Temp Segement Extend Issue

I am running a view and I have been getting the following error:
ORA-01652: UNABLE TO EXTEND TEMP SEGMENT BY 1065 IN TABLESPACE SYSTEM.
Does anyone know any good methods of doing some analysis as to see what is going on. Any good SQL that someone can pass along??? any good links to one, or documentation. I am in a bind for time here, otherwise I would read the manuals....but you all know how it is when your under pressure.

Hello Raman Gill ,
First of all, you should NEVER use tablespace SYSTEM as a temporary storage.
Check if you have a temporary tablespace:
SQL> SELECT TABLESPACE_NAME
2 FROM DBA_TABLESPACES
3 WHERE CONTENTS='TEMPORARY';
TABLESPACE_NAME
MY_TEMP
If you don't have any, create one asap.
If you have one, change your user's temporary tablespace to this one:
SQL> ALTER USER nom TEMPORARY TABLESPACE MY_TEMP;
User altered.
Next, check the temporary tablespace physical properties:
SQL> l
1 SELECT TABLESPACE_NAME, INITIAL_EXTENT, NEXT_EXTENT, MIN_EXTENTS, MAX_EXTENTS,
2 STATUS, EXTENT_MANAGEMENT, ALLOCATION_TYPE, SEGMENT_SPACE_MANAGEMENT
3 FROM DBA_TABLESPACES
4* WHERE TABLESPACE_NAME='TMPGNX1'
SQL> /
TABLESPACE_NAME INITIAL_EXTENT NEXT_EXTENT MIN_EXTENTS MAX_EXTENTS STATUS EXTENT_MAN ALLOCATIO SEGMEN
MY_TEMP 1048576 1048576 1 ONLINE LOCAL UNIFORM MANUAL
Check the values (tell us yours). If your RDBMS version is greater then or equal to 8, you should get "EXTENT_MANAGEMENT=LOCAL".
Check this.
Regards,
Yoann.

Similar Messages

Trying to create a fact table,error:unable to extend temp segement

Using Oracle 10.2g
SQL>
create materialized view facts_table
(     s_id
,     g_id
,     sb_id
,     sc_id
,     y_id)
refresh with rowid
as      select s.s_id
,     g.g_id
,     sb.sb_id
,     sc.sc_id
,     y.academicyear
from      student s
,     grade g
,     subject sb
,     school sc
,     comqdhb.teachinggroup y;
ERROR at line 3:
ORA-01652: unable to extend temp segment by 1024 in tablespace POSTGRADSI am creating the fact table as materialized view because its specified for us.
I am trying to create a fact table from the dimension tables and its giving this error
what is the mistake kindly help.
Also when creating the fact table do all the columns need to be foreign keys compulsorily.
Edited by: Trooper on Jan 10, 2009 5:25 AM
Edited by: Trooper on Jan 10, 2009 6:37 AM

Well basically what your saying is absolutely right
I realized what i am doing right now is stupendous blunder.
Basically my aim is there are 5 dimensional tables that are created
Student->s_id primary key,upn(unique pupil no),name
Grade->g_id primary key,grade,exam_level,values
Subject->sb_id primary key,subjectid,subname
School->sc_id primary key,schoolno,school_name
year->y_id primary key,year(like 2008)
s_id,g_id,sb_id,sc_id,y_id are sequences
select * from student;
S_ID UPN FNAME COMMONNAME GENDER DOB
==============================
9062 1027 MELISSA ANNE       f 13-OCT-81
9000 rows selected
select * from grade;
      G_ID GRADE      E_LEVEL         VALUE
        73 A          a                 120
        74 B          a                 100
        75 C          a                  80
        76 D          a                  60
        77 E          a                  40
        78 F          a                  20
        79 U          a                   0
        80 X          a                   0
18 rows selectedThese are basically the dimensional views
Now according to the specification given, need to create a fact table as facts_table which contains all the dim tables primary keys as foreign keys in it.
The problem is when i say,I am going to consider a smaller example than the actual no of dimension tables 5 lets say there are 2 dim tables student,grade with s_id,g_id as p key.
create materialized view facts_table(s_id,g_id)
as
select s.s_id,g.g_id
from   (select distinct s_id from student)s
,         (select distinct g_id from grade)gThis results in massive duplication as there is no join between the two tables.But basically there are no common things between the two tables to join,how to solve it?
Consider it when i do it for 5 tables the amount of duplication being involved, thats why there is not enough tablespace.
I was hoping if there is no other way then create a fact table with just one column initially
create materialized view facts_table(s_id)
as
select s_id
from student;then
alter materialized view facts_table add column g_id number;Then populate this g_id column by fetching all the g_id values from the grade table using some sort of loop even though we should not use pl/sql i dont know if this works?
Any suggestions.
Edited by: Trooper on Jan 10, 2009 6:38 AM

