TDS upgrade utility error

We have updated the SAP from 2007 to SAP 8.8. I got the TDS template sheet from SAP and i filled the same but whenever i am running the file through TDS utility run. It is checking the data and it is giving me error message that u201CCannot perform '=' operation on System.Double and System.String."
Please do the needful.
Regards,
Sarfraz

i got the solution from SAP they made some changes in the sheet.

Similar Messages

Error - TDS (TDS Upgrade Utility)

Hi All,
While running TDS Upgrade Utility following error had been occur
1) Outgoing Payments TDS] Primary Key not exist in DB: row.657
2)Withholding Tax Rates] Primary Key not exist in DB: row.2
3)[Outgoing Payments TDS Amounts] Value in excel should equal to value in DataBase : row.2675 col.Deposit Amount (SC)
Let me know some one face the same issue and get solved.
Regards
Anish

Hi,
Your list of error confirms that the excel which you have prepared to import using the TDS Upgrade Utility does not seem to ba complete (i.e Missing data) or all the sheets are not having data.
Please check the Excel sheet again for the data and also prepare it based on the documentation.
Kind Regards,
Jitin
SAP Business One Forum Team

"Failed to load excel file" an Error Message while running TDS upgrade util

Dear All,
"Failed to load excel file" an Error Message while running TDS upgrade utility when clicking on CHECK DATA.
Please help me out on this!!!!!!!!!!!!
Thanks..........

Not all data can be exported to Excel easily. Especially if the query result is huge or there are special characters in the query results. You may try the most updated version.
Thanks,
Gordon

Date Format in TDS Upgrade Utility Import

Hi
Could any know the exact date format in TDS Upgrade Utility in excel file. I tried with various formats like 01/04/2008, 20080401
Its getting error: String was not recognized as valid Date Time. And also if you know any suggestions and solution regarding utility upgrade. please tel me.
Thanks and Regards,
Sudhir B.

Hi Sudhir,
Try: 2012-01-01 to see.
Thanks,
Gordon

TDS Upgrade Utility

Hi
I upgraded an DB 2007B to 8.81 PL 08.
Now i'm doing TDS upgrading by utility tool. My excel format for financial year master is
Absolute ID U_TDSFINCD U_TDSFINDC U_TDSFMDT U_TDSTODT U_TDSASEYR
when i click check data in that tool. i'm getting the error: Fail to Load Excel File
when i click UpgradeDB. I'm gettig the error message : In order to perform upgrade, database needs a backup. Upgrade failed.
I'm doing this in upgraded DB 8.8 PL 08. whether its correct. And what are all the other procedure for upgrading TDS which was not mentioned on the document. If any one upgraded TDS form 2007B means please give me an solution and suggestions.
Thanks and Regards,
Sudhir B.

Problem Solved.
There is an default excel file format in the TDS upgrading utility help file.

TDS Upgarde Utility Error!

Hi,
While performing TDS upgrade from the excel sheet using TDS upgrade utility, system is performing the check (checking operation) and system give "Cannot perform '=' operation on System.Double and System.String."
Please reply ASAP.
Thanks.......

Hi,
Please revisit your excel sheet again as from the error it seems that some column in the Exchel sheet is not as per the guidelines which are mentioned in the help file for the TDS Utility.
Like Sections sheet has a column which is also linked in another sheet where section column is there. Check for columns having specific number or characters and entered more than specified.
Check such things as prepare the sheet as mentioned in the Guidelines.
Kind Regards,
Jitin
SAP Business One Forum Team

TDS Upgrade Giving Error.

Hi,
While performing TDS upgrade from the excel sheet using TDS upgrade utility, system is performing the check (checking operation) and system give "Cannot perform '=' operation on System.Double and System.String."
Please reply ASAP.
Thanks,
Tushar Nathwani

Hi tushar,
Chevk that you are following the steps mentioned in upgrade utility guide.
If problem still there,contact citixys.
Contact harish kumar: harish.kumar @ citixsys.com
Thanks,
Neetu

Tax Deduction at Source Upgrade Utility

Dear All,
Has anyone used The Tax Deduction at Source Upgrade Utility which offers customers in India the ability to upgrade the with-holding tax data created by TDS add-on to SAP Business One 8.8
I tried executing the utility, but gives an error "Unable to read Excel File". Is it mandatory to fill up all 29 sheets in the excel template provided or we can upload each sheet separately?
Kindly assist.
Thanks and Regards,
Pritesh Shah

