Temporary Queue BMQ size limit?

Hi,
is there a size limit for tha temporary queue on BEA Message queue?
To explain better the ones managed by BMQ itself, not the permanent ones configured in the init files.
I ask this since I have this kinf of transaction on my application:
client send a message by BMQ to Server that performs the receive and send the ACK Message to client whose buffer is 30 KB(30.000 byte), so is there a size limit on the BEA Message Q temporary queues?
Thanks.
Ciao
Andrea

That depends. In most cases, there is no limit for tmq queue size.
But you need to know the following things:
1. On Unix/Win, the tmp queue is stored in the heap of qe process and doesn't have size limit. But on OVMS, tmp queue shares the global section with other queues. So obviously the max tmp queue size is limited.
2. You can define the tmp queue quota in init file. In this case, the queue size is limited.
3. If the tmp queue quota is exceeded, the message will be stored in SAF/DQF files, which may have size limit.
4. If the message is sent cross groups, the message may be in link_buffer_pool when linkdriver is busy for network I/O. The link_buffer_pool is limited.
5. Each message cannot exceed the specified max message in this group, which is defined in init file and needs to be less than or equal to 4M bytes.
Regards,
Leo

Similar Messages

Problem sending message, temporary size limit of server

I get this message when I try to send mail with attachments of less than 365 KB. "The size of the message you are trying to send exceeds a temporary size limit of the server. The message was not sent; try to reduce the message size or wait some time and try again. The server responded: 4.1.1...temporary failure." This just started happening. I've e-mailed files with much larger attachments and never had an issue. I tried e-mailing smaller attachments with the same results. I also tried waiting until the next business day hoping that the issue would resolve itself to no avail.
Please Help!
Kim

The error message is coming from your email providers server. What do they say when you ask them what is wrong with their equipment?

When Broker Restarts None of the Temporary Queues Are Created

Somehow when the broker restarts none of the temporary queues are getting recreated. The queues were created successfully the 1st time and the applications were happily exchanging messages. Things just fall apart when the broker restarts.
I'm able to reproduce this problem consistently by doing the following:
1. Start imqbrokerd (mq start)
2. Start client application
3. Shutdown imbrokerd (mq stop)
4. Start imqbrokerd (mq start)
After the producers in the client application have reconnected the following messages are displayed in the console. I'm only able to get the client app to work again is if I restart the client apps.
[02/Mar/2009:23:01:01 CST] attempting to set Message Bytes Limit to 10485760K for destination temporary_destination://queue/192.168.20.14/49823/1 [Queue]
[02/Mar/2009:23:01:01 CST] attempting to set Message Size Limit to 10240K for destination temporary_destination://queue/192.168.20.14/49823/1 [Queue]
[02/Mar/2009:23:01:01 CST] [B1065]: Accepting: [email protected]:57123->jms:37646. Count: service=9 broker=9
[02/Mar/2009:23:01:01 CST] [B2083]: Unable to create destination temporary_destination://queue/192.168.20.14/49823/1 [Queue], autocreation is forbidden
Do you guys have any idea on what's going on? Does anybody know of an existing workaround?
Environment:
- OpenMQ 4.3
- CentOS 5.2
- Sun JDK 1.6_05
- Spring 2.5.5
- Camel 1.3.0
I also looked at the code and found only one location where the error message is used. I still need to figure our how I can get the conditional expression to evaluate to false.
share/java/com/sun/messaging/jmq/jmsserver/core/Destination.java
1395 if (!DestType.isAdmin(type) && !canAutoCreate(DestType.isQueue(type),type) && !BrokerMonitor.isInternal(destination)) {
1396 throw new BrokerException(
1397 Globals.getBrokerResources().getKString(
1398 BrokerResources.W_DST_NO_AUTOCREATE,
1399 getName()),
1400 BrokerResources.W_DST_NO_AUTOCREATE,
1401 (Throwable) null,
1402 Status.FORBIDDEN);
-bash-3.2$ /tmp/openmq-4.3/mq/bin/imqcmd query bkr -t q -n MYQUEUE -u admin
Password: admin
Querying the broker specified by:
Host Primary Port
localhost 7676
Version 4.3
Instance Name imqbroker
Broker ID
Primary Port 7676
Broker is Embedded false
Instance Configuration/Data Root Directory /tmp/openmq-4.3-data/var/mq
Current Number of Messages in System 202
Current Total Message Bytes in System 317483
Current Number of Messages in Dead Message Queue 201
Current Total Message Bytes in Dead Message Queue 316444
Log Dead Messages true
Truncate Message Body in Dead Message Queue false
Max Number of Messages in System unlimited (-1)
Max Total Message Bytes in System unlimited (-1)
Max Message Size 70m
Auto Create Queues true
Auto Create Topics true
Auto Created Queue Max Number of Active Consumers unlimited (-1)
Auto Created Queue Max Number of Backup Consumers 0
Cluster ID
Cluster is Highly Available false
Cluster Broker List (active) mq://192.168.1.123:7676/
Cluster Broker List (configured)
Cluster Master Broker
Cluster URL
Log Level DEBUG
Log Rollover Interval (seconds) 604800
Log Rollover Size (bytes) 268435456
Successfully queried the broker.
I also tried versions 4.4 and 4.2 and received the same behavior :(