Photoshop CS4 Extended, issues with resolution and font sizes on Mac

I have Photoshop CS4 Extended, which worked fine on my old 15 inch Macbook Pro, I think it was 2011 and had high definition display.
I now have a new 15 inch 'late 2013' Macbook Pro with retina display (2880 x 1800), and OS 10.9.4
I have 2 problems:
1) Using photoshop now, the resolution is a lot worse than with my old computer, even though my screen is higher resolution.
For example, the images themselves are worse resolution on my display, far less crisp and more pixelated than any of my other programs. And even the windows such as 'save as...' screens are terribly pixelated also. Is there a way to fix this?
2) When using the type tool, I cannot find how to change the size of the font. There used to be numbers which I could change, and also select the font type, both on the top menu bar always visible. Now there is not anymore. What there is there at the top, is what looks to be a bar on top of another bar. The top layer bar is on the left and reaches about one third of the way across the top, and I can drag it by its corner so it can extend more, but not less. It looks like there are things behind it which I cannot see, because it is over the top of them. Perhaps the text size and font options are stuck behind that. What can I do?
Many thanks!
Justin

Hi JJMack, you said "Seems like you want a low resolution display hook and external display to it." I do not know what that means. I did a google search for "low resolution display hook" and it came up with zero results. Also I do not have an external display, only my laptop.
Does anyone know what I can do to fix this issue? I would greatly appreciate any solution.
Thank you!

Acrobat 9 Pro Extended issues

7-29-08
Hello,
I work in an engineering enviromment doing visualization and
animation. I have been an advocate for Acrobat 3D as a better way
to communicate with our customers. We have a large contingent of
Autodesk Mechanical Desktop and Inventor users. I want to add
advanced features to the presentations we make to our customers. So
far it looks like Acrobat 9 Pro Extended does not play nice with
the Inventor 2009 series, neither the Desktop or Inventor. The main
issue is that the section tool creates nice outlines where the
solids are cut that describe the shape made by the cutting plane
but the solid surfaces the plane would make are missing. It looks
like the surface normal that should be there is flipped.
I have looked at the various presentation methods in this new
relase of Acrobat and they are a big step up but I want to be able
to open a PDF to a text document with animations embedded in it and
possibly narrations. I want a tavble of contents that has page
links to illustrations and paragraphs, and 3D files that my
customers can interact with. I see nothing in the training that
addresses this. Can you help?
Autodesk has it's own design collaboration package that
produces rotatable 3D files. It is called DWF Writer and the output
is more realistic than what Acrobat produces. For my needs should I
abandon Acrobat 3D functions and instead attach 3D DWF's?
Thanks,
Randy Van Nostrand
[personal information removed]

Thank you for your response. These forums are specific to the
Acrobat.com website and its set of hosted services, and do not
cover the Acrobat family of desktop products. Please visit the
following forums for any questions related to the Acrobat family of
desktop products:
http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/

Acrobat X "Reader Extending" Issues

I have Adobe Acrobat X version 10.0.3.
I'm trying to allow Reader users to sign documents. I went File > Save As > Reader Extended PDF in Acrobat. Saved the document and it does not allow the user to digitally sign the document. It does allow them to fill out the form and save it. I can sign the form in Acrobat. The users are using Reader X 10.0.1.
I used Acrobat 9.4.4 to "Reader Extend" the form and that allows the users to fill out, digitally sign and save the form.
Is there a issue with Acrobat X?

Are you using Standard or Pro? Standard does not apply the digital signature usage right when Reader-enabling a document.

Segement derivation issue in HR Postings

Hi,
we are derving segement using the BADI fagl_derive_segment its working properly for all FI postings
We are facing issue with HR Postings to FI that time its not taking from BADI its taking from somewhere we unable to identifing
please any body help on this
regards

i want to hold at document level in FI
for Eg: to day am going to post the document through HR to FI but the employer will make the pmt in the next month for the particular employee for time being we need to hold the document in FI... if u know the procedure plz let me know

SYSTEM tablespace extend issue

Hello, I am migrating from 8.1.7 to 9i and I got following error:
ORA-1652: unable to extend temp segment by 3200 in tablespace SYSTEM
As part of migration I added a new data file to system with 100 MB. So in total I have 250 MB of SYSTEM tablespace. Can someone tell mw what I can do?
thanks
Suresh

I have 6 other dBs in 9i and I want to bring all dBs to same level before moving to 10g. Plan is to upgrate to 10g by end of this year.
Can I just add more space and restart the migration or do I need to restore a backup copy and then start the migration?
thanks
Suresh

