Term of warranty

My just-received HP 27-K151 was advertised as having a one year`warranry, but a message on my computer says my warranty expires in November.
Can anyone advise me as to what to do?

Hi:
I just had to do that with my HP 350 G1.
Purchased 2/26/15 and warranty was to expire on 12/29/15.
You should be able to enter the serial number in the submit case box and proceed from there.
http://h20566.www2.hp.com/portal/site/hpsc/public/scm/home/?ac.admitted=1426116594566.876444892.1994...

Similar Messages

  • Issue facing in warranty  of the material?-ANY IDEAS

    Hai,
           client sells their product & gives warranty ( warranty period will be,
    1) 24 months from the Date of Installation or
    2) 30 months from the Date of Manufacturing - whichever is earlier ).
    in Warranty, there is again 2 types:-
    1) within warranty period - service is free , including the transportation charges
    2) after warranty period - service will be chargeble.
    Can someone add their inputs to map in SAP.
    doubts:
    - do we need to create seperate doc type for service order ( which will be created with or w//o ref to preceeding doc) ?
    - shall i create new pricing procedure for this.
    - free service providing in Payment terms as "Warranty replacement", they not using any discounts ( so icant give 100% discount for free services ) ?
    need ur inputs,
    Edited by: SAP Consultant- on Nov 5, 2008 4:55 PM

    closing this thread as open one more thread with same query

  • Confused. Is my iPod out of warranty or not? Just got Apple Care email.

    I bought a 20gb iPod nearly 18 months ago. 6 months later the hard drive failed so i got it serviced. When it came back it was always freezing and i got so frustrated with it i left it on the shelf for a couple months.
    When i eventually got around to seeing if i could get it repaired, the online repair site said the warranty expired. Fair enough i thought i should have got it fixed again right away.
    Yesterday i check i my email and get this:
    Your one-year warranty is about to expire.
    This is your last opportunity to purchase the AppleCare Protection Plan for iPod.* For just £39 inc VAT, you get comprehensive service and support, and the chance to rock on for a long time to come
    Im confused. Does this mean i got a new one year warranty when it was repaired?
    Anyone else had their iPod repaired after more than a year of purchase but less than a year after a repair? I didnt get the full apple care but im tempted to pay the £39 then send it in for repair. Ill give apple a call on Monday but im just curious for now.

    the normal warranty is one year from date of purchase, or 90 days from date of repair, whichever gives you the longest term
    the warranty details are here...
    http://www.apple.com/legal/warranty/ipodisight.html
    but if apple says you are still covered then go for it, especially as apple failed to fix it the first time

  • Am I eligible to receive warranty services in Canada for a Hongkong bought MBA or MBP?

    As title. Thanks for the clarification.
    And how about an US bought one? Does it make any difference in terms of warranty?

    The warranty on Apple computers is an international warranty valid in other countries.  It is just the iPhone and cellular capable iPads that have restricted warranties.

  • Debating whether to get a new blackberry... common Torch issues? what happens to support/warranty if RIM goes under?

    Hi, thinking of getting a new Blackberry but I'm a bit nervous of buying into a potentially buggy phone with all the rumours of RIM going belly up.
    What have been the most typical issues with Torch, especially the newer models?
    I know with my Curve, as much as I've loved it, it is only a year old and has had problems with randomly rejecting its SIM card (new SIM card = $$$ and pain in the butt to have to go visit the store etc.), track pad stops working at times, keyboard backlight stops working at times (usually when I'm in the dark of course), and now the display is hooped.  So, maybe that extended warranty would have been worth it but since I still have to pay out the remainder of my contract on that phone before I can get new, I'm thinking that diving into another Blackberry adventure could be problematic even WITH extended warranty if support will no longer be available for it?
    On the other hand, I DON'T like the layout of iphone, and I found Blackberry to be pretty intuitive to learn and use comfortably, plus the price is right on my phone plan at the moment.  IF ongoing support is going to be available, I would prefer to stick it out with Blackberry.
    What is the latest on RIM and what is proposed in terms of warranty on new phones?