The application is inside an app server but we're not using a resource adapter as we're using Spring and Camel to hide the JMS details. Spring (JMSComponent) manages the connection directly. (We current don't have any JMS connection pooling as well.)
<bean id="jmsTransactionManager" class="org.springframework.jms.connection.JmsTransactionManager">
<property name="connectionFactory" ref="jmsConnectionFactory" />
</bean>
<bean id="jmsConnectionFactory" class="com.norvax.framework.jms.OpenMQConnectionFactory">
<property name="openmqBrokerConfiguration">
<props>
<prop key="imqBrokerHostName">$remoting{openmq.hostName}</prop>
<prop key="imqBrokerHostPort">$remoting{openmq.hostPort}</prop>
<prop key="imqReconnect">true</prop>
</props>
</property>
</bean>
<bean id="jms" class="org.apache.camel.component.jms.JmsComponent">
<property name="connectionFactory" ref="jmsConnectionFactory" />
</bean>
I'm going to write a very basic producer using Spring without using Camel and see if I'll get the same behavior. I'd like to see if the way Camel uses JMS is what's making OpenMQ broker to deny creation of temporary queues.
Thanks,
Jeff

Error 4.7.1 message exceeds size limit, but it doesnt

I am receiving this error every time I try to send a message.
The size of the message you are trying to send exceeds a temporary size limit of the server. The message was not sent; try to reduce the message size or wait some time and try again. The server responded: 4.7.1 <[email protected]>: Recipient address rejected: [email protected] exceeded daily recipients threshold . See http://postmaster.frontiernet.net.
This happened randomly and without provocation. I have talked to my mail provider and they are telling me that it is an internal error. They have checked my connection settings and everything is set up properly. The messages i am sending are just test messages with one word in them.

Did your provider also tell you that mime encoded attachments are about 30% larger than the original file size of the attachment. So a 4Mb attachment would exceed a 5Mb limit.

In perfdatasource querying for global snapshot failed with error 'the size limit for this '

I received scom alerts from two win 2k8 r2 servers , hosting exchange 2010 mailbox roles , the alerts came almost in same time from both servers ,
can I ignore those alerts
or can someone give a me a clue how can I troubleshoot those alert , please any help would be appreciated
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
from Ops-mgmt logs
Log Name: Operations Manager
Source: Health Service Modules
Date:
Event ID: 10104
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: server 1
Description:
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.Windows.Server.2008.OperatingSystem.PercentMemoryUsed.Collection
Instance name: Microsoft Windows Server 2008 R2 Enterprise
Log Name: Operations Manager
Source: Health Service Modules
Date:
Event ID: 10104
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: server 1
Description:
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.Windows.Server.2008.LogicalDisk.PercentIdle.Collection
Instance name: " edb file path "
Log Name: Operations Manager
Source: Health Service Modules
Date:
Event ID: 10104
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: server 2
Description:
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.Windows.Server.2008.NetworkAdapter.CurrentBandwidth.Collection
Log Name: Operations Manager
Source: Health Service Modules
Date:
Event ID: 10104
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: server 2
Description:
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.ForefrontProtection.FPE.Server.PerformanceCollection.RealtimeScanMessageRate

