Temporary tablespace Full error 10g RAC.

Hi All,
Can any one help me in below problem.
After migrating one of database from single node to two node RAC database. we are facing temporary tablespace full problem. The database previously have 2 GB of temporary tablespace but after moving to RAC enviornment it is filling 32 GB of space and still generate error.
Thanks & Regards
Shailendra Wanjari

FIND OUT WHO IS USING THAT TEMP.. I USE WHEN I SEE TEMP IS BEING EATEN UP...
column tablespace format a12
column username format a12
break on username nodup skip 1
select se.username
,se.sid
,su.extents
,su.blocks * to_number(rtrim(p.value)) as Space
,tablespace
,segtype
from v$sort_usage su
,v$parameter p
,v$session se
where p.name = 'db_block_size'
and su.session_addr = se.saddr
order by se.username, se.sid
/

Similar Messages

Temporary tablespaces in Oracle 10g

Hi,
I have created temporary tablespaces in Oracle 10g from the SQL prompt,but when i list the corresponding datafiles from v$datafile there tempfiles are not listed there,why is it so?
Regards,
Cherry

Hi,
Take a look in
1 - DBA_TEMP_FILES :http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96536/ch2398.htm
2 - V$TEMPFILE: http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96536/ch3225.htm
Cheers,
Marcello M.

Temporary tablespace full

My temporary tablespace is full, i dont know if i should drop the tablespace and re-cretae a new one or extend the the size of the file available

hi Olu,
You will only need to worry if you start to see errors in the alert log file. If you don't then temp being full is not an issue.
regards
alan

Apps_ts_queues tablespace full error

We had an issue last night where archive space filled and everything stopped until this morning when we cleared the disk space. Since that time we are getting the following error when opening previous requests in Apps
ORA-00604: error occurred at recursive SQL level 1
ORA-01653: unable to extend table APPLSYS.WF_JAVA_DEFERRED by 16 in tablespace APPS_TS_QUEUES
I ran
SELECT tablespace_name, sum(bytes) free FROM DBA_FREE_SPACE
group by tablespace_name;
and it doesn't show any near 0 free however it doesn't show the APPS_TS_QUEUES tablespace in that list also.
Where else can I look to see what is currently going on? If you click OK on the error it will give another about recent data etc and then open the previous service request you were trying to view.
dba_tables has 10 in the pct_free column min extent is 131072 next extent 131072 and max extent as 2147483645
Thanks

Hi,
What is the database version?
I went ahead and added another datafile to the DB but I don't feel as if that queues datafile of 4GB should have really filled completely. Has anyone experienced this or is it normal for that tablespace to grow that large?It is normal for the tablespace to grow that large, so add more space to the existing datafile(s) or new datafile(s) and see if you get the same error or not.
Regards,
Hussein