    Hi, thinking of getting a new Blackberry but I'm a bit nervous of buying into a potentially buggy phone with all the rumours of RIM going belly up.
    What have been the most typical issues with Torch, especially the newer models?
    I know with my Curve, as much as I've loved it, it is only a year old and has had problems with randomly rejecting its SIM card (new SIM card = $$$ and pain in the butt to have to go visit the store etc.), track pad stops working at times, keyboard backlight stops working at times (usually when I'm in the dark of course), and now the display is hooped.  So, maybe that extended warranty would have been worth it but since I still have to pay out the remainder of my contract on that phone before I can get new, I'm thinking that diving into another Blackberry adventure could be problematic even WITH extended warranty if support will no longer be available for it?
    On the other hand, I DON'T like the layout of iphone, and I found Blackberry to be pretty intuitive to learn and use comfortably, plus the price is right on my phone plan at the moment.  IF ongoing support is going to be available, I would prefer to stick it out with Blackberry.
    What is the latest on RIM and what is proposed in terms of warranty on new phones?

  • Warranty in PO

    Hi,
        I am creating PO template. In that under terms & conditions Warranty is there. Now im giving free text while creating PO and im displaying that text in format using READ_TEXT function. But my process owner is telling like for each material it will be different. It is not free text. Then how can i take the warranty details. please help me.

    not getting any answers here so putting this question in ABAP forum
    Thanks for seeing
    Sharat

  • Do I still have warranty?

    I have the original warranty that comes with the purchase of my 4th gen iPod touch. When I was getting out of the car, it fell out of my coat pocket and fell on the concrete. I didn't notice any initial damage at first. The only problem is that there is a dent in the metal in the upper right corner and a little of the black band between the metal and screen chipped off but no pixels, cracks on screen, or hardware is damaged. Do I still have warranty even though nothing was seriously damaged?

    - If you have an Apple store nearby, just make an appointment at their Genius Bar.
    - Regarding:
    "A random question: is it true that Apple will throw out sent in devices that don't follow the terms for warranty?"
    I think throughint it out would fialte the users right to the broken hardware.  I thin Apple would just contact the person saying the repair/replacement is not covered by the warranty and would yu like to pay for an out-or-warranty repair.  If that is declined, Apple will send the iPod back.

  • X-fi warranty informat

    How can I tell if mu X-fi is 4mb buffer or 2mb buffer as per the last post on this page: http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=26289&vie w=by_date_ascending&page=73
    I have the non-heatsinked samsung ram version if thats any help.
    Also, if it was purchased from Asia does it still have a valid warranty in Australia? (I read the FAQ and it didnt say which ones did or didnt).
    I dont have all the required information for technical support so I thought I would post here for the mean time.
    Cheers.

    I do not know what creative consider is a territory !!
    Unless I am mistaked according to european law warranties have to cover the whole of the european union and although creative's warranty staes that it is only applicable in teh country of purchase it also contains the following paragraph
    "This warranty gives You specific legal rights. You may also have other rights, which vary from state to state and country to country. Some states and countries do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to You."
    My interpretation of this paragraph is that creative's pretty draconian limitations relating to country of purchase may well be totally opposite to that which is enshrined in consumer protection law in certain countries...as an example it is possible taht a UK court will not agree with time scales in terms of warranty cover as goods have to be fit for purpose for an acceptable period which a court could well define as being longer than the two years specified by creative for the x-fi
    I advise people to seek appropriate advice in their own country before they accept creative's warranty restrictions as gospel !!

