Terminal - sending find output to cp
I'm trying to do: find /Volumes/TMBackup/ -name *.eml
It finds what I need, however, I'm trying to get this output sent to cp so I can copy all the .eml files it finds to another folder. HOWEVER, the results returned have spaces in some of the folder names and they have not been escaped with the \ (backslash).
Some of them also have double forwardslashes like this for example:
/Volumes/TMBackup//usr/local/
I could just use Find in Finder, but all the .eml files are stored in /usr which is hidden from the OS. Moreover, the folder I'm trying to search needs sudo to be used in front of the command, or just su'ing to root.
Any help will be very much appreciated. I'm very frustrated by this and it is holding up a data restore.
Thanks!
Message was edited by: TC10284
I'd hazard a guess that you're doing it wrong
How are you trying to "get this output sent to cp"? not via a pipe, I hope, because if so, that's your problem.
From your description it sounds like you're best served via find's -exec switch which tells it to execute a command for each found item. -exec has no issues with files that contain spaces, e.g.:
sudo find /Volumes/TMBackup/ -name *.eml -exec cp {} /path/to/dest \;
This will happily copy all found files to /path/to/dest, even if the filenames contain spaces (note, though, that this will collapse the directory hierarchy, so /Volumes/TMBackup/file1.eml will be copied, and then replaced by /Volumes/TMBackup/subdir/file1.eml since the copy just copies the file from wherever it's found to the destination directory - it doesn't preserve the intermediate /subdir structure. This may or may not be a problem for you, depending on your goals.
Similar Messages
-
Sending report output to Excel
Dear buddies
I'm using OLE Object in my report to send its output to excel. I find this way from an example at the same forum. But I feel that this example is for very small sized reports which have to send a few cells to excel because in this method we've to map each boiler plate and data field to excel like this.
function B_DEPTNOFormatTrigger return boolean is
begin
RPT2XLS.put_cell(1, 'DEPTNO', FontColor => 10, FontSize => 8, FontStyle => RPT2XLS.BOLD);
RPT2XLS.new_line;
return (TRUE);
end;
In this way its very hard to map large reports to excel which have more than 50 or 60 data fields and labels. So is there any short way to send its output to excel. Be careful that I also dont wanna use Delimited option coz Delimited file has also to be formatted while importing to Excel. Is there anyway that OLE Object should automatically detect all my Report Labels and fields or some other solution in yours minds???If you are using 10g reports you can use the latest parameter desformat=spreadsheet
Rajesh Alex -
Error when sending report output to printer from Forms 10g
Hi,
I have a simple report that I am running from a form using run_report_object built-in. I can successfully send the report output to a file but when I send the report output to a printer my report is
terminated with report status of 'TERMINATED_WITH_ERROR'. I am using the default forms service and reports server that comes with the forms builder. How do I specify the reports server to user my default network printer ?Following is the code that runs my report.
Thanks,
Anna
PROCEDURE SEND_TO_PRINTER IS
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(50);
rep_server system_variables.reports_server%type;
alldone exception;
BEGIN
select reports_server
into rep_server
from system_variables;
if rep_server is null then
msg_alert('Error getting the reports server name', 'I', FALSE);
raise alldone;
end if;
:ctrl.run_report_errors := 'N';
repid := find_report_object('REP_OBJ1');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,rep_server);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
IF :ctrl.rg_print = 'P' THEN
--Send the output to printer.
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,PRINTER);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'dflt');
ELSIF :ctrl.rg_print = 'R' THEN
--Rich Text Format
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,FILE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'rtf');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,:ctrl.filename);
END IF;
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
null;
ELSE
:ctrl.run_report_errors := 'Y';
msg_alert('Error when running report.' || rep_status, 'I', FALSE);
END IF;
EXCEPTION
when no_data_found then
msg_alert('Error getting the reports server name', 'I', FALSE);
when alldone then
null;
END;If you use Windows the user that runs the reports server is usually LocalSystem. Check this in the Windows Services panel.
LocalSystem has no printer access. To be able to print, you have to use a real domain user that has access to the printer. So, change the Log on properties in the Services panel. -
Error while sending PO output through mail in PDF format - Urgent
Dear friends,
Developed program to send sapscript output through mail in pdf format, the program running properly, even function module SO_NEW_DOCUMENT_ATT_SEND_API1 returning sy-subrc 0. But the external mail is not going to user lying in SAP outbox with message <b>"Wait for communications service"</b> . SCOT is properly configured, tested mails sending through SAP office.
Find below the source code:
REPORT zmm_porder_gm
NO STANDARD PAGE HEADING.
TABLES: ekko, ekpa, t161t, t052, komv, j_1imocomp, t001, esll.
Internal Tables
DATA : txt LIKE tline-tdline, "HEADER LINE
your_ref LIKE ekko-ihrez, "your ref
our_ref LIKE ekko-unsez, "our ref
mcompname LIKE t001-butxt,
itemname LIKE ekpo-txz01,
del_text LIKE tline-tdline, "delivery text
mat_po_text LIKE tline-tdline. "material po text
DATA: g_ind TYPE i.
DATA: it_esll LIKE esll OCCURS 0 WITH HEADER LINE.
DATA: sub_packno LIKE esll-sub_packno.
DATA : po_flag(1) TYPE c.
DATA : it_erev LIKE erev OCCURS 0 WITH HEADER LINE.
DATA : nmebeln LIKE thead-tdname,
obj LIKE thead-tdname.
DATA : tline LIKE tline OCCURS 0 WITH HEADER LINE. "HEADER TEXT
DATA : it_ekko LIKE ekko OCCURS 0 WITH HEADER LINE.
DATA : it_ekpo LIKE ekpo OCCURS 0 WITH HEADER LINE.
DATA : it_zmm_porder LIKE zmm_porder OCCURS 0 WITH HEADER LINE.
DATA : it_konv LIKE konv OCCURS 0 WITH HEADER LINE.
DATA : it_konv_ftr LIKE konv OCCURS 0 WITH HEADER LINE.
DATA : it_konv_rate LIKE konv OCCURS 0 WITH HEADER LINE.
DATA : it_komv_tax LIKE komv OCCURS 0 WITH HEADER LINE. " For Tax Calculation
DATA : it_zmm_house_bank LIKE zmm_house_bank OCCURS 0 WITH HEADER LINE.
*DATA : mrate TYPE konv-kbetr VALUE 0, mrate1(15). rmoved by ganes and added following logic
DATA : mrate TYPE p VALUE 0 DECIMALS 2, mrate1(15).
DATA : mrate_gm TYPE p DECIMALS 2.
DATA : BEGIN OF it_konv1 OCCURS 0,
knumv LIKE konv-knumv,
kschl LIKE konv-kschl,
END OF it_konv1.
DATA : BEGIN OF it_t052u OCCURS 0.
INCLUDE STRUCTURE t052u.
DATA : END OF it_t052u.
DATA : mpay_terms LIKE t052u-text1.
DATA : mwaers LIKE konv-waers.
DATA : BEGIN OF xt052 OCCURS 0.
INCLUDE STRUCTURE t052.
DATA : END OF xt052.
DATA : it_t16ct LIKE t16ct OCCURS 0 WITH HEADER LINE.
DATA : BEGIN OF ztext OCCURS 0.
INCLUDE STRUCTURE ttext.
DATA : END OF ztext.
DATA : it_t001 LIKE t001 OCCURS 0 WITH HEADER LINE.
DATA : mtext(15) TYPE c.
DATA : it_adrc LIKE adrc OCCURS 0 WITH HEADER LINE.
DATA : it_adrc_ven LIKE adrc OCCURS 0 WITH HEADER LINE.
DATA : it_adrc_plt LIKE adrc OCCURS 0 WITH HEADER LINE.
DATA : it_makt LIKE makt OCCURS 0 WITH HEADER LINE.
DATA : it_eket LIKE eket OCCURS 0 WITH HEADER LINE. " Schedulling
DATA : it_eikp LIKE eikp OCCURS 0 WITH HEADER LINE. " Export
DATA : it_t001w LIKE t001w OCCURS 0 WITH HEADER LINE.