Hi Blake ,
Thanks for your reply , I appreciate your help ,
I didn't put the alert from scom console because they were same as the events ( same source )
Health Service Modules, I didn't want to spam
more :-)
also the two servers encountered the issue were mailbox servers and part of same DAG , it worth mention the alert were resolved
by Exchange 2010 Correlation Engine service
http://blogs.technet.com/b/kevinholman/archive/2010/10/15/clustering-the-exchange-2010-correlation-engine-service.aspx
http://support.microsoft.com/kb/2592561
also the Opsmgmt logs are full of waring and error event like 2023 , 21402 , 21403 , 1207 !!
Log Name: Operations Manager
Source: HealthService
Date:
Event ID: 2023
Task Category: Health Service
Level: Warning
Keywords: Classic
User: N/A
Computer: server 1
Description:
The health service has removed some items from the send queue for management group "SCOM" since it exceeded the maximum allowed size of 15 megabytes.
1- alert from console >>
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.Windows.Server.2008.OperatingSystem.PercentMemoryUsed.Collection
Instance name: Microsoft Windows Server 2008 R2 Enterprise
EventSourceName: Health Service Modules

Office 2010 downloads too much stuff to users' roaming profiles, making it go over the 30MB size limit

Hey, we recently rolled out to Office 2010 at my workplace.
On the student segment we've activated the 30MB roaming profile size limit, and we've found that a bunch of students have had trouble with this now because Office 2010 seems to download around 8MB of files to %APPDATA%\Microsoft\Templates\LiveContent, which
occasionally makes the profile go over the 30MB size limit.
Is there any easy way to prevent this LiveContent from being downloaded?? Anything I can set in the installation transformation file, or preferably with a registry setting or something?

You had mentioned a policy to disable synchronization of the LiveContent folders.
I think it would be this GP admin template setting, it's what we use for this kind of requirement:
File Name: UserProfiles.admx
Policy Setting Name: Exclude directories in roaming profile
Scope: User
Policy Path: System\User Profiles
Registry Information: HKCU\Software\Policies\Microsoft\Windows\System!ExcludeProfileDirs
Supported On: At least Windows 2000
Help Text: This policy setting lets you exclude folders that are normally included in the user's profile.
As a result, these folders do not need to be stored by the network server on which the profile resides and do not follow users to other computers.
Note: When excluding content from the profile you should try to exclude the narrowest set of data that will address your needs.
For example, if there is one application with data that should not be roamed then add only that application's specific folder under the AppData\Roaming folder rather than all of the AppData\Roaming folder to the exclusion list.By default, the Appdata\Local
and Appdata\LocalLow folders and all their subfolders such as the History, Temp, and Temporary Internet Files folders are excluded from the user's roaming profile.In operating systems earlier than Microsoft Windows Vista, only the History, Local Settings,
Temp, and Temporary Internet Files folders are excluded from the user's roaming profile by default.If you enable this policy setting, you can exclude additional folders.If you disable this policy setting or do not configure it, only the default folders are
excluded.
Note: You cannot use this policy setting to include the default folders in a roaming user profile.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

10g Xe 4Gb data size limit

Hi All,
I have read the I can load only 4Gb data on my 10G xe database.
Is the 400Mb default allocation of system tablespace (data dictionary) included here?
I mean 4gb less 400Mb is my new data size limit?
Thanks a lot

The user data storage limit is 4 GB. 5 GB includes system tablespaces. Here is the exact text that is printed on the web page under Administration >> Storage -
+"Oracle Database Express Edition is designed to provide users with 4 GB of user data storage. Physical storage is limited to a database size of 5 GB of total overall size. This includes the system tablespace, but excludes temporary and rollback. You can compact storage by clicking Compact Storage in the Tasks list."+

"Convert Text to Table" Size limit issue?