  • About the phone warranty

    sir , i bought nokia lumia 520 on 23-06-2013 from nokia priority pratapgarh , but my phone stopped working within 2 days then i visit nokia priority on 26-06-2013 to solve my problem but they were unable to solve it and they advice me to go nokia care . so sir i just want to know that what is your policy is my phone is be replaced or be repaired . please reply me as early as possible..... thank you

    Device would need to have been logged in for attention to same issue three times before phone would be replaced rather than repaired. Terms of warranty are that working device of commensurate value is provided, which shouldn't be an issue with such a new phone.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • I am looking at a MacBook pro 17 early 2011 with water damage that doesn't turn on. Now t would have a voided warranty wondered if anyone knew how much apple would charge to fix. If its worth fixing?

    I am looking at a MacBook pro 17 early 2011 with water damage that doesn't turn on. Now t would have a voided warranty wondered if anyone knew how much apple would charge to fix. If its worth fixing?

    It mostly depends on the damage that was done (the LCD, keyboard, etc) but yours does not turn on so I am assuming it was fully submerged and completely damaged. Therefore, I would think your warranty is most definitely void.
    When did this happen? How bad was it? Have you taken any measures to get it to dry? You can go online and you can find tips on how to dry it at least a bit so that it is not as bad, it might not get it to work, but it can help you prevent rusting, which would cause further damage thus reducing the probability of getting repaired/replaced. Also, do not try to turn it on unless you have tried to dry it as it will damage it even more (electricity + water = destruction). I would suggest giving this a try, and if it is still not working then it is probably worth a try with Apple, just go in for a consultation in terms of pricing. If they seem too high and/or the warranty is void, then you can opt for after-market products which significantly reduce the repair costs... as you would have nothing to lose anyway in terms of warranty.
    It's $3,000, that pays my rent. Even investing $1,000 would be better than just not giving it a try at all lol.

  • Under warranty and want to swap it from 5s to iphone 6. Is it possible?

    Under warranty and want to swap it from 5s to iphone 6. Is it possible?

    Sorry but as mentioned it will be replaced with the exact model, colour and capacity as you have at present. That is if Apple find the repairs required fall within the terms of warranty.
    Cheers
    Pete

  • Industrial Design & CAD -- Switching to Mac (Within A Company)

    Hi all.
    With the stalled global economy, our IT budget is frozen here at my company, probably for at least a year. So, what better time to ressurect my case for Macs at work to replace our Dells? If you can help, please read on...
    I'm an industrial designer in a small group (8 persons full-time in North America, with an additional 5-or-so contractors) within a large manufacturing company (3000+ employees globally). We use mainly Photoshop, Autodesk Sketchbook Pro and Illustrator as our 2D apps, which are all available for OSX. We also use Microsoft Office, and there is an OSX flavor of that, too. Unfortunately, we also use Autodesk AutoStudio, which is currently available only for Irix, Linux & Windows. I'm not even sure if it supports Vista or 64-bit. That's our main 3D app, though. A couple of virtual showroom apps, but we're more flexible on that (while we network our AutoStudio licenses, something like Autodesk's Showcase would, I believe, run just fine with a locall license under bootcamp).
    My Dell Precision 690 is a good machine, actually. What I don't care for is the "long arm of the law" our IT group has put in place in terms of how it piecemeals out applications.
    For example, I cannot open Illustrator documents out of Bridge, as one would expect. I must view the file in Bridge to know what I want, go back to Illustrator and manually search by filename. This is due to the odd installation process they've put in place here. Illustrator should be installed along with the rest of CS(2, in our case) in order to function properly, something we're unable to do with our setup. Also, I have been having major file-renaming issues with Illustrator that our IT department is both unable and unwilling to solve, as well as what appears to be an expired support contract with Adobe.
    It seems that we overpay IT for every last piece of hardware & software, with very little benefit in terms of warranty or service. One example is when we paid $1000 for a (then, now cheaper) $500 Wacom tablet. I figured that "double-the-price" setup ensured us some sort of replacement warranty, but when I did have technical problems, we paid for both the service call AND the replacement hardware. Gadzooks! Despite the perception of Macs as being more expensive than Window-boxes, not only was this Dell box I'm using pretty pricey, but all the IT charges, I'd like to think we could offer a cost improvement by "breaking out" of the system.
    So, my motivation is political. But it is also that I have a preference for OSX when it comes to networking, using Adobe applications & overall appearance (both the interface and also of my physical workspace!)...
    Anyone here ever had to make an IT case to "break away" a creative department from the parent? Any hints in terms of business case of maintenance costs of Macs vs PCs? Service contracts with Mac people? Any helpful links or books you could recommend? I've been Googling some terms with no luck.
    I think my ultimate proposal would be to keep on "company" Dells over in the (shaded, depressing) corner of the room for email & CAD work, but to use Mac Pro (or MacBook Pros) for our 2D work. Until Autodesk lists Macs as "approved hardware" on their site, we'll never convince to company to go the bootcamp route (even though I know a colleague who's been using AutoStudio on Windows on a Mac Pro 17". Says it works flawlessly).
    Anyway, any help or words of wisdom would be appreciated. Also, please feel free to share your own experiences with proposing a "switch." Things to watch out for, etc. Also, if there is another place (either here at Apple or elsewhere) you'd suggest I post, please let me know that, too. It's a bold new world, baby.
    Thanks & apologies for the length.
    -Chris H.
    ps/ Below it says I use a PowerBook G4. This is my personal computer. At work, I'm using a 2-year old...
    Dell Precision 690
    Intel Xeon CPU
    5160 @3.00 Ghz
    3 GB RAM
    Windows XP Professional, 2002 , SP2
    We have networked (floating) profiles using a locked-down flavor of XP (nothing but bright blue task bars, all day long. When it comes to Windows, I'm a "classic" man. No such luck here...).

