Technical Upgrade of the system from R/3 4.6 to ECC 6.0

Hi all i have a query regaring system upgrade:
Currently i have 2 systems R/3 4.6: Development(D1), Quality(Q1).
Now this systems needs to be upgraded to ECC 6.0.
First the D1 is going to be copied to a new development(D2).
Then D2 will be upgraded to ECC 6.0.
Here a unicode check and other required modification (code compatibility) to
all the customizing and workbench objects is to be done.
Now a copy of Q1 is to be done in new Quality(Q2).
My requirement is to determine all the transported requests from D1 to Q1 and
then transport the same from D2 to Q2 so that the unidcode complaint objects are transported and they overwrite in the new quality system.
Is this process feasible? If yes, How?
If anyone has worked on technical upgrade project, please suggest?
If any other information is required pls mention.

hi.
it sounds quite complicate for me...
you do not need to upgrade D2 to ECC 6.0 to be able to do the unicode checks. when you go to transaction se38 and select the report Z* you will find something like "unicode checks active" in the properties. if you enable them and check the reports you will find the problems regarding unicode...
i think there is another problem too. what are you doing with the unicode-enabled transports on system D2? you transport them to Q2 and what else? Are you transporting them to D1 too? If yes it is possible that you will overwrite the originals on D1 (it depends on your settings on system D2).
hope my answer helps...
regards,
martin

Similar Messages

Upgrading/Migrating Portal System from EP 6.40 SP21 to EP 7.0 SP2

Upgrading/Migrating Portal System from EP 6.40 SP21 to EP 7.0 SP2
IN EP 6.40 we have ESS/MSS 60.2.2,KM,NWDI ,IN BAck end we have ECC 6.0 .
COuld you let me what are the list of measures/Prerequisites i need to take before going for upgrade .

Hi,
You can upgrade your portal with all usages that you have installed. You need to check upgrade guide as well.
You need to check if there is any custom development on the portal to migrate it to new version.
Thanks
Sunny

My ibook g4 won't start anymor from the harddisk. so I tried to reinstall the system from the orginial system cd. Doesn't work. It says the system cd is damaged. What should I do?

my ibook g4 won't start anymor from the harddisk. so I tried to reinstall the system from the orginial system cd. Doesn't work. It says the system cd is damaged. What should I do?

I would question that error message if the Mac OS X 10.5 DVD doesn't work, either.
What error message(s) did you get with the Mac OS X 10.5 DVD? Is the Mac OS X 10.5 DVD the full retail install DVD, an upgrade DVD, or a DVD that came with another Mac?

Windows 7 "a patch is preventing the system from starting" error code 0x490

I have a Windows 7 machine.
It was working fine.
Now it will not boot.
When I try system repair, it says:
Root cause found
A patch is preventing the system from starting.
Repair action: System file integrity cheack and repair
Result: Failed. Error code 0x490
I have tried doing safe mode, last known good configuration etc and nothing works
Also, I tried to restore to an early checkpoint, but it claims that none exist, even thought I know we save restore points.
Please advise?

"I suggest running Command Prompt from the repair menu and then Check Disk:
1. Insert the Windows 7 Disc and boot from it.
2. In the recovery menu, choose Command Prompt .
3. Type the following command and press Enter:
Chkdsk /r /f
Please also try the following commands and press Enter at the end of each line:
Ren C:\Windows\winsxs\pending.xml pending.old
Ren C:\windows\SoftwareDistribution SDOLD
Regedit.exe
When the register editor opens, please navigate to the following key:
HKEY_LOCAL_MACHINE\COMPONENTS:
* High light the COMPONENTS key. Please check if the following values exist in the right pane:
AdvancedInstallersNeedResolving
PendingXmlIdentifier
* If so, please right click on them and choose Delete them. Confirm the operation.
* Restart the computer."
Quote from : Vivian Xing
http://social.technet.microsoft.com/Forums/en/w7itproinstall/thread/227bcd32-f0dd-4aab-942e-07e0cadec083

HT4865 How do I stop the system from sending e-mail notification every time i update icloud?

How do I stop the system from sending e-mail notification every time i update icloud?

Pages. Every time I add new information to the program I get an e-mail asking me if I was the one logging on. It is an annoyance.

