TCP connection closed but a child process of SQL Server may be holding a duplicate of the connection's socket in SQL2008R2

Hello,
I do get the below SQL error in production environment intermittently:
TCP connection closed but a child process of SQL Server may be holding a duplicate of the connection's socket. Consider enabling the TcpAbortiveClose SQL Server registry setting and restarting SQL Server. If the problem persists, contact Technical
Support.
According to the post I search in MSDN, the above error is fixed in SQL2008R-CU6, but I have SQL2008R2-SP02 CU09 patch in production environment and the above error still occurred intermittently. I am running SQL2008R2 SP02 CU09 patch with Windows 2008R2-SP01.
I would like to know if anyone has the same error happened to their SQL environment after applied SQL2008R2-SP02 CU06 patch and later.
Any suggestion would be helpful.
Best regards,
PL.

Hello,
What happen if you apply the changes on the registry explained on the workaround section of the following article?
http://support.microsoft.com/kb/2491214
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Similar Messages

Local SQL Server 2012 (express) ColdFusion 10 Datasource will not connect?

Hello
There are several methods to do this out there, not one has worked for me. First, configuring SQL Server by
enabling TCIP connections
Setting IP1 & IP2 Address to 127.0.0.1
setting all TCP Ports to 1433 (IP1 through IP7)
Leave all TCP Dynamic Ports blank
enable Named Pipes
restart SQL Server
Then in Studio:
Security tab under the DB you want to connect to
create a new user
give user a user name and login name
default Schema- dbo
Then in CF Admin:
Server: 127.0.0.1
Port: 1433
User Name: login name from above
Connection verification failed for data source: appraiseriLOCAL
java.sql.SQLInvalidAuthorizationSpecException: [Macromedia][SQLServer JDBC Driver][SQLServer]Login failed for user 'Nu-PC\Nu'.
The root cause was that: java.sql.SQLInvalidAuthorizationSpecException: [Macromedia][SQLServer JDBC Driver][SQLServer]Login failed for user 'Nu-PC\Nu'.
Any help with this will prevent more hair-pulling.
Thanks

I had the same problem connecting to SQL Server Express 2008 in an Amazon EC2 instance but I followed the instructions step-by-step in the following link and was able to connect with CF.
http://www.linglom.com/it-support/enable-remote-connection-on-sql-server-2008-express/

I tried restoring my iPod, but it told me it was unsuccessful. Now it's stuck at the connect to iTunes screen. I've tried holding the home and lock buttons, just until the unit turns off, and until the unit restarts. What do i do?

I tried restoring my iPod, but it told me it was unsuccessful. Now it's stuck at the connect to iTunes screen. I've tried holding the home and lock buttons, just until the unit turns off, and until the unit restarts. What do i do? iTunes wont even recognize that an iPod is connected.

Try to connect in reocvery mose, explained in this article:
iOS: Unable to update or restore

Connection problem in Crystal Reports for Eclipse(SQL Server Express 2008)

I tried to connect into a local SQL Server Express 2008 database in Crystal Reports for Eclipse (CR4E), but always got the Ping failed message(TCP/IP connection failed) even I tests completed successfully using my Window XP Adminstrators Tools (SQL Server ODBC Data Source Test). I can connect successfully to a remote network Oracle database in CR4E. I would like to know
that is there any one who connect SQL Server Express 2008 local database successfully in CR4E?

Don,
Thanks for your suggestions. I will follow your instruction to connect to SQL Server Express 2008 database latelly. I can connect successfully with different Oracle databases (10g) in CR4E. I will try to connect MySQL database and Postgres database in CR4E to see if they can be successful or not. My project involves international entities with emphsizing in using OPEN SOURCE softwares (which means FREE - no license fees) in .NET platform for Oracle, SQL Server Express, MySQL and Postgres database servers. I am responsible for reports generation. I hope that CR4E can be connected successfully to SQL Server Express 2008 database server, otherwise I have to use JFreeReport/JFreeChart tools to do reports generation .