    Hey Chris,
    I'm also an industrial designer but switched over to exhibit design from product design years ago. I was lucky to develop the dept. when the need for computers was new. (12 years ago) I went Mac all the way and we still maintain a strong Mac presence in the design dept. We have detailers still on ACAD on there PC's. Our outside IT guys are difficult to work with and high priced. The Macs never need the amount of attention the PC's get from the IT guys. We use FormZ as our 3d modeler and it exports and imports dwgs nicely. I've heard of Solidworks and Vellum for the Mac for more detailed work. Lightwave, Modo, Formz, Cinema 4D and Maxwell for renderings. (the pretty pictures that sell)
    Are you guys able to switch apps? After a few new hires to our dept, they came in w/ 3DS experience and pushed that. It was easy to say it would be a lateral move and all the money to invest in that direction would only give us the same results at the end of the day. BUT, our IT bills would have been more if we did move to the PC side. Maybe if windows7 is ok, i may load it, but have no reason too.
    I found it interesting that if you get a virus on the windows side, while using a mac, you can use TimeMachine to go back before the virus; what I was told from someone at an Apple store. I thought that was big and shocked APPLE doesn't sell that more.
    Anyway, keep us posted on your progress.
    Good luck.
    Mark

  • Can I return My Macbook To Get the Screen Fixed

    I recently discovered that my screen was cracked and I would like to return it to get fixed

    If you are asking whether Apple can and do fix or replace screens, yes they do.
    If you are asking whether it is done under terms of warranty, ... that is an issue you will have to discuss with them. Generally, a cracked screen is found to be caused by impact, which is not covered.

  • My not nice story with Nokia Booklet 3G, polish st...