Dear,
Check the below link
http://www.sdn.sap.com/irj/sdn/index?rid=/library/uuid/108fc2b8-fc8e-2c10-cd84-ae04ee061e24
and check the manual of using TDS utility.
Hope this will help you.
Thanks,
Neetu

Unable to proceed with upgrade utility while upgrading from 10g to 11g

We have installed Weblogic server,configured the domain also performed the schema creation using the RCU and Installaed OBIEE 11.1.1.6.
But while running the the upgrade assistance utility facing the following error:
UPGCMP-02712: Expected oracle.biee.admin:type=BIDomain.BIInstance.ServerConfiguration,* Oracle instance, found 0
Indicating no Oracle instance is found.
Full log file details from upgrade utility log:
ua2013-04-12-17-17-11PM.log
========
[2013-04-12T17:21:01.451-04:00] [BIEE] [TRACE] [] [upgrade.BIEE] [tid: 11] [ecid: 0000Js07Sxp2fLMYEL3FFS1HQ7bN000002,0] Plug in Name : BIEE
[2013-04-12T17:21:01.451-04:00] [BIEE] [TRACE] [] [upgrade.BIEE] [tid: 11] [ecid: 0000Js07Sxp2fLMYEL3FFS1HQ7bN000002,0] Display Name : Oracle Business Intelligence Enterprise Edition
[2013-04-12T17:21:01.451-04:00] [BIEE] [TRACE] [] [upgrade.BIEE] [tid: 11] [ecid: 0000Js07Sxp2fLMYEL3FFS1HQ7bN000002,0] Checking string translations
[2013-04-12T17:21:01.451-04:00] [BIEE] [TRACE] [] [upgrade.BIEE] [tid: 11] [ecid: 0000Js07Sxp2fLMYEL3FFS1HQ7bN000002,0] String translation check finished
[2013-04-12T17:21:01.466-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Starting to examine components.
[2013-04-12T17:21:01.466-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Starting to examine BIEE.
[2013-04-12T17:21:01.482-04:00] [BIEE] [TRACE] [] [upgrade.BIEE] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] MBean connection made : service:jmx:t3://localhost:7001/jndi/weblogic.management.mbeanservers.domainruntime
[2013-04-12T17:21:01.482-04:00] [BIEE] [TRACE] [] [upgrade.BIEE] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] RPD = D:\SampleSales\samplesales.rpd
[2013-04-12T17:21:01.482-04:00] [Framework] [ERROR] [UPGAST-00138] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] upgrade exception occurred
[2013-04-12T17:21:01.482-04:00] [Framework] [ERROR] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Cause: An unexpected upgrade exception has occurred. Action: See the secondary error message for additional details.
[2013-04-12T17:21:01.482-04:00] [Framework] [ERROR] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] UPGCMP-02712: Expected oracle.biee.admin:type=BIDomain.BIInstance.ServerConfiguration,* Oracle instance, found 0
[2013-04-12T17:21:01.482-04:00] [Framework] [ERROR] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] UPGCMP-02712: Expected oracle.biee.admin:type=BIDomain.BIInstance.ServerConfiguration,* Oracle instance, found 0
[2013-04-12T17:21:01.482-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Finished examining BIEE with status: Failure.
[2013-04-12T17:21:01.482-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Finished examining components.
[2013-04-12T17:21:01.482-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Starting to list upgradeable items.
[2013-04-12T17:21:01.482-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Component name: Oracle Business Intelligence Enterprise Edition
[2013-04-12T17:21:01.482-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] No upgrade items found
[2013-04-12T17:21:01.482-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Finished listing upgradeable items.
[2013-04-12T17:22:14.546-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 11] [ecid: 0000Js07Sxp2fLMYEL3FFS1HQ7bN000002,0] Upgrade was canceled by the user.
===================
Topology.xml file details:
============
<?xml version='1.0' encoding='UTF-8'?>
<topology xmlns='http://www.oracle.com/fmw-nonj2ee-topology'>
<ias-instance id="instance2" oracle-home="D:\OBIEE_Middlewarehome\Oracle_BI1" instancehome="
D:\OBIEE_Middlewarehome\instances\instance2" host="PEPWAP06411.corp.pep.pvt" port="9501">
<ias-component id="coreapplication_obijh1" type="OracleBIJavaHostComponent">
<em-properties>
<property name="EMTargetType" value="oracle_bi_java_host"/>
<property name="originalAllocatedPort" value="9810"/>
</em-properties>
</ias-component>
<ias-component id="coreapplication_obisch1" type="OracleBISchedulerComponent">
<em-properties>
<property name="originalAllocatedMonitorPort" value="9708"/>
<property name="originalAllocatedScriptRPCPort" value="9707"/>
<property name="EMTargetType" value="oracle_bi_scheduler"/>
<property name="originalAllocatedPort" value="9705"/>
</em-properties>
</ias-component>
<ias-component id="coreapplication_obis1" type="OracleBIServerComponent">
<em-properties>
<property name="originalAllocatedMonitorPort" value="9701"/>
<property name="EMTargetType" value="oracle_bi_server"/>
<property name="originalAllocatedPort" value="9703"/>
</em-properties>
</ias-component>
<ias-component id="coreapplication_obips1" type="OracleBIPresentationServicesComponent">
<em-properties>
<property name="EMTargetType" value="oracle_bi_presentation_services"/>
<property name="originalAllocatedPort" value="9710"/>
</em-properties>
</ias-component>
<ias-component id="coreapplication_obiccs1" type="OracleBIClusterControllerComponent">
<em-properties>
<property name="originalAllocatedMonitorPort" value="9700"/>
<property name="EMTargetType" value="oracle_bi_cluster_controller"/>
<property name="originalAllocatedPort" value="9706"/>
</em-properties>
</ias-component>
</ias-instance>
</topology>
================
Please help.
Thank you.
Regards,
MAK
Edited by: 1000104 on Apr 15, 2013 7:42 AM