Alphabetize a List
I’ve been using this well known work around for years.
Select your list and in the Menu bar click Format>Table>Convert Text to Table
Select one of the column’s cells (1st click selects entire table, 2nd click selects individual cell)
Open “Table Inspector” (Click Table icon at top of Pages document)
Make sure “table” button is selected, not “format” button
Choose Sort Ascending from the Edit Rows & Columns pop-up menu
Finally, click Format>Table>Convert Table to Text.
A few days ago I added items & my list was 999 items long, ~22 pages.
Tonight, I added 4 more items. Still the same # pages but now 1,003 items long.
Unable to Convert Text to Table! Tried for 45 minutes. I think there is a list length limit, perhaps 999 items?
I tried closing the document w/o any changes. Re-opening Pages & re-adding my new items to the end of the list as always & once again when I highlight list & Format>Table>Convert Text to Table .....nothing happens! I could highlight part of the list up to 999 items & leave the 4 new items unhighlighted & it works. I pasted the list into a new doc and copied a few items from the middle of the list & added them to the end of my new 999 list to make it 1003 items long (but different items) & did NOT work. I even attempted to add a single new item making the list an even 1000 items long & nope, not working. Even restarted iMac, no luck.
I can get it to work with 999 or fewer items easily as always but no way when I add even a single new item.
Anyone else have this problem? It s/b easy to test out. If you have a list of say, 100 items, just copy & repeatedly paste into a new document multiple times to get over 1,000 & see if you can select all & then convert it from text to table.
Thanks!
Pages 08 v 3.03
OS 10.6.8

G,
Yes, Pages has a table size limit, as you have discovered. Numbers has a much greater capacity for table length, so if you do your sort in Numbers you won't have any practical limitation.
A better approach than switching to Numbers for the sort would be to download, install and activate Devon Wordservice. Then you could sort your list without converting it to a table.
Jerry

Connection pool size limit error

Hi all,
I am trying to execute a BAPI function from MII, execution fails with the following message;
[ERROR] Unable to make RFC call Exception: [Problem retrieving JCO.Function object: Connection pool <ECC_Server>:800:02:EN:ECCUser is exhausted. The current pool size limit (max connections) is 1 connections.]
[WARN] [SAP_JCo_Function_0] Skipping execution of output links due to action failure.
[ERROR] Uncaught exception from SAP_JCo_Function_0, Problem retrieving JCO.Function object: Connection pool <ECC_Server>:800:02:EN:ECCUser is exhausted. The current pool size limit (max connections) is 1 connections.
Config:
1. In 'SAP MII: Connections' of type JCO and have given pool size to 100.
2. In 'SAP MII: Credential Stores' store is created and same is being used in Start Session.
3. In JCO_Function block, we can search for the Function Module and set it.
MII Version:
14.0.2 Build(82)
Am I missing something?
Has any one seen this? please advise.
Thanks,
Message was edited by: Shridhar N

Check if there is another JCo connection configured with the same IP and User. I have found in the past that even though there are two connections configured because they have the same ip and user they are put into one pool with the lowest max pool of the two connections.

Is there a way to put more apps (increase the folder size limit) in iOS 5.0.1 on iPad2

I read on some site that there is an app that allows one to increase the desktop folder size limit in iOS 5.0.1 on an iPad2 does anyone have any info please?
Thanks for any thoughts in advance.....
Dave

Firstly, Thanks for taking the time to reply :-)
It's not that I want gazillions of apps, I just wanted to put more in each folder so I don't have to have multiple folders with similar names....Weather1, 2, 3,etc.... but I see your point and appreciate the thoughts.
Dave

How do I change the attachment size limit in Calendar Server 6.3, UWC, IWC?