    Dear Sir/Madam,
    I would like to present my story brieflywith NOKIA service- Regenersis Company (Warsaw).
    I have bought netbook Nokia Booklet 3G on 08/08/2010.I was fascinated with this machine (due to the advertisement, what later turned to be my curse, and despite the price I have bought it in EuroAGD shop, based on Lipowa Street, in Gliwice.
    I have decided to start it off a few days after (as known updates require time, and on the top of that also need good internet connection , and my internet provider was facing some difficulties these days).I realized in few minutes that WLAN connection i snot working properly ( I use home router, operating together with Windows 7 standards).My netbook was not able to connect to my internet network and others stay ,,invisible,,to it.Ommiting such a small issue, I got to conclusion :if version of the ,,Starter,, system is so poor, I will purchuase Windows7 Pro hoping it will change everything.Unfortunately, it was not the way I wished.Despite the fact I have tried to make some free space in panel, WLAN card appeared useless.I admitt I work as a driver and WiFi connection is essential for my work when abroad, as roaming prices are too high.Because of this, I have decided to complain Booklet.It is Nokia so I will not be a problem.
    First I had to find out what are where, so I called Nokia Care.I was informed my problem will be solved on the spotin any Nokia Department ( Gliwice, Chorzow or Katowice).
    How surpriced was I when Nokia Department told me totally oposite- Booklet has to be sent to Warsaw.Unfortunetely Departments are open on the week days only, and I go back to Poland on Saturdays, I have no other option than complain it at the shop.
    I started realize how difficult it is going to be on 25/09/2010 ( did not expect it would be that difficult).Well, shop manager was ,,molesting ,,me asking why I want to complain Booklet in HIS shop, while there is Nokia Department in Gliwice.I was explaining it is my business why here, thefore I said because of my working hours ( he did not mind to mention any member of my family could complain but as I wish MY complain instead of two weeks at Nokia service, will take up to one month here!
    Complain was legallu based on warranty ( which I have regreted after).
    I searched fro any infromation about my Booklet on the EuroAGD website.On 15/10/2010 I made a call to the call center and I got informed my machine is back to the shop, and the website is not updated yet.I run to the shop the same day.Stresful situation again, as shop manager looked at me, at warranty papers and opened his eyes wide.He did not know anything about my Booklet, which supposed to return from service.I was waiting over 30 minutes, trying to figure out who an why would treat me lieke a fool.
    After all they found it!Staff members foung it somewhere in the storage…I signed the papers, checked the box and…
    here it started my agony with Regeneresis Company (Warsaw)!Here comes what I have read in service report:
    ,,Dear Costumer,
    During servicing your machine ,claimed problem did not appear…( and here comes the best part)…long term tests run by out technicians did not confirm the issue.Machine works.
    I have dropped my jews!How could it work???- standard router, 100% of signal strenght, available to half of my neighbourhood but I am not able to work on my machine 4 meters from the router!There was nothing I could at the time to confirm receiving my Booklet but with the complain due to the way of proceeding the complain.I have checked the system at home (angry) and all my nerves started to be relesed…: lond term tests- all 4 minutes in total, together withseconds it takes to switch it on and off!!!
    I called Nokia on Monday: here lady on the phone completely calm informed me, she has no clue about the repair, and I need to contact with the service.
    Ok, I wrote first email to get explaination from Regeneresis- NO REPLY.Second email-STILL NO REPLY!
    Then I emailed Nokia Poland and EuroAGD.
    Then I decided to make a request to the way of servicing ( by calling Regenersis) and again was ignored. Lady on the phone told me, I should contact them via email, as she does not know any detail of servicing and contact with technician i snot possible.
    When for the THIRD time I wrote to Regenersis, claiming if I do not not get the expertise of the tests of my card I will sue them in the court, finnaly I got the answer:
    ,, We hereby apologise for any inconvieniencedue to the wrong expertise, we are very sorry to hear about not detected problem in your Booklet.We kindly request to pass your machine to the service point again.
    So all good! But I did not wish to argue with shop manager again AND wait for the nest weeks.I called Regenersis Company one more time to contact person responsible for quality control ( it took me few long calls).