DATA : it_t685t LIKE t685t OCCURS 0 WITH HEADER LINE.
DATA : it_t618t LIKE t618t OCCURS 0 WITH HEADER LINE.
DATA : it_t685t_ftr LIKE t685t OCCURS 0 WITH HEADER LINE.
DATA : it_lfa1 LIKE lfa1 OCCURS 0 WITH HEADER LINE.
DATA : it_bapi_mltx_ga LIKE bapi_mltx_ga OCCURS 0 WITH HEADER LINE. "Material long text
DATA : mfirst TYPE i VALUE 0,
mpay_flag(1) TYPE c VALUE 'X',
mwerks LIKE t001w-werks,
msr TYPE i VALUE 0,
l_rate TYPE p DECIMALS 2 VALUE 0,
l_amt TYPE p DECIMALS 2 VALUE 0,
mflag(1) TYPE c,
mlctr TYPE i VALUE 0,
mfamt TYPE p DECIMALS 2 VALUE 0,
mcfamt(15) TYPE c,
mfword(100) TYPE c,
mkschl LIKE konv-kschl,
mchgamt TYPE p DECIMALS 2 VALUE 0,
mkbetr TYPE p DECIMALS 2 VALUE 0,
mkwert TYPE p DECIMALS 2 VALUE 0.
DATA : j_1iexcd TYPE j_1imocomp-j_1iexcd,
j_1icstno TYPE j_1imocomp-j_1icstno,
j_1ilstno TYPE j_1imocomp-j_1ilstno.
DATA : mjmop_r TYPE p DECIMALS 2 VALUE 0,
mjmoq_r TYPE p DECIMALS 2 VALUE 0,
mjecs_r TYPE p DECIMALS 2 VALUE 0,
mjvcs_r TYPE p DECIMALS 2 VALUE 0,
mjvrd_r TYPE p DECIMALS 2 VALUE 0,
mjsep_r TYPE p DECIMALS 2 VALUE 0.
DATA : mjmop_a TYPE p DECIMALS 2 VALUE 0,
mjmoq_a TYPE p DECIMALS 2 VALUE 0,
mjecs_a TYPE p DECIMALS 2 VALUE 0,
mjvcs_a TYPE p DECIMALS 2 VALUE 0,
mjvrd_a TYPE p DECIMALS 2 VALUE 0,
mjsep_a TYPE p DECIMALS 2 VALUE 0.
DATA : mtitle LIKE t161t-batxt.
DATA : no_ammend(10),request_by(50),ver_txt(100),ver_reason(100),stext(200).
begin of Email data declarations**************
DATA: BEGIN OF otf OCCURS 0.
INCLUDE STRUCTURE itcoo .
DATA: END OF otf.
DATA: itcpo LIKE itcpo.
DATA: itcpp LIKE itcpp.
DATA: it_docs TYPE STANDARD TABLE OF docs,
v_bin_filesize TYPE i,
it_lines TYPE STANDARD TABLE OF tline,
wa_lines TYPE tline.
DATA : i_pdf LIKE tline OCCURS 1000 WITH HEADER LINE,
v_pdf_bytecount TYPE i,
v_pdf_spoolid TYPE tsp01-rqident,
v_otf_pagecount TYPE i,
v_btc_jobname TYPE tbtcjob-jobname,
v_btc_jobcount TYPE tbtcjob-jobcount.
DATA: objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE.
DATA: objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
DATA: doc_chng LIKE sodocchgi1.
DATA: tab_lines LIKE sy-tabix.
DATA: vafilename(100) VALUE 'po_output.pdf'.
DATA: jobdata TYPE sxjobdata.
DATA arc_params TYPE arc_params.
DATA print_params TYPE pri_params.
DATA g_send_prog TYPE syrepid VALUE 'ZVF03_TEST_PROG'.
DATA immediate TYPE btcchar1.
DATA: i_jobname TYPE tbtcp-jobname,
i_jobcount TYPE tbtcp-jobcount,
i_jobstepcount TYPE tbtcp-stepcount.
DATA recipient_obj LIKE swotobjid.
CONSTANTS: sx_true TYPE sx_boolean VALUE 'X'.
TABLES: tbtcp.
end of Email data declarations**************
SELECTION-SCREEN : BEGIN OF BLOCK block1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : mebeln FOR ekko-ebeln OBLIGATORY . " 75
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 12.
SELECTION-SCREEN COMMENT (20) text-b01.
PARAMETERS: b1 AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN : END OF BLOCK block1.
SELECTION-SCREEN: BEGIN OF SCREEN 200 TITLE text-001 AS WINDOW.
PARAMETERS : p_email TYPE ad_smtpadr. "E-Mail Address
SELECTION-SCREEN: END OF SCREEN 200.
INITIALIZATION.
SET PF-STATUS 'ZMMPORD_STAT'.
AT SELECTION-SCREEN.
CASE sy-ucomm.
WHEN 'EMAIL'.
PERFORM zemail.
WHEN '&IC1'.
PERFORM load_data.
PERFORM process.
IF NOT p_email IS INITIAL.
PERFORM send_mail.
ENDIF.
ENDCASE.
*START-OF-SELECTION.
PERFORM load_data.
PERFORM process.
FORM load_data .
DATA : gindex LIKE sy-tabix.
SELECT * FROM t16ct INTO TABLE it_t16ct WHERE spras = 'EN'.
SELECT * FROM ekko INTO TABLE it_ekko WHERE ebeln IN mebeln.
IF sy-subrc EQ 0.
SELECT * FROM erev INTO CORRESPONDING FIELDS OF TABLE it_erev FOR ALL ENTRIES IN it_ekko
WHERE edokn = it_ekko-ebeln AND rscod <> '' .
SORT it_erev BY edokn revno DESCENDING.
LOOP AT it_ekko.
IF NOT ( it_ekko-frgke EQ 'O' OR it_ekko-frgke EQ '0' ) .
MESSAGE e000(zsd) WITH 'Purchase Order is not Realeased'.
ENDIF.
ENDLOOP.
SELECT * FROM ekpo INTO TABLE it_ekpo WHERE ebeln IN mebeln.
IF sy-subrc EQ 0.
SELECT * INTO TABLE it_makt
FROM makt
FOR ALL ENTRIES IN it_ekpo
WHERE matnr EQ it_ekpo-matnr.
SELECT * INTO TABLE it_lfa1
FROM lfa1
FOR ALL ENTRIES IN it_ekko
WHERE lifnr EQ it_ekko-lifnr.
ENDIF.
SELECT *
INTO TABLE it_t052u
FROM t052u
FOR ALL ENTRIES IN it_ekko
WHERE zterm EQ it_ekko-zterm
AND spras EQ 'EN'.
IF sy-subrc EQ 0.
SORT it_t052u BY zterm.
ENDIF.
SELECT * FROM eket INTO TABLE it_eket WHERE ebeln IN mebeln.
IF sy-subrc EQ 0.
SORT it_eket BY ebeln ebelp.
ENDIF.
SELECT *
INTO TABLE it_eikp
FROM eikp
FOR ALL ENTRIES IN it_ekko
WHERE exnum EQ it_ekko-exnum.
IF sy-subrc EQ 0.
SORT it_eikp BY exnum.
SELECT *
INTO TABLE it_t618t
FROM t618t
FOR ALL ENTRIES IN it_eikp
WHERE expvz EQ it_eikp-expvz
AND spras EQ 'E'
AND land1 EQ 'IN'.
IF sy-subrc EQ 0.
SORT it_t618t BY expvz.
ENDIF.
ENDIF.
REFRESH : it_zmm_porder.
CLEAR : it_zmm_porder.
SELECT * INTO TABLE it_zmm_porder
FROM zmm_porder
WHERE flag EQ 'L'.
IF sy-subrc EQ 0.
SORT it_zmm_porder BY kschl.
ENDIF.
SELECT * FROM konv INTO TABLE it_konv
FOR ALL ENTRIES IN it_ekko
WHERE knumv = it_ekko-knumv
AND kwert NE 0.
LOOP AT it_konv.
gindex = sy-tabix.
