Upload Excel File from Portal (R/3 working fine)

Hi Experts!!
We have a report in which we are uploading an excel file from presentation server into an itab. When F4 clicked for file path, browser will open for choosing the path. Now, we have created an iView in Portal for this t-code. However, F4 is not working from Portal, rather giving an error 'Please wait. You will be forwarded automatically. This page had to be included for technical reasons.'.
We need to upload excel file even from Portal too. Can somebody please give me some inputs or suggestions?

Hi Jigar,
Now I am able to get into SAP screen. However it's not opening the t-code that I mentioned. I gave some Z t-code ZTEST. Once I check the iView, it is showing SAP screen with the below things:
Service Type:
Service ID:
TCode: ZTEST
Object Type:
Key:
Field 1:
Val. 1:
Field 2:
Val.2:
Field 3:
Val 3:
And at the bottom it's giivng a warning message:
Object type or object does not exist
Message no. 1W001
In iView properties I can see Object Type as com.sapportals.portal.iview. Is this the same Object Type that the message is talkign about? Can you please help me out?

Similar Messages

Uploading excel files from ITS to sap

Hi all,
I want to upload excel files from ITS to sap system ECC 6.0 .I am using standalone ITS.Someone please help me find a solution for this.What are the steps involved in it?
Thanks in advance
Shinu

Hi Shinu,
this seems to be a misunderstanding. The ITS does not have excel files.
Did you mean to say that you have an application which allows to upload
files? This application might work using the webgui service of the ITS.
Try it out!
best regards
Tobias

How do I get MacPro iPhoto events downloaded to my iPad mini? Uploading photo streams from mini to Mac works fine.

How do I get MacPro iPhoto events downloaded to my iPad mini? iCloud is set up. Uploading photo streams from mini to Mac works fine.

Set up the events as albums on your Mac Pro in iPhoto. Then use iTunes to sync your iPad.
Start iTunes on your Mac Pro. Connect your iPad and select it in the left sidebar. If you do not see a left sidebar use the View menu to View Sidebar.
Once you select your iPad look in the right window and find the Photos tab. Select the album or albums you want copied from iPhoto on your Mac Pro to your iPad. Then click on Apply.

Upload XL file from FTP server

Hi All,
Can anybady help me, how to upload Excel file from FTP server.
Thanks
Sri
Edited by: srikanthn on Apr 14, 2010 6:31 PM

Hello
How about using SAPFTP?
I hope SAP note 130106 will guide you on this.
Thanks
koju

Upload and save an Excel file from a local machine to SAP

I am looking for a transaction which allows me to upload an Excel file from a local machine to SAP and save this file (the users should be able to edit the file in SAP afterwards).
Then I would like to open and read the data from the file with the help of a function module which works as a background job.
Unfortunately, I cannot use the application server because our users do not have the authorization to save files on it. Besides, the application server is not able to process Excel files.
Thank you in advance.
Stephan Klumpp

Hi Stephan,
You can do this using OLE technology. Bu you will have performance issues.
Can you check the below demo programs? It has similar functionality. I am able to create excel sheet from sap and also able to save the data in the sap.
SAPRDEMOEXCELINTEGRATION
SAPRDEMOEXCELINTEGRATION2
Please also check the below rograms for more help.
SAPRDEMOACTIVEXINTEGRATION
SAPRDEMODOCUMENTCONTAINER
SAPRDEMODOCUMENTCONTAINER2
Thanks
Ramakrishna

Uploading a file from jsp page on weblogic portal 9.2 into VCR content node

I am working on Content Management in Weblogic Portal 9.2 using the com.bea.content API. I have succedded to the extent that I have created "Node" both Hierarchy and Content Node in the Virtual Content Repository using the CM API from a JSP.
Now I have to upload a file from this JSP into VCR Content Node. I am facing some problems. I am not able to figure out which class to use for this purpose from CM API. Please help in this regard.

Hi,
You need to ensure you're using an ObjectClass with a PropertyDefiition of type Property.BINARY. Then, construct a BinaryValue with your InputStream. Use that to construct the Value and Property for the Node you're creating or updating.
-Ryan

After uploading an excel file from Windows XP, impossible to read the file anymore

Hello,
I uploaded an excel file from my Imac to the Icloud. I could use it on my Ipad through Numbers without problem. I went on my laptop running with Windows XP, I didn't see the plugin to install, so I didn't do it. I download this excel file and worked on it. When I uploaded again this file, I could see the letter E written on the file on the Icloud, but impossible to download it and work on it anymore from any of my devices. I installed the missing plugin on the laptop but still, no improvements.
Any suggestions ?
Best regards.

