TemplateSource property not set in non interactive form
Hi ,
I m creating non interactive PDF form. When i am inserting interactiveform elelement in the view its templateSource property is not getting bind no any value.may be because of that when click to edit interactive UI element and added some Text Field from library , but i am not able to save (save all metadata ) after doing any changes to interactive element.
Edited by: kavita chavan on Dec 20, 2007 12:01 PM
Edited by: kavita chavan on Dec 20, 2007 12:39 PM
Hi Kavita,
The templateSource's value should be created automatically as <ViewName>_<UIname>.xdp and this file could be found under the directory
src/configuration/Components/<your_component>
What's your version of NWDS?
Regards,
Dao
PS: You'll have a better chance of getting answers to your question in the SAP NetWeaver/Interactive Form by Adobe forum
Similar Messages
-
Problem when generating an non-interactive form in Web Dynpro java.
Hi,
I'm trying to create a PDFDocument using a creation context in java. Everything works fine when the Interactive property of the creation context is set to true. When I change it to false however, the Web dynpro application hangs and eventually throws the following exception:
java.net.SocketTimeoutException: Read timed out
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:806)
I'm wondering why this exception occurs when i'm generating a non interactive form and never appears when i'm generating a form with the Interactive property set to true.
Any ideas?
Edited by: Arjan Nieuwenhuizen on Feb 25, 2008 3:24 PMYeah I know changing the form properties will solve my problem, but since i'm developing a training for Interactive Forms in Web Dynpro Java, I wanted to figure out why the (static / non-interactive) combination didn't work, turned out to be a template problem, which i still didn't figure out, except the fact that having flowed content on your template is not the problem.
My ideas about your question:
When we have the layout of an Interactive Form, its clear if it's meant to be static or dynamic, we don't know however, if it's interactive or non-interactive.
I don't think we can judge a layout to have an Interactive or non-interactive purpose, can depend on the situation in which the same form is shown/used:
- One moment it can be interactive, e.g. user is filling in the form, can enter data etc.
- Next moment it can be non-interactive, e.g. form is shown to another user.
So it's more the scenario/situation that determines if the form is interactive or non-interactive. -
Want to generate non-interactive form
Hi Experts,
I want to generate some reports from webdynpro java as pdf.i want to do
this as non-interactive form.Please tell me how can i generate such a non interactive form , if possible with example or as step by step procedure.
Regards,
Ramanan.PHello,
if you set the flag 'Readonly' for your Interactive form element it will be a non-interactive form.
Best regards,
Dezso -
Bundling different (non-interactive) forms
Hi,
I want to bundle different non-interactive form. When I run the report FP_CHECK_BATCH_PDF_RETURN with the settings:
Bundle Mode = X
All Forms in One PDS = checked
i got the error message "Call contained error(s): ASSEMBLE (FP_JOB_OPEN)"
When I select Bundle Mode = M everything works fine. I tested the report on many different systems with different ADS versions, but the error was always the same. Can anyone tell my what the problem is?
Thx in advance!
MarkusHi Markus,
the SAP Help explain exact your problem. I don't get into it. I tried it with release 7.31 and also with 7.02 a few weeks ago and everything worked fine. Just work through the help.
Here is a Wikipage which provides an example-coding:
How to assemble PDF form pages into one file - ABAP Development - SCN Wiki
I also got this link in my pocket,but you sound very familiar to the language)
Formulare bei der PDF-R�ckgabe b�ndeln (SAP-Bibliothek)
You have to set fp_outputparams-getpdf = 'M', that's a must do, to use the function.
Regards
Florian -
Hi
DECLARE @XMLA nvarchar(3000)
, @DateSerial nvarchar(35);
-- Change date to format YYYYMMDDHHMMSS
SET @DateSerial = CAST(GETDATE() AS DATE);
--SELECT @DateSerial
Set @XMLA =
N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
<ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<KeyErrorLimit>-1</KeyErrorLimit>
<KeyNotFound>IgnoreError</KeyNotFound>
<NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
</ErrorConfiguration>
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
<Object>
<DatabaseID>MultidimensionalProject5</DatabaseID>
<CubeID>giri</CubeID>
<MeasureGroupID>Fact Internet Sales</MeasureGroupID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>';
EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
iam executive the query when iam getting below error.
