Template content shifting slightly from page to page?

Hi folks,
I am using Dreamweaver MX (yeah, I know) on OSX 10.6.8 and I am having problems with the navigation content in templates shifting slightly left and right between nearly identically created pages. 
See example at http://www.darrylvance.com/design_print.html and notice the shift when going from the sub-pages (which are in one position) back to the print, motion, other, etc. pages.
The top tier pages were created using one template (for the navigation) and the Print sub-pages were created using a new template which is identical to the first one, except there is the navigation links added below.
Another example is at http://www.darrylvance.com/art_painting.html where the same template was used for ALL the pages, but the Other and About pages have a similar horizontal shift as in the first example.
I am assuming the different widths of the various pages content is causing these particular shifts, which are never noticable in DW but appear when in the browser.  I have rebuilt and rebuilt the offenders from identical correct pages and changed the widths of the content, but I'm still getting the same problem.  
I'd guess there is some kind of anomaly in the table settings, but for the life of me I can't find it. 
Thanks for your help.
DV

Thanks, John.  However, I can't figure out where to insert the code on the pages.  The tutorial you referenced is using a CSS style, but I am not (as far as I can tell), and frankly am not experienced enough with CSS to understand where it might go, if at all, on my pages.
Do I edit the code on the templates and then let DW update the pages, or edit all the pages in the editable area of the code on each page.
Here is the code from the template:
<html>
<head>
<!-- TemplateBeginEditable name="doctitle" -->
<title>DARRYL VANCE | design: print</title>
<!-- TemplateEndEditable -->
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<link href="../2011%20darrylvance.com/noline.css" rel="stylesheet" type="text/css">
<script language="JavaScript" type="text/JavaScript">
<!--
function MM_reloadPage(init) {  //reloads the window if Nav4 resized
  if (init==true) with (navigator) {if ((appName=="Netscape")&&(parseInt(appVersion)==4)) {
    document.MM_pgW=innerWidth; document.MM_pgH=innerHeight; onresize=MM_reloadPage; }}
  else if (innerWidth!=document.MM_pgW || innerHeight!=document.MM_pgH) location.reload();
MM_reloadPage(true);
//-->
</script>
<!-- TemplateBeginEditable name="head" --><!-- TemplateEndEditable -->
</head>
<body bgcolor="ececec" background="../darrylvance.com/images/bg.jpg" text="#333333" link="#996600" vlink="#666666" alink="ececec" leftmargin="0" topmargin="0" marginwidth="0" marginheight="0">
<table width="24%" height="56" border="0" align="center" cellpadding="0" cellspacing="0">
  <tr>
    <td width="134" height="12" valign="top"></td>
    <td width="129" height="12" valign="top"></td>
    <td width="170" height="12" valign="top"></td>
    <td width="106" height="12" valign="top"></td>
    <td width="94" height="12" valign="top"></td>
    <td width="120" height="12" valign="top"></td>
    <td width="125" height="12" valign="top"></td>
    <td width="130" height="12" valign="top"></td>
    <td width="110" height="12" valign="top"></td> ....
thanks,
DV

Similar Messages

  • How to update content types enheriting from the System Page Content type

    After importing a design package I found out that my content types was missing some columns. I could add the missing columns to my "page" and "Article Page" site content type. When adding the exisiting columns I could choose to update
    everything that inherits from this type:
    This is working. However I still miss 2 columns in the "Page" Content type:
    1. Rollup Image
    2. Hide physical URLs from search
    If I roll back my dev environment I can see that these are inherited from the "System Page" content type which is not editable. The columns are in the "System Page" content type but They are gone in "Page" content type that
    should inherit the columns.
    So how do I update these?
    Thanks

    Hi Alex,
    Thank you for replying. I totally agree with you regarding not to modify the OOB content types. The content types I have created/modified is also my own "new" content types.
    However the designpackage import messed up the OOB content types somehow so I'm only trying to get back to the state before the import. The only thing I see is still missing is the two previously mentioned columns in the "page" content type.
    Do you have any other suggestions in how to get back to the "OOB State"?
    Thank you
    Update: this is my page content type. It's not set to read only so it should update the last two missing columns from its parent (system page content type) right?