10G: TEMPORARY TABLESPACES GROUP

제품 : ORACLE SERVER
작성날짜 : 2004-05-25
10G: TEMPORARY TABLESPACES GROUP
==================================
PURPOSE
이 문서에서는 10g New Feature 인 Temporary tablespace 의 group 에 대해 알아 보도록 한다.
Explanation
10g 에서는 temporary tablespaces 에 대해 group 을 지정하여 생성할 수 있고
consumer group 을 지정하여 resource manager 와 함께 적용하여 사용이 가능하다.
다음은 Temporary tablespace group 지정을 위한 기본적이 사항이다.
1. 하나의 temporary tablespace group 은 적어도 하나의 tablespace 가 존재해야 하고
maximum number tablespace 에 대한 limit 은 정해져 있지 않다.
2. Ttemporary tablespace 와 group name 을 동일하게 지정할 수 없다.
3. Temporary tablespace group 은
     1) 한 group 에서 다른 group 으로 move 가 가능하고
     2) Group 내에서 삭제 될 수 있으며
     3) 추가적으로 add 가 가능하다.
4. Temporary tablespace group 사용으로 인해
     1) Sort 결과를 유지하여 space 낭비를 막을 수 있고
     2) 동시에 여러개의 session connect 시에도 서로 다른 temporary tablespaces 를 사용함으로써
     temporary tablespaces 의 사용을 분산 시킬 수 있다.
     3) Parallel operation 시에도 multiple temporary tablespaces 사용이 가능하다.
Example
1. GROUP1 을 지정하고 GROUP1 에 속하는 temporary tablespace LMTEMP 1 를 생성한다.
이 때 GROUP 1 을 따로 생성할 필요 없고 temporary tablespace 생성시에 지정하도록 한다.
SQL> create temporary tablespace LMTEMP 1
tempfile 'D:\ORACLE10\ORCL\temp1_01.dbf' size 50M
tablespace group GROUP1;
SQL> select * from dba_tablespace_groups;
GROUP_NAME TABLESPACE_NAME
GROUP1 LMTEMP1
2. LMTEMP2 를 GROUP1 에 새로 추가한다.
SQL> create temporary tablespace lmtemp2
tempfile 'D:\ORACLE10\ORCL\temp1_02.dbf' size 2M
tablespace group group1;
Tablespace created.
SQL> select * from dba_tablespace_groups;
GROUP_NAME TABLESPACE_NAME
GROUP1 LMTEMP1
GROUP1 LMTEMP2
3. 기존에 존재하는 LMTEMP1 를 GROUP2 로 move 한다.
SQL> alter tablespace LMTEMP1 tablespace group GROUP2 ;
Tablespace altered.
SQL> select * from dba_tablespace_groups;
GROUP_NAME TABLESPACE_NAME
GROUP2 LMTEMP1
GROUP1 LMTEMP2
4. LMTEMP1 이 속해 있던 GROUP2 에서 LMTEMP1 를 제외 시키고 다시 포함시킬 수 있다.
SQL> alter tablespace LMTEMP1 tablespace group '';
Tablespace altered.
SQL> select * from dba_tablespace_groups;
GROUP_NAME TABLESPACE_NAME
GROUP1 LMTEMP2
SQL> select tablespace_name from dba_tablespaces where contents='TEMPORARY';
TABLESPACE_NAME
TEMP
LMTEMP1
LMTEMP2
SQL> alter tablespace LMTEMP1 tablespace group GROUP1;
Tablespace altered.
5. Temporary tablespace 와 group name 을 동일하게 지정할 경우 ORA-10918 에러가 발생한다.
즉, temporary tablespace 와 group name 을 동일하게 지정이 불가능하다.
SQL> create temporary tablespace lmtemp5
tempfile 'D:\ORACLE10\ORCL\temp1_05.dbf' size 50M
tablespace group lmtemp5;
create temporary tablespace lmtemp5
ERROR at line 1:
ORA-10918: TABLESPACE GROUP name cannot be the same as tablespace name
6. 존재하던 모든 temporary tablespaces 를 drop 하게 되면 group 은 자동으로 remove 된다.
SQL> create temporary tablespace LMTEMP3
tempfile 'D:\ORACLE10\ORCL\temp1_03.dbf' size 2M
tablespace group GROUP2;
Tablespace created.
SQL> create temporary tablespace LMTEMP4
tempfile 'D:\ORACLE10\ORCL\temp1_04.dbf' size 2M
tablespace group GROUP2;
Tablespace created.
SQL> select * from dba_tablespace_groups;
GROUP_NAME TABLESPACE_NAME
GROUP1 LMTEMP1
GROUP1 LMTEMP2
GROUP2 LMTEMP3
GROUP2 LMTEMP4
SQL> drop tablespace lmtemp3 including contents and datafiles;
Tablespace dropped.
SQL> drop tablespace lmtemp4 including contents and datafiles;
Tablespace dropped.
SQL> select * from dba_tablespace_groups;
GROUP_NAME TABLESPACE_NAME
GROUP1 LMTEMP1
GROUP1 LMTEMP2
7. Group 에 user 사용이 가능하도록 지정할 수 있다.
SQL> alter user scott temporary tablespace GROUP1;
User altered.
8. Temporary tablespace group 을 database level 의 default temporary tablespace 로도 지정할 수 있다.
SQL> alter database <db_name> default temporary tablespace GROUP1;
Database altered.
만약, temporary tablespaces 가 default database temporary tablespace group 에 속해 있는경우
drop 시 ORA-10921 에러가 발생하게 된다. 즉, default temporary tablespace group 에 속해 있는 경우
drop 할 수 없다.
SQL> drop tablespace LMTEMP2 including contents and datafiles;
drop tablespace lmtemp2 including contents and datafiles
ERROR at line 1:
ORA-10921: Cannot drop tablespace belonging to default temporary tablespace
group
Reference Documents
<NOTE. 245645.1>

Hi,
Take a look in
1 - DBA_TEMP_FILES :http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96536/ch2398.htm
2 - V$TEMPFILE: http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96536/ch3225.htm
Cheers,
Marcello M.