Does each new ios firmware upgrade contain the features from previous versions?

Does each new ios firmware upgrade contain the features from previous upgrades?

Not necessarily.
Just like OS X, somethings may be removed.

I would like to upgrade my operating system from 10.6 to 10.7?

How do I upgrage my operating system on my Mac from 10.6 to 10.7?

First check that your Mac meets the System requirements for Lion...
Lion Tech Specs > http://support.apple.com/kb/SP629
See here to Buy it...
http://store.apple.com/us/product/D6106Z/A/os-x-lion
If so Contact Apple in your Country to Purchase a Lion Download code...
http://support.apple.com/kb/HE57
In the US...
1-800-MY-APPLE or 1-800-676-2775
Be sure to make a Backup of your Current System Before Upgrading...
Also... Check here for compatibility of 3rd party Software you may be using... Also note that Rosetta is no longer supported in Lion.
http://roaringapps.com/apps:table
You should also consider more RAM... Lion is a hungry beast...
You can use these Links to check which RAM is suitable for your Mac...
http://eshop.macsales.com/shop/apple/memory/
If in the UK... Go to http://www.crucial.com
It is Important to get the Correct and Matching RAM
Those sites also have videos on how to Install RAM should you need it...

HT201269 I upgraded to the 5c from an old 3G type, I need to change over, do I use the computer, bluetooth or is there a procedure to follow?

I upgraded my old 3G Iphone to the new 5C and need to transfer the data and number. Is there a procedure to do this or do I just use the USB from the phone to my computer and use the ITUNEs.

Yes, use current iTunes on computer, Restore from back up of your iPhone 3g.

Can't lock the system from making changes...

MacBook PRO with 10.4.9 and the system will not remain locked upon restart.
For example, in System Preferences->Sharing, I change the name of the computer, lock it and then do a restart. Once back in OS X the computer is in a unlocked position. I can lock it but it won't stay that way.
Any ideas on how to make it stay in a locked position? Thanks!

Although it may introduce its own issues depending on usage, enabling the "System Preferences" > "Security" > "Require password to unlock each secure system preference" option should prevent pref panes from being unlocked after rebooting.
Generally, these pref panes become unlocked in this manner only in "admin" accounts so a better option might be to refrain from using an "admin" account for routine use - use a "standard" account for the day to day things, and keep a separate "admin" account to be used only for performing administrative functions.

How to create a 'System'variable to identify the system from merged dimension

Hi,
I have a webi report with merged dimensions on users and
roles. Users and Roles are coming from 3 different systems (ECC,BW,BOBJ). Now,
I don’t have the system field available in the queries to filter by the system.
So, I would like to create a variable for system where I want to be able to
identify the system (like ECC,BW,BOBJ) based on the merged “Role” dimension.
Could someone tell me , if it is possible to do that? And if so, how do I do
that? (I tried, but it's not working for me) I really appreciate your help.
Thanks,
Charvi.

HI,
You can not use inlist operator here.For inlist static values are required for comparison.I know this is not a solution for you.
For to use match operator you have to use multiple else-if conditions.I know this is time consuming but if you can not do anything from BW side then use like below formula.
=If(Match([Role];"FRP.*")) Then "ECC" ElseIf (Match([Role];"HRP.*")) Then "ECC" else"BW"
Add more conditions in the formula and if you are sure in your report there are only three type of roles.Then define condition only for ECC and BW systems in the variable and rest mark as else BO.
Thanks,
Amit

How do you restore the system from a backup file that you created previously

I have a notebook, Pavilion g6 - 1031TX running windows 7 64bit OS, and ran the backup utility a few weeks ago before running a full system recovery to attemp to fix an issue - this issue was fixed by warranty, and now I need to recover everything from the backup files, I have run the restore executable in the folder and it created another folder on my C: drive (System recovery files), how do I use this to restore the system to its previous state?