READ TABLE it_zmm_porder WITH KEY kschl = it_konv-kschl BINARY SEARCH.
IF sy-subrc NE 0.
DELETE it_konv INDEX gindex.
ENDIF.
ENDLOOP.
IF sy-subrc EQ 0.
SORT it_konv BY knumv kherk kschl.
ENDIF.
REFRESH : it_zmm_porder.
CLEAR : it_zmm_porder.
SELECT * INTO TABLE it_zmm_porder
FROM zmm_porder
WHERE flag EQ 'F'.
IF sy-subrc EQ 0.
SORT it_zmm_porder BY kschl.
ENDIF.
SELECT * INTO TABLE IT_KONV_FTR FROM KONV
FOR ALL ENTRIES IN IT_EKKO
WHERE KNUMV = IT_EKKO-KNUMV
AND ( KSCHL = 'ZIN1'
OR KSCHL = 'ZIN2'
OR KSCHL = 'ZINS'
OR KSCHL = 'ZPF1'
OR KSCHL = 'ZPF2'
OR KSCHL = 'ZPF3'
OR KSCHL = 'ZPKG'
OR KSCHL = 'ZPKF'
OR KSCHL = 'FRA1'
OR KSCHL = 'FRB1'
OR KSCHL = 'FRC1'
OR KSCHL = 'FRD1'
OR KSCHL = 'FRD2'
OR KSCHL = 'FRD3'
OR KSCHL = 'FRD4'
OR KSCHL = 'FRD5'
*****Added one condition type below ZFBC as on 05.06.2007 :Rajiv as per mail of Sadiq via mathew sir(RTDK906646)
OR KSCHL = 'ZFBC' )
AND KWERT NE 0
AND KPOSN GT '000000'.
AND ( KRECH = 'B' " RTDK906167
OR KRECH = 'A' ).
SELECT * INTO TABLE it_konv_ftr FROM konv
FOR ALL ENTRIES IN it_ekko
WHERE knumv = it_ekko-knumv
AND kwert NE 0
AND kposn GT '000000'.
LOOP AT it_konv_ftr.
gindex = sy-tabix.
READ TABLE it_zmm_porder WITH KEY kschl = it_konv_ftr-kschl BINARY SEARCH.
IF sy-subrc NE 0.
DELETE it_konv_ftr INDEX gindex.
ENDIF.
ENDLOOP.
IF it_konv_ftr[] IS NOT INITIAL.
SORT it_konv_ftr BY knumv kschl.
ENDIF.
SELECT KNUMV KSCHL INTO CORRESPONDING FIELDS OF TABLE IT_KONV1 FROM KONV
FOR ALL ENTRIES IN IT_EKKO
WHERE KNUMV = IT_EKKO-KNUMV
and kherk = 'D'
AND ( KSCHL = 'ZIN1'
OR KSCHL = 'ZIN2'
OR KSCHL = 'ZINS'
OR KSCHL = 'ZPF1'
OR KSCHL = 'ZPF2'
OR KSCHL = 'ZPF3'
OR KSCHL = 'ZPKG'
OR KSCHL = 'ZPKF'
OR KSCHL = 'FRA1'
OR KSCHL = 'FRB1'
OR KSCHL = 'FRC1'
OR KSCHL = 'FRD1'
OR KSCHL = 'FRD2'
OR KSCHL = 'FRD3'
OR KSCHL = 'FRD4'
OR KSCHL = 'FRD5'
*****Added one condition type below ZFBC as on 05.06.2007 :Rajiv as per mail of Sadiq via mathew sir(RTDK906646)
OR KSCHL = 'ZFBC' )
AND KWERT NE 0.
AND ( KRECH = 'B' RTDK906167
OR KRECH = 'A' ).
SELECT knumv kschl INTO CORRESPONDING FIELDS OF TABLE it_konv1 FROM konv
FOR ALL ENTRIES IN it_ekko
WHERE knumv = it_ekko-knumv
AND kwert NE 0.
DELETE ADJACENT DUPLICATES FROM it_konv1 COMPARING knumv kschl.
LOOP AT it_konv1.
gindex = sy-tabix.
READ TABLE it_zmm_porder WITH KEY kschl = it_konv1-kschl BINARY SEARCH.
IF sy-subrc NE 0.
DELETE it_konv1 INDEX gindex.
ENDIF.
ENDLOOP.
IF sy-subrc EQ 0.
SORT it_konv1 BY knumv kschl.
ENDIF.
SELECT * INTO TABLE it_t685t
FROM t685t
FOR ALL ENTRIES IN it_konv
WHERE kschl EQ it_konv-kschl
AND kappl EQ it_konv-kappl
AND spras EQ 'E'.
SELECT * INTO TABLE it_t685t_ftr
FROM t685t
FOR ALL ENTRIES IN it_konv_ftr
WHERE kschl EQ it_konv_ftr-kschl
AND kappl EQ it_konv_ftr-kappl
AND spras EQ 'E'.
it_t685t_ftr-kschl = 'JVCS'.
it_t685t_ftr-vtext = 'IN CST in vat'.
APPEND it_t685t_ftr.
SELECT * INTO TABLE it_zmm_house_bank
FROM zmm_house_bank
WHERE ebeln IN mebeln.
ELSE.
MESSAGE e899(mm) WITH 'Data not found for selection criteria...'.
ENDIF.
ENDFORM. " Load_data
FORM process .
DATA : mctr TYPE i VALUE 1.
DATA : gindex LIKE sy-tabix.
DATA : mline(75) TYPE c.
DATA : mlifn2 LIKE ekpa-lifn2.
DATA : mv_name LIKE lfa1-name1,
madrnr LIKE lfa1-adrnr.
CLEAR itcpo.
itcpo-tdgetotf = 'X'.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
form = 'ZMM_PORDER'
language = sy-langu
OPTIONS = itcpo
dialog = ' '
EXCEPTIONS
OTHERS = 1.
LOOP AT it_ekko.
CALL FUNCTION 'START_FORM'
EXPORTING
form = 'ZMM_PORDER'.
SELECT SINGLE *
FROM t001
INTO it_t001
WHERE bukrs EQ it_ekko-bukrs.
mcompname = it_t001-butxt.
TRANSLATE mcompname TO UPPER CASE.
Document Type
SELECT SINGLE batxt
INTO mtitle
FROM t161t
WHERE bstyp EQ 'F'
AND spras EQ 'E'
AND bsart EQ it_ekko-bsart.
REFRESH it_adrc.
SELECT SINGLE werks
INTO mwerks
FROM ekpo
WHERE ebeln EQ it_ekko-ebeln.
SELECT SINGLE *
INTO it_t001w
FROM t001w
WHERE werks EQ mwerks.
REFRESH it_adrc.
SELECT SINGLE *
INTO it_adrc_plt
FROM adrc
WHERE addrnumber EQ it_t001w-adrnr.
REFRESH : xt052.
mfamt = 0.
msr = 0.
in 500c this statement failed.
SELECT SINGLE * FROM T052 INTO XT052 WHERE ZTERM = IT_EKKO-ZTERM.
CALL FUNCTION 'FI_TEXT_ZTERM'
EXPORTING
I_T052 = XT052
TABLES
T_ZTEXT = ZTEXT.
As per Preeti... Shipment address should be shown on top as purchase order company address. 27.04.
PERFORM writeform USING 'PLANT' 'PLANT'.
SELECT SINGLE name1 adrnr
INTO (mv_name,madrnr)
FROM lfa1
WHERE lifnr EQ it_ekko-lifnr.
REFRESH it_adrc[].
CLEAR it_adrc[].
FREE it_adrc[].
SELECT SINGLE *
INTO it_adrc_ven
FROM adrc
WHERE addrnumber EQ madrnr.
READ TABLE it_lfa1 WITH KEY lifnr = it_ekko-lifnr.
PERFORM writeform USING 'VENDOR' 'VENDOR'.
Shipment
SELECT SINGLE werks
INTO mwerks
FROM ekpo
WHERE ebeln EQ it_ekko-ebeln.
up to 1 rows.
SELECT SINGLE *
INTO it_t001w
FROM t001w
WHERE werks EQ mwerks.
