Template for File Import

Hi,
I am trying to download the file import template getting below error.
Unable to retrieve content. Additional information for "Remote Region error #11":
An error occurred while invoking task Manage File Import Mappings. Review the FunctionalSetupServer logs for more details on this error
Is there anyother place i can download the template.
thanks
Phani

Hi,
I'm having the same issue. I raised an SR for this and got the feedback that the issue is addressed by development. A fix for this (known as: Patch 20633522) will be delivered end of March.
Cheers,
Sander

Similar Messages

Can we mix mandatory and optional field entries for file import?

Can we have devices with mandatory fields only and some other devices with mandatory and optional fields within the same CSV file used for file import?

Hi Rita and Sandra,
That is correct, you can mix mandatory and optional field entries for file import. However, if you don’t have OS type and version, the alerts matching would be impacted.
Thanks,
June

Template for files

I am looking for a template for the back of files (those you actually store in shelves). Anyone has seen or created those ?
JoJo
15 inch Powerbook G4 Mac OS X (10.4.5) 2 GB RAM

Jojo,
Try here: http://www.iworkcommunity.com
or here: http://www.microsoft.com/mac/resources/templates.aspx?pid=templates&browser=1&ap p=&group=&category=&template=
or even here: http://avery.com/us/Main?action=software.PDFamilyDesign&catalogcode=WEB01&node=1 0194637&cat=Special+Occasions&subcat=Weddings
-Dennis

Can't edit imported files; iPhoto asks for file import upon each launch

Hi,
My hard drive recently went bad and I lost all photos (didn't back up...I've learned my lesson). An authorized repair shop replaced the drive and installed 10.5.2.
I just tried to import 150 new photos from my camera. After importing from the camera, iPhoto said all files were imported successfully. I was trying to create room on my memory card, so when asked if I wanted to delete the originals, I said yes. (I was planning on backing up the photos just as soon as I got them onto my drive).
I see them as thumbnails, etc., but I get the grey/black exclamation graphic if I try to edit. Fullscreen gets me a black screen, that's it. Each time I launch iPhoto, it says that it detects 150 pictures not imported. Would I like to import? I choose yes, but the same problem persists.
When I view each thumbnail, the reported sizes average about 2 mb, so it seems that the real photos are somewhere. I just don't know where. As a last resort, I guess I could try to do screen captures of the thumbnails, but that'll take forever, and I really want these originals back.
Any ideas? Thanks in advance.

ObamaFanRC
Are you running a Managed Library or a Referenced Library?
If you're running a Managed library, then it's the default setting, and iPhoto copies files into the iPhoto Library when Importing
If you're running a Referenced Library, then you made a change at iPhoto -> Preferences -> Advanced and iPhoto is NOT copying the files into the iPhoto Library when importing.
If you're running a managed library is sounds very like a damaged database file to me.
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums back.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

Correct settings for file import?

I can't get FCP to import a QT MOV file. In QT, the info window for the video says:
"Format: DVCPRO, 720 x 576 (768 x 576)...
FPS: 25.16...etc"
I have tried setting FCP to DVC PRO PAL, and to various other DVC PAL settings. None of them work. I keep getting the horrid little error message: "File Error: 1 file(s) recognized, 0 access denied, 1 unknown." which means FCP isn't recognizing the file no matter what settings I try. Any suggestions?

I have contacted them and they are very responsive. I'm waiting for a reply on this particular issue. The mystery is that I have imported several other files output by Cinematize into FCP with no problem. I suspect the dodgy frame rate. If I could I would send you a grab of the QT info window which gives the info on the clip in question, but I see no link to attachments on this list.

The templates for file renaming are missing

I don´t have templates in the file rename area in lightroom 5

Go to Preferences dialog > Presets tab and click the Restore Filename Templates button.

How can I hash with the MD5 for file

I am a new learner in Java.
Is there any useful code example or materials for me to learn how can i hash with MD5 for file.