OGG-00868 SQL Server 2008 has problem with ODBC in the EXTRACT process

Hello Everyone
I want to replicate tables between MS SQLServer 2008 and Oracle 10g
I have Windows XP / MS SQLServer 2008 and Oracle Database 10g R 10.2.0.1.0 running on Red Hat Linux
I followed the steps from the white paper (http://www.oracle.com/technetwork/articles/datawarehouse/oracle-sqlserver-goldengate-460262.html)
and Installed Oracle Golden Gate Version 11.2.1.0.1 (for Linux) and the Version 11.2.1.0.1 32bits (for Windows XP)
I followed all steps of the white paper without problem and I could do the initial load in
the Oracle Database from SQL Server sucessfully.
But when I tried to set and start the Extract process from SQL SERVER
a error was generated in the file c:\gg\dirrpt\MSEXT.rpt and the process is ABENDING
GGSCI > info all
Program     Status      Group       Lag at Chkpt Time Since Chkpt
MANAGER     RUNNING
EXTRACT     STOPPED     MSEXT       00:00:00      03:22:29
2013-08-25 11:59:41 ERROR   OGG-00868 Executing statement for select operation Database error 213 ([Microsoft][SQL Server Native Client 10.0][SQL Server]Column name or number of supplied values does not match table definition.
[Microsoft][SQL Server Native Client 10.0][SQL Server]DBCC execution completed. If DBCC printed error messages, contact your system administrator.
[Microsoft][SQL Server Native Client 10.0][SQL Server]Column name or number of supplied values does not match table definition.
[Microsoft][SQL Server Native Client 10.0][SQL Server]DBCC execution completed. If DBCC printed error messag).
2013-08-25 11:59:41 ERROR   OGG-01668 PROCESS ABENDING.
If somebody has a clue or faced something similar please let me how could solve it.
Thanks
Juan