SELECT SINGLE j_1iexcd j_1icstno j_1ilstno
INTO (j_1iexcd,j_1icstno,j_1ilstno)
FROM j_1imocomp
WHERE werks = mwerks.
REFRESH it_adrc.
SELECT SINGLE *
INTO it_adrc
FROM adrc
WHERE addrnumber EQ it_t001w-adrnr.
PERFORM writeform USING 'SHIPMNT' 'SHIPMNT'.
READ TABLE it_eikp WITH KEY exnum = it_ekko-exnum.
IF sy-subrc EQ 0.
READ TABLE it_t618t WITH KEY expvz = it_eikp-expvz.
ENDIF.
your_ref = it_ekko-ihrez.
our_ref = it_ekko-unsez.
READ TABLE it_erev WITH KEY edokn = it_ekko-ebeln.
IF sy-subrc = 0.
no_ammend = it_erev-revno.
request_by = it_erev-crnam.
ver_txt = it_erev-txz01.
READ TABLE it_t16ct WITH KEY rscod = it_erev-rscod.
IF sy-subrc = 0.
ver_reason = it_t16ct-rstxt.
ELSE.
ver_reason = ''.
ENDIF.
ELSE.
no_ammend = ''.
request_by = ''.
ver_txt = ''.
ver_reason = ''.
ENDIF.
PERFORM writeform USING 'PO_INFO' 'PO_INFO'.
IF it_zmm_house_bank[] IS NOT INITIAL.
READ TABLE it_zmm_house_bank INDEX 1.
PERFORM writeform USING 'BANKDTL' 'BANKDTL'.
ENDIF.
PERFORM writeform USING 'HDR_INFO' 'HDR_INFO'.
PERFORM writeform USING 'BRK_TTL' 'MAIN'.
msr = 1.
mlctr = 1.
*added by ganesh to prevent deleted items to appear in print out
LOOP AT IT_EKPO WHERE EBELN EQ IT_EKKO-EBELN.
LOOP AT it_ekpo WHERE ebeln EQ it_ekko-ebeln AND loekz NE 'L'.
*end of change
CLEAR: mrate, mrate1.
SELECT * FROM konv INTO TABLE it_konv_rate
WHERE knumv EQ it_ekko-knumv
AND kposn EQ it_ekpo-ebelp
AND ( kschl EQ 'PBXX' OR kschl EQ 'PB00' OR kschl EQ 'P001' ).
LOOP AT it_konv_rate.
IF it_konv_rate-kpein > 0. " added by ganesh as per sudhir 12.10.2007
mrate_gm = it_konv_rate-kbetr / it_konv_rate-kpein.
mrate = mrate + mrate_gm. " added by ganesh as per sudhir 12.10.2007
ELSE.
mrate = mrate + it_konv_rate-kbetr.
ENDIF.
IF it_konv_rate-waers IS NOT INITIAL.
mwaers = it_konv_rate-waers.
ENDIF.
ENDLOOP.
For Japanies Yen "RTDK906759
IF it_ekko-waers = 'JPY'.
mrate = mrate * 100.
ENDIF.
End for japanies Yen
mrate1 = mrate.
End rate
mfirst = 0.
MFAMT = MFAMT + ( IT_EKPO-NETPR * IT_EKPO-MENGE ).
mfamt = mfamt + ( mrate * it_ekpo-menge ).
PERFORM get_mat_long_text.
DATA: lt_ctr TYPE i VALUE 0,lt_ctr1 TYPE i, lt_count TYPE i VALUE 0. " Long text counter
DESCRIBE TABLE it_bapi_mltx_ga LINES lt_count.
CLEAR it_bapi_mltx_ga.
*Added by Rajiv 10.05.2007 Read and if condition RTDK906165
READ TABLE it_konv WITH KEY knumv = it_ekko-knumv
kposn = it_ekpo-ebelp.
mkbetr = 0.
mkwert = 0.
IF sy-subrc EQ 0.
LOOP AT it_konv WHERE knumv EQ it_ekko-knumv
AND kposn EQ it_ekpo-ebelp.
IF it_konv-krech EQ 'A'.
mkbetr = it_konv-kbetr / 10.
ELSE.
mkbetr = it_konv-kbetr.
ENDIF.
For Japanies Yen "RTDK906759
IF it_ekko-waers = 'JPY'.
mkbetr = mkbetr * 100.
ENDIF.
End for japaies Yen
IF mkbetr LT '0'.
mkbetr = mkbetr * ( -1 ).
ENDIF.
mkwert = it_konv-kwert.
For Japanies Yen "RTDK906759
IF it_ekko-waers = 'JPY'.
mkwert = mkwert * 100.
ENDIF.
End for japaies Yen
mfamt = mfamt + mkwert.
IF mkwert LT '0'.
mkwert = mkwert * ( -1 ).
ENDIF.
IF it_ekpo-matnr IS INITIAL.
itemname = it_ekpo-txz01.
ELSE.
READ TABLE it_makt WITH KEY matnr = it_ekpo-matnr.
itemname = it_makt-maktx.
ENDIF.
READ TABLE it_t685t WITH KEY kschl = it_konv-kschl BINARY SEARCH.
READ TABLE it_eket WITH KEY ebeln = it_ekpo-ebeln
ebelp = it_ekpo-ebelp BINARY SEARCH.
IF mfirst EQ 0.
PERFORM writeform USING 'BRK_INFO' 'MAIN'.
mfirst = 1.
ELSE.
ADD 1 TO lt_ctr.
CLEAR it_bapi_mltx_ga.
READ TABLE it_bapi_mltx_ga INDEX lt_ctr. "For long text
IF sy-subrc NE 0.
CLEAR it_bapi_mltx_ga.
ENDIF.
PERFORM writeform USING 'BRK_INFO1' 'MAIN'.
ENDIF.
mlctr = mlctr + 1.
ENDLOOP. " it_konv.
ELSE.
IF it_ekpo-matnr IS INITIAL.
itemname = it_ekpo-txz01.
ELSE.
READ TABLE it_makt WITH KEY matnr = it_ekpo-matnr.
itemname = it_makt-maktx.
ENDIF.
READ TABLE IT_T685T WITH KEY KSCHL = IT_KONV-KSCHL BINARY SEARCH.
READ TABLE it_eket WITH KEY ebeln = it_ekpo-ebeln
ebelp = it_ekpo-ebelp BINARY SEARCH.
mfirst = 0.
IF mfirst EQ 0.
PERFORM writeform USING 'BRK_INFO' 'MAIN'.
mfirst = 1.
ELSE.
ADD 1 TO lt_ctr.
CLEAR it_bapi_mltx_ga.
READ TABLE it_bapi_mltx_ga INDEX lt_ctr. "For long text
IF sy-subrc NE 0.CLEAR it_bapi_mltx_ga.ENDIF.
PERFORM writeform USING 'BRK_INFO1' 'MAIN'.
ENDIF.
ENDIF.
*Commented by rajiv 10.05.2007 used this code in above condition.
added by ganesh on 260407 to print record
if it_konv is initial.
READ TABLE IT_MAKT WITH KEY MATNR = IT_EKPO-MATNR.
READ TABLE IT_T685T WITH KEY KSCHL = IT_KONV-KSCHL BINARY SEARCH.
READ TABLE IT_EKET WITH KEY EBELN = IT_EKPO-EBELN
EBELP = IT_EKPO-EBELP BINARY SEARCH.
mFirst = 0.
if mFirst eq 0.
PERFORM WRITEFORM USING 'BRK_INFO' 'MAIN'.
mFirst = 1.
else.
add 1 to lt_ctr.
clear it_bapi_mltx_ga.
read table IT_BAPI_MLTX_GA index lt_ctr. "For long text
if sy-subrc ne 0.clear it_bapi_mltx_ga.endif.
PERFORM WRITEFORM USING 'BRK_INFO1' 'MAIN'.
Endif.
endif.
end of change
REFRESH it_komv_tax.
PERFORM get_tax_cal USING it_ekpo-ebeln
it_ekpo-ebelp.
Changing it_komv_tax.
