Temporary Error Update Order

Hi friends,
We comment on the case, I have a cartridge and a view created for use. It invokes the method of creating orders of OSM through a client for a moment the log showed me the following:
Now when I use the Update method indicates that the id of the order did not succeed and that the view is invalidated.
Then without changing everything works fine
OSM am using 6.3.1.247 I am aware that the patch came out 31 but not yet applied it.
Someone can tell me why this happened.
[IdMensaje=16822] - [Send Message]-[OSM]: Could not update order in the message OSM ,IdOrdenOSM not found
SERVER: Server_01 [ERROR] [06-01-2010 10:30:37.750] (EnvWSCustomImpl.java:1078) - [IdMensaje=16822] - Resultado : Invalid View
Thanks

Could you post what you are doing in EnvWSCustomImpl.java?

Similar Messages

Error while updating order - even after using recommended format

Used below while updating order:
1) Transaction
2) Synchronization
still getting below error:
Caused by: atg.service.pipeline.RunProcessException: An exception was thrown from the context of the link named [updatePriceInfoObjects].
        at atg.service.pipeline.PipelineChain.runProcess(PipelineChain.java:393)
        at atg.service.pipeline.PipelineChainContext.runProcess(PipelineChainContext.java:207)
        at atg.service.pipeline.PipelineManager.runProcess(PipelineManager.java:475)
        at atg.commerce.pipeline.CommercePipelineManager.runProcess(CommercePipelineManager.java:123)
        at atg.commerce.order.OrderManager.updateOrder(OrderManager.java:2905)
        ... 64 common frames omitted
Caused by: atg.commerce.CommerceException: Saving order 818320012 failed because doing so would result in data being overwritten. This save attempt had an out of date repository item [pricingAdjustment].
        at atg.commerce.order.processor.ProcSavePriceInfoObjects.writeProperties(ProcSavePriceInfoObjects.java:1428)
        at atg.commerce.order.processor.ProcSavePriceInfoObjects.savePricingAdjustments(ProcSavePriceInfoObjects.java:1316)
        at atg.commerce.order.processor.ProcSavePriceInfoObjects.saveSubtotalPriceInfos(ProcSavePriceInfoObjects.java:1185)
        at atg.commerce.order.processor.ProcSavePriceInfoObjects.saveShippingItemsSubtotalPriceInfos(ProcSavePriceInfoObjects.java:1076)
        at atg.commerce.order.processor.ProcSavePriceInfoObjects.savePriceInfo(ProcSavePriceInfoObjects.java:1052)
        at atg.projects.store.order.processor.StoreProcSavePriceInfoObjects.savePriceInfo(StoreProcSavePriceInfoObjects.java:101)
        at atg.commerce.order.processor.ProcSavePriceInfoObjects.saveOrderPriceInfo(ProcSavePriceInfoObjects.java:807)
        at atg.commerce.order.processor.ProcSavePriceInfoObjects.runProcess(ProcSavePriceInfoObjects.java:716)
        at atg.service.pipeline.PipelineLink.runProcess(PipelineLink.java:255)
        at atg.service.pipeline.PipelineChain.runProcess(PipelineChain.java:365)
        ... 68 common frames omitted
Caused by: atg.repository.ConcurrentUpdateException: no rows updated oldVersion=1 for item=pricingAdjustment:pa5090009 in GSATransaction=atg.adapter.gsa.GSATransaction@2c6042ec    thread=[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)' transaction=Xid=BEA1-439B3F1AD2C4DD758FA4(744502646),Status=Active,numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=0,seconds left=3600,activeThread=Thread[[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads],XAServerResourceInfo[ATGProductionDS_atgdv02g3]=(ServerResourceInfo[ATGProductionDS_atgdv02g3]=(state=started,assigned=none),xar=ATGProductionDS,re-Registered = false),SCInfo[atgdv02g3+ss_ps01]=(state=active),local properties=({weblogic.jdbc.jta.ATGProductionDS=[autoCommit=true,enabled=true,isXA=true,isJTS=false,vendorID=0,connUsed=true,doInit=false,'null',destroyed=false,poolname=ATGProductionDS,appname=null,moduleName=null,connectTime=38,dirtyIsolationLevel=false,initialIsolationLevel=2,infected=false,lastSuccessfulConnectionUse=1384308810784,secondsToTrustAnIdlePoolConnection=10,currentUser=null,currentThread=null,lastUser=null,currentError=null,currentErrorTimestamp=null,JDBC4Runtime=true,supportStatementPoolable=true,needRestoreClientInfo=false,defaultClientInfo={},supportIsValid=true]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=ss_ps01+devrdatgap138.dev.nintendo.com:10180+atgdv02g3+t3+, XAResources={ATGPublishingDS_atgdv02g3, WLStore_atgdv02g3__WLS_ss_ps01, ATGSwitchingDS_A_atgdv02g3, ATGSwitchingDS_B_atgdv02g3, WSATGatewayRM_ss_ps01_atgdv02g3, ATGAgentDS_atgdv02g3, ATGProductionDS_atgdv02g3},NonXAResources={})],CoordinatorURL=ss_ps01+devrdatgap138.dev.nintendo.com:10180+atgdv02g3+t3+)
        at atg.adapter.gsa.GSAItemDescriptor.updateItem(GSAItemDescriptor.java:7507)
        at atg.adapter.gsa.GSARepository.updateItem(GSARepository.java:1075)
        at atg.commerce.order.processor.ProcSavePriceInfoObjects.writeProperties(ProcSavePriceInfoObjects.java:1424)
        at atg.commerce.order.processor.ProcSavePriceInfoObjects.savePricingAdjustments(ProcSavePriceInfoObjects.java:1316)
        at atg.commerce.order.processor.ProcSavePriceInfoObjects.saveSubtotalPriceInfos(ProcSavePriceInfoObjects.java:1187)
        at atg.commerce.order.processor.ProcSavePriceInfoObjects.saveShippingItemsSubtotalPriceInfos(ProcSavePriceInfoObjects.java:1077)
        ... 74 common frames omitted