import java.security.*;
import sun.security.provider.Sun;
import java.io.*;
import sun.misc.*;
public class DigestOfFile
    public DigestOfFile(String mode) throws Exception
        assert(mode != null);
        digestAgent = MessageDigest.getInstance(mode, "SUN");
    synchronized public byte[] digestAsByteArray(File file) throws Exception
        assert(file != null);
        digestAgent.reset();
        InputStream is = new BufferedInputStream(new FileInputStream(file));
        for (int bytesRead = 0; (bytesRead = is.read(buffer)) >= 0;)
            digestAgent.update(buffer, 0, bytesRead);
        is.close();
        byte[] digest = digestAgent.digest();
        return digest;
    synchronized public String digestAsBase64(File file) throws Exception
        byte[] digest = digestAsByteArray(file);
        String digestAsBase64 = base64Encoder.encode(digest);
        return digestAsBase64;
    synchronized public String digestAsHex(File file) throws Exception
        byte[] digest = digestAsByteArray(file);
        String digestAsHex = encodeBytesAsHex(digest);
        return digestAsHex;
    private static String encodeBytesAsHex(byte[] bites)
        char[] hexChars = new char[bites.length*2];
        for (int charIndex = 0, startIndex = 0; charIndex < hexChars.length;)
            int bite = bites[startIndex++] & 0xff;
            hexChars[charIndex++] = HEX_CHARS[bite >> 4];
            hexChars[charIndex++] = HEX_CHARS[bite & 0xf];
        return new String(hexChars);
    private static final char[] HEX_CHARS =
    {'0','1','2','3','4','5','6','7','8','9','a','b','c','d','e','f'};
    private MessageDigest digestAgent;
    private BASE64Encoder base64Encoder = new BASE64Encoder();
    private byte[] buffer = new byte[4096];
    public static void main(String[] args)
        try
            java.security.Security.addProvider(new Sun());
            DigestOfFile shaDigestAgent = new DigestOfFile("SHA");
            DigestOfFile md5DigestAgent = new DigestOfFile("MD5");
            for (int argIndex = 0; argIndex < args.length; argIndex++)
                    String base64Digest = shaDigestAgent.digestAsBase64(new File(args[argIndex]));
                    System.out.println("Base64 SHA of " + args[argIndex] + " = [" + base64Digest + "]");
                    String hexDigest = shaDigestAgent.digestAsHex(new File(args[argIndex]));
                    System.out.println("Hex    SHA of " + args[argIndex] + " = [" + hexDigest + "]");
                    String base64Digest = md5DigestAgent.digestAsBase64(new File(args[argIndex]));
                    System.out.println("Base64 MD5 of " + args[argIndex] + " = [" + base64Digest + "]");
                    String hexDigest = md5DigestAgent.digestAsHex(new File(args[argIndex]));
                    System.out.println("Hex    MD5 of " + args[argIndex] + " = [" + hexDigest + "]");
        catch (Exception e)
            e.printStackTrace(System.out);
}

Shortcut for 'Pro Import After Effects'?

Hello!
I read about Keyed Up and modifying the .txt file for the shortcuts in After Effects, but I can't seem to figure out a way to set up a shortcut for File > Import > Pro Import After Effects
Is there anyway to set up a shortcut for this function? I used it extremely frequently, so it would save me a lot of time.
Thanks!

Nope. You would have to write a mini-script that invokes this command and tie it to one of the script function keys or create a button in a custom palette....
Mylenium

Where can i get transport file for bc400's template programs to import

hi
where can i get transport file for bc400's template programs to import to miniwas
would like to do the exercises for tw10 and tw12
regards
jan

Thanks Spencer.
I downloaded it, etc. and that didn't work.
It actually seems to work the same way as before I downloaded that driver, meaning, it prints but leaves it in the "# Document Pending" status.
Since the wireless HP print server isn't working (No connectMgr.exe file) there's no connection and therefore the doc won't print.
RE: Print/Server software out of date. The software was working for many months after originally installing it on this laptop. Then it just stopped. Now it can't find the .exe file and that's odd.
If I could find that file I could just save it where it needed to be and I'd be good to go.
Thanks for the help.
Going to uninstall and reinstall again, just for fun. I'll report back.
J

Import templates for iBooks Author

How can I import more new book templates for iBooks Author?

I don't see a template 'import' per se, but you can take a document/template, modify it and then save it as a custom template if you like. File/Save As Template...

How to create bulk configuration files from a template for staging?

Hello,
We have created a sample configuration for ISRG2 2901 Router. The sample configuration is long, and with copy/paste it is possible to skip some lines, and it is difficult to ensure the configuration of every device is standardized due to this error possibility. What we are trying to achieve is first create a template from this sample configuration file, and then create configuration files for each device seperately and automatically. After creating this configuration instances, we want to be able to distribute the configuration files (and possibly the ios) to the devices during the staging phase. Since there are about 1000 2901 routers, creating configuration files is important?
From searching we have found the following tools:
1) CCE (Cisco Configuration Engine): This tool seems to be very efficient for distributing the created configuration files. We may use the serial number of the device, and it provides almost zero touch provisioning of the configuration files to the devices. Creating the configuration file from the template seems to be manual, i.e enter the ip addresses of the interfaces, the routing tables one by one for each device. How can we use velocity template for device configs?
2) Ciscoworks LMS Prime: It is possible to create a baseline template for the devices, and after getting the backup configuration of the routers, it is possible to compare the actual configuration of the device with the baseline template, and understand if there is any difference with each other. This is indeed very useful in order to keep the configuration standardized, we again could not find a way to create bulk configuration files from the baseline template.
3) Solarwinds Config Generator: This tool is useful for creating a configuration file from a template, but again not for automatically creating configuration files, and needs manual intervention.
4) Excel Macro: It seems that some people have achived to automatically create configuration files with using an excel macro, but we could not find a procedure or tip of how to achieving this.
5) Pearl or TCL/TK Script: Again since we are not software developers but from networking field, it is difficult to achieve a working form of this scripts or codes due to to lack of documentation and development experience.
So our problem comes down to creating a template from a sample configuration, and creating bulk configuration files from the template. Is there a specific tool or procedure to achive this purpose?
Thanks in Advance,
Best Regards,