Hello mb_ogg,
Yes, I had created a Data Source HR Driver= SQL Server (second Tab System DSN) and I also had tried with
the driver SQL Server Native Client 10.0 but I faced the same error.
The database by default is EMP
Below is my configuration
Microsoft SQL Server ODBC Driver Version 03.85.1117
Data Source Name: HR
Data Source Description:
Server: JUAN-XP
Database: EMP
Language: (Default)
Translate Character Data: Yes
Log Long Running Queries: No
Log Driver Statistics: No
Use Integrated Security: Yes
Use Regional Settings: No
Prepared Statements Option: Drop temporary procedures on disconnect
Use Failover Server: No
Use ANSI Quoted Identifiers: Yes
Use ANSI Null, Paddings and Warnings: Yes
Data Encryption: No
I also clicked on the button "Test Data Source" with the below messages:
Microsoft SQL Server ODBC Driver Version 03.85.1117
Running connectivity tests...
Attempting connection
Connection established
Verifying option settings
Disconnecting from server
TESTS COMPLETED SUCCESSFULLY!
Then I went to Database Properties (Right Click) /Oprtion and Recovery model field has Full value
I also made a Backup (Backup Type = Full)
The Backups was made to Disk: C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Backup\EMP.bak
Today I repeated the same steps and I got the same error (I Copied at the end):
I also have the follow question:
Is necessary define the location of the backup of MS SQL Server to say to GG where it can get it?
GSCI (juan-xp) 1> DBLOGIN SOURCEDB HR
2013-08-27 21:16:32 INFO    OGG-03036 Database character set identified as win
dows-1252. Locale: en_US.
2013-08-27 21:16:32 INFO    OGG-03037 Session character set identified as wind
ows-1252.
Successfully logged into database.
GGSCI (juan-xp) 3> ADD TRANDATA HRSCHEMA.EMP
Logging of supplemental log data is enabled for table hrschema.emp
GGSCI (juan-xp) 4> EDIT PARAMS DEFGEN
GGSCI (juan-xp) 5> exit
C:\gg>defgen paramfile c:\gg\dirprm\defgen.prm
      Oracle GoldenGate Table Definition Generator for SQL Server
     Version 11.2.1.0.2 OGGCORE_11.2.1.0.2T3_PLATFORMS_120724.2205
   Windows (optimized), Microsoft SQL Server on Jul 25 2012 03:37:58
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
                    Starting at 2013-08-27 21:18:23
Operating System Version:
Microsoft Windows XP Professional, on x86
Version 5.1 (Build 2600: Service Pack 2)
Process id: 3236
**            Running with the following parameters                  **
defsfile c:\gg\dirdef\emp.def
Source Context :
SourceModule            : [defgen.main]
SourceID                : [defgen/defgen.c]
SourceFunction          : [create_defgen_file]
SourceLine              : [808]
2013-08-27 21:18:23 ERROR   OGG-00037 DEFSFILE file c:\gg\dirdef\emp.def alrea
dy exists.
2013-08-27 21:18:23 ERROR   OGG-01668 PROCESS ABENDING.
C:\gg>defgen paramfile c:\gg\dirprm\defgen.prm
      Oracle GoldenGate Table Definition Generator for SQL Server
     Version 11.2.1.0.2 OGGCORE_11.2.1.0.2T3_PLATFORMS_120724.2205
   Windows (optimized), Microsoft SQL Server on Jul 25 2012 03:37:58
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
                    Starting at 2013-08-27 21:19:03
Operating System Version:
Microsoft Windows XP Professional, on x86
Version 5.1 (Build 2600: Service Pack 2)
Process id: 3312
**            Running with the following parameters                  **
defsfile c:\gg\dirdef\emp.def
sourcedb hr
2013-08-27 21:19:05 INFO    OGG-03036 Database character set identified as win
dows-1252. Locale: en_US.
2013-08-27 21:19:05 INFO    OGG-03037 Session character set identified as wind
ows-1252.
table hrschema.emp;
Retrieving definition for hrschema.emp
Definitions generated for 1 table in c:\gg\dirdef\emp.def
C:\gg>ggsci
Oracle GoldenGate Command Interpreter for SQL Server
Version 11.2.1.0.2 OGGCORE_11.2.1.0.2T3_PLATFORMS_120724.2205
Windows (optimized), Microsoft SQL Server on Jul 25 2012 02:57:42
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
GGSCI (juan-xp) 1> start manager
MGR is already running.
GGSCI (juan-xp) 2> info all
Program     Status      Group       Lag at Chkpt Time Since Chkpt
MANAGER     RUNNING
GGSCI (juan-xp) 3> ADD EXTRACT MSEXT, TRANLOG, BEGIN NOW
EXTRACT added.
GGSCI (juan-xp) 4> ADD RMTTRAIL /u01/app/oracle/gg/dirdat/ms, EXTRACT MSEXT
RMTTRAIL added.
GGSCI (juan-xp) 5> EDIT MSEXT
ERROR: Invalid command.
GGSCI (juan-xp) 6> edit params msext
GGSCI (juan-xp) 7> START EXTRACT MSEXT
Sending START request to MANAGER ('GGSMGR') ...
EXTRACT MSEXT starting
GGSCI (juan-xp) 8> show all
Parameter settings:
SET SUBDIRS    ON
SET DEBUG      OFF
Current directory: C:\gg
Using subdirectories for all process files
Editor: notepad
Reports (.rpt)                 C:\gg\dirrpt
Parameters (.prm)              C:\gg\dirprm
Replicat Checkpoints (.cpr)    C:\gg\dirchk
Extract Checkpoints (.cpe)     C:\gg\dirchk
Process Status (.pcs)          C:\gg\dirpcs
SQL Scripts (.sql)             C:\gg\dirsql
Database Definitions (.def)    C:\gg\dirdef
GGSCI (juan-xp) 9> info all
Program     Status      Group       Lag at Chkpt Time Since Chkpt
MANAGER     RUNNING
EXTRACT     STOPPED     MSEXT       00:00:00      00:02:34
GGSCI (juan-xp) 10> EDIT MSEXT
Report MSEXT.rpt with same error
               Oracle GoldenGate Capture for SQL Server
     Version 11.2.1.0.2 OGGCORE_11.2.1.0.2T3_PLATFORMS_120724.2205
   Windows (optimized), Microsoft SQL Server on Jul 25 2012 03:49:54
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
                    Starting at 2013-08-27 21:30:26
Operating System Version:
Microsoft Windows XP Professional, on x86
Version 5.1 (Build 2600: Service Pack 2)
Process id: 2452
Description:
**            Running with the following parameters                  **
2013-08-27 21:30:26 INFO    OGG-03035 Operating system character set identified as windows-1252. Locale: en_US, LC_ALL:.
EXTRACT MSEXT
SOURCEDB HR
2013-08-27 21:30:28 INFO    OGG-03036 Database character set identified as windows-1252. Locale: en_US.
2013-08-27 21:30:28 INFO    OGG-03037 Session character set identified as windows-1252.
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
RMTHOST OCM, MGRPORT 7809
RMTTRAIL /u01/app/oracle/gg/dirdat/ms
TABLE HRSCHEMA.EMP;
2013-08-27 21:30:28 INFO    OGG-01815 Virtual Memory Facilities for: COM
    anon alloc: MapViewOfFile anon free: UnmapViewOfFile
    file alloc: MapViewOfFile file free: UnmapViewOfFile
    target directories:
    C:\gg\dirtmp.
CACHEMGR virtual memory values (may have been adjusted)
CACHESIZE:                                1G
CACHEPAGEOUTSIZE (normal):                4M
PROCESS VM AVAIL FROM OS (min):        1.57G
CACHESIZEMAX (strict force to disk):   1.41G
Database Version:
Microsoft SQL Server
Version 10.00.1442
ODBC Version 03.52.0000
Driver Information:
SQLSRV32.DLL
Version 03.85.1117
ODBC Version 03.52
Source Context :
SourceModule            : [ggvam.param]
SourceID                : [../gglib/ggvam/cvamparams.cpp]
SourceFunction          : [com_goldengate_vam::validateIfSqlServer]
SourceLine              : [1955]
2013-08-27 21:30:28 ERROR   OGG-00868 Executing statement for select operation Database error 213 ([Microsoft][ODBC SQL Server Driver][SQL Server]Column name or number of supplied values does not match table definition.
[Microsoft][ODBC SQL Server Driver][SQL Server]DBCC execution completed. If DBCC printed error messages, contact your system administrator.
[Microsoft][ODBC SQL Server Driver][SQL Server]Column name or number of supplied values does not match table definition.
[Microsoft][ODBC SQL Server Driver][SQL Server]DBCC execution completed. If DBCC printed error messages, contact your system admi).
2013-08-27 21:30:28 ERROR   OGG-01668 PROCESS ABENDING.
Thanks
Juan