  • Pages Templates - 4-pg Document from one landscape page

    Howdy all, i'm looking to create a 4-page document by folding a landscape page in half. does Pages have a template for my task. thanks!
    gig'em,
    skb

    Welcome to Apple Discussions Stephen
    I use Cocoa Booklet to create a booklet with any number of pages (best in a multiple of 4).
    For a folded letter-size booklet start with your Pages document in Legal size & larger than normal font size (start with 4-6 points larger). Export the Pages document to a PDF & then drag the PDF to the icon of Cocoa Booklet. It will create a new PDF in booklet form.

  • Content Shift Problem

    I'm still just learning DW, and right now I'm just doing minor updates to a website. But, it's come to my attention that computer screens that are more square (less wide) show one of my pages with lots of the content shifted.
    Here is the page...
    http://www.fsip.biz/About.html
    The "About Flight Systems..." part and every thing below it appear down below the "More about us" part and shifted to the left under it.
    Any advice on fixing this/any explanation to why would be greatly appreciated.
    Thanks!

    I do have a widescreen, but my browser windows are not opened full screen... they are more proportional to a normal screen.  If I resizeeither browser to be narrower than your web page, I still see what I assume is the proper display of the content:
    If what you see above reflects your problem, then I misread your description of it.

  • Сlear white area instead of template content

    I run iBooks Author, choose template and can't see template content. Only clear white area instead of template content. Screenshot:
    When I press page orientation change button content appears for a moment and disappears again. Screenshot:
    Please, help if somebody knows how to fix it. Thanks.

    The  pictures show you are using "Craft".  I just opened that same template and in  both modes there is visible content.
    You indicate that you have only opened to check and not added content, in which case  I suggest you  try different templates and check how they present content, if others behave in a similar manner, it may indicate an installation isssue.
    If you close and re-open the same template  and have the same problems - have you  opened the Layout options and changed the template ?   If not and you still have this issue, - in your situation I would un-install iBA and  re-install.
    ??? you show-iBooks Author, OS X Mountain Lion (10.8.2)    have you  updated to 10.8.4 ?

  • DW Template and table jump from page to page

    Hi,
    I have put together a rather quick, basic site for a friend
    in need (meaning=bare bones here to get it started faster). It's
    template-based and table-based.
    The site is generally working okay except that the content in
    terms of the tables jumps slightly to the left or to the right
    during navigation between pages. It all hangs together, but it
    shifts slightly, so I know something is out of line.
    The navigation is done with Fireworks CS3, so there may be
    something wrong with how my slices are set up. I've tweaked them a
    bit and made them better, but everything still shifts between
    pages.
    I appreciate any help or assistance anyone could offer.
    Here's the Url:
    Billy Marcus Website
    Many Thanks, Frank B.

    I saw no evidence that this was occurring. Or maybe I looked
    after you
    fixed it? Looks like it.
    Replace what you have with this -
    :root { overflow-y:scroll; }
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "brightbelt" <[email protected]> wrote in
    message
    news:gngtao$a86$[email protected]..
    > Thanks, I found the answer in this forum search.
    >
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=12&catid=189&threadid =1420064&highlight_key=y&keyword1=pages%20jump

  • I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

    I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

    The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
    You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
    You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
    Menu > Format > Import Styles
    The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
    Peter

  • When i am typing in a browser window, my browser page shifts slightly, highlights in blue, and does not allow me to keep typing.  i have to keep clicking on the page to continue to type letter by letter...is there some function on that i don't know about?

    When I am typing in a browser window, my browser page shifts slightly, highlights in blue, and does not allow me to continue typing...i have to click in the browser to allow typing to continue...is there a function running that I don't know about?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • When I click on a link from a web page opened in Safari I get a blank black screen. Why can't I see the contents of the page?