Hi,
Try this one http://www.gen-it.net
Regards,
Stuart

New line markers in template preparing for XML import

How can I put new line markers (called static texts), in a template, preparing it for XML import, so that I get one line per object?
I have put normal TAB characters as "static texts" as the InDesign help file shows, between the tagged placeholder texts. But all texts come out on one line when I enable the white space in the template to be kept when importing.
See a longer description from me: http://forums.adobe.com/thread/788685?tstart=0
Best regards,
Andreas

Are you sure, that the nl characters are deleted?
They are usually not shown in the XML display.
You can also use an adapter module instead of a Java mapping. So you can do a split in mapping, but the conversion to the flat file in the adapter module. If you have already a Java mapping for this purpose, you can easily create an adapter module based on that Java code.
Regards
Stefan

Iphone TouchOSC template for Logic (includes all necessary files)

Hi Ya'll,
I had been looking for TouchOSC templates for LogicPro for a while. Since I didn't find any that were useful to me I put one together myself. Now I want to share it with anyone who needs basic track control in Logic.
The zip file contains 3 files necessary to get the template to work:
1. OSCulator file - necessary for routing and translating messages from TouchOSC to Logic. That file needs to be opened in OSCulatior.
2. Logic Key Commands file - needs to be imported into Logic. It contains definitions of the functions contained in the TouchOSC template.
3. TouchOSC template file - this file is the template itself and needs to be loaded into TouchOSC on iphone (i presume this will work on ipod touch as well but don't have one so I couldn't test it).
The zip file is located at:
http://methodsunltd.com/touchOSC/Logic-BasicTouchControl.zip
Hope this becomes useful to all who wanted to control basic and what I think most useful controls in Logic.
Cheers,

yeah, I love touchOSC as well, especially it's streamlined aesthetic! But just like you, I wish Apple developed Logic control surface apps for iphone and ipad. The moment they do I'm getting an ipad.

Oracle VM Templates for OEBS Release 12.1.3 Vision Media - missing files

I downloaded all 11 parts ( 8 - DB and 3 - APPS) for this media pack template - Oracle VM Templates for Oracle E-Business Suite Release 12.1.3 Vision Media.
Per the media pack README I unzipped each file and and then concatenated (and gunzipped) them into directories for DB and APPS respectively. According to the media pack README there should be README.txt and System.img files in each directory in addition to the template .img file and vm.cfg files. Neither directory contains README.txt or System.img files, and only the APPS directory contains a vm.cfg file. Both directories do include a template .img file.
# ls -l OVM_OL5U6_X86_64_EBIZ12.1.3_DB_VIS_PVM
total 48004528
-rw-------. 1 root root 49156626432 Apr 16 17:17 ebs1211db.img
# ls -l OVM_OL5U6_X86_64_EBIZ12.1.3_APPS_VIS_PVM
total 16065672
-rw-------. 1 root root 16451237888 Apr 17 08:35 ebs1211apps.img
-rw-r--r--. 1 root root 448 Feb 24 2011 vm.cfg
When I put each directory into a tar ball and attempt to import either template, they fail with an error message indicating the System.img does not exist...because it doesn't.
Are the README.txt and System.img files missing from the template,? Do i need to download the template again?
Any insight and assistance is appreciated.
Thank you,
Phil
Edited by: PhilS on Apr 18, 2012 10:36 AM

PhilS wrote:
I answered my question and/or discovered the issue. To get the Oracle VM Template (8 parts) in question to the server where there was space to extract them, I had to copy them between servers. The first time I copied them I did it via an NFS mount and apparently some corruption resulted causing the template to not import successfully. I deleted the template parts from the destination server and Hi Phil, Can you please explain how you managed to import the files once after copying to the destination? ie, until now I was using FTP to download the templates(which are in .tgz format)
copied them a second time via scp. This time the files were intact and the template imported successfully to the OVM Manager. Issue resolved.I am kind of a beginner with Oracle VM environment and completely lost with making it easier to import the templates. I mean, following the readme.txt I unzipped the files, which created the four files for application and database tiers and then I used to tar repack them (following a suggestion received from another thread) and then imported them through a FTP session
The entire activity took almost two and half days, when an alternative method as what you mentioned looks quite feasible to implement, especially while dealing with large templates like the ones for E-Business suite. Hence please answer the following:
What do you mean by secure copying to target file. Does it mean you copied the template elements to a particular folder with VM Server?
Once after copying the files using secure copy, how did you import them?
What is your VM environment? A lot of things have changed with VM Server 3.1.1, the OVS/seed_pool structure is not any further available and the template import has been restricted to http, https or FTP sessions.
Please supply the details, if possible
regards,
raj

Can you import custom templates for keynote?

Can you import custom templates for keynote?

Yes you can. You can import a Motion project file directly into DVD Studio Pro, though when I tried it took a loooooong time (depends on the size and complexity of the project of course). Here's a tutorial on how to do that:
http://www.wonderhowto.com/how-to-use-dvd-studio-pro-4-with-motion-53426/
OR... you can just export your Motion project and import it into DVD SP as a Quicktime file, and put that in the Menu section. Then you can add your buttons and so forth and proceed from there.
I hope this helps. Good luck!

Template for File Import

Similar Messages

Maybe you are looking for