Codian 4520 and TMS 14.4.2 conference extend issue

Hello,
We are coming across issue not being able to extend a call in TMS. All endpoints are available and there is nothing booked. 15 mins prior to the end time, we receive the message on screen it prompts to extend the call. We extend the call for 15 mins. 15 mins later, we get another prompt to extend the call for next 15 mins. TMS shows the new extended time and everything looks normal. Then at 1 min remaining in the call (first 15 extend), the audio message comes saying the video is about to end in 1 min and the a minute later the call ends.
Is there any work around this as we are able to extend for only 15 mins. The 2nd extension looks OK in TMS with new end time, but it still disconnects.
Codian 4520 is running SW version 4.4
Thank you in advance for your help.
Regards,
Amrit

I've never had an issue with extending conferences using TMS and an MCU. Because they changed the TMS extend conference modes in 14.4, are you using endpoint prompt or automatic best effort? Do you see anything in the MCU event log at the time TMS extends the conference, where the conference gets updated with a new end time?
Note: Your question would be better off in the TelePresence section of the forums, where these devices are more actively discussed and people can help get you the answers you need. You can move your question to the correct section by editing it and changing the categories at the bottom.

WIFI Extender Issue

I have an internet extender for our WIFI and the light is blinking and I can't figure out what to do to update or deal with it?? This is driving me crazy. I see it on the Utility menu that there is an issue but even when I plug it in in close proximity to the router i get nothing? Do I need to hardwire it to update it?

Ok, thank you for providing the additional base station information.
Note: Your 2nd generation 802.11n AirPort Express base stations can only extend one of the Extreme's Wi-Fi networks. That is because, you have a 1st generation 802.11n AirPort Extreme, which can only operate on one of the radios (2.4 or 5 GHz) at a time. Most likely, the Express base stations will only be extending the 2.4 GHz radio. If you want both radios extended, you will have to upgrade your Extreme to a 3rd generation model or later that supports simultaneous dual-band operation.
I would suggest the following:
Power-down all of your AirPort base stations.
Bring both extender (Express) base stations into the same room as the Extreme.
Perform a "factory default" reset on all of your AirPort base stations.
Temporarily plug both Express base stations into the available LAN (opposing arrows) ports of the Extreme. Do not plug either Express base station into power just yet.
Power-up the AirPort Extreme. Wait for it to initialize.
Verify that you can get Internet access from both wired and wireless clients connected to the Extreme.
Power-up one of the AirPort Express base stations.
Use the AirPort Utility to configure the Express to extend the Extreme.
Allow the Express to restart. Verify that you can still gain Internet access with the extended network.
Power-down the Express; place it at the desired location, and then, power-up the Express; allow it time to reinitialize.
Verify that both the Extreme and the Express have solid green status LEDs.
Power-up the second Express. Again use the linked procedure to configure it to extend the Extreme. Allow time for the Express to restart and initialize.
Verify that all three base stations have solid green status LEDs.
Power-down the second Express, and then, place it at the desired location.
Power-up the Express and allow it time to initialize.
Again, verify that all three base stations have a solid green status LED.
Finally, verify that you can gain Internet access from your extended network.

Temp tablesapce space Issue

Hi All
In My Production database we have two temp tablesapces
when user running a concurrent programme it is erroring out with error unable to extend temp segemnt by 16 byte
.....something like that
but in temp tablepace 2 we have enough space
Y is it not useing that space?
Please let me know ASAP
Its a r12 Instance with 10.2.0.2 database
Thanks in Advance ,
Vinay varma

Hi
you can check with below mention query for sessions using TEMP tablespace. if you think some session is not relevant then you can kill them. this is easy way to monitor your temp tablespace.
SELECT b.tablespace, ROUND(((b.blocks*p.value)/1024/1024),2)||'M' "SIZE",
a.sid||','||a.serial# SID_SERIAL, a.username, a.program
FROM sys.v_$session a, sys.v_$sort_usage b, sys.v_$parameter p
WHERE p.name = 'db_block_size' AND a.saddr = b.session_addr ORDER BY b.tablespace, b.blocks;
Regards
Krishna

Airport Extending Issue

Hi, I wonder if anyone can help.
I am running my Broadband through my suppliers Hub, I have connected my Extreme base station to via the internet port at the back. In the AEB I have set the setting so that it acts as in bridge mode and it connects to the internet fine.
I have extended the Extreme with an Express, connected by ethernet cable and have set up the system again in bridge mode.
I must start by saying that this seems to be intermittent, where I can similar broadband throughput, however every now and again it goes from c40mb down load to 1.5 / 0.5 mb download. The upload remains the same at 17mb.
I have tried to locate the issue and have narrowed it down to something I see on the airport utility schematic of the set-up. When it works without issue, it shows the Internet connected to the Extreme and the Express connected to the Extreme. A linear set-up.
When the issue occurs, both the Extreme and the Express show they are connected to the Internet, so different to the linear schematic described above.
The issues seems to come, I reboot the broadband supplier hub and it fixes. Now I am now expert at all, but I was wondering whether this maybe a DCHP issue as this is being done by the Hub, not by the apple equipment.
Anyone else experienced this?