[Execute SQL Task] Error: Executing the query "DECLARE
@XMLA nvarchar(3000)
, @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
how to solve this error;
please help meWhat are you trying to do? What sort of data source is SHALL-PCAdventureWorksDw?
When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
If you explain why you think this would work in the first place, maybe we can help you.
Erland Sommarskog, SQL Server MVP, [email protected] -
Sending the adobe interactive form as non-interactive form through email
Hi ,
I am trying to send the interactive adobe form as non-interactive form through email.The interactive form size is very large because of the interactivity.
Can anybody suggest how to do this.
Regards,
DebasisDear Antony,
Thanks for the reply.
I got you but can you pls guide me how to go about it.
I need to send the email while submiting the form.So when and how i will be mapping each data node /attibutes of the main form with the intermediate form.My interactive form is of 30 pages and it may grow upto 40 pages.My response is with the to the main form where i am showing the success message.
Regards,
Debasis Nayak -
To print image in Non interactive form
I have a requirement where image file is attached to QM02 transaction, now i want to print the attached image on QM02 print output. I am planning to use Non interactive form method to print the form output.
Can anyone pls guide me how to insert/print image file which is attached at the transaction level.Otto:
I followed the steps you have described in one of your earlier reply but I am unable to see the image on the non-interactive ADOBE form.
Here is what I did.
1) In the "Code Initialization" section of the form, I coded to get the SE78 stored image in to XSTRING field (by calling method cl_ssf_xsf_utilities=>get_bds_graphic_as_bmp)
2) I created the image field and bound it to the XSTRING field derived in step 1. And I check marked "embed image" in layout of the image field.
I also followed some other threads on this forum and tried to create a graphic node with a global field of mime type "BMP" and bound my XSTRING data onto it but to no avail.
Any ideas?
Thanks.
Jitendra Mehta -
Hi,
I have a SSIS package named FlushFeed4Data that copy data from a table named TableA in a database named DatabaseA located on SQL server 2005 named SQL2005 to another table named Table B in a database named DatabaseB located on a server 2012 named SQL2012.
The server SQL2005 is setup like a linked server in the server 2012. My package runs smootly: first it removes all old records in SQL2012.DatabaseB.TableB & then copy all records from SQL2005.DatabaseA.TableA to SQL2012.DatabaseB.TableB to without
any error message. It runs well both when I ran debugging in SQL Server Data Tools (Microsoft Visual Studio) & when I executed this package in SSIS of server SQL2012. However when I use a job named FlushFeed4Data to run this package, I've got error message:
Executed as user NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5058.0 for 64 bitCopyright (C) Microsoft Corporation. Code: 0xC002F210. Source: Insert Data Execute SQL Task. Dexcription: Executing the query "Insert
Into SQL2012.B.[dbo].TableB ..." failed with the following error: "Login failed for user '[MyCompanyDomainName]\SQL2012$' ". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not
set correctly, or connection not established correctly. End Error DTExec: The package execution returned DTSER_FAILURE (1) ... The package execution failed. The step failed.
Please help!
Thanks
EdwardHi Athur,
Thanks so much for your reply. I'd really appreciate about that. Following the article given by your link, I got error message when trying to create proxy
sg 14529, Level 16, State 1, Procedure sp_add_proxy, Line 45
Proxy "MyCompanyDomainName\SSISProxyDemoUser" is not a valid Windows user.