Hi Stephan,
You can do this using OLE technology. Bu you will have performance issues.
Can you check the below demo programs? It has similar functionality. I am able to create excel sheet from sap and also able to save the data in the sap.
SAPRDEMOEXCELINTEGRATION
SAPRDEMOEXCELINTEGRATION2
Please also check the below rograms for more help.
SAPRDEMOACTIVEXINTEGRATION
SAPRDEMODOCUMENTCONTAINER
SAPRDEMODOCUMENTCONTAINER2
Thanks
Ramakrishna

Uploading a file from excel

Hi All,
   can any one tell me the procedure for uploading a file from excel to ecatt.
   Regards,
   Afroz

Hi Afroz,
=>In SAPGUI release 6.40, one can directly attach the excel to test configuration.
=>In SAPGUI 6.20, read the excel using function module
'CL_GUI_FRONTEND_SERVICES=>GUI_UPLOAD' in ABAP-ENDABAP block. Find the count of lines. Using DO-ENDO loop using the count of lines as counter, assign the current set of data to transaction.
Regards.

Uploading Excel File and Reading Data from that File

<b>Hi
Can anyone Please tell me how to upload an Excel File in to the Web Dynpro Application and After that i want to read the data from that uploaded excel file in the Web Dynpro Application to the Web Dynpro table.
Plz help me to solve this.......
Regards
Chandran</b>

Hi,
Upload Excel file using File Upload UI
1)Add jxl jar folder in the lib folder of ur project.
2)Go to properties of ur project and add jar to ur project.
3)Using the File upload ui ,browse and upload the file.
4)Write the read file in to ur server location using fileoutput stream.
5)then using code u can read the excelfile from the server location itself.
Here is the code:
     IWDAttributeInfo attInfo =wdContext.getNodeInfo().getAttribute("upload");
/** get the name of excel file and storing it in the server with the same name and extention****/
binaryType=IWDModifiableBinaryTypeattInfo.getModifiableSimpleType();
fileuploaded = binaryType.getFileName();
byte b[] = wdContext.currentContextElement().getUpload();
File filename =new File("
<Server name>
<folde name>
" + fileuploaded);
try {
FileOutputStream out = new FileOutputStream(filename);
out.write(b);
out.close();
} catch (FileNotFoundException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
/**Readind from the server**/
int iRows = 0;
try {     Workbook wb = null;
     Sheet sheet = null;
     wb = Workbook.getWorkbook(filename);
     sheet = wb.getSheet(0);
     int iColumns = sheet.getColumns();
      iRows = sheet.getRows();
     int i = 0;
    //get Cell contents by (COLUMN, ROW);
    for (int r = 0; r < iRows; r++) {
   for (int c = 0; c < iColumns; c++) {
     Cell cell = sheet.getCell(c, r);
     characterarray<i> = cell.getContents();
//wdComponentAPI.getMessageManager().reportSuccess("Row"r characterarray<i>);
i++;
wb.close();
Declare Globally
//@@begin others
String fileuploaded;
IWDModifiableBinaryType binaryType;
String characterarray[] = new String[1000];
//@@end
Also look at this blog too /people/perumal.kanthan/blog/2005/03/21/reading-excel-data-from-java-using-hssf-api
Thanks and Regards,
Arun

SharePoint 2013 Foundation error when uploading Excel files

Hello
I have a specific problem. I have an xlsx file that I cannot upload in SharePoint. Normally our SharePoint can upload Excel files and other file formats normally but this one has data with nearly 5000 rows. The size of the file is less then 500 KB. The error
message is: "The URL is invalid. Perhaps it refers to a nonexistent file or folder, or it refers to a valid file or folder in the current Web." When I am uploading this file I am getting the same error message in every library. When I save
the file as a 97-2003 compatible xls then it works. Sometimes even Excel files with Macros won't upload.
Kind regards
ivicapro1987

Hi,
This issue occurs when the Version column is configured as an Indexed Column.
To work around this issue, remove the Version column from the list of Indexed Columns for the list that has this issue. To do this, follow these steps:
Browse to the list where the issue exists.
In the ribbon, click the Library tab, and then click
Library Settings.
In the fields list, click Indexed Columns.
In the Indexed Columns list, click Version.
Click Delete, and then click OK.
Upload any files that you previously experienced the issue with.
Reference:
https://support.microsoft.com/kb/2796640?wa=wsignin1.0
Best Regards,
Eric
Eric Tao
TechNet Community Support

Error while reading excel file from application server into internal table.