Update your Order with the pattern suggested by Devon, here is the link
Design Pattern for Updating an ATG Order | Devon Hillard&#039;s Digital Sanctuary

How to simulate a dml error in order to test try-catch code block inside a stored procedure

Hi,
What would be the easiest way to simulate a dml error in order to test a try catch block.
I would like to do it with a simple command from outside the stored procedure if possible.
I tried dropping the table that was updated but it hangs
Thanks,
Dani

Dropping the table that is the target of the procedure will give you an unpleasant surprise: the CATCH block will not fire. To wit, errors like missing tables can only be caught in outer scopes, but not in the procedure where the error occurs.
But you would add a fake constraint to a table which causes the update to fail. You need to do this in advance, not while running the procedure.
Erland Sommarskog, SQL Server MVP, [email protected]

Error Update was terminated at time of VFO1

Dear All,
I have created sales order with ref to contract no through standard BAPI ,now i am going to create bill with ref to sales order (which i have created through BAPI),while saving the bill it will give me error Update was terminated and in SBWP .i have received mail that contains:
Transaction..   VF01
Update key...   4A98C715DA854584E10000000A08351C
Generated....   29.08.2009, 16:34:28
Completed....   29.08.2009, 16:34:29
Error Info...   M2 815: Error while determ. loc. crcy: exchange rate type M
After that i have created as sales order without use of BAPI with same contract number ,and after that i have created bill with ref to sales order at that while saving it give me no error
so pls help me out on this,

Can you contact you functional team showing the below message
Error Info... M2 815: Error while determ. loc. crcy: exchange rate type M
Check ifthe below note give you some help.
Note 1362966 - BAPI: FAGL_PLANNING - incorrect exchange rate type is used
Thanks
Rishi Abrol