Error : Temporary Tablespace is Empty when doing expdp/impdp

Hi all,
I was doing expdp on my oracle 10.1.0.2.0 DB on Win XP P, though the user is having a default temporary tablespace with a temp file on autoextend enabled, I got the message as...
ORA-25153: Temporary Tablespace is Empty
Then I created a new temporary tablespace for the user with 500M tempfile and autoextend enabled, then expdp went through.
Now I am doing the impdp for the same .dmp file to generate one sqlfile for the DB,
again I am facing the same error message as...
ORA-25153: Temporary Tablespace is Empty
----- PL/SQL Call Stack -----
object line object
handle number name
17FE07EC 13460 package body SYS.KUPW$WORKER
17FE07EC 5810 package body SYS.KUPW$WORKER
17FE07EC 3080 package body SYS.KUPW$WORKER
17FE07EC 3530 package body SYS.KUPW$WORKER
17FE07EC 6395 package body SYS.KUPW$WORKER
17FE07EC 1208 package body SYS.KUPW$WORKER
17ABE058 2 anonymous block
Job "CHECKUP"."SYS_SQL_FILE_FULL_02" stopped due to fatal error at 10:09
The message indicates that...
ORA-25153: Temporary Tablespace is Empty
Cause: An attempt was made to use space in a temporary tablespace with no files.
Action: Add files to the tablespace using ADD TEMPFILE command.
SO my question is every time I do any imp exp have I to add temp file in my temporary tablespace? will it not be cleared on the completion of the job?
Any advice please.

Hi Sabdar,
The result of the query is as...
SQL> SELECT * FROM DATABASE_PROPERTIES where
2 PROPERTY_NAME='DEFAULT_TEMP_TABLESPACE';
PROPERTY_NAME
PROPERTY_VALUE
DESCRIPTION
DEFAULT_TEMP_TABLESPACE
TEMP
Name of default temporary tablespace
So the default temporary tablespace is TEMP which is not having any tempfile as I cloned this DB from the primary DB, but the user I am using for the impdp is 'checkup' and the temporary tablespace for 'checkup' is 'checkup_temp1' which s having tempfile.
SO then why the impdp job is going to server's temporary tablespace instead of user's temporary tablespace.
Is there any way to get whether 'checkup_temp1' tablespace is the default temporary tablespace for 'checkup' or not?
Can I create create the user mentioning default temporary tablespace anyway because it is giving me error as...
SQL> create user suman identified by suman
2 default tablespace checkup_dflt
3 default TEMPORARY TABLESPACE checkup_temp1;
default TEMPORARY TABLESPACE checkup_temp1
ERROR at line 3:
ORA-00921: unexpected end of SQL command
Then I did ...
SQL> create user suman identified by suman
2 default tablespace checkup_dflt
3 TEMPORARY TABLESPACE checkup_temp1;
User created.
Regards

Size of temporary tablespace

Hi All ,
I try to create a temporary tablespace
1 create temporary tablespace test1
2 tempfile 'F:\datafile\test1.bdf'
3* size 500k
4 /
create temporary tablespace test1
ERROR at line 1:
ORA-03214: File Size specified is smaller than minimum required
How would we calculate the minimum size required to create a temporary tablespace ?

Hi,
You can test it by providing different sizes.
1 create temporary tablespace test1
2 tempfile 'F:\datafile\test1.bdf'
3* size 1024k
4 /
create temporary tablespace test1
ERROR at line 1:
ORA-03214: File Size specified is smaller than minimum required.
1 create temporary tablespace test1
2 tempfile 'F:\datafile\test1.bdf'
3* size 1050k
4 /
Tablespace created.
So that means file size should be greater than 1024K.
Regards
Jafar

How to set database default temporary tablespace in 8i?

SQL> alter database default temporary tablespace temp3;
alter database default temporary tablespace temp3
ERROR at line 1:
ORA-02231: missing or invalid option to ALTER DATABASE

As far as I know, in Oracle 8i, you can not set the temporary tablespace as default at the database level; rather you can set it at the user level.
SQL> alter user scott default temporary tablespace temp3;
In Oracle 8i, the created users without specifying the default temporary tablespace, those users will by default assign to SYSTEM as default temporary tablespace.
You may need to assign the temp3 temporary tablespace to all the users.
Regards,
Sabdar Syed.