Hi experts,
My requirement is to read an excel file from application server into internal table.
Hence I have created an excel file fm_test_excel.xls in desktop and uploaded to app server using CG3Z tcode (as BIN file type).
Now in my program I have used :
OPEN DATASET v_filename FOR INPUT IN text mode encoding default.
DO.
READ DATASET v_filename INTO wa_tab.
The statement OPEN DATASET works fine but I get a dump (conversion code page error) at READ DATASET statement.
Error details:
A character set conversion is not possible.
At the conversion of a text from codepage '4110' to codepage '4103':
- a character was found that cannot be displayed in one of the two
codepages;
- or it was detected that this conversion is not supported
The running ABAP program 'Y_READ_FILE' had to be terminated as the conversion
would have produced incorrect data.
The number of characters that could not be displayed (and therefore not
be converted), is 445. If this number is 0, the second error case, as
mentioned above, has occurred.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_CODEPAGE', was not
caught and
therefore caused a runtime error.
The reason for the exception is:
Characters are always displayed in only a certain codepage. Many
codepages only define a limited set of characters. If a text from a
codepage should be converted into another codepage, and if this text
contains characters that are not defined in one of the two codepages, a
conversion error occurs.
Moreover, a conversion error can occur if one of the needed codepages
'4110' or '4103' is not known to the system.
If the conversion error occurred at read or write of screen, the file
name was '/usr/sap/read_files/fm_test_excel.xls'. (further information about
the file: "X 549 16896rw-rw----201105170908082011051707480320110517074803")
Also let me know whether this is the proper way of reading excel file from app server, if not please suggest an alternative .
Regards,
Karthik

Hi,
Try to use OPEN DATASET v_filename FOR INPUT IN BINARY mode encoding default. instead of OPEN DATASET v_filename FOR INPUT IN text mode encoding default.
As I think you are uploading the file in BIN format to Application server and trying to open text file.
Regards,
Umang Mehta

Upload Excel Files to ITable

Hi... maybe someone of you have been reading about how to upload excel files to an internal table using function module ALSM_EXCEL_TO_INTERNAL_TABLE.
The problem that I found with this technique is that it is not possible to use this FM with the SAP WAS because it gives a runtime dump (it only works if the file is on the client machine and if the function module is called from SAPGUI.
Then I have found the topic
Re: BSP and Excel
And one guy puts something interesting like this:
1. In the application use file upload to upload the file.
2. caputure the content and length
DATA: data TYPE REF TO CL_HTMLB_FILEUPLOAD.
data ?= CL_HTMLB_MANAGER=>GET_DATA(
request = runtime->server->request
name = 'fileUpload'
id = 'xx').
name = data->file_name.
content = data->file_content.
length = data->file_length.
content_type = data->file_content_type.
3. Then read the data using the class
DATA: conv TYPE REF TO CL_ABAP_CONV_IN_CE.
conv = CL_ABAP_CONV_IN_CE=>CREATE( input = CONTENT ).
conv->READ( importing data = Variable len = length ).
Now... has anyone continued with this sample? has anyone put the contents into an internal table (with the READ method)...
If someone did it please show me how to..
Thanks
Ariel

Hi Craig,
Ok, I was reading the Thomas's Blog and the thread about excel. The blog talks about encoding and the thread is about how to "download" the table. I want to upload the excel to an internal table.
So, I am almost finishing the code.. But I have a problem (named DUMP) when I create the "conv" object (check the code) the problem is because I dont know how to call the create method indicating 'UFT-16' as encoding.
I show you my "OnInputProcessing" code:
IF button_event->id = 'btnUpload'.
fileUpload ?= CL_HTMLB_MANAGER=>GET_DATA(
                       request = request
                       id      = 'txtFile'
                       name    = 'fileUpload' ).
IF ( fileUpload->file_name NE '' ) AND
     ( fileUpload->file_length GT 0 ).
     IF fileUpload->file_content_type
        = 'application/vnd.ms-excel'.
        DATA: content   TYPE ZMTVEMAT,
              conv      TYPE REF TO CL_ABAP_CONV_IN_CE,
              viewoff   TYPE REF TO CL_ABAP_VIEW_OFFLEN,
              it_off    TYPE ABAPOFFLENTAB,
              wa_off    TYPE ABAPOFFLEN,
              dd_fields TYPE DDFIELDS,
              wa_fields TYPE DFIES,
              len       TYPE I.
        conv = CL_ABAP_CONV_IN_CE=>CREATE(
                  encoding = 'UTF-16'
                  endian   = 'L'
                  input    = fileUpload->file_content ).
        CALL FUNCTION 'TR_NAMETAB_GET'
           EXPORTING
            IV_TABNAME                   = 'ZMTVMAT'
            IV_GET_LENGTHS_IN_CHARMODE   = 'X'
            IV_GET_TEXTS                 = ' '
           IMPORTING
            ET_DFIES                     = dd_fields.
            LOOP AT dd_fields INTO wa_fields.
              MOVE wa_fields-offset TO wa_off-ioff.
              MOVE wa_fields-intlen TO wa_off-ilen.
              APPEND wa_off TO it_off.
            ENDLOOP.
   viewoff = CL_ABAP_VIEW_OFFLEN=>CREATE( tab = it_off ).
            conv->READ(
                        exporting
                          view = viewoff
                        importing
                          data = content
                          len = len ).
This is the DUMP
Runtime Errors         CONVT_CODEPAGE_INIT
Exception              CX_SY_CODEPAGE_CONVERTER_INIT
       Occurred on     30.11.2004 at 13:20:47
The conversion of some code pages is not supported.
What happened?
The conversion of texts in code page 'UTF-' to code page '1100' is not
supported.
Thanks
Ariel