    Finally , when we started the conversation I requested that they will pick michine from me and on their own cost, as I do not have time either not in mood to deal with this as they made a mistake.
    Case was closed, and I hoped this time it will be sorted out.Ho wfool was I?!
    I have received the message from Nokia Care Poland on 26/10/2010:
    ,,Concerning complain nr 88/44/2010.
    Thank you for document sent on 15/10/2010 and also 15/10/2010.In return to your complain, according to thewarranty service repair, Booklet 3G IMEI nr 35823/1030270606 by Authorized Nokia Service Center- Regenersis ( Warsaw), we would like to inform , that due to the leak of documentation it is not possible to proceed with decision.
    We also explain, that all complains due to the terms of warranty are taken under consideration after receiving copy of purchuase together with service repair copy.To check your claim in details, please fax above documents on the number below: 0225419800 or via email [email protected].,,
    It is true I did not send any scans, but all information: reports numbers, dates and so on i sent, so in th eera of telephones, computers it i snot a problem to get interested if company is providing good service and if it is in the good name of Nokia.I have dropped this after all contact I had with Complain Department of Nokia Poland. I knew it had no sense.
    I have received next reply from EuroAGD on 29/10/2010:
    ,,Dear Sir,
    In return to your message, we inform, that expertise at service did not confirm any problems in work of machine.During tests any issues did not occur. We inform complain was due to the warranty, and warranty is a legal base responsible for censiderating and decisions taken to close the complain.Seller always bases on opinions of authorized warranty service.,,
    This was not surprise!but I was just disapointed that even they were not interested to do anything about it, even when I have presented them incompetence of the service (monitor screens, where system diary was shown!).
    Courier pick up the Booklet on 25/10/2010.
    At the time I sent all screens of analize of software monitoring LAN network as well as information about another problem in Booklet!!!
    Bios started to stop to workand the whole machine slown down so drastic that to start system off was taking over 5 minutes!
    Above person once a week to get any infromation.It was taking hours.
    Next call to Regenersis and Nokia Care Poland, and this time Nokia- lady accepted a complain based on IMEI number , but nothing happened after.
    Booklet came back to me at the beginning of November, enclosinf report saying:
    ,, We inform, during servicing the repair was run according to the producent procedure.Machine works.,,
    True, Bios was working- hard discexchenged, new preinstalled Windows7 Starter, but WLAN card still not working!!!This time it cuts signal untill -55dB,in some way this was a succes but internet connection was not possible.
    Booklet went again with courier to Warsaw on 29/11/2010.This time not to be repaired but for the expertise to replace machine fro the new one.Control Department said it will take no longer than 1,5 weeks ( optymistic- I thought).
    I contacted the same person on 13/12/2010.Unfortunetely a complain cannot be done this way, so I have to do this in person in the shop, and Regenersis will send back machine together with expertise, which is already done, but I cannot receive it ( available fro the seller only).I went to the shop on 19/12/2010.I was getting upset again as shop manager said he will not accept a complain without a Booklet!Explaining that machine will arrive ditect to them and that this fact should be added in documentation gave nothing.I got strict answer:Booklet has to be brought in person, then sent to service for the expertise and with new expertise and the Booklet back, they have 14 days to consider replacement- consider does not mean I got one.
    I called Regenersis again on 20/12/2010 and explained what and why.I got information Booklet will be send the same day, and as they will receive a request from the seller, they will also send expertise vi aregistered letter.Hoping that the parcel will arrive the next day, and considerating EuroAGD procedure, these 14 days means decision would be at the begining of 2011.How wrong was I?!
    On 23/12/2011,at 09:00 my Booklet was still on the shelf in Regenersis Company (Chmas begins tomorrow, I honestly doubt that Booklet I have bought in August 2010 will get back to me in January 2011!!!
    Today, on 28/12/2011Booklet was returned to EuroAGD and sent back to Regeneris Company. And I don’t know how long its going to take again.
    Best Regards.