Error"Update was terminated' while doing picking and data was not saved

hi experts,
I have created a sales order. for that i created a deliery.then i created shipment .and i have put pick qty and batch.
it gives a message Express document " Updated was terminated "received from author XXXX.
and picking is not saved and i'm not able to do PGI.
Please help me.....
Thanks in advance,
ria

Hai,
Analyse this error in ST22 - ABAP runtime error or in SM13 - update request.The system will show the error update records in red color. Click the error & see the problem in funciton module.THis may be because of no ranges problem or any changes in print out program. Also if u have any BADI activation for the sale order & any changes in this program also leads to this error.

Repeats for work items with temporary errors for background WI

Hi!
I have a task that generates a temporary error method in order to activate the Repeats for work items with temporary errors. It currently has 5 repeats at intervals of 2 min. After running above the WI-status is 'Error'. When Restart by SWPR runs only once and sends the message 'Work item set to error following 05 failed attempts'.
Please can tell me any way that when run again relaunch fixed repetitions.
I welcome your comments.
Thanks.
Regards,
Raisme Wilhelm

Hi Raisme,
Please show me since it is the design of the workflow. It is probable that you are inside a repetitive sequence that send several work items.
Best Regards
Victor Enzo
Edited by: Victor Enzo Montenegro on Feb 23, 2011 3:34 PM

How to check credit card number when clicking Update order

Hi Experts,
I need to check credit card number when clicking Update order.
I put if(document.forms['order_positions'].elements['nolog_cardno'].value == "") in submit_refresh function, but get "document.forms.order_positions.elements.nolog_cardno.value is null or not an object" error. Any advises?
Thanks, Jin

Try like this
if ( document.forms['order_positions'].elements['nolog_cardno[0]'].value == "" )

Publish Error: There was an error updating .Mac

Hello,
This is the first time I have had any problems with iWeb when trying to publish a site. After the site and pages are created, I keep getting the error:
"Publish Error: There was an error updating .Mac".
- I have iWeb 1.1.2
- I am not over quota.
- My account is not expired.
- I've tried multiple times over a 1.5h period.
- I've tried closing/restarting iWeb, rebooting my machine, and manually deleting all files in my .Mac/Web/iWeb folder in case any got corrupted somehow.
- I've emailed tech support about this too.
Hopefully this is just a server issue on Apple's side and is temporary. Anybody experience problems around today?
Cheers.
MacBook Mac OS X (10.4.9)

Okay I am very relieved to hear that people out there are experiencing what seems to be the exact same issue (and that I don't have to suffer through Apple support). I as well, after experiecing this issue, was totally unable to login to my website (password kept getting rejected).
As of right now - 12h after first experiencing this issue - I still cannot publish to iWeb.
When trying what was suggested earlier, a lowercase login, I received a new and more interesting error message:
Publish Error: An error occurred while publishing file “navbarseparator3.png.” Try choosing File > Publish All.
I then tried to "Publish All" and viola - it worked! What is fascinating to me is that I have used the same login/password for a year now with no problems and how a single capital letter in a login can cause so much grief. Hmm. Anyways, thank you Mr. Apnewbie for your suggestion.
I think .Mac is a superb service - however for the price, there are still some very fundamental kinks that it seems they didn't throughouly test out at Apple before charging people/releasing their software. Mainly, all the kinks related to multiple passwords with multiple web sites (and obviously logins!).
Mac OS X (10.4.9)
I'm marking this as "solved" (though why we all mysteriously had the same odd experience at the same time is yet unresolved. The solution suggested above has worked for me. Please try and comment here if it works for you too. I hope it does.
Mac OS X (10.4.9)

Temporary Error Message 14

I keep getting this message when trying to open my email. It's been happening for several days. I've tried, but it still keeps happening. Help!
Temporary Error: We’re sorry, but Verizon Yahoo Mail can't load due to a temporary error. You can try back again shortly, or visit our help pages for ways to troubleshoot the issue.