Readily available bean in PI 7.1 to upload excel file

Hi,
Is there any readily available bean to upload excel file thru File adapter to PI. working on PI7.1 version. Please let me know if any.
Thanks,
Jogula Ramesh

For developing Adapter module for same, please check the links below:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0b39e65-981e-2b10-1c9c-fc3f8e6747fa
http://wiki.sdn.sap.com/wiki/display/stage/AdapterModuleToReadExcelFilewithMultipleRowsandMultiple+Columns

Problem with opening MS Excel files through Portal

Hi All,
I have a user that is complaining about the behaviour of MS Excel files in the Portal. The MS Excel files do not match their behaviour at the windows level. The issue has to do with how MS Excel files never seem to open in a maximized sate when you open them from the portal. The same cannot be said about MS Word files. The behaviour of MS word files is consistent between windows and portal.
Solutions will be REWARDED.
Thanks & Regards,
Krishnen Subramanian.

Hi Hussain,
I hav uploaded the excel file into my KM contentafter that when i try to open it , it does not open as maximized.
Let me explain:
I create a new excel file on my desktop:
I open this file:
I maximize the workbook and save:
I close Excel and then open the file right back up:
I notice that Excel and the workbook open up maximized. I close Excel again.
I now upload the file to the portal:
I then open the file from here:
It is noticed that the Excel is not maximized. We would like for it to behave as it does from the desktop. In other words, if it is saved as maximized, it should open from the portal that way. If it is saved as half way open, it should open that way from the portal.
I have found that MS Word documents behave in the portal as they do on the desktop. I create an MS Word file on my desktop:
There appears to be something portal related that prevents MS Excel files from opening maximized.
Hope you will be abl to solve the message.
Thanks & Regards,
Krishnen Subramanian.

Uploading Excel file in SRM

Hello,
I need to upload excel file in SRM system.
FM ALSM_EXCEL_TO_INTERNAL_TABLE & TEXT_CONVERT_XLS_TO_SAP are not available in this system.
i am able to upload text file (.txt) using following code
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME        = SYST-REPID
* DYNPRO_NUMBER       = SYST-DYNNR
*   FIELD_NAME          = 'P_FILE'
STATIC              = 'X'
MASK                = '.excel , *.xls '
CHANGING
file_name           = p_file
EXCEPTIONS   MASK_TOO_LONG       = 1
OTHERS              = 2          .
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO*
*       WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ld_file = p_file.
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
    filename = ld_file
*    filetype = 'ASC'
*    filetype = 'BIN'
    filetype = 'DAT'
    HAS_FIELD_SEPARATOR           = 'X'
CHANGING
    data_tab = itab[]
EXCEPTIONS
    OTHERS   = 1.
tried with filetype = ASC , BIN & DAT - All r allowing .txt file only.
Please tell me which parameters do i need to provide in order to upload excel file
thanks & regrads,

Hello,
This is a simple example program to get data from an excel file and store it in an internal table.
Try it in this way.
REPORT zexcel_to_itab.
TYPE-POOLS: truxs.
PARAMETERS: p_file TYPE rlgrap-filename.
TYPES: BEGIN OF t_datatab,
      col1(30)    TYPE c,
      col2(30)    TYPE c,
      col3(30)    TYPE c,
      END OF t_datatab.
DATA: it_datatab type standard table of t_datatab,
      wa_datatab type t_datatab.
DATA: it_raw TYPE truxs_t_text_data.
* At selection screen
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      field_name = 'P_FILE'
    IMPORTING
      file_name = p_file.
*START-OF-SELECTION.
START-OF-SELECTION.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
*     I_FIELD_SEPERATOR        =
      i_line_header            = 'X'
      i_tab_raw_data           = it_raw       " WORK TABLE
      i_filename               = p_file
    TABLES
      i_tab_converted_data     = it_datatab[]    "ACTUAL DATA
   EXCEPTIONS
      conversion_failed        = 1
      OTHERS                   = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* END-OF-SELECTION.
END-OF-SELECTION.
LOOP AT it_datatab INTO wa_datatab.
    WRITE:/ wa_datatab-col1,
            wa_datatab-col2,
            wa_datatab-col3.
ENDLOOP.

Upload Excel File from Portal (R/3 working fine)

Similar Messages

Maybe you are looking for