    When I click on a link from a web page opened in Safari I get a blank black screen. Why can't I see the contents of the page?

    Is this any link in any page, or one particular link in a particular page?

  • Adding Form pages via JS and templates. Stop text from copying to the new page

    Hello Community,
    Over the past few days I've been getting a crash course in Adobe acrobat, and JavaScript. One of our clients asked us to make a PDF form with fillable fields, and a button that will make a new copy of the form.
    I have the text fields, template, and javascript for the button to load the template.
    My problem is that text in the fields on the first page is being copied to the additional pages when they are made.
    I have been doing a ton of research and found a lot of answerrs talking about having the fields renamed. I have included the bRename part to my JS, and the text fields show that they are a differnet name, but it still pulls the data from the first page.
    here is the script I am using. I am also runing Acrobat X standard.
    var a = this.getTemplate("New Page"); 
    a.spawn({bRename: true});
    Any suggestions would be a huge help. I can provide any additional info needed.

    You can reset the fields on the newly created page. All of the fields on the page will have the prefix "Pn" where n is the page number of the newly created page. Since your code adds the page at the end, the code to reset the fields that you can use after the code that spawns the template can be:
    resetForm(["P" + (numPages - 1)]);

  • How do I remove content from my web page without deleting it?

    Hi,
    I previously created a webpage using iWeb on the domain name that came with dot.mac (now Mobile Me). I want to remove it from the online page without deleting it (I may want to use the content later). I've used other software at work (Morello) and there you would "archive" it. Can anyone please advise how I do it on my Mac?
    Thanks v much,
    Tony

    Tony:
    You can cause an entire page to not show in the site by using the Inspector/Page/Page pane to remove its link in the navbar. That would preserve that page until you decide to reintroduce it into the site.
    As for part of a page, the only way I could think of doing that is duplicating the page and remove the duplicate from the navbar. Then edit the original page to remove the content you want gone.
    OT

  • Combine content from selected aspx pages and Consolidate to pdf

    Hi All,
    I have a new requirement in one of the SharePoint portals :
    Contents are placed on ASPX pages using a content editor
    A feature to select pages and combine all the content from content editor of these pages into a pdf document
    Is there a way to access only
     the content stored in content editor and consolidate them in to one data source and then convert that in to a pdf file ?
    Thanks in Advance
    Pallavi

    Hi Pallavi,
    According to your description, my understanding is that you want to convert the content in content editor webpart to PDF file.
    I suggest you can use read content from content editor web part to a string variable using ContentEditorWebPart class.
    Here is a code demo about reading content using ContentEditorWebPart class:
    http://sharepoint.stackexchange.com/questions/87499/how-to-get-content-from-content-editor-webpart-cewp-to-a-custom-webpart-on-the
    ContentEditorWebPart.Content property:
    http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.webpartpages.contenteditorwebpart.content(v=office.15).aspx
    Then you can generate PDF file with string variable. To create PDF file, you need to download PDFsharp library and reference the dll in your project.
    Here is a code demo about creating pdf file using C#:
    http://csharp.net-informations.com/file/create-pdf.htm
    Best Regards
    Zhengyu Guo
    TechNet Community Support

  • Shifting from the second page printed

    hi,
    I create a report with reports10g .
    the size of the output paper is 15.2 * 21 cm. the papers used are continuous paper with matrix printer .
    I have a problem shifting from the second page printed.
    how to solve this problem?
    thank you in advance

    Hey Tom - sorry I failed to mention I did try powering off and on, and then the reset as you suggested.  It still does the same thing.