Flat file connection: The file name "\server\share\path\file.txt" specified in the connection was not valid

I'm trying to execute a SSIS package via SQL agent with a flat file source - however it fails with Code: 0xC001401E The file name "\server\share\path\file.txt" specified in the connection was not valid.
It appears that the problem is with the rights of the user that's running the package (it's a proxy account). If I use a higher-privelege account (domain admin) to run the package it completes successfully. But this is not a long-term solution, and I can't
see a reason why the user doesn't have rights to the file. The effective permissions of the file and parent folder both give the user full control. The user has full control over the share as well. The user can access the file (copy, etc) outside the SSIS
package.
Running the package manually via DTExec gives me the same error - I've tried 32 and 64bit versions with the same result. But running as a domain admin works correctly every time.
I feel like I've been beating my head against a brick wall on this one... Is there some sort of magic permissions, file or otherwise, that are required to use a flat file target in an SSIS package?

Hi Rossco150,
I have tried to reproduce the issue in my test environment (Windows Server 2012 R2 + SQL Server 2008 R2), however, everything goes well with the permission settings as you mentioned. In my test, the permissions of the folders are set as follows:
\\ServerName\Temp --- Read
\\ServerName\Temp\Source --- No access
\\ServerName\Temp\Source\Flat Files --- Full control
I suspect that your permission settings on the folders are not absolutely as you said above. Could you double check the permission settings on each level of the folder hierarchy? In addition, check the “Execute as user” information from job history to make
sure the job was running in the proxy security context indeed. Which version of SSIS are you using? If possible, I suggest that you install the latest Service Pack for you SQL Server or even install the latest CU patch.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

DB Connect from BW on Oracle to MS SQL Server 2005

Hello,
I am having issues replicating Meta-Data from SQL server databases via DBCONNECT to SAP BW.
For instance we have the CCM DB and the Siebel DB. We can transfer meta-data from CCM with no problem (SQL Server 2000) but we cannot transfer meta-data from Siebel (SQL Server2005).
Our SAP BW is system is on an Oracle database.
CCM is on OS Win 2003. SQL 2000 SP4.
Siebel is on Win 2003 Server Enterprise 5.2 and SQL Server 2005 SP2.
I already have the dbsl for SQL server installed in the BW system. When I do a Connection Check of the source systems in RSA1, it says "Source system connection OK".
Any help will be highly appreciated.
Thanks,
Ajay

Hi,
I don't think the 32 vs. 64 bit is the issue. Have you tried checking OSS note: 512739. It describes the prerequisites for accessing MS SQLServer via DB Connect. Normally problems occurs due to unsupported data types being used in SQLServer - in such cases you have to create views in the source system and then use these views instead of the actual database tables. In the view you can perform the necessary data type conversion.
Hth,
Jacob