Unfortunately, the backup utilty portion of Recovery is not optimal solution for restoring many files.Unless you know exactly where they go you are stuck. Most of the important stuff such as photos,music,etc will be in the 'Users' folder under your user name. You will have to manually move them to correct location.
A better option in the future is Windows 7's backup app in Control Panel.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Scrubbing Reloading the System from Scratch

Hello, I am dealing with an HP laptop, model # dm4-3055dx, running Windows 7. The system recently contracted a virus or some sort of very annoying malware referred to as Qone8. I have tried numerous suggested solutions and several antivirus programs but I have not been able to get rid of it. I am now at the point of having no other choice but to scrub the system (reformat the hard drive) and reloading every thing from source disks. What I would like to know is will the recovery disks that I can get from HP (I unfortunately did not make these recovery disks myself when the system was new) be all that I need to accomplish this task? Do the disks contain the original OS software and all the drivers, etc. that will get my system back to it's out of the box operationg condition? If this is so, I assume that I will then have to download system updates from Microsoft and/or HP to get up to date. I plan on ordering the recovery disks for my system I just want to make sure there is nothing else I will need. Also, I would appreciate a reference to the written procedure for carrying out the scrub and reload process if anyone knows. Thanks much, Al

Thanks much for your response Mista B. Actually I was unaware that there was a built-in recovery process available. I may try that. When I read the referenced procedure it said that if this procedure didn't work for some reason that I would have to use the recovery disks so I should probably have these on hand just in case. The thing that I am afraid of is that if I don't do a complete erasure of the hard drive that the virus might not be eradicated completely and it will show up again on my bootup re-loaded system. Do you think that the internal recovery procedure will successfully wipe out the infection? Not to belabor the issue but you did not actually answer my question directly. What I wanted to know is if the HP recovery disks will be all that I need to reload a completely wiped computer system. Pehaps you implied that by suggesting the recovery from boot up but that is still not completely clear to me. I do appreciate you help. Thanks again, Al

There is NOTHING in my cloud! Just upgraded to the 5 from the 4s

I had TONS of pics and notes in my cloud....now that ive upgraded to the 5, its gone! Help!

Hopefully I can help you here as an N82 owner that switched to an N96. I do still have my N82 as my second phone.
The N82 is still regarded as nokia's best camera phone because of it's xenon flash. Indoors and in low light the N96 doesn't come close to it. Outdoors the N82 is only slightly better. I prefer the new photo's application in the N96, it's much better than the gallery in the N82.
Under day to day usage I would say the battery life of the N96 is on par with the N82. When listening to music or watching video the N96's battery performs better. This is due to optimizations in the newer operating system. The audio quality is also much better on the N96.
I have had no issues with the GPS on the N96. I would say they are even in that department but the bigger screen of the N96 makes it much better to use.
DVB-H is not believed to be widely available in the UK until sometime after the digital switchover completes in 2012. If a UK retailer has told you that DVB-H is one of it's major features then they have mislead you.
As for the speed the N96 was a bit slow on it's initial firmware. Yesterday they released the new v12.043 firmware that greatly boosts the performance of the phone.
Overall I am satisfied with my N96 but the N82 still gets plenty of use as a camera on nights out.
Message Edited by psychomania on 09-Dec-2008 09:21 PM

How do I upgrade my operating system from 10.1.1 to 10.5.8?

How do I upgrade my operating system frin 10.1.1. to 10.5.8?

kadamdog wrote:
How do I upgrade my operating system frin 10.1.1. to 10.5.8?
You can't. Nothing that runs under v10.1.1 can run 10.5.8.
No MacBook Pro can run under v10.1.1.
So something in your post is wrong.

How can i use the shared object already present in the system from java.

explanation:
Actually there are shared objects present in the jdk which is used by java itself.I want to know if i can use the methods in any library file(shared object) which is already present in the system.
Or the question can be put this way how does the java call the native methods? (Can we do that explicitly) in our code.

It isn't entirely clear what you mean by 'shared' objects and what the relationship with these shared objects and calling native code is.
There are no shared objects in the Java language, only the java platform.
The platform system properties are exposed via the System class (java.lang package).
You are free to create your own shared objects by using static member access or some other mechanism.
Your access to methods in any of the API's is dictated by the access type you have, normally public being the only completely open access allowing complete visibility.
You can call native methods, thats what JNI is for. Calling native methods in classes other than your own is generally done using the API provided by the developer(s) of those classes.

Technical Upgrade of the system from R/3 4.6 to ECC 6.0

Similar Messages

Maybe you are looking for