REFRESH : it_zmm_porder.
CLEAR : it_zmm_porder.
SELECT * INTO TABLE it_zmm_porder
FROM zmm_porder
WHERE flag EQ 'T'.
IF sy-subrc EQ 0.
SORT it_zmm_porder BY kschl.
ENDIF.
LOOP AT it_komv_tax.
gindex = sy-tabix.
READ TABLE it_zmm_porder WITH KEY kschl = it_komv_tax-kschl BINARY SEARCH.
IF sy-subrc NE 0.
DELETE it_komv_tax INDEX gindex.
ENDIF.
ENDLOOP.
LOOP AT it_komv_tax WHERE kwert IS NOT INITIAL.
IF ( IT_KOMV_TAX-KSCHL EQ 'JMOP' OR
IT_KOMV_TAX-KSCHL EQ 'JECS' OR
IT_KOMV_TAX-KSCHL EQ 'JSEP' OR
IT_KOMV_TAX-KSCHL EQ 'JMOQ' OR
IT_KOMV_TAX-KSCHL EQ 'JVCS' OR
IT_KOMV_TAX-KSCHL EQ 'JVRD' OR
IT_KOMV_TAX-KSCHL EQ 'JMIP' OR
* IT_KOMV_TAX-KSCHL EQ 'JEIP' OR
IT_KOMV_TAX-KSCHL EQ 'JSEI' OR
IT_KOMV_TAX-KSCHL EQ 'JSRT' OR
IT_KOMV_TAX-KSCHL EQ 'JEC3' OR
IT_KOMV_TAX-KSCHL EQ 'JVRN' )
AND IT_KOMV_TAX-KWERT IS NOT INITIAL.
SELECT SINGLE vtext
INTO mtext
FROM t685t
WHERE kschl EQ it_komv_tax-kschl
AND spras EQ 'E'.
l_rate = it_komv_tax-kbetr / 10.
l_amt = it_komv_tax-kwert.
For Japanies Yen "RTDK906759
IF it_ekko-waers = 'JPY'.
l_amt = l_amt * 100.
ENDIF.
End for japaies Yen
ADD l_amt TO mfamt.
IF lt_ctr LT lt_count. "Long text
ADD 1 TO lt_ctr.
READ TABLE it_bapi_mltx_ga INDEX lt_ctr.
ELSE.
CLEAR it_bapi_mltx_ga.
ENDIF.
IF l_rate EQ 0 OR l_amt EQ 0.
l_rate = ''.
l_amt = ''.
ENDIF.
PERFORM writeform USING 'TAX_LINE_ITEM' 'MAIN'.
ENDIF.
ENDLOOP.
IF lt_ctr LT lt_count.
DATA mbal_line TYPE i.
mbal_line = ( lt_count - lt_ctr ).
DO mbal_line TIMES.
ADD 1 TO lt_ctr.
READ TABLE it_bapi_mltx_ga INDEX lt_ctr.
IF sy-subrc = 0.
PERFORM writeform USING 'LTEXT' 'MAIN'.
ENDIF.
ENDDO.
ENDIF.
CONCATENATE it_ekko-ebeln it_ekpo-ebelp INTO nmebeln.
REFRESH tline.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = 'F04'
language = sy-langu
name = nmebeln
object = 'EKPO'
TABLES
lines = tline
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
LOOP AT tline.
IF tline-tdline IS NOT INITIAL.
del_text = tline-tdline.
ENDIF.
CONDENSE del_text.
ENDLOOP.
CONCATENATE it_ekko-ebeln it_ekpo-ebelp INTO nmebeln.
REFRESH tline.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = 'F03'
language = sy-langu
name = nmebeln
object = 'EKPO'
TABLES
lines = tline
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
refresh.
CLEAR : po_flag, mat_po_text.
LOOP AT tline.
IF tline-tdline IS NOT INITIAL.
MOVE tline-tdline TO mat_po_text.
CONDENSE mat_po_text.
PERFORM writeform USING 'MTRL_PO_TEXT' 'MAIN'.
po_flag = 'X'.
CLEAR : mat_po_text.
ENDIF.
ENDLOOP.
*Added lines below for Schedule delivery for line item on 09.05.2007:Rajiv
CLEAR g_ind.
READ TABLE it_eket WITH KEY ebeln = it_ekpo-ebeln
ebelp = it_ekpo-ebelp BINARY SEARCH.
g_ind = sy-tabix.
LOOP AT it_eket FROM g_ind.
IF it_eket-ebeln EQ it_ekpo-ebeln AND it_eket-ebelp = it_ekpo-ebelp.
PERFORM writeform USING 'SCHEDULE' 'MAIN'.
ELSE.
EXIT.
ENDIF.
ENDLOOP.
*End Addition:Rajiv
PERFORM writeform USING 'REQSLP' 'MAIN'.
mlctr = mlctr + 1.
msr = msr + 1.
CLEAR: lt_ctr, lt_ctr1.
following lines added by ganesh to add service po details as per Mr. sadiq 21.08.2007
IF it_ekpo-packno IS NOT INITIAL.
CLEAR sub_packno.
SELECT SINGLE sub_packno INTO sub_packno FROM esll WHERE packno = it_ekpo-packno.
IF sub_packno IS NOT INITIAL.
CLEAR it_esll.
REFRESH it_esll.
SELECT * FROM esll INTO CORRESPONDING FIELDS OF TABLE it_esll
WHERE packno = sub_packno.
IF sy-subrc = 0.
PERFORM writeform USING 'SERVICE_PO_TEXT' 'MAIN'.
ENDIF.
LOOP AT it_esll.
CONCATENATE sub_packno it_esll-introw INTO obj.
CALL FUNCTION 'READ_TEXT' "4500002446 C300
EXPORTING
id = 'LTXT'
language = sy-langu
name = obj
object = 'ESLL'
TABLES
lines = tline
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
CLEAR stext.
LOOP AT tline.
CONCATENATE stext tline-tdline INTO stext SEPARATED BY space.
ENDLOOP.
FREE tline.
CLEAR tline.
REFRESH tline.
PERFORM writeform USING 'SERVICE_PO' 'MAIN'.
PERFORM writeform USING 'SERVICE_TEXT' 'MAIN'.
ENDLOOP.
ENDIF.
ENDIF.
end of change
ENDLOOP. " it_ekpo.
IF mlctr < 15.
DO 5 TIMES.
PERFORM writeform USING 'LINEFEED' 'MAIN'.
ENDDO.
ENDIF.
added by ganesh for allding line before ECC No.
IF it_ekko-bsart NE 'ZIM'. " IF EXPORT NO NEED TO PRINT ECC.
PERFORM writeform USING 'LIN' 'MAIN'.
PERFORM writeform USING 'WERKS_TAX_DETAIL' 'MAIN'.
ENDIF.
end of change
MFLAG = 'Y'.
PERFORM writeform USING 'TERMS_VAL' 'MAIN'.
LOOP AT it_konv1 WHERE knumv EQ it_ekko-knumv.
mkschl = it_konv1-kschl.
mchgamt = 0.
LOOP AT it_konv_ftr WHERE knumv EQ it_konv1-knumv
AND kschl EQ mkschl.
mchgamt = mchgamt + it_konv_ftr-kwert.
ENDLOOP.
For Japanies Yen "RTDK906759
IF it_ekko-waers = 'JPY'.
mchgamt = mchgamt * 100.
ENDIF.
End for japaies Yen
mfamt = mfamt + mchgamt.
IF mchgamt LT '0'.
mchgamt = mchgamt * ( -1 ).
ENDIF.
READ TABLE it_t685t_ftr WITH KEY kschl = mkschl.
PERFORM writeform USING 'TERMS_FTR_VAL' 'MAIN'.
mlctr = mlctr + 1.
ENDLOOP.
mflag = 'T'.
CALL FUNCTION 'HR_IN_CHG_INR_WRDS'
EXPORTING
amt_in_num = mfamt
IMPORTING
amt_in_words = mfword
EXCEPTIONS
data_type_mismatch = 1
OTHERS = 2.
CONDENSE mebeln.
nmebeln = it_ekko-ebeln.