I can't link to an I series (IBM AS400) server from my sql server 2014 server (64 bit) -- but yes can link on sql server 2005 (32 bit)

I have an I series (IBM AS400) server linked "OK" to a sql 2005 sql server (32 big). I copied the link script (but changed credentials) from the sql server 2005 link and attempted to run it in the sql server 2014 server (on win 7 64
bit). There are no complaints from SSMS when I run the script, but when I try to query a table I get this error message:
OLE DB provider "MSDASQL" for linked server "CWMPDTA" returned message "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed".
OLE DB provider "MSDASQL" for linked server "CWMPDTA" returned message "[IBM][System i Access ODBC Driver]Key value in connection string too long.".
Msg 7303, Level 16, State 1, Line 11
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "CWMPDTA".
Here is the script (from the sql server 2005 (32 bit)) I ran on the sql server 2014 SSMS -- is there anything I need to change? How can I get this I series server to link to my sql server 2014 server?
USE [master]
GO
/****** Object: LinkedServer [CWMPDTA] Script Date: 9/25/2014 10:39:12 AM ******/
EXEC master.dbo.sp_addlinkedserver @server = N'CWMPDTA', @srvproduct=N'cwmpdta', @provider=N'MSDASQL', @datasrc=N'iseries2', @provstr=N'Provider=IBMDA400.DataSource.1;Password=myPwrd;Persist Security Info=True;User ID=myID;Data Source=10.0.0.51;Initial Catalog=T9S', @catalog=N'T9S'
/* For security reasons the linked server remote logins password is changed with ######## */
EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname=N'CWMPDTA',@useself=N'False',@locallogin=NULL,@rmtuser=N'myID',@rmtpassword='myPwrd'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'collation compatible', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'data access', @optvalue=N'true'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'dist', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'pub', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'rpc', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'rpc out', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'sub', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'connect timeout', @optvalue=N'0'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'collation name', @optvalue=null
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'lazy schema validation', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'query timeout', @optvalue=N'0'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'use remote collation', @optvalue=N'true'
GO
Rich P

Thank you for this reply. I went to the link and selected the option for DB2s and ran the install. Then I started up SSMS. I copied the same script as above, and it executed successfully. But when I try to run a query against
a table in a database on this linked sever -- I get this error message:
OLE DB provider "MSDASQL" for linked server "CWMPDTA" returned message "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed".
OLE DB provider "MSDASQL" for linked server "CWMPDTA" returned message "[IBM][System i Access ODBC Driver]Key value in connection string too long.".
Msg 7303, Level 16, State 1, Line 8
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "CWMPDTA".
Do I need to change the line containing -- @provider=N'MSDASQL', maybe?
this is the query I'm running:
select TOP 10 * from CWMPDTA.T9S.CWMPDTA.INSKU
The same exact query runs fine on the sql server 2005 linked server. Is there something I need to configure?
Rich P

SSIS: To run a SSIS package outside of SQL Server Data Tools you must install SCR - DP1 Connections of Integration Services or higher

We have SSIS installed on a machine that is not part of a cluster but it is accessible by the cluster.
Our job we have running on the cluster is failing with the following error:
Error: 2014-01-31 09:14:37.52 Code: 0xC000F427 Source: SCR - DP1 Connections
Description: To run a SSIS package outside of SQL Server Data Tools you must install SCR - DP1 Connections of Integration Services or higher. End Error
Any advice or information on how to resolve this would be great.
Many Thanks.

Hi NessaBella,
Integration Services service is not a cluster-aware service, and does not support failover from one cluster node to another. Therefore, in a clustered environment, Integration Services should be installed and started as a stand-alone service on each node
in the cluster.
Based on the error message, it seems that SSIS is not installed on the cluster node on which the job was running. Although SSIS is installed on a machine that is not part of the cluster and can be accessed by each cluster node, the SSIS service installed
on a remote server cannot be used a cluster node. So, please install the shared feature SQL Server Integration Services on each cluster node. Besides, if certain packages need to run in 32-bit mode in certain jobs and the SQL Server installed is 64-bit version,
you also need to install BIDS/SSDT on the cluster node to get the 32-bit runtime of SSIS.
References:
Integration Services (SSIS) in a Cluster
Loading and Running a Remote Package Programmatically
Regards,
Mike Yin
TechNet Community Support