How do I properly increase or decrease the attachment size limit with Calendar Server and all supported user interfaces to it such as WCAP, UWC (Communications Express) and IWC (Convergence)? From my experience with the Outlook Connector, there seems to be some limit imposed by cshttpd on the size of a file upload (I believe I actually got an HTTP error code back on the wcap request indicating something was too big, sorry I don't have it handy, I'll have to re-test). Additionally, it seems UWC imposes additional limits (Example: http://docs.sun.com/app/docs/doc/819-4440/6n6jfgcjh?l=en&a=view&q=fileSizeHardLimit) but I can't seem to get those to work at all. I found many different web.xml related to UWC and I'm not sure which one to change, I tried a couple but had no success because UWC would always report this error if I uploaded between 4-5 megs: com.iplanet.jato.util.WrapperRuntimeException
Root cause = [java.io.IOException: Request cancelled because file input field
"importFile" size is over the configurable limit of 4194304 bytes; see filter init
parameter fileSizeHardLimit]
And it would complain about requestSizeLimit I think if it was over 5 megs, claiming that limit was 5242880. IWC gives a generic error when the upload is too big and rejects it.
I fear that a 4 meg limit will be too imposing and of limited value, so I would either like to raise it, or consider lowering it to 0 bytes so attachments cannot be used at all. I have been looking high and low for information on how to do this and all I can find is the UWC examples. I plan to support the Outlook Connector, UWC, and IWC so the limits should ideally be the same across each. Some of the Exchange data we wish to import does have some attachments so it would be good to continue support for that. I did see some other posts about quota RFEs but at this point I am not concerned about the disk consumption. Can anyone help? Thanks. Please let me know if there is any more information I can provide. I am running SCS6u1 on Solaris 10 SPARC.

Fred@egr wrote:
Thanks!!! This is working with IWC and I am pretty sure it will work with Outlook. I didn't think to look at config options for mshttpd since I don't have it installed and ics.conf doesn't list the http.service.maxmessagesize and service.http.maxpostsize by default.http.service.maxmessagesize is only relevant to mshttpd, not cshttpd. service.http.maxpostsize applies to both.
UWC is still limiting me though; I'm sure I can reconfigure UWC if I just know which file to edit and if I need to redeploy anything. I'm using the same install paths as the SCS6 Single Host example and I'm not sure which the "uwc-deployed-path" is supposed to be. Again, thanks.If you have deployed UWC/CE to Application Server you would edit the following file and restart application-server:
/opt/SUNWappserver/domains/domain1/generated/xml/j2ee-modules/Communications_Express/web.xml
e.g.
<filter>
    <filter-name>MultipartFormServletFilter</filter-name>
    <filter-class>com.sun.uwc.calclient.MultipartFormServletFilter</filter-class>
    <init-param>
      <param-name>fileSizeHardLimit</param-name>
      <param-value>15485760</param-value>
    </init-param>
    <init-param>
      <param-name>requestSizeLimit</param-name>
      <param-value>15485760</param-value>
    </init-param>
    <init-param>
      <param-name>fileSizeLimit</param-name>
      <param-value>15485760</param-value>
    </init-param>
</filter>Regards,
Shane.

LabView RT FTP file size limit

I have created a few very large AVI video clips on my PXIe-8135RT (LabView RT 2014). When i try to download these from the controller's drive to a host laptop (Windows 7) with FileZilla, the transfer stops at 1GB (The file size is actually 10GB).
What's going on? The file appears to be created correctly and I can even use AVI2 Open and AVI2 Get Info to see that the video file contains the frames I stored. Reading up about LVRT, there is nothing but older information which claim the file size limit is 4GB, yet the file was created at 10GB using the AVI2 VIs.
Thanks,
Robert

As usual, the answer was staring me right in the face. FileZilla was reporting the size in an odd manner and the file was actually 1GB. The vi I used was failing. After fixing it, it failed at 2GB with error -1074395965 (AVI max file size reached).