TEMPORARY TABLESPACE에서, TEMPFILE을 사용할지, DATAFILE을 사용 할지 결정에 필요한 지침

제품 : ORACLE SERVER
작성날짜 : 2003-02-24
TEMPORARY TABLESPACE에서, 임시 파일을 사용할지, 데이터파일을 사용 할지 결정에 필요한 지침
===========================================================================================
PURPOSE
이 문서는, TEMPORARY TABLESPACE에서 임시 파일과 데이터파일의 차이점을
소개하는 데 목적이 있다.
Explanation
| TEMPORARY | Tablespace |
| tablespace | TEMPORARY |
| Locally | Dictionary |
| managed | managed |
| Datafiles | impossible | Y |
| Tempfiles | Y | impossible |
------------------------------------------+
다른 조합은 허용되지 않는다.
1. TEMPORARY Tablespace / Tablespace TEMPORARY 와 PERMANENT tablespace 비교
1) Tablespace TEMPORARY는 오라클 7.3 이상 버젼에서 사용가능하다.
=> Tablespace TEMPORARY는 다음과 같은 명령을 사용하여 생성한다.
CREATE TABLESPACE .. TEMPORARY
이 경우 데이터파일만을 사용한다.
2) TEMPORARY tablespac는 오라클 8i 이상 버젼에서 사용 가능하다
=> TEMPORARY tablespace는 다음과 같은 명령을 사용하여 생성한다
CREATE TEMPORARY TABLESPACE .. TEMPFILE
이 경우 tempfile만 사용할 수 있다.
3) Tablespace TEMPORARY/TEMPORARY tablespace는 DBA_TABLESPACES의
CONTENTS 값이 TEMPORARY로 나타난다.
4) Tablespace TEMPORARY/TEMPORARY tablespace 는 PERMANENT
tablespace와 다르며 (DBA_TABLESPACES.CONTENTS 값이 PERMANENT임)
permanent segment를 생성 할 수 없다. 예를 들어, permanent table이나
index, cluster, rollback segment등을 Tablespace TEMPORARY/TEMPORARY
tablespace에 생성할 수 없다.
5) Tablespace TEMPORARY/TEMPORARY tablespace 에서는, 단일한
temporary segment를 제공하며, 이 세그먼트는 다음과 같은
요구사항을 가진 모든 사용자에 의해 공유된다.
=> sort 작업에 따른 sort extents를 필요로 하는 사용자
=> GLOBAL TEMPORARY TABLE에 필요한 temporary extents
이와 같은 고유한 temporary segment는 동시에 많은 양의 sort 작업이
수행되거나, 여러 트랜잭션이 동일한 temporary table을 사용할 때,
permanent tablespace에서 작업하는 overhead를 피하고, 오라클의
공간 관리 작업의 부하를 피하는데 도움을 준다.
6) Temporary segment는 인스턴스 구동후 사용자가 sort extent나
sort run, 또는 global temporary table 생성등의 요청에 따라
자동적으로 생성된다.
7) Temporary segment는 인스턴스 shutdown시 자동적으로 drop 된다.
8) Temporary Content를 저장하는 테이블스페이스에 대한
세그먼트의 공간 할당/할당 해제 관련 정보는 V$SORT_SEGMENT와
V$SORT_USAGE 뷰를 사용하여 확인해 볼 수 있으며, sort segment
등에 현재 sort를 진행하는 사용 정보를 보여준다.
9) 위와 같은 작업을 수행하는데 PERMANENT tablespace 보다는
tablespace TEMPORARY를 사용하는 것이 유리한 점은 <Bulletin No:
11938>에 자세히 기술되어 있따.
10) 오라클 8i에서는, 사용자별 default temporary tablespace가 어떤
종류라도 상관이 없으나, PERMANENT locally managed 방식의 테이블
스페이스는 지정할 수 없다. 다음은 PERMANENT locally managed 방식의
테이블스페이스를 default temporary tablespace로 지정하여 발생하는
에러이다.
SQL> alter user x temporary tablespace PERM_LOCAL;
User altered.
SQL> select * from dba_tables order by 3,2,6,4,7,9,1,5;
select * from dba_tables order by 3,2,6,4,7,9,1,5
ERROR at line 1:
ORA-03212: Temporary Segment cannot be created in locally-managed tablespace
오라클 9i에서는 사용자별 default temporary tablespace가
어떤 TEMPORARY 타입이라도 무방하다.
=> TEMPORARY tablespace locally managed
=> tablespace TEMPORARY dictionary managed
PERMANENT locally-managed 타입의 테이블스페이스를 사용자의
TEMPORARY tablespace으로 지정할 때 다음과 같은 에러가 발생한다.
SQL> alter user x temporary tablespace PERM_LOCAL;
alter user x temporary tablespace PERM_LOCAL
ERROR at line 1:
ORA-12911: permanent tablespace cannot be temporary tablespace
2. TEMPORARY Tablespace/Tempfiles 대비 Tablespace TEMPORARY/Datafile
1) 공간관리
공간 관리는, locally managed tablespace에서 훨씬 단순하고, 또
효율적이기 때문에, TEMPORARY tablespace를 사용하는 것이
바람직하다. Local managedment 방식에서 사용 가능한 유일한
방식이 temporary tablespace 방식이다.
SQL> create tablespace temp1
2 DATAFILE '/ora/ora817/32/oradata/V817/temp1.dbf' size 100M
3 TEMPORARY
4 EXTENT MANAGEMENT LOCAL UNIFORM SIZE 128K;
create tablespace temp1
ERROR at line 1:
ORA-25144: invalid option for CREATE TABLESPACE with TEMPORARY contents
Dictionary-managed tablespace 대비 locally-managed tableapce의 장점은
<Bulletin No: 18261>에 자세히 기술되어 있다.