    Yep **bleep** in Poland are not nice! I remember times when our tourist busses, cars and so on were robbered on your roads
    Ok, I had similar problem. Solved it just after one day without any strees and extra work - just changed my old wi-fi router (because I was able to connect to my neighbors wi-fi). Simple - just try other wi-fi. Don`t try to re-bild Nokia factory in Chine, try to use compliable router. 
    My noncompliable router was Netgear with only b/g networks. Don`t remember model.

  • Intermittent scratching noise on pb 1.67 hard drive

    I've done a search on this issue and know it has been discussed, but I was not able to find anything dealing specifically with my issue.
    I have a pb 1.67 with an 80g hd that makes an intermitten whirring, actually more like a scratching sound. I've noticed that when it does it and I'm typing or opening a window, the computer hesitates. Because it's happening more and more often, it is causing my pb to run slow (hesitating task completions). Editing video, typing on Word has been an absolute hassle.
    I've contacted apple and they had me try some things: repair permissions, repair disk (found a minor repair needed on a volume header and fixed it). BTW, I've got the hard drive partitioned into two (one as an emergency hd that I keep the os and diskwarrior). I've run every utility I can think of (onyx, dw, etc) and still having issues.
    I am planning on taking it in to an apple service provider, but I was wanting some input from all of you to go into the shop a little smarter. Do I need to demand a new hard drive? I can't find the brand name of my hd otherwise I'd give it. I am concerned that my hd will go and i will lose all of my files, so I am planning on backing up this afternoon.
    Thanks for all of your help!

    Raul
    The symptoms you describe are consistent, but not exclusively, with a failing hard drive. If you have already tried other options then I would say it is more likely than not that the drive is failing.
    Therefore it is wise to backup immdiately - but make sure the backup is cloned onto an external FireWire drive that is bootable. Do not use a USB drive. Use either SuperDuper! or Carbon Copy Cloner to do the backup and make sure you test the backup afterwards by restarting from it.
    An Apple Authorised Service Provider itself does not offer a longer warranty term on any Apple product unless you are buying the AppleCare Protection Plan (which is only available for purchase within the first year of ownership).
    However an AASP can carry out an out-of-warranty repair, payable by the customer. Personally I would have no qualms in using a local AASP as some of them can be very knowledgeable. Furthermore they don't always send repair jobs back to Apple.
    In terms of warranty, only a longer warranty from the retailer that the PowerBook was purchased from will help in this situation. If the retailer did not include a longer warranty, you did not purchase any additional warranty or you don't have insurance that might cover such an event, then alas the cost of a repair will have to be met by yourself.
    Here in the UK replacing the hard drive can cost around £60-70 (for an 80GB drive) if the installation was carried out by yourself following instructions from ifixit.com (be aware it is not a simple job for a novice). On the other hand I have had an AASP charge around £50 to replace the internal hard drive. Therefore a hard drive replacement is not a prohibitively expensive job.
    15" 1.25GHz/12" 1GHz PBs, PPC Mac minis, 12" iBooks G3/G4,   Mac OS X (10.4.5)   Cube, TAMs, iPods 2G/4G, iPs, AEBS, AX

Maybe you are looking for

  • Unable to download Adobe AIR 2.6

    I get the following error message when I try to download 2.6. "Installation may not be allowed by your administrator.  Please contact your administrator." I tried to download an older version, and got the same error.  I have windows xp, ser. pack 3.

  • Text elements in Webdynpro for Abap

    Hi, Can anybody explain me how to create text element in webdynpro for abap? Regards, Soumya

  • Reader X stops working after closing PDF file

    We have a small problem on our businesscompany with Reader X. When a user opens up a PDF file (windows XP sp3) it opens ok and everything seems to be fine. After reading the user closes it. But when a user wants to open up a new PDF file, nothing hap

  • What is the best way to prepare for CERTIFICATION?

    what is the best way to prepare for CERTIFICATION? what is needed? where can i read more about it?

  • Join Between W_PERSON_F and W_POSITION_D

    Hi, I want to join W_PERSON_F fact table and W_POSITION_D dimension table. Database: Siebel DB. Is there any direct join or we want to join through some other table? Thanks, Satheesh