This is a common error message found with Yahoo! server emails. The troubleshooting tips will ask you to change the browser or update it. Trust me, it doesn't work.
Try getting an email client (Outlook, Windows Live Mail, Thunderbird) and set it up to get your emails on the computer. If you have a smartphone, set up your emails on it.
Until Yahoo! decides to admit there is an issue with their server, this is the only solution to get all your emails. You know all emails aren't shown as long as you keep receiving temporary error 14. Try an email client and I will bet you will find extra emails that you never saw online.

Error updating table 372"

Hi friends,
when iam generating a excise invocie the system triggers"Error updating table 372"
Any possible solution for this?
Thanks
Ivy

Dear All,
I done this--by doing some configuration changes.
Normally while doing Exports we are tempted to use the same sales area and accordingly we may give the combination of excise grp+series grp+export type in IMG>>>Logistics General>>>India>>>Business transactions>>>Outgoing excise invoices>>>Maintain default excise groups and series groups.
Once after removing the export type to your sales area combination--system will show this error--and we cannot even post the Excise invoices.(J1IIN)
I tried in my IDES--that with export type(Ex.Export under Bond)--with this assignment--i am able to post my excise invoices.
Once after removing this assignment of export type--again i am getting this error.
Actually i am not even aware why it is happening--almost after two months of struggle--i find this.
(i feel it is in the same way that we cannot even open/See a sales order by deleting sales group which was created&used previously)
i am sharing this because somebody may get a little help with my thread.
Mark this if helpful--there by others can easily find this thread.
Phanikumar

New blog entries experience "error updating .Mac", and no "add comments"

Blog always worked fine. Now new blog entries get error updating .Mac message. New post does appear online, but there is no Add Comments option, despite it being selected in the inspector. Also, the blog main page doesn't show a title in the title bar at top. Might this have something to do with the new Mobile Me features (which I haven't tried or signed up for). When I delete the new posting and publish, it publishes fine. This error even happens with the template pg, so it's not anything to do with my formatting. Thanks for your help.

I have not tried publishing a new Blog entry since the new "me" thing, but I did try just a text edit on an existing Entry and republished the Entry. It seemed to function normally.
However, all of my Comments are missing from all my Blog entries - although the hit counts are still there.
And my Slide Shows won;t work and thumbnails won't enlarge on my photo pages.
Everything was working perfectly before this big "improvement" we just got.
I sure hope this is temporary or I just might throw a fit. There was a lot of valuable stuff in those comments, and if there won;t be a Comments function at all, I won't be able to keep my blog at mac. com or me whatever.
Why fix what isn't broken?
jessica

ERROR: Update mode C is not supported by the extraction API - R3 11

Hi gurus,
I just tryed to implement the solution I found at this link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
The data source is based on an Infoset on the KONV R/3 Table.
I setted the AIM delta process and I did all the activities as written in the document.
The process works if I load data to bw in "full", with "Init without data transfer" and "delta" mode. Of course if I change a Purchase document, it will be posted in the delta queue and then loaded to bw with the next delta load.
The "initialize delta process" (with data) doesen't work and returns the following error:
Update mode C is not supported by the extraction API
the error code is R3 11.
have you any idea about it???
Thanks!!!
Regards!
Matteo

Hi,
for me it sounds quite simple. It is that the update mode 'C' get flagged as 'not allowed' for this extractor. Did you check with rsa3? I guess you will get the same error message. May be you can start debugging in rsa3 to find the place where the update mode gets checked.
Anyway, it shouldn't be a issue as you have a workaround. May be you should raise a error message at sap because of this.
regards
Siggi

Error publishing from Muse - "error updating device redirect setting"

After recent upgrade of Muse I am getting an error message when publishing. The pages are published correctly but there is an error which prevents the final completion of the process. message = "Error updating device redirect settings click resume to try again." it never works. What is up? is this a Business Catalyst error or a a Muse error?