USE msdb
--Create a proxy and use the same credential as created above
EXEC msdb.dbo.sp_add_proxy
@proxy_name = ',
@credential_name=N'SSISProxyCredentials',
@enabled=1
GO
So I have a question: Do I have to create a new user account that can access our network named
PS: Below are the steps I followed the article:
--Script #1 - Creating a credential to be used by proxy
USE MASTER
GO
--Drop the credential if it is already existing
IF EXISTS (SELECT 1 FROM sys.credentials WHERE name = N'SSISProxyCredentials')
BEGIN
DROP CREDENTIAL [SSISProxyCredentials]
END
GO
CREATE CREDENTIAL [SSISProxyCredentials]
WITH IDENTITY = N'MyCompanyDomainName\SSISProxyDemoUser',
SECRET = N'abcd@0987'
GO
--Script #2 - Creating a proxy account
USE msdb
GO
--Drop the proxy if it is already existing
IF EXISTS (SELECT 1 FROM msdb.dbo.sysproxies WHERE name = N'SSISProxyDemo')
BEGIN
EXEC dbo.sp_delete_proxy
@proxy_name = N'SSISProxyDemo'
END
GO
and the rest of the script 2 hasn't been proceeded due to error:
--Create a proxy and use the same credential as created above
EXEC msdb.dbo.sp_add_proxy
@proxy_name = N'SSISProxyDemo',
@credential_name=N'SSISProxyCredentials',
@enabled=1
GO
--To enable or disable you can use this command
EXEC msdb.dbo.sp_update_proxy
@proxy_name = N'SSISProxyDemo',
@enabled = 1 --@enabled
= 0
GO
Please advise me!
Thanks,Edward -
Hi .
I was creating the pass the values t in temp tables though s sis package vs2012 .
First I was taken on executive SQL TASK.
IN EXCUTIVE SQL TASK . I was write the stored proce:
Sp;
reate procedure USP_GETEMP2333
AS
begin
Select eid,ename,dept,salary from emp
end;
create table #temp(eid int,ename varchar(20),dept varchar(20),salary int)
insert into #temp
exec USP_GETMP02333
go.
It was executive correctly.
I was taken another sequence container. In the sequence container iam creating one executive sql
In 2<sup>nd</sup> excutive sql task: sql statements is
if object_id('emp_fact_sal') is not null
drop table emp_fact_sal
select eid,ename as emp_name,sal_bar=
case when salary<=5000 then 'l'
when salary >5000 and salary<=7000 then 'm'
else
'h'
end
into emp_fact_sal from #temp.
and one falt flies it was taken to designation .
iam changing all connection properties:
in oldeb connection:
in excutive sal task properties .
delay validation is true,
and retain connection maner is also true,
and package mode is 64 bit is false.
But iwas excutive in 2<sup>nd</sup> excutive ql task .
Iam getting this type of errors,
[Execute SQL Task] Error: Executing the query " if object_id('emp_fact_sal') is not null
drop ta..." failed with the following error: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
correctly.
Please help meArthur suggestion works but you shouldnt even be doing this on a SQL Task.
Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
is an undocumented behavior and should not be relied upon. -
How to get a non-interactive Form
Hello,
Is it possible to use livecycle Forms to generate a non-interactive PDF using a pdf file? If using a xdp file i get a non-interactive pdf file, however, when using a pdf file as the input the pdf is always interactive. the parameters I used:
sPreferences = "PDF";
options = "CacheEnabled=False&RenderAtClient=False",
thank youFrom Visual Basic 6 I am attempting to merge several copies of a template form. Since these copies all have the same field names, InsertPages will not work properly. Alternatively I sought to re-name the field names in my code. Turns out this is a read-only property. My last thought is to somehow convert the "interactive" pdf into a "static" (or, "non-interactive" one that I will be able to merge. Anyone know how to do this? thanks
-
Export data to adobe non interactive form
Hello,
I would like to fill a non interactive adobe form with seized data in visual composer.
How I can do that please ?Tony-
I have not worked with Adobe Forms so I am not sure if this is feasible. If I had to populate a Web Dynpro form with data from a VC form I would have an action which would invoke the URL of the Web Dynpro application. This URL would have appended to it the field name and values as entered in the VC form. In the Web Dynpro component I would retrieve all the parameter values being passed through the URL and then set these values into the context. If the context is bound to a form, the data will automatically be displayed.
Cheers-
Atul -
Print Preview in RFx does not show new Adobe Interactive Form
Hello Experts,
I am trying to assign a standard Adobe Interactive form as the output form for SRM RFQ. I have carried out the following steps in customising under "Define Actions for Document Output".
- Selected bid invitation Action Profile = BBP_PD_BID
- Go to "Processing Types"
- Create a new Processing Type called "External Communication"
- Set the following values to the new processing type:
- Form Name = BBP_BID_INV_ADB
- Form Type = P PDF-Based Forms
- Format = BBP_BID_INV_ADB_MAI
- Personalization Type = 5 - Recipeient Variable Replacement
- Save Changes
My problem is that when I go to into the BID (RFx) and click "Print Preview" it picks up the standard Smartform, not the new Adobe form I have added as required.