REFRESH tline.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = 'F01'
language = sy-langu
name = nmebeln
object = 'EKKO'
TABLES
lines = tline
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
*---- CHANGED BY MATHEW BECAUSE THIS STATMENT WORKING FINE IN 300 BUT NOT IN 500C.
LOOP AT ZTEXT.
IF ZTEXT-TEXT1 IS NOT INITIAL.
PERFORM WRITEFORM USING 'TERMS_COND_VAL_PAY' 'MAIN'.
ENDIF.
MPAY_FLAG = 'Y'.
ENDLOOP.
READ TABLE it_t052u WITH KEY zterm = it_ekko-zterm.
LOOP AT it_t052u WHERE zterm EQ it_ekko-zterm.
IF it_t052u-text1 IS NOT INITIAL.
PERFORM writeform USING 'TERMS_COND_VAL_PAY' 'MAIN'.
ENDIF.
mpay_flag = 'Y'.
ENDLOOP.
PERFORM writeform USING 'TERMS_COND_VAL' 'MAIN'.
LOOP AT tline.
IF tline-tdline IS NOT INITIAL.
PERFORM writeform USING 'TERMS_COND_VAL_HDR' 'MAIN'.
ENDIF.
CONDENSE txt.
ENDLOOP.
PERFORM writeform USING 'FTR' 'FTR_LIN3'.
PERFORM writeform USING 'FTR_LIN1' 'FTR_LIN1'.
CALL FUNCTION 'END_FORM'.
ENDLOOP. " It_ekko.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT = itcpp
RDI_RESULT =
TABLES
otfdata = otf
EXCEPTIONS
unopened = 1
bad_pageformat_for_print = 2
send_error = 3
spool_error = 4
codepage = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " Process
*& Form WRITEFORM
text
-->P_0150 text
-->P_0151 text
FORM writeform USING value(p_0150)
value(p_0151).
CALL FUNCTION 'WRITE_FORM'Hi
I think some basis related configuartions to be done
Try like this and inform me
A cyclic job runs, which processes the messages seen in the SOST queue.
Are you sure it's not the frequency of the cyclic job, rather than the
number of messages in the queue, that you are observing? In messages
that are queued and before the cyclic job runs, "wait for comm. service"
is the normal status.
If you mean that there are always 4 items queued in SOST regardless of
the cyclic send job, then I have no ideas. I would have thought there
was no way to do that.
when the send job runs it just never
picks them up & sends them, while it picks up many others. The send job
is somehow blind to these; no error message occurs. In this case, I
'delete' them from the queue (in SOST) and then 'undelete' (drop down
menu -> /Go to /Deleted Items) them and then re-queue them. THEN they
actually get picked up & sent when the next cyclic send job executes.
Regards
Pavan -
Sending ALV output to the SAP Inbox.
Hi
I'm using SAP report <b>sendlist_bcs</b> for sending report output to the SAP inbox but attachment is not getting delivered.
Can anybody help to resolve the issue...
My report is:
*& Report ZTTEST_SAGAR
REPORT ZTTEST_SAGAR.
*& Report SENDLIST_BCS
*& Sample report from note 190669 for sending lists via SAPconnect
*& using the BCS interface
*& Note:
*& 1. Set a commit work statement after the sending
*& 2. Give binary data of type x not type c to send module, i.e.
*& use structure solix instead of soli and give it to tables
*& parameter contents_hex instead of contents_bin
*& Do this by filling contents_hex directly from the module
*& table_compress. In case of reading the data from spool, convert
*& to solix using so_solitab_to_solixtab
*& 3. Don't calculate document size. It is done internally
*report sendlist_bcs no standard page heading message-id so.
selection-screen begin of block mode with frame title text-001.
parameters: submit radiobutton group mode default 'X'.
parameters: write radiobutton group mode .
parameters: spool radiobutton group mode.
selection-screen end of block mode.
global data
data g_list_content type solix_tab.
data g_text_content type soli_tab.
data sysid(10) TYPE C.
*---- start-of-selection -
start-of-selection.
perform create_text_content changing g_text_content.
perform create_list_content changing g_list_content.
perform send using g_text_content
g_list_content.
a commit work has to be set somewhere after the sending!
commit work.
Form routines *
*& Form create_list_content
form create_list_content changing list_content type solix_tab.
1st possibility - use "submit <report> exporting list to memory"
if submit = 'X'.
perform use_submit changing list_content.
endif.
2nd possibility - create a new list within this report.
if write = 'X'.
perform write_a_list changing list_content.
endif.
3rd possibility - get list from spool
if spool = 'X'.
perform get_list_from_spool changing list_content.
endif.
endform. "create_list_content
*& Form create_text_content
form create_text_content changing text_content type soli_tab.
append 'This is the first line' to text_content. "#EC NOTEXT
append 'This is the second line' to text_content. "#EC NOTEXT
convert the content from RAW to TXT
call function 'SO_RAW_TO_RTF'
tables
objcont_old = text_content
objcont_new = text_content
exceptions
others = 0.
endform. "create_text_content
*& Form SEND
form send using text_content type soli_tab
list_content type solix_tab.
data send_request type ref to cl_bcs.
data text type bcsy_text.
data document type ref to cl_document_bcs.
data recipient type ref to if_recipient_bcs.
data bcs_exception type ref to cx_bcs.
data sent_to_all type os_boolean.
try.
create the send request
send_request = cl_bcs=>create_persistent( ).
create the document with attachments
main document
append 'Hi,' to text.
append 'attached you will find the list.' to text.
document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = text
i_subject = 'ABAPlist' ).
add text attachment to document
document->add_attachment( i_attachment_type = 'TXT'
i_attachment_subject = text-002
i_att_content_text = text_content ).
add list attachment to document
document->add_attachment( i_attachment_type = 'ALI'
i_attachment_subject = text-003
i_att_content_hex = list_content ).
add document to send request
send_request->set_document( document ).
sysid = sy-sysid.
data : uname type ad_uname.
uname = 'USTZZSKAZI'.
create recipient and add to send request
recipient = cl_cam_address_bcs=>CREATE_RML_ADDRESS( i_syst = sysid
i_client = sy-mandt
i_username = uname ).
send_request->add_recipient( i_recipient = recipient ).
send
sent_to_all = send_request->send( i_with_error_screen = 'X' ).
if sent_to_all = 'X'.
message s022.
endif.
catch cx_bcs into bcs_exception.
message e865 with bcs_exception->error_type.
endtry.
endform. "send
*& Form USE_SUBMIT
form use_submit changing contents_hex type solix_tab.
data listobject type table of abaplist.
get the list object by calling the list in another report
F1 on submit gives more information
submit balvsd03 exporting list to memory and return.
import the list from memory and store it in table listobject
call function 'LIST_FROM_MEMORY'
tables
listobject = listobject
exceptions
not_found = 1
others = 2.
if sy-subrc <> 0.
message e105 with 'LIST_FROM_MEMORY'.
endif.
free memory
call function 'LIST_FREE_MEMORY'
tables
listobject = listobject
exceptions
others = 1.
if sy-subrc <> 0.
message e105 with 'LIST_FREE_MEMORY'.
endif.
it's always necessary to compress the table.
SAPconnect will decompress it
call function 'TABLE_COMPRESS' "#EC *
tables
in = listobject
out = contents_hex
exceptions
compress_error = 1
others = 2.
if sy-subrc <> 0.
message e105 with 'TABLE_COMPRESS'.
endif.
endform. " USE_SUBMIT
*& Form WRITE_A_LIST
form write_a_list changing contents_hex type solix_tab.
data listobject type table of abaplist.
perform write_list.
Save the list and store table listobject
call function 'SAVE_LIST'
exporting
list_index = sy-lsind
tables
listobject = listobject
exceptions
list_index_invalid = 1.
if sy-subrc = 1.
message e105 with 'SAVE_LIST'.
endif.