There's a dedicated Web logic forum (WebLogic Portal where you might get better assistance. As i can't move your thread, please close this one and post your issue again in the web logic forum.
Thanks,
Klaus

TDS Upgrade Issue

Hi All,
While upgrading TDS am facing the issue as mentioned below.
A/P Invoice WTAX
Total Rate is not Right.
But i Run as per SAP Query
below the details
Total Rate 2, TDS Rate 2, Surcharge Rate 10,Cess 2, Hsc 1
if any one have update query for the same send it to me.
OR update me the way to calculate Total Rate??
Regards
Anish
Edited by: Anishsamvel A on Nov 22, 2011 9:38 AM

Hi,
Then you need to concentrate on the AP Invoice Wtaxes and specifically the tax rate.
Please check Page 18 of the TDS Upgrade Manual by doing F1 help on the TDS Utility Tool and check how the total rate calculation is mentioned and confirm whether you have performed the rate determination the same way otr not.
Kind Regards,
Jitin
SAP Business One Forum Team

MAIL: The upgrade failed - error occurred during upgrade. launching Mail Import assistant to repair damaged index did not work

After installing Yosemite, the Mail required an upgrade. the upgrade was completed but resulted in a message: The upgrade failed. error occurred during the upgrade, check continue to launch Mail Import Assistant.
This resulted in an instruction: Your mail index has been damaged. To repair it quit mail. Mail will repair index next time you open mail.
Following this instruction resulted in the same failure message being repeated continuously.
How do I proceed to upgrade the Mail app.?

If doing as the alert directs (relaunching Mail) has no effect, see below.
The new version of Mail stores its database in a different format than the old one, so the database has to be converted before Mail can use it. Sometimes the conversion fails because the old database is corrupt. The easy way to recover is to discard the old database and start afresh. You can do that without losing any messages, provided that:
☞ All your incoming mail accounts are on an IMAP or Exchange server
☞ You store sent messages on the server
☞ You don't have any "On My Mac" mailboxes
Most well-known independent mail services such as iCloud and Gmail are based on IMAP. On the other hand, ISP-hosted mail services almost always use POP. If your ISP is one of your mail service providers (or the only one), you probably can't use this procedure. Ask for further instructions in that case.
If you know that the conditions above are satisfied, continue as follows.
Quit Mail if it's running. Back up all data.
Open the Library folder in your home folder by holding down the option key and selecting
Go ▹ Library
from the Finder menu bar. Inside it is a subfolder named "Mail." Move that folder to the Desktop. You're not moving the Mail application; you're moving a folder named "Mail."
Open the Internet Accounts pane in System Preferences and recreate your mail accounts other than iCloud with the same settings as before. To recreate an iCloud mail account, all you have to do is open the iCloud preference pane and check the box marked Mail.
Launch Mail. If all goes well, your mailboxes should be restored automatically. The messages will be downloaded from the servers, so it may take a long time if you have very large mailboxes. Some people have mailboxes in the gigabyte range, and that may be a problem if your bandwidth usage is metered.
If the mailboxes are created successfully, you can delete the folder you moved to the Desktop. You may have to recreate your Mail rules, signatures, and custom stationery. If it's very important to you not to have to do all that, ask for instructions before deleting the folder.