I turned off the firewall, logged out from Creative Cloud and restarted my computer. After rebooting, I logged in to Creative Cloud, open Muse and connect to Business Catalyst without no problem,

When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this

When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this problem previous and was able to fix by doing a complete wipe of my computer and reinstalling CC. However, I should not have to wipe my computer clean everytime I need to do a CC update. HELP!

Hi,
Please download the updates directly from the link below:
WIN: All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools
MAC: All Adobe CC 2014 Updates: The Direct Download Links for Mac OS | ProDesignTools
Regards,
Sheena

Error 'Update Was Terminated' - While clearing an open item

Hi,
We are facing a problem where we receive an error - "Update Was Terminated" when we try to clear some entries for 3-4 vendors (posted in period 12 of year 2006. it happens only for those 3-4 vendors). We have identified the problem as follows:
1) We ran program SAPF190 and found that there is a defference in the 'debit balance' and Total of line items' for these vendors. I ran program SAPF71 (in Quality server) which rectified some entries. However, some entries still remain incorrect and these entries that still remain incorrect are ones - "which have a posting date of 10 oct 2006, but the posting period picked up by the document header is period 12, instead of period 7". Now, some other documents posted for the same vendor on the same date have picked up the correct posting period i.e. 7. I am really baffled at how this actually happened and howcome the system allowed it??
2) After running program SAPF190, there were some entries that got corrected (these entries were just not captured by the system in the balance field, and did not have the same problem as the entries mentioned above where the wrong posting period was picked by the system). When i tried to clear the line items for the vendors whose entries had been rectified, it still gve the update error. When i checked the number range status, i noticed something very odd:
"The number range status shows a number much higher than what the system is automatically picking for the documents (e.g system picks 230 as the document number when posting, but the number range staus in FBN1 shows current number as 256). Also, once 256 is reached (i posted 26 documents for it) and we post the 257th document, the error remains and the status number now moves up 100 places to 356). At this time if i post another document it picks the number 258 instead of 356...and if i keep posting documents till 356 is reached, im sure when i post the 357th document, the status will jump to 456)
Can someone please help me here!! I dont understand how and why this is happening!!
Thanks!!
Regards,
Angad

>
Ravi Sankar Venna wrote:
> Hello,
>
> Please let me know the ERROR name you are getting and what is the transaction code you are using to clear. (F.13 or F-44)
>
> Try to analyze the dump in ST22.
>
> Regards,
>
> Ravi
Hi,
The error is "Update was terminated" . It sends this message to my inbox!! After searching a bit i found about the two reports - SAPF190 and SAPF071. After running them i found some balance mis-match. I ran the two programs and it rectified those mis-matched entries!! However, even after that, it is giving me the same "update was terminated" error. We are using F-44 for clearing.
This error is coming only for those entries which we had posted using a user-exit. Basiaclly these are entries for late payment which were programmed to be posted directly at the time of invoicing. I just checked the code of the exit, and these entries were (astonishingly) made directly into the BKPF and BSEG tables (infact the posting period was hard-coded to '12', which is why even when my posting date for these documents is 10.10.2006, it still enters posting period '12' in the header instead of '7'.). Therefore, there were balance mis-match when we saw the monthly balance in FK10N and compared it with the line items total for that month. However, on running report SAPF071, it corrected those entries, but the update error problem still persists!!
The exact error:
Update was terminated
System ID....   QAS
Client.......   100
User.....   MOHGYA323233
Transaction..   FB1K
Update key...   4A206A2D00E5001202000000C0A80A35
Generated....   04.06.2009, 11:24:59
Completed....   04.06.2009, 11:24:59
Error info...   F1 805: Clearing: Line item 001

Temporary Error Update Order

Similar Messages

Maybe you are looking for