  • How to cache a content item like a Static HTML Page from UCM to Coherence/C

    Hi All,
    How to cache a content item like a Static HTML Page from UCM to Coherence/Coherence Web?
    Thanks

    Hi,
    Could you explain your use case in more detail?
    It does not look like proper use of coherence to cache static content - it more suited for dynamic content like user session etc.
    Adam

  • Copy a table from numbers to pages only with content

    Dear all,
    I'm rather new to iWork 08 and now i'm trying to copy a table from a numbers document to a pages document. When i do so it copies the table but with all the formulas and in pages it does not recognize what equals one cell to another. In other words, since the table in discussion has another table beneath it which is linked to with some simple formulas, and i copy only the above table it doesn't know how to link the results to the table below.
    To clarify if i copy and paste the whole numbers worksheet containing both tables it pastes into pages in the correct way, all the data being there.
    Having said that is there a way to copy only the content from numbers to pages?
    I ask this because i can think of no other way to copy and paste properly the table in question.
    You can clearly see here what i mean: http://gallery.me.com/bimmered#100024
    What you see in the left is the pages document zoomed out to 75%. If you look closely you can see in the lower left of it the unkown data in the table. On the center right you can see the numbers document showing exactly like i want to appear in pages too.
    On this pic you can see that copy and pasting the entire table works: http://gallery.me.com/bimmered#100031
    So...what's the catch?
    Thanks

    set the clipboard to (the clipboard as text)
    was THE script !
    Here is the enhanced version:
    --\[SCRIPT pasteValues.app]
    Enregistrer le script en tant qu'Application ou Progiciel : pasteValues.app
    déplacer l'application créée dans le dossier
    <VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Pages:
    Il vous faudra peut-être créer le dossier Pages et peut-être même le dossier Applications.
    Copier un bloc de cellules de Numbers dans le presse-papiers.
    Placer le curseur où vous voulez dans un document Pages (ce peut-être une cellule de table).
    menu Scripts > Pages > pasteValues
    Le script collera les valeurs seules.
    +++++++
    Save the script as an Application or an Application Bundle: pasteValues.app
    Move the newly created application into the folder:
    <startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Pages:
    Maybe you would have to create the folder Pages and even the folder Applications by yourself.
    Copy a block of cells from Numbers in the clipboard.
    Put the cursor where you wish in a Pages document (it may be a cell of a table).
    menu Scripts > Pages > pasteValues
    The script will paste the values only.
    Yvan KOENIG (Vallauris, FRANCE)
    le 18 novembre 2008
    property theApp : "Pages"
    --=============
    on run
    try
    set the clipboard to (the clipboard as text)
    on error (*
    • The clipboard was empty *)
    return
    end try
    my pasteIt()
    end run
    --=============
    on pasteIt()
    tell application theApp to activate
    tell application "System Events" to tell (first process whose title is theApp)
    keystroke "v" using {command down}
    end tell
    end pasteIt
    --=============
    --[/SCRIPT]
    Yvan KOENIG (from FRANCE mardi 18 novembre 2008 18:53:50)

Maybe you are looking for

  • HT1766 can i recover my data from the help of apple id

    dear sir I was using my Iphone 4 from last year.sir i have lost my data from my i tunes and fone. sir please tell me that can i recover my data with the help of my apple id or not. that was my important data .Spesioley my contacts i will wait ur earl

  • Back To My Mac to a Time Capsule through a 3Com Router not working

    I have a Mac Book Pro (10.5.7), Time Capsule (7.4.1), 3Com Office Connect Wireless Router (3CRWDR101A-75), a trial subscription to Mobile Me and a 2.5G iPhone (2.2.1). I have been unable to get BTTM from my Mac on a remote wireless connection to my T

  • New tabs dont pop up when I click to add a new tab, either by the tab bar or through the file menu.

    when I try to open up a new tab on my browser it doesn't do anything. I've tried the add a tab button on the tab bar, I've tried right clicking on the tab bar to add a tab, and I've gone through the file menu and nothing happens, like the command was

  • PowerPoint to Keynote Conversion

    Keynote seems to convert PowerPoint slides with the .ppt and .pptx suffixes, but not the macro-enabled .pptm suffix. Is there a work around?

  • Work flow builder issue

    Hi, Workflow is getting deactivated in production system after Upgrade, this is happening only in production system, we are activating it manually each day,.This does not happen in Dev and Quality systems, Please help. Regards, Rajiv