오라클 8i에서는, sort segment가 locally managed permanent tablespace에
생성될 수 없으므로, locally managed TEMPORARY tablespace를 사용하여야
한다.
Locally managed temporary tablespace는 tempfile을 사용하며, temporary
tablespace 바깥 데이터에 전혀 영향을 주지 않으면서, temporary tablespace
관련 데이터에 대한 redo정보가 생성되지 않는다.
이 테이블스페이스는, standby database나 read-only database에서도
사용 가능하다.
2) View
TEMPORARY tablespace 와 연관된 파일 목록은 V$TEMPFILE 과
DBA_TEMP_FILES 뷰를 통해 확인할 수 있다.
SQL> select * from dba_tablespaces;
TABLESPACE_NAME CONTENTS EXTENT_MAN
TEMP_TEMPFILE_LOCAL TEMPORARY LOCAL
TEMP_DATAFILE_DICT TEMPORARY DICTIONARY
SQL> select STATUS, ENABLED, NAME from v$tempfile;
STATUS ENABLED NAME
ONLINE READ WRITE /tcase/oradata/V901/temp_temp01.dbf
SQL> select FILE_NAME, TABLESPACE_NAME from dba_temp_files;
FILE_NAME TABLESPACE_NAME
/tcase/oradata/V901/temp_temp01.dbf TEMP_TEMPFILE_LOCAL
위 내용은 tablespace TEMPORARY 환경에서 V$DATAFILE 와
DBA_DATA_FILES를 사용하는 것에 비길 수 있다.
SQL> select STATUS, ENABLED, NAME from v$datafile;
STATUS ENABLED NAME
ONLINE READ WRITE /tcase/oradata/V901/temp_data01.dbf
SQL> select FILE_NAME, TABLESPACE_NAME from dba_data_files;
FILE_NAME TABLESPACE_NAME
/tcase/oradata/V901/temp_data01.dbf TEMP_DATAFILE_DICT
3) 권한
Temporary tablespace 또는 tablespace temporary 생성을 위해서는
CREATE TABLESPACE system privilege가 필요하다.
4) TEMPORARY Tablespace 생성
SQL> create TEMPORARY tablespace temp_tempfile_local
2 TEMPFILE '/ora/V817/temp_temp.dbf' size 100M
3 EXTENT MANAGEMENT LOCAL UNIFORM SIZE 128K;
참고: 일부 OS에서는 tempfile block이 실제 액세스 되기
전 까지 tempfile이 실제로 생성되지 않는다. 이와 같은
파일 생성 작업이 지체되어 처리 되는 것은, tempfile의
생성과 크기 조정이 신속하게 처리되는데 도움이 된다.
그러나, tempfile이 나중에 생성되더라도, 생성 가능한
충분한 디스크 공간이 있어야 하겠다.
사용중인 O/S에서 tempfile이 실제 생성되는 시점은
플랫폼별 매뉴얼에 기술되어 있다.
Tablespace TEMPORARY의 생성
SQL> create tablespace TEMP_DATAFILE_DICT
2 datafile '/tcase/oradata/V901/temp_data.dbf' size 100M
3 TEMPORARY;
Tablespace created.
5) Tempfile/Datafile 제거
a. 테이블스페이스를 drop 하기 전까지 테이블스페이스의 datafile을
제거할 수 없다.
참고: 오라클 9i에서 DROP TABLESPACE 명령에 추가된
INCLUDING CONTENTS AND DATAFILES 절을 사용하면, OS로 부터
관련 데이터파일도 삭제하는 작업을 자동화 할 수 있다.
b. Temporary tablespace로 부터 tempfile을 삭제하고, 논리 구조를
비어 있는 상태로 유지할 수 있다.
=> 오라클 8i:
SQL> alter tablespace TEMP_TEMPFILE_LOCAL
2 add tempfile '/oradata/V817/temp_temp01.dbf';
Tablespace altered.
SQL> alter database tempfile '/oradata/V817/temp_temp01.dbf'
2 drop;
Database altered.
SQL> !ls /oradata/V817/temp_temp01.dbf
/oradata/V817/temp_temp01.dbf
위 명령을 수행 한 후, tempfile을 시스템으로 부터 삭제하고,
나중에 다시 추가 시킬 수 있다.
SQL> alter tablespace TEMP_TEMPFILE_LOCAL
2 add tempfile '/oradata/V817/temp_temp01.dbf';
Tablespace altered.
=> 오라클 9i: OS 파일을 삭제 하기 위해 INCLUDING DATAFILES
절을 사용할 수 있다.
SQL> alter database tempfile '/oradata/V901/temp_temp01.dbf'
2 drop including datafiles;
Database altered.
SQL> !ls /oradata/V901/temp_temp01.dbf
/oradata/V901/temp_temp01.dbf not found
Temporary tablespace로 부터 모든 tempfile을 삭제하면,
다음과 같은 에러가 발생할 수 있다.
SQL> alter table olap.test add primary key (c);
alter table olap.test add primary key (c)
ERROR at line 1:
ORA-25153: Temporary Tablespace is Empty
ORA-25153
25153, 00000, "Temporary Tablespace is Empty"
// *Cause: An attempt was made to use space in a temporary tablespace with
// no files.
// *Action: Add files to the tablespace using ADD TEMPFILE command.
이 에러 메시지는 동시 작업 수행시 디스크를 실제 액세스 하여야
할 경우 발생하게 된다.
Example
Reference Documents
<Note:132663.1> ORA-03296 Resizing Temporary Locally Managed Tablespace
<Note:131769.1> ORA-03212 at Instance Startup
<Note:102339.1> Temporary Segments: What Happens When a Sort Occurs
<Note:160426.1> TEMPORARY Tablespaces : Tempfiles or Datafiles