[AS3 AIR] 2880x2880 Size Limit, Camera, Filter, CameraRoll Issues & Finger Friendly Components

AS3 AIR ANDROID
I started playing with this Adobe AIR for Adroid by building an app that would let the user take a picture using the mobile device's native camera app. Then, I'm applying filter effects to make the image look cool. Then, I'm allowing the user to save the image back to the camera roll.
Here are some questions that I have:
KEEPING UP WITH CURRENT TECHNOLOGY
Are we limited to the 2880x2880 stage size limit? Although, this dimension does yield 8+megapixels, it's not in the ratio that most camera sensors are built (widescreen). Plus, you can bet that newer cameras will have even higher dimensions. Will this be updated to keep up with current technology requirements?
IMPORTING & MANIPULATING CAMERA DATA
Code
var bmpData:BitmapData = new BitmapData($loader.width, $loader.height);
bmpData.draw(DisplayObject($loader));
bmp = new Bitmap(bmpData);
bmp.width = Capabilities.screenResolutionX;
bmp.height = Capabilities.screenResolutionY;
if (CameraRoll.supportsAddBitmapData) {
    var cameraRoll:CameraRoll = new CameraRoll();
    cameraRoll.addEventListener(ErrorEvent.ERROR, onCrError);
    cameraRoll.addEventListener(Event.COMPLETE, onCrComplete);
    var savedBmpData:BitmapData = new BitmapData (bmp.width, bmp.height);
    savedBmpData.draw(DisplayObject(bmp));
    cameraRoll.addBitmapData(savedBmpData);
} else {
    trace("~" + "Camera Roll not supported for this device.");
addChild(bmp);
When you capture an image using the mobile device's camera app, you have to use the Loader object.
So, here, I am doing just that with these steps:
First, I'm creating a BitmapData object and sizing it the same as the camera image.
Pass the camera image into the BitmapData object.
Create a Bitmap object and pass in the BitmapData.
Resize it to fit on the stage.
Check for Camera Roll and then create a savedBmpData BitmapData object at the size of the screen.
Pass in the bmp.
Save it to the Camera Roll.
The problem is that when the image is displayed on the phone, it shows THE ENTIRE (uncropped) image. However, the image that is saved to the phone is only the top 800x480 corner of the image. What is wrong? How do we save an image to the Camera Roll that is larger than the display area of the phone. It seems like the only way to save the entire camera image is to resize it to fit the stage and then capture the stage into a bitmapData object.
FILTERS
If you apply any filters to the bitmapData object, the filter effects will display on the phone, but if the image is saved to the Camera Roll, then all the filters are lost and it only saves the original (unfiltered) image.
FINGER FRIENDLY UI COMPONENTS
Do they exist?
ADDITIONAL NOTES
The max image size that can be saved is 2039x2039 pixels on the HTC Evo. Anything bigger than this resulted in a CameraRoll Error #1 (which there is no documentation for what that means ANYWHERE on the web).

HT4863 How can I increase the file size limit for outgoing mail. I need to send a file that is 50MB?

How can I increase the file size limit for outgoing mail. I need to send a file that is 50MB?

You can't change it, and I suspect few email providers would allow a file that big. Consider uploading it to a service like Dropbox, then email the link allowing the recipient to download it.

FILE and FTP Adapter file size limit

Hi,
Oracle SOA Suite ESB related:
I see that there is a file size limit of 7MB for transferring using File and FTP adapter and that debatching can be used to overcome this issue. Also see that debatching can be done only for strucutred files.
1) What can be done to transfer unstructured files larger than 7MB from one server to the other using FTP adapter?
2) For structured files, could someone help me in debatching a file with the following structure.
000|SEC-US-MF|1234|POPOC|679
100|PO_226312|1234|7130667
200|PO_226312|1234|Line_id_1
300|Line_id_1|1234|Location_ID_1
400|Location_ID_1|1234|Dist_ID_1
100|PO_226355|1234|7136890
200|PO_226355|1234|Line_id_2
300|Line_id_2|1234|Location_ID_2
400|Location_ID_2|1234|Dist_ID_2
100|PO_226355|1234|7136890
200|PO_226355|1234|Line_id_N
300|Line_id_N|1234|Location_ID_N
400|Location_ID_N|1234|Dist_ID_N
999|SSS|1234|88|158
I would need a the complete data in a single file at the destination for each file in the source. If there are as many number of files as the number of batches at the destination, I would need the file output file structure be as follows:
000|SEC-US-MF|1234|POPOC|679
100|PO_226312|1234|7130667
200|PO_226312|1234|Line_id_1
300|Line_id_1|1234|Location_ID_1
400|Location_ID_1|1234|Dist_ID_1
999|SSS|1234|88|158
Thanks in advance,
RV
Edited by: user10236075 on May 25, 2009 4:12 PM
Edited by: user10236075 on May 25, 2009 4:14 PM