Please can you advise of any additional config settings or other steps required to ensure that the Adobe Form is called when I click "Print Preview"?
We are on SRM 7.0.
I look forward your response.
Regards,
MattHi Matt could you please tell me how do you solve your issue? I have the same and I cant find the solution.
Thanks a lot
Kind Regards -
Rendering a non-interactive form
How do we use scripting in Live Cycle Designer to render a non-interactive pdf. Data is populating the form using xml. Thanks and help will be appreciated
Couple of issues that you should know before proceeding.
1. To communicate with a web service from the form using Reader you will need to Reader Extend the form using Reader Extensions Server and not Acrobat. Acrobat does not turn that right on. Note that if you intend to use Acrobat this is not an issue.
2. There is no means of getting the PDF form while it is running into the context of a SOAP message. There is no programmatic way to put the PDF into the payload from the form. I can get the data but not the form.
3. Once the data is populated into the form we could change all of the fields to Read Only ...thereby achieving the flattening that you require.
4. The web service will not be able to save or print locally through the client. The client will have to do that . The client being Reader or Acrobat. -
Control not going from Adobe Interactive form to ABAP WD Event handler
Hi
I am facing an issue with adobe interactive forms and WD ABAP integration.
The buttons in adobe interactive form when clicked is going round and round and the control is not going to the ABAP code(WD ABAP event handler code whatsoever). I have also set the debugger but the control is not moving to the ABAP code from the adobe interactive form.
Can anyone help me what can be the issue here and how can I resolve the same?
Thanks.
SidHi Babi,
In the adobe form layout library Use the Submit(which internally means submit to SAP) button from the Webdynpro Native category.
Only this button action can connect adobe to web dynpro.
Whenever we click on this particular button the event will be trigger in the ONsubmit event of interactive form UI element in the webdynpro.There we can write our abap code.Hope this will help you.
Regards,
Simi A M
Edited by: amsimi on Mar 22, 2011 11:37 AM -
Error during activation of adobe non-interactive form
Hello everyone,
I am trying to activate a non-interactive adobe form and am getting the below error:-
"Field p_lifnr has a conversion routine(see SAP note 796755)".
I have made sure that this field (which is corresponding to LFA1-lifnr) has context binding, I even tried using below code in its interface:-
GET PARAMETER ID 'LIF' FIELD p_lifnr.
and also tried the below:-
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = p_lifnr
IMPORTING
output = p_lifnr.
just in case..
but all above in vain,can someone let me know what might be the problem....or where would I find this 'SAP note 796755' ?
Thanks,
Rachna.Hi,
I am facing the same problem of "Error during activation" while activating the SAP interactive form.
I am using ECC 6.0, ADL 7.1 and Adobe reader 8.0
Could you please suggest a way out.
Thank You
Aser
Maybe you are looking for
-
Logic Remote iPad app not working
I've have Logic Pro X installed on Mountain Lion and the latest IOS on an iPad (3rd gen) running Logic Remote but can't get them to work together. After I choose the Mac pop up boxes keep appearing with either an option to re-connect to Mac or the at
-
I can't change fonts in FireFox 4.0
Since I upgraded to FF 4.0 I've noticed the font-rendering doesn't look quite right; the fonts are too light and seem a bit blurry. The font itself has changed from Arial to something else. I've tried changing the font back to Arial and selecting dif
-
Hi, In a Java Servlet, I need to convert HTML codes into an RTF/word document. Any help for some related Java API ? Regards, Priya Ranjan Sahay Message was edited by: Priya Ranjan Sahay
-
My 4GB USB drive is only showing 217.2MB available, any ideas how to fix this?
My 4GB USB drive is showing only 217.2MB available but there isn't anything displayed in the Finder window that I can delete. Any ideas?
-
Text_symbol_replace?
Hi All, I am redaing the text using READ_TEXT FM & also using FM 'TEXT_SYMBOL_REPLACE' but the values are not populating only plain text is getting. can any one tell m,e what is wronge? by debugging also i am unable to find plz let me know proper sol