OEM alert: temporary tablespace more than 100% full

Hi,
I created an event in OEM which checks tablespaces. Once in a while I'm having an alerts like:
Tablespace TEMP is 102.08% full. -339968.0 KBytes of free space remain
What to do ?

Did you do the calc yourself?
Ideally a temporary tablespace will show roughly 100% full (95-105%) at all times, using standard extent calculations. Any small amount over 100% is usually the result of rounding error, or using several independent queries and catching the reuse and realloc of segments.
The only time a temporary tablespace should show nearly empty is shortly affter restarting the instance. Once it starts getting used, the temp tablespace should get blocks used by active sessions. When a session needs an empty block, it formats that block for the purpose (sort, global tempo table, hash area, etc.) Once sessions are finished with them, the blocks are reused - for performance, blocks are not cleared (reformatted to 'empty') and therefore simply show 'being used' in a typical dba_segments/dba_extents select.
The only time to worry about it is when a session (or the system) compains about being out of temp space. In which case, make it bigger ... or figger why it needs the extra space and fiux that.

ORA-00600 Error, when Dropping one temporary tablespace

Hi,
I am using Oracle 10.1.0.2.0 on WinXPP, after I created a new temp tablespace and assigned one user to it as its temp tablespace, then trying to drop the old temp tablespace , I am getting the following Error . Can anybody pl. explain the reason.
Steps I followed as...
SYSTEM@orcl>create temporary tablespace checkup_tmp tempfile 'c:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL \CHECKUP_Tmp.dat' size 500M;
Tablespace created.
SYSTEM@orcl> alter user checkup temporary tablespace checkup_tmp;
User altered.
SYSTEM@orcl> drop tablespace CHECKUP_TEMP including contents;
drop tablespace CHECKUP_TEMP including contents
ERROR at line 1:
ORA-00600: internal error code, arguments: [krf_gen_drop_tablespace-1], [], [],
SYSTEM@orcl> drop tablespace CHECKUP_TEMP ;
drop tablespace CHECKUP_TEMP
ERROR at line 1:
ORA-00600: internal error code, arguments: [krf_gen_drop_tablespace-1], [], [],
Thanks in advance

this is the bug 3984486
consider upgrading.
the workaround seems to flashback the DB...