It's always necessary to compress the table
SAPconnect will decompress it
call function 'TABLE_COMPRESS' "#EC *
tables
in = listobject
out = contents_hex
exceptions
compress_error = 1
others = 2.
if sy-subrc <> 0.
message e105 with 'TABLE_COMPRESS'.
endif.
endform. " WRITE_A_LIST
*& Form GET_LIST_FROM_SPOOL
form get_list_from_spool changing contents_hex type solix_tab.
data spool_number type rspoid.
data contents_bin type soli_tab.
data print_parameters type pri_params.
data valid type c.
write a list into spool
call function 'GET_PRINT_PARAMETERS'
importing
out_parameters = print_parameters
valid = valid
exceptions
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
others = 4.
if sy-subrc <> 0.
message e105 with 'GET_PRINT_PARAMETERS'.
elseif valid is initial.
return.
endif.
new-page print on parameters print_parameters no dialog.
perform write_list.
new-page print off.
spool_number = sy-spono.
you can also send OTF documents from spool with this function
module. The importing parameter real_type gives you the doc type
that you have to give to the send interface. The parameter is not
used here
call function 'RSPO_RETURN_SPOOLJOB'
exporting
rqident = spool_number
tables
buffer = contents_bin
exceptions
no_such_job = 1
job_contains_no_data = 2
selection_empty = 3
no_permission = 4
can_not_access = 5
read_error = 6
type_no_match = 7
others = 8.
if sy-subrc <> 0.
message e105 with 'RSPO_RETURN_SPOOLJOB'.
endif.
convert to hex table
call function 'SO_SOLITAB_TO_SOLIXTAB'
exporting
ip_solitab = contents_bin
importing
ep_solixtab = contents_hex.
endform. " GET_LIST_FROM_SPOOL
*& Form WRITE_LIST
form write_list.
data lt_scarr type table of scarr.
data carr type scarr.
select * from scarr into table lt_scarr.
format color = 1.
uline at /1(46).
write: / sy-vline,
'CARRID', 10 sy-vline,
'CARRNAME', 35 sy-vline,
'CURRCODE', 46 sy-vline.
format color = 2.
uline at /1(46).
loop at lt_scarr into carr.
write: / sy-vline,
carr-carrid, 10 sy-vline,
carr-carrname, 35 sy-vline,
carr-currcode, 46 sy-vline.
endloop.
uline at /1(46).
new-line.
endform. " WRITE_LIST
Thanks,
sagarhi Sagar
'SO_NEW_DOCUMENT_ATT_SEND_API1' function module for that.
Example::::
Data Declaration
data pdf like tline occurs 0.
data : objbin like solisti1 occurs 0 with header line.
Data: docdata like sodocchgi1,
objpack like sopcklsti1 occurs 1 with header line,
objhead like solisti1 occurs 1 with header line,
objtxt like solisti1 occurs 10 with header line,
objbin like solisti1 occurs 10 with header line,
objhex like solix occurs 10 with header line,
reclist type table of SOMLRECI1 with header line.
Data: listobject like abaplist occurs 1 with header line.
data : objhex2 like objhex occurs 0 with header line.
Data: tab_lines type i,
doc_size type i,
att_type like SOODK-OBJTP.
data: ls_drao like drao occurs 0,
i_data like drao-orblk occurs 0,
ls_doc_file like dms_doc_file,
ls_draw like draw.
data: begin of i_data occurs 0,
orbkl like drao-orbkl,
orblk like drao-orblk,
end of i_data.
data: w_data like i_data,
w_data2 type drao-orbkl,
wa_drao type drao.
DATA: t_error(1) type c.
DATA: t_return like BAPIRET2.
*ls_draw-mandt = '200'.
ls_draw-dokar = 'GPO'.
ls_draw-doknr = 'Z10'.
ls_draw-dokvr = '00'.
ls_draw-doktl = '000'.
ls_draw-dttrg = 'SAP-SYSTEM'.
ls_draw-dAPPL = 'DOC'.
ls_doc_file-fileno = '1'.
ls_doc_file-dttrg = 'SAP-SYSTEM'.
*Debug the cv03n transaction to see how the FMs are used
CALL FUNCTION 'CV120_DOC_CHECKOUT_TO_TABLE'
EXPORTING
PS_COUT_DEF =
ps_doc_file = ls_doc_file
ps_draw = LS_DRAW
tables
PT_DRAZ =
ptx_content = ls_drao
PTX_DRAOZ =
EXCEPTIONS
ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at ls_drao into wa_drao.
move: wa_drao-orblk to w_data-orblk.
append w_data to i_data.
endloop.
OBJPACK-HEAD_START = 1.
DESCRIBE TABLE i_data LINES TAB_LINES.
CALL FUNCTION 'ZOUTPUT_X_TABLESIZE_CHG'
EXPORTING
IV_APPEND = ' '
IV_BYTE_MODE = 'X'
IV_STRING =
IV_XSTRING =
IMPORTING
EV_SIZE =
EV_LINES =
EV_STRING =
EV_XSTRING =
TABLES
IT_DATA = i_data
ET_DATA = objhex
EXCEPTIONS
NOENTRIES = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at objhex.
move-corresponding objhex to objhex2.
append objhex2.
endloop.
docdata-obj_name = 'TEST_ALI'.
docdata-obj_descr = 'Test including ALI/HTML Attachment'.
Main Text
objtxt = 'Test Document.'.
append objtxt.
objtxt = 'You will find an ALI/HTML attachment '.
append objtxt.
objtxt = 'Have a nice day.'.
append objtxt.
Write Packing List (Main)
describe table objtxt lines tab_lines.
read table objtxt index tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + strlen( objtxt ).
clear objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
append objpack.
Create Message Attachment
Write Packing List (Attachment)
att_type = 'PDF'.
describe table objhex lines tab_lines.
read table objhex index tab_lines.
objpack-doc_size = ( tab_lines ) * 255 ."+ strlen( i_data ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT1'.
objpack-obj_descr = 'Attached Document1'.
append objpack.
Second attachment
loop at objhex.
move-corresponding objhex to objhex2.
append objhex2.
endloop.
*att_type = 'DOC'.
*describe table objhex lines tab_lines.
*read table objhex index tab_lines.
*objpack-doc_size = ( tab_lines ) * 255 ."+ strlen( i_data ).
*objpack-transf_bin = 'X'.
*objpack-head_start = 1.
*objpack-head_num = 0.
*objpack-body_start = 1.
*objpack-body_num = tab_lines.
*objpack-doc_type = att_type.
*objpack-obj_name = 'ATTACHMENT2'.
*objpack-obj_descr = 'Attached Document2'.
*append objpack.
Third attachment
*loop at objhex.
move-corresponding objhex to objhex2.
append objhex2.
*endloop.
*att_type = 'PDF'.
*describe table objhex lines tab_lines.
*read table objhex index tab_lines.
*objpack-doc_size = ( tab_lines ) * 255 ."+ strlen( i_data ).
*objpack-transf_bin = 'X'.
*objpack-head_start = 1.
*objpack-head_num = 0.
*objpack-body_start = 1.
*objpack-body_num = tab_lines.
*objpack-doc_type = att_type.
*objpack-obj_name = 'ATTACHMENT3'.
*objpack-obj_descr = 'Attached Document3'.
*append objpack.
Create receiver list
data: reclist1 type sadrfd .
reclist1-rec_fax = '650-467-2890'.
reclist1-REC_STATE = 'US'.
append reclist1.
*read table reclist1 index 1.
move reclist1(30) to reclist-receiver(30).
move reclist1346(3) to reclist-receiver346(3).
*reclist-receiver = reclist1."'US16503457900'.
*move reclist1-rec_fax to reclist-receiver.
*reclist-receiver = 'US16502796630'. "'+1 (16502796999)'.
reclist-REC_type = 'F'.
*reclist-country = 'US'.
*reclist-COM_TYPE = 'TELFAX'.
*reclist-fax = 'US1650-279-6630'.
append reclist.
*reclist-receiver = sy-uname. "<-- change internal user
*reclist-rec_type = 'B'.
*append reclist.
Send Message
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X' "used from rel.6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
tables
packing_list = objpack
OBJECT_HEADER = objhead
CONTENTS_BIN = objbin
CONTENTS_TXT = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
OBJECT_PARB =
receivers = reclist
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8
IF sy-subrc <> 0.
message ID 'SO' TYPE 'S' NUMBER '023'
with docdata-obj_name.
