0" encoding="utf-8" ?>
    - <wsdl:definitions targetNamespace="urn:sap-com:document:sap:soap:functions:mc-style" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="urn:sap-com:document:sap:soap:functions:mc-style" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:n1="urn:sap-com:document:sap:rfc:functions">
    - <wsdl:documentation>
      <sidl:sidl xmlns:sidl="http://www.sap.com/2007/03/sidl" />
      </wsdl:documentation>
      <wsp:UsingPolicy wsdl:required="true" />
    - <wsp:Policy wsu:Id="BN_BN_ZHR_READ_EMERGENCY">
      <saptrnbnd:OptimizedXMLTransfer uri="http://xml.sap.com/2006/11/esi/esp/binxml" xmlns:saptrnbnd="http://www.sap.com/webas/710/soap/features/transportbinding/" wsp:Optional="true" />
      <saptrnbnd:OptimizedXMLTransfer uri="http://www.w3.org/2004/08/soap/features/http-optimization" xmlns:saptrnbnd="http://www.sap.com/webas/710/soap/features/transportbinding/" wsp:Optional="true" />
    - <wsp:ExactlyOne xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:sapsp="http://www.sap.com/webas/630/soap/features/security/policy" xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702" xmlns:wsa="http://www.w3.org/2005/08/addressing" xmlns:wsu="http://schemas.xmlsoap.org/ws/2002/07/utility">
    - <wsp:All>
    - <sp:TransportBinding>
    - <wsp:Policy>
    - <sp:TransportToken>
    - <wsp:Policy>
      <sp:HttpsToken />
      </wsp:Policy>
      </sp:TransportToken>
    - <sp:AlgorithmSuite>
    - <wsp:Policy>
      <sp:TripleDesRsa15 />
      </wsp:Policy>
      </sp:AlgorithmSuite>
    - <sp:Layout>
    - <wsp:Policy>
      <sp:Strict />
      </wsp:Policy>
      </sp:Layout>
      </wsp:Policy>
      </sp:TransportBinding>
      </wsp:All>
      </wsp:ExactlyOne>
      </wsp:Policy>
    - <wsp:Policy wsu:Id="IF_IF_ZHR_READ_EMERGENCY">
    - <sapsession:Session xmlns:sapsession="http://www.sap.com/webas/630/soap/features/session/">
      <sapsession:enableSession>false</sapsession:enableSession>
      </sapsession:Session>
      <sapcentraladmin:CentralAdministration xmlns:sapcentraladmin="http://www.sap.com/webas/700/soap/features/CentralAdministration/" wsp:Optional="true" />
      </wsp:Policy>
    - <wsp:Policy wsu:Id="OP_IF_OP_HrxssPerReadEmergencyAr">
      <sapcomhnd:enableCommit xmlns:sapcomhnd="http://www.sap.com/NW05/soap/features/commit/">false</sapcomhnd:enableCommit>
      <sapblock:enableBlocking xmlns:sapblock="http://www.sap.com/NW05/soap/features/blocking/">true</sapblock:enableBlocking>
      <saptrhnw05:required xmlns:saptrhnw05="http://www.sap.com/NW05/soap/features/transaction/">no</saptrhnw05:required>
      <saprmnw05:enableWSRM xmlns:saprmnw05="http://www.sap.com/NW05/soap/features/wsrm/">false</saprmnw05:enableWSRM>
      </wsp:Policy>
    - <wsdl:types>
    - <xsd:schema attributeFormDefault="qualified" targetNamespace="urn:sap-com:document:sap:rfc:functions">
    - <xsd:simpleType name="char1">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="1" />
      </xsd:restriction>
      </xsd:simpleType>
    "More simple types
      <xsd:pattern value="\d*" />
      </xsd:restriction>
      </xsd:simpleType>
      </xsd:schema>
    - <xsd:schema attributeFormDefault="qualified" targetNamespace="urn:sap-com:document:sap:soap:functions:mc-style" xmlns:n0="urn:sap-com:document:sap:rfc:functions">
      <xsd:import namespace="urn:sap-com:document:sap:rfc:functions" />
    - <xsd:complexType name="Bapiret2">
    - <xsd:sequence>
    "More element names
    - <xsd:complexType>
    - <xsd:sequence>
      <xsd:element name="Messages" type="tns:Bapirettab" />
      <xsd:element name="Records" type="tns:HcmtBspPaArR0006Tab" />
      <xsd:element name="Records2" type="tns:HcmtBspPaArR0021Tab" />
      </xsd:sequence>
      </xsd:complexType>
      </xsd:element>
      </xsd:schema>
      </wsdl:types>
    - <wsdl:message name="HrxssPerReadEmergencyAr">
      <wsdl:part name="parameters" element="tns:HrxssPerReadEmergencyAr" />
      </wsdl:message>
    - <wsdl:message name="HrxssPerReadEmergencyArResponse">
      <wsdl:part name="parameter" element="tns:HrxssPerReadEmergencyArResponse" />
      </wsdl:message>
    - <wsdl:portType name="ZHR_READ_EMERGENCY">
    - <wsp:Policy>
      <wsp:PolicyReference URI="#IF_IF_ZHR_READ_EMERGENCY" />
      </wsp:Policy>
    - <wsdl:operation name="HrxssPerReadEmergencyAr">
    - <wsp:Policy>
      <wsp:PolicyReference URI="#OP_IF_OP_HrxssPerReadEmergencyAr" />
      </wsp:Policy>
      <wsdl:input message="tns:HrxssPerReadEmergencyAr" />
      <wsdl:output message="tns:HrxssPerReadEmergencyArResponse" />
      </wsdl:operation>
      </wsdl:portType>
    - <wsdl:binding name="ZHR_READ_EMERGENCY" type="tns:ZHR_READ_EMERGENCY">
    - <wsp:Policy>
      <wsp:PolicyReference URI="#BN_BN_ZHR_READ_EMERGENCY" />
      </wsp:Policy>
      <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
    - <wsdl:operation name="HrxssPerReadEmergencyAr">
      <soap:operation soapAction="" style="document" />
    - <wsdl:input>
      <soap:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
      </wsdl:binding>
    - <wsdl:service name="service">
    - <wsdl:port name="ZHR_READ_EMERGENCY" binding="tns:ZHR_READ_EMERGENCY">
      <soap:address location="http://cieh4-srvr.collabera.com:8000/sap/bc/srt/rfc/sap/zhr_read_emergency/900/zhr_read_emergency/zhr_read_emergency" />
      </wsdl:port>
      </wsdl:service>
      </wsdl:definitions>
    Cheers,
    Remi

Maybe you are looking for