Error while deleting instance in 10g RAC

Hi,
I am trying to delete an instance in node 3 using DBCA. I am in node 2 and when I give username and password (Instance Management --> Delete Instance) i get the following error
"SID given in connect descriptor could not be resolved.
Connection to the database failed. Please make sure that service "xxxxxx" is registered with the listener. Username Sys has SYSDBA privleges, password is correct and then try again."
The local_listener parameter is set to the listener name.
Please provide suggestions...Its urgent.

Hello,
I think you should refer to this Doc ID: 269320.1 : Removing a Node from a 10g RAC Cluster ; this might be helpful to you. You can also try srvctl command to remove instance from the RAC and follow the instructions.
Make sure you take backup of OCR before removing the node /instances.
Can you connect from node2 to node 2 using explicit connection string, how is your tnsnames.ora configured? If not able to connect correct that issue and try again
sqlplus username/password@NODE3_INSTANCE;
Regards

Temporary Tablespace is Empty-Error Exporting

Hi,
Could any one help me in fixing the error in the following text. It is throwing the error when i tried to exp a user from the database using the system privilege.
==========================================================
EXP SYSTEM/SYSTEM@TEMP1 OWNER=CONF GRANTS=Y CONSTRAINTS=Y INDEXES=Y
Connected to: Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Export done in UTF8 character set and AL16UTF16 NCHAR character set
server uses WE8MSWIN1252 character set (possible charset conversion)
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user CONF
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user CONF
About to export CONF's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
EXP-00056: ORACLE error 25153 encountered
ORA-25153: Temporary Tablespace is Empty
ORA-06512: at "SYS.DBMS_LOB", line 424
ORA-06512: at "SYS.DBMS_METADATA", line 1140
ORA-06512: at line 1
EXP-00000: Export terminated unsuccessfully
==========================================================

See, before attempting a sort, you must add a new tempfile datafile to
the tablespace, for example: this migh work for you :-
alter tablespace temp_ro add tempfile
'/spare/sme81/oradata/jb/temp_ro.dbf' size 10m;
hare krishna
Alok

Rman backup error in 10g rac

hi,
I am backup 10g rac with rman,but there is some error when backup:
input datafile fno=00006 name=+DG1/orcl/datafile/undotbs3.265.623622323
channel c3: starting piece 1 at 13-JUN-07
RMAN-03009: failure of backup command on c1 channel at 06/13/2007 08:40:50
ORA-19504: failed to create file "/oracle/rman/db_ORCL_20070613_0fik5ji0_1_1_L0"
ORA-27040: file create error, unable to create file
Linux Error: 2: No such file or directory
channel c1 disabled, job failed on it will be run on another channel
RMAN-03009: failure of backup command on c3 channel at 06/13/2007 08:40:51
ORA-19504: failed to create file "/oracle/rman/db_ORCL_20070613_0hik5jna_1_1_L0"
ORA-27040: file create error, unable to create file
Linux Error: 2: No such file or directory
channel c3 disabled, job failed on it will be run on another channel
released channel: c1
released channel: c2
released channel: c3
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of release command at 06/13/2007 08:49:22
RMAN-06012: channel: c1 not allocated

Hi all I have the same problem. We have a 2 node rac with ASM. The archives goes to ASM. I would like to backup the archives from ASM to a filesystem. But i was given a filesystem that is only mounted on one node and it is not accessbile to the other node. When i run the following rman command i get the error on one of the channel that connect to node 2.
My question:
Can i use on channel that is connecting to node1 to backup all the archivelogs generated by node1 and node2 aswell since both the nodes have access to archive logs.
Please assist.
connect target /
connect catalog rmanrep/[email protected]
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/opt/oracle/archive/orcl/rman/cf_%d_%T_%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 2;
CONFIGURE CHANNEL 1 DEVICE TYPE DISK CONNECT 'SYS/oass@orcl1;
CONFIGURE CHANNEL 2 DEVICE TYPE DISK CONNECT 'SYS/oass@orcl2';
BACKUP CURRENT CONTROLFILE;
backup archivelog all format '/opt/oracle/archive/orcl/arch_bkup/%d_AL_%T_%u_s%s_p%p' delete input;
EXIT;
RMAN-03009: failure of backup command on ORA_DISK_2 channel at 03/17/2009 21:00:25
ORA-19504: failed to create file "/opt/oracle/archive/orcl/arch_bkup/SPTDEV_AL_20090317_2kka60j6_s84_p1"
ORA-27040: file create error, unable to create file
Linux-x86_64 Error: 2: No such file or directory
channel ORA_DISK_2 disabled, job failed on it will be run on another channel
Thanks
Kart