Connecting BO universes with SAP on a SQL server database

Hello,
The aim is to make a secured connection between a BusinessObjects universe and an SAP system that runs on a SQL server database.
We will have in the nearby future 1 SAP system for several customers (SAP in the clouds). For those customers we want to maintain their BusinessObjects connection with the SAP system as it is for the moment. This means that the customers who are working with their current BO system (5.1.6) connect for the moment between BusinessObjects and their local SAP system via the universe connection (Oracle driver and user). These customers should connect in the nearby future to a central SAP system and only be able to see the data of their own company (based on a client number). Iu2019m wondering if we could use the SAP-authorisation mechanism in order to do so. This would mean that we define an SAP user in SAP and that we define the same user in BusinessObjects and that there is a layer in between (cfr. The sap java connector) that allows a secure connection for a client to only its specific data (based on client number f.i.)
Can you tell me if there exists already a solution for this for BO 5.1.6 or what is the pre-requisite in order to do so. I know that the Best Practices of SAP-Bo use already this kind of mechanism but then we talk about BO XI 3.0 and ECC 6.0 linked via a Java Connector. Does there already exists something like that for the connection between an SAP system (on a SQL server database) and a BusinessObjects 5.1.6 system.
Thanks in advance for your answer.
Thierry Renaer

Hello,
Thank you for your reply. And what about BO XI 3.0? What should we be using?
Ik have been using the SAP Java Connector but I'm wondering if there exists more user friendly (read easily adaptable) tools in order to provide a secure connection between SAP BO XI 3.0 and SAP ECC.
Many regards
Thierry Renaer

I am unintentionally come to delete the bluetooth connection to my heart rate monitor in my iPhone 4s. How can I restore the connection?

I am unintentionally come to delete the bluetooth connection to my heart rate monitor in my iPhone 4s. How can I restore the connection?

Thanks, but unfortunately for me the Polar H7 does not have any buttons or anything that can actively affect the pairing, it is manifest just a transmitter. Pairing can apparently only be done by finding the Polar H7 in the unit that you want to pair with (my 4s) and after my delete of the device, my iPhone 4s does not retrieve it as a Bluetooth device.

Connecting to SQl server ( MS acess front end) and pull the data into BI

Dear all,
i need to extract the data from SQl server ( MS acess front end) and pull the data into BI .
i need to know what are the steps need to follow on this..
can any one help me on this...!
Thanks,
Siva

Hi,
1. login to sql server u2013 with ur server credentials and connect.
2. select ur sql for ex: sap bw
3. Right click u2013 sapbw - task - export data From sql to excel I m exporting So give sql details
4. Destination u2013 select excel.. and browse where u want to save the fileu2026
5. give next
6. select from which table u want to export
7. click on next
8. click on finish
9. close
10. go to desktop and open the xyz.xls file
11. not make it as csv file and load the data to BI as a flat file
Hope it will help you.
Regards,

How to connect captivate file in a database (MS SQL SERVER 2008)

Hi...
How to connect captivate file in a database (MS SQL SERVER 2008) ???
Kindly response please..
thanks!!!

Hi there
See if the link below helps you out.
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Connecting BI 7.0 SR2 with MS SQL Server 2005

Dear SAP Gurus,
We have a scenario to connect an External Database MS SQL Server 2005 with BI 70 SR2 Server.
The platform details are as follows :-
BI 7.0 SR2
Oracle 10.0.2.8 Database
AIX 5.3
When we were on an older platform BW 3.5 we had installed an Windows Application Server for connecting to SQL Server.
I was told that in the latest system BI 7.0 it is possible to connect to SQL Server via AIX.
Now when i raised a message to SAP , they tell me that it is necesary to have an Windows Application Server.
If any one has connected an BI 7.0 on AIX to MS SQL Server 2005 , Please let me know.
Regards,
Ashish .A. Poojary

Hello Ashish,
U can connect BI 7 to SQL using UD Connect even they are running on different operating system.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c0d70315-958f-2a10-bc88-eb91e36f4037
Regards,
Sachinkumar

I just bought an ipod touch 4th gen and cant connect it to tunes i have registered it and downloaded latest itunes it wont pass the connect to itunes screen

i just bought an ipod touch 4th gen and cant connect it to tunes i have registered it and downloaded latest itunes it wont pass the connect to itunes screen

Hi..
Try this support article > Can't connect to the iTunes Store

TCP connection closed but a child process of SQL Server may be holding a duplicate of the connection's socket in SQL2008R2

Similar Messages

Maybe you are looking for