I just upgraded to Yosemite. Iphoto is now broken. Upon upgrade receiving error "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."

I just upgraded to Yosemite. Iphoto is now broken. Upon upgrade receiving error "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."

Perform the following, stopping with the first one which works:
1. Open the Mac App Store's Purchases tab. If you're prompted to accept iPhoto into your Apple ID, do so.
2. Move it out of the Applications folder(it may need to be put into the Trash temporarily), and then see if you can download it for free from its individual product page.
3. Click here and contact Apple.
(116137)

Forms upgrade utility

Forms 9i has an upgrade utility to upgrade from forms 6i, does it work in 10G also? if not is there something in 10G which can do this?
Anil

Anil,
should work with Forms 10g as well.
Frank

Disk Utility Error: The underlying task reported failure on exit 1

    #!/bin/bash
      # Author : Bill Hernandez
    # Location : Plano, Texas
    # Updated : Saturday, June 6, 2009 (1:48 PM)
    # script name : setdisk_ownerenabled
    # make sure to set permissions to execute
    <hr>
    # Description :
    <hr>
    # I've noticed that sometimes when using disk utility I cannot repair permissions, or I might get :
    # ERROR: The underlying task reported failure on exit 1
    # This shell script seems to have solved the problem.
    # It worked very well for me,
    # IF YOU USE THIS SCRIPT, IT IS AT YOUR OWN RISK...
    # DO NOT USE IT UNLESS YOU UNDERSTAND WHAT IT DOES
    # After running it, it is best to restart before using Disk Utility again
    <hr>
    # Details :
    <hr>
    # After partitioning a disk using "Disk Utility", and then begin using it, at some point I would get
    # an arror message when trying to save to one of the partitions, yet when I looked at the permissions
    # everything looked fine. I would then try to use Disk Utility to repair permissions and end up with a
    # cryptic error that pretty much told me nothing.
    # I noticed that while in Disk Utility, if I selected a partition the lower LH corner of the dialog
    # showed : Owners Enabled : No
    # I tried selecting the partitions at the Desktop and doing a (CMD-I) and at the very bottom of each
    # info dialog there was a checkbox :
    # [ ] ignore ownership of this volume
    # which I would check, even after logging in as root, and I couldn't seem to get a consistent way
    # to get rid of the permissions dialog failure, so I found the vsdbutil command which can be used
    # as follows to get partition, or disk info :
    # $ vsdbutil -c /Volumes/driveor_partitionname
    # ----> Permissions on '/Volumes/driveor_partitionname' are enabled.
    # if it is not enabled you can enable the disk or partition using :
    # $ vsdbutil -a /Volumes/driveor_partitionname
    # It will set "Owners Enabled : Yes"
    # This below script loops through the mounted disks, partitions, etc. and gives you information.
    # You can leave the three flags below all set to TRUE, or selectively use what you want and change
    # the rest to false...
    <hr>
    # CHOOSE {"TRUE", "FALSE"}
    <hr>
    getvolumestatus="TRUE"         # get "Owners Enabled : (Yes|No)" status
    setvolumestatus="TRUE"         # set "Owners Enabled : Yes"
    list_volumes="TRUE"                   # show volume names
    <hr>
    # DO NOT CHANGE ANYTHING BELOW HERE
    <hr>
    if [ $getvolumestatus == "TRUE" ]; then
     echo '============================='
     echo '$getvolumestatus'
     echo '============================='
     # get "Owners Enabled : (Yes|No)" status
     for i in $( df -l | sort -u | awk '{print $6}' | grep '/' ); do
     vsdbutil -c $i
     done
    fi
    <hr>
    if [ $setvolumestatus == "TRUE" ]; then
     echo '============================='
     echo '$setvolumestatus'
     echo '============================='
     sudo echo -n
     # set "Owners Enabled : Yes"
     for i in $( df -l | sort -u | awk '{print $6}' | grep '/' ); do
     sudo vsdbutil -a "$i"
     echo "setting Owners Enabled : Yes for ---> $i"
     done
    fi
    <hr>
    if [ $list_volumes == "TRUE" ]; then
     echo '============================='
     echo '$list_volumes'
     echo '============================='
     for i in $( df -l | sort -u | awk '{print $6}' | grep '/' ); do
     echo $i
     done
    fi
    <hr>