Although my temporary tablespace is enough space,the error occurs ORA-01652

Hello,
Although my temporary tablespace is enough space ,i am taking an error ORA-01652 and some dbfs in the tablespace are looks like as offline and it’s size looks like as 0 byte.
So that i am changing status of these datafiles to online with this command as follows;
ALTER DATABASE TEMPFILE '/QDBP/q023/q023/temp/qt_lm_tmp01.dbf' ONLINE;
Also, The disk that exist these datafiles was 0 in availibility.
When i issued the command df –k as follows
Filesystem kbytes used avail capacity Mounted on
/dev/vx/dsk/qdbpdg/volq23 20971520 20971520 0 100% /QDBP/q023
is pointed.
And then i have released space from disk
The current review is
/dev/vx/dsk/qdbpdg/volq14 157286400 21731141 127083885 15% /QDBP/q014
My queries and results are for the hint of about the problem:
SELECT A.tablespace_name TABLESPACE, D.mb_total,
SUM (A.used_blocks * D.block_size) / 1024 / 1024 mb_used,
D.mb_total - SUM (A.used_blocks * D.block_size) / 1024 / 1024 mb_free
FROM v$sort_segment A,
SELECT B.NAME, C.block_size, SUM (C.bytes) / 1024 / 1024 mb_total
FROM v$tablespace B, v$tempfile C
WHERE B.ts#= C.ts#
GROUP BY B.NAME, C.block_size
) D
WHERE A.tablespace_name = D.NAME
GROUP BY A.tablespace_name, D.mb_total;
TABLESPACE |MB_TOTAL| MB_USED| MB_FREE
QT_LM_TMP |61440 |12| 61428 --temporary
TS_TEMP_SDPA |15360 |0| 15360 –temporary
Separately,i want to see you a view about alert log like points below.
KCF: write/open error block=0x1b6e0a online=1
file=3 /QDBP/q014/q014/temp/qt_lm_tmp03.dbf
error=27063 txt: 'SVR4 Error: 28: No space left on device
Additional information: -1
Additional information: 8192'
Automatic tempfile offline due to write error on
file 3: /QDBP/q014/q014/temp/qt_lm_tmp03.dbf
With sum,i have some question like below:
1)Although there is enough space on temporary tablespace why i take error ORA-01652?
2)Although there is enough space on temporary tablespace why databasefiles have offline status suddenly?
3) is it important fully rate of disk on operating system if there is enough space on temporary tablespace which has extend properties.
Best regards
Oya YALÇIN

Hi,
i don't make tablespaces offline mode.But neverthless i don't understant although there is enough space on tablespace why tablespaces are being offline status mode itself?
When i look at ‘ select file_name,status from dba_temp_files ‘ query on the database now.The result is like below;
FILE_NAME|STATUS
/QDBP/q023/q023/temp/qt_lm_tmp01.dbf|AVAILABLE
/QDBP/q023/q023/temp/qt_lm_tmp02.dbf|AVAILABLE
/QDBP/q014/q014/temp/qt_lm_tmp03.dbf|AVAILABLE
/QDBP/q023/q023/temp/ts_temp_sdpa01.dbf|AVAILABLE
/QDBP/q023/q023/temp/ts_temp_sdpa02.dbf|AVAILABLE
/QDBP/q014/q014/temp/qt_lm_tmp04.dbf|AVAILABLE
/QDBP/q014/q014/temp/qt_lm_tmp05.dbf|AVAILABLE
But when i look at first 3 dbf by orderly from tab of scripts about tablespaces on toad tool
i see that like below;
ALTER DATABASE TEMPFILE '/QDBP/q023/q023/temp/qt_lm_tmp01.dbf' OFFLINE;
ALTER DATABASE TEMPFILE '/QDBP/q023/q023/temp/qt_lm_tmp02.dbf' OFFLINE;
ALTER DATABASE TEMPFILE '/QDBP/q014/q014/temp/qt_lm_tmp03.dbf' OFFLINE;
And their size is look like 0 .
Regards
Oya.

Temporary tablespace Full error 10g RAC.

Similar Messages

Maybe you are looking for