Ok Here are the steps
1. Create an inbound file adapter as you normally would. The schema is opaque, set the polling as required.
2. Create an outbound file adapter as you normally would, it doesn't really matter what xsd you use as you will modify the wsdl manually.
3. Create a xsd that will read your file. This would typically be the xsd you would use for the inbound adapter. I call this address-csv.xsd.
4. Create a xsd that is the desired output. This would typically be the xsd you would use for the outbound adapter. I have called this address-fixed-length.xsd. So I want to map csv to fixed length format.
5. Create the xslt that will map between the 2 xsd. Do this in JDev, select the BPEL project, right-click -> New -> General -> XSL Map
6. Edit the outbound file partner link wsdl, the the jca operations as the doc specifies, this is my example.
<jca:binding />
        <operation name="MoveWithXlate">
      <jca:operation
          InteractionSpec="oracle.tip.adapter.file.outbound.FileIoInteractionSpec"
          SourcePhysicalDirectory="foo1"
          SourceFileName="bar1"
          TargetPhysicalDirectory="C:\JDevOOW\jdev\FileIoOperationApps\MoveHugeFileWithXlate\out"
          TargetFileName="purchase_fixed.txt"
          SourceSchema="address-csv.xsd"
          SourceSchemaRoot ="Root-Element"
          SourceType="native"
          TargetSchema="address-fixedLength.xsd"
          TargetSchemaRoot ="Root-Element"
          TargetType="native"
          Xsl="addr1Toaddr2.xsl"
          Type="MOVE">
      </jca:operation> 7. Edit the outbound header to look as follows
    <types>
        <schema attributeFormDefault="qualified" elementFormDefault="qualified"
                targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/file/"
                xmlns="http://www.w3.org/2001/XMLSchema"
                xmlns:FILEAPP="http://xmlns.oracle.com/pcbpel/adapter/file/">
            <element name="OutboundFileHeaderType">
                <complexType>
                    <sequence>
                        <element name="fileName" type="string"/>
                        <element name="sourceDirectory" type="string"/>
                        <element name="sourceFileName" type="string"/>
                        <element name="targetDirectory" type="string"/>
                        <element name="targetFileName" type="string"/>
                    </sequence>
                </complexType>
            </element>
        </schema>
    </types>   8. the last trick is to have an assign between the inbound header to the outbound header partner link that copies the headers. You only need to copy the sourceDirectory and SourceGileName
    <assign name="Assign_Headers">
      <copy>
        <from variable="inboundHeader" part="inboundHeader"
              query="/ns2:InboundFileHeaderType/ns2:fileName"/>
        <to variable="outboundHeader" part="outboundHeader"
            query="/ns2:OutboundFileHeaderType/ns2:sourceFileName"/>
      </copy>
      <copy>
        <from variable="inboundHeader" part="inboundHeader"
              query="/ns2:InboundFileHeaderType/ns2:directory"/>
        <to variable="outboundHeader" part="outboundHeader"
            query="/ns2:OutboundFileHeaderType/ns2:sourceDirectory"/>
      </copy>
    </assign>you should be good to go. If you just want pass through then you don't need the native format set to opaque, with no XSLT
cheers
James

Temporary Queue BMQ size limit?

Similar Messages

Maybe you are looking for