Have I set this up so the Main AE is now distributing the IP addresses?
If you followed my instructions yes.. you are now using the AE to distribute IP addresses.. just check on the client.. does it get an IP from the range on the AE then it is AE supplying it.
Also, what happens if I choose to do DCHP and NAT?
Double NAT.. that is why you want to avoid it.
But if you have a modem you bridge then you end up the same.. you have one NAT router in the network.

Wireless Repeaters Extender issues!

I have recently discovered that I can stream audio from my WRT54G V2 via a wireless extender.
I can not play internet radio, or stram Rhapsody via the extender.
The extender will not stream audio.
This is actually quite normal behavior of a Range Extender. Range Extenders work off of the idea of pulling a signal from the Base Station and then repeating the signal frequently, this generally causes rebuffering issues with most wireless devices within a network.
I belive I need a wireless extender that does not repeat the signal, more of a wireless access point.
How do I set this up. What do I need?

It actually should okay through the extender but since you're experiencing some buffering with the connection then I believe that this has something to do with the signal from the router. The extender is an N-standard while the router is just on G. So I suggest you buy a new router with MIMO technology. For the meantime with the router, just make sure the firmware is up to date then try again.

EA6500 and my range extender issues

I have using a Hawking HWREN1 for several years. Generally it works well and does what it is supposed to do.
HOWEVER, i have an issue that has been driving me nuts since I have owned this unit. When I experience a power reboot, or power outage, or a configuration change with the EA6500, I have to power cycle this extender.
I have a lot of folks on this extender network to the router so this is really annoying.
I recently installed some Linksys extenders on an EA4500 and the same thing occurred.
How do I fix this so when I have a router event, power, configuration, the extender will auto connect without a power cycle.
Thanks

Have you consulted the Hawking Mfr about there product as well? Generally if a client device can't re-establish the connection after in interruption, usually means the client device needs to be reviewed. The externers and devices could be picking up other interferences as well during the reboot process keeping them from re-establishing the prior connection.
If you temporarily disable WiFi security on the 6500 router and test a couple of reboots, will this device re-establish the connection on its own with out having to power cycle it? Re-enable security on the 6500 router after testing. Try setting WPA only and 20Mhz only and test. Then try WPA2 only and 20Mhz.
If the device can't re-establish the connetion on it's own, I'd phone contact the Mfr of this device and ask for help and information on it.
Besure that FW is up to date on both router and this device...

Photoshop CS6/Extended Issues

Anyone know whats wrong with the Photoshop CS6/Extended Download? It starts and remains at 0.00MB and its not my internet. Ive downloaded other files just fine * Attempted * its just the CS6.
ive tried on different computers at different IP's and still nothing.
Help!

Make sure you have cookies enabled and clear your cache. If it continues to fail try using a different browser.
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

Wifi extending issue as well as NAS off-site.

Having a couple of issues I'm trying to work around. Hope someone here can help me out. I'm not sure if this is a two part question or can be combined.
I have a garden office which I'm about to start working from. It's about 30-35m from the back of my house and wifi for some reason is barely 1 bar once it reaches the office. I've had power installed to the office recently via armored cable which is conncted to the house mains but no phone line or Ethernet. Running an Ethernet cable at this point isn't really an option and this also being London it's really wet so the damp will eat though it in no time. The router is also located at the very rear of the house and the only thing between it and the garden shed is a set of glass doors and 30m of open space.
Due to security I'd also like to keep my QNAP NAS inside the house and not with the system and be able to backup remotly without having to transport the system. So needing suggestions on connecting to it from my tower as well please.
I did recently buy an Apple Airport Extreme thinking it would be as simple as that but sadly the range was was even shorter then with my standard router. I left it connected for a week to see if it would condition itself eventually but to no avail. I simply couldn't even get a connection at all with it.
I'm in desperate need of getting it up and running and not sure where to go or start with this.

This worked for me and wifi is back up and working... bluetooth is still out...
Resetting the System Management Controller (SMC)
Resetting the SMC on Mac portables with a battery you can remove
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve

Temp Segement Extend Issue

Similar Messages

Maybe you are looking for