As it turns out, this didn't completely solve the problem, it solved part of the problem.
Here is a summary to the root cause of the problem.
SUCCESS...
Problem Summary : The system crashed and would hangup during boot, tried many things, until I eventually erased the disk and started over again.
iMacG5 24 GHZ Intel with One internal disk partitioned into 3 logical drives
Cub_1 OS X 10.5.7
Cub_2 OS X 10.5.7 (Carbon Copy Cloner backup of Cub_1)
Cub_3 OS X Server 10.5.7 (standard os x server setup)
At some point after setting up standard preferences, OS X Server crashed.
When I tried to restart, the machine would hang up during boot.
Finally after several attempts, ran Disk Utility from install dvd and repaired Cub_3
When I tried to run "Repair Permissions" on Cub_3 from install dvd, I got an error
Disk Utility Error: The underlying task reported failure on exit 1.
Rebooted, and started in single user mode (CMD-S) during boot until I saw the unix commands on the screen
RAN : root # fsck -fy
Then I began seeing the same command filling the screen :
posix_spawnp("/usr/sbin/mDNSResponder") could not find file or directory
Called Enterprise Support and spoke to Frank Alcorn, he said this was most likely a permissions problem and asked me to try repairing permissions from the install dvd. I told him about the error, but nevertheless I tried it again and got the same Disk Utility Error: The underlying task reported failure on exit 1..
He asked me to try booting into single user mode again, and to try
root # chmod 775 /
root # reboot
During the reboot process the machine got hung up again, and could not get the single user mode to work at all.
Frank said the command needed to be :
root # chmod 1775 /
Frank asked me if I had changed anything in file sharing, and I told him I had. He asked me what I had shared, and I said the entire drive Cub_3. He asked me what I had done for permissions, if I had denied permissions to anyone. I told him that I had set myself up as the only user that could have access to it, and when he said that's where the problem was the lightbulb went off, and it made sense.
Shortly after I set the sharing preferences is when the server crashed. It all makes sense now...
Frank said not to share the entire disk, only portions (share points) of it. I had done this in Panther Server, and Tiger Server and it worked fine, but apparently Leopard Server works a little differently, maybe more secure.
It seems to me that if sharing the entire disk, which is what I needed would cause such a problem there should have been some sort of warning from the operating system, but there wasn't. I had run into this problem several times over the past three weeks since I had started working with Leopard Server, but in each case I ended up re-installing OS X Server and starting over again.
I told him I would try to reboot from the OS X partition (Cub_1) and try it from there.
He asked me to let him know if it worked, and I said I would...
Problem FIX :
I booted back into the partition containing OS X (Cub_1) and did the following via the Terminal.
$ su - root
$ chmod 1775 /
$ reboot
During the reboot process I held down the (OPTION) key, and selected Cub_3 (the os x server partition) and sure enough after a few minutes of holding my breath the login window magically appeared. So I logged in, and did not have to re-install the server. Hallellujah....
This solved the boot hang problem. It is great to finally have an answer. In retrospect it makes sense, but that's why its hindsight...
The reason for sharing the entire disk in my mind was that since I was the only user on the system, it was easier to have one disk mounted on my workstation rather than several folders. It made sense to me, it still does. I don't need a bunch of folders, just one disk is easier...

Utility error

Hello,
I recently changed to Yosemite and since then I have a funny situation, which is bugging me.
Every 20 minutes on the dot a window pops up from the console with the message "Utility error" In the box is a cloud visible with a zipped up zipper. When I open up the console the information for this incident says
Facility                    org.pythonmac.unspecified.Utility
CFLog Thread        1307
GID                         20
Host                         name.fritz.box
Level                       4
ReadUID                 501
Sender                    Utility
Message                 Utility Error
I have no idea, what that means and how to get rid of it.
Can somebody help please.
best regards
Mark Riccius

You can find which application threw this error from activity monitor. In my case it was an application called ZipCloud. After I trashed it, the error popup has gone away.

TDS upgrade utility error

Similar Messages

Maybe you are looking for