ENDIF.
**Please reward suitable points***
With Regards
Navin Khedikar -
I need to send the output of report as a mial
hi all,
how can i send the output of an ALV GRID as a mail ...
the visibilty of this GRID is good.
and at the same time if i use the FM 'SO_DOCUMENT_SEND_API1'
its being sent as an attachment,which i need to send jus a mail...not as an attachment.
kindly reply me ASAPREPORT YMS_SENDMAILREPORT NO STANDARD PAGE HEADING.
TABLES: DRAD,
QINF,
DRAW,
SOUC,
SOFD,
DRAP.
DATA: P_RETURN_CODE LIKE SY-SUBRC.
data: d_username LIKE DRAP-PRNAM.
* mail declarations
DATA : BEGIN OF NEW_OBJECT_ID. " the newly created email object
INCLUDE STRUCTURE SOODK.
DATA : END OF NEW_OBJECT_ID.
DATA : BEGIN OF FOLDER_ID. " the folder id of the outbox
INCLUDE STRUCTURE SOODK.
DATA : END OF FOLDER_ID.
DATA : BEGIN OF REC_TAB OCCURS 5. " the table which will contain the
INCLUDE STRUCTURE SOOS1. " information on the destination
DATA : END OF REC_TAB.
DATA : BEGIN OF OBJECT_HD_CHANGE. " the table which contains the
INCLUDE STRUCTURE SOOD1. " info for the object we will be
DATA : END OF OBJECT_HD_CHANGE. " creating
DATA : OBJECT_TYPE LIKE SOOD-OBJTP. " the type of object
DATA : BEGIN OF OBJHEAD OCCURS 5. " the header of the object
INCLUDE STRUCTURE SOLI.
DATA : END OF OBJHEAD.
DATA : BEGIN OF OBJCONT OCCURS 0. " the contents of the object
INCLUDE STRUCTURE SOLI. " i.e. the text etc
DATA : END OF OBJCONT.
DATA : BEGIN OF OBJPARA OCCURS 5. " formatting options
INCLUDE STRUCTURE SELC.
DATA : END OF OBJPARA.
DATA : BEGIN OF OBJPARB OCCURS 5. " formatting options
INCLUDE STRUCTURE SOOP1.
DATA : END OF OBJPARB.
DATA : BEGIN OF T_MAIL_TEXT OCCURS 0, "Message table for messages to
STRING(255), "user via mailbox
END OF T_MAIL_TEXT.
Parameter: p_uname like sy-uname.
**START-OF-SELECTION
START-OF-SELECTION.
d_username = p_uname.
PERFORM POPULATE_EMAIL_TEXT.
PERFORM SETUP_TRX_AND_RTX_MAILBOXES USING P_RETURN_CODE.
PERFORM CREATE_AND_SEND_MAIL_OBJECT.
* FORM POPULATE_EMAIL_TEXT *
* Inserts text for email message *
FORM POPULATE_EMAIL_TEXT.
CLEAR T_MAIL_TEXT-STRING. "puts a blank line in
APPEND T_MAIL_TEXT.
APPEND T_MAIL_TEXT.
* adds failed list on to end of success list.
T_MAIL_TEXT-STRING = 'Test email message line 1'.
APPEND T_MAIL_TEXT.
T_MAIL_TEXT-STRING = 'Test email message line 1'.
APPEND T_MAIL_TEXT.
CLEAR T_MAIL_TEXT-STRING. "puts a blank line in
APPEND T_MAIL_TEXT.
T_MAIL_TEXT-STRING = 'Header1 Header2 Header3'.
APPEND T_MAIL_TEXT.
T_MAIL_TEXT-STRING = '------------ ------------ ------------'.
APPEND T_MAIL_TEXT.
ENDFORM.
*& Form SETUP_TRX_&_RTX_MAILBOXES
* Ensure that the mailboxes of the sender (INTMGR) are set up OK
FORM SETUP_TRX_AND_RTX_MAILBOXES USING P_RETURN_CODE.
* get the user no of the sender in order to add the mail to the
* user name's outbox for future reference
SELECT SINGLE * FROM SOUC
WHERE SAPNAM = SY-UNAME. "SAP name of a SAPoffice user
IF SY-SUBRC NE 0.
"Error finding the SAPoffice user info for the user
MESSAGE E064(ZR53) WITH SY-UNAME.
P_RETURN_CODE = 1.
EXIT.
ENDIF.
*Get the outbox No for the sender from the user No where the folder
" type is an outbox
SELECT * FROM SOFD WHERE OWNTP = SOUC-USRTP "Owner type from ID
AND OWNYR = SOUC-USRYR "Owner year from the ID
AND OWNNO = SOUC-USRNO "Owner number from the I
AND FOLRG = 'O'."Output box
ENDSELECT.
IF SY-SUBRC NE 0.
" Error getting folder information for the user
MESSAGE E065(ZR53) WITH SY-UNAME.
P_RETURN_CODE = 1.
EXIT.
ENDIF.
ENDFORM. " SETUP_TRX_&_RTX_MAILBOXES
*& Form CREATE_AND_SEND_MAIL_OBJECT
FORM CREATE_AND_SEND_MAIL_OBJECT.
FOLDER_ID-OBJTP = SOFD-FOLTP. " the folder type ( usually FOL )
FOLDER_ID-OBJYR = SOFD-FOLYR. " the folder year ( usually 22 )
FOLDER_ID-OBJNO = SOFD-FOLNO. " the folder no.
OBJECT_TYPE = 'RAW'. " the type of object being added
* build up the object information for creating the object
OBJECT_HD_CHANGE-OBJLA = SY-LANGU. " the language of the email
OBJECT_HD_CHANGE-OBJNAM = 'PS to DM Interface'. " the object name
* mail subject 'Mass Linking of QA, pass/fail'
MOVE TEXT-002 TO OBJECT_HD_CHANGE-OBJDES.
OBJECT_HD_CHANGE-DLDAT = SY-DATUM. " the date of the email
OBJECT_HD_CHANGE-DLTIM = SY-UZEIT. " the time of the email
OBJECT_HD_CHANGE-OBJPRI = '1'. " the priority ( highest )
OBJECT_HD_CHANGE-OBJSNS = 'F'. " the object sensitivity
* F is functional, C - company sensitive
* object_hd_change-skips = ' '. " Skip first screen
* object_hd_change-acnam = 'SM35'. " Batch imput transaction
* object_hd_change-vmtyp = 'T'. " Transaction type
* add the text lines into the contents of the email
CLEAR OBJCONT.
REFRESH OBJCONT.
* free objcont. " added this to delete the mail contents records
LOOP AT T_MAIL_TEXT.
OBJCONT-LINE = T_MAIL_TEXT-STRING.
APPEND OBJCONT.
ENDLOOP.
CLEAR OBJCONT.
* build up the table of receivers for the email
REC_TAB-RCDAT = SY-DATUM. " the date to send the email
REC_TAB-RCTIM = SY-UZEIT. " the time to send the email
* the SAP username of the person who will receive the email
REC_TAB-RECNAM = D_USERNAME.
* the user type of the person who will send the email ( USR )
REC_TAB-SNDTP = SOUC-USRTP.
* the user year of the person who will send the email ( 22 )
REC_TAB-SNDYR = SOUC-USRYR.
* the user number of the person who will send the email
REC_TAB-SNDNO = SOUC-USRNO.
* the sap username of the person who will send the email
REC_TAB-SNDNAM = SY-UNAME.
* get the user info for the receiver of the document
SELECT SINGLE * FROM SOUC WHERE SAPNAM = D_USERNAME.
IF SY-SUBRC NE 0.
WRITE : / TEXT-001, D_USERNAME. "usnam.
EXIT.
ENDIF.
* the user number of the person who will receive the email ( USR )
REC_TAB-RECNO = SOUC-USRNO.
* the user type of the person who will receive the email ( USR )
REC_TAB-RECTP = SOUC-USRTP.
* the user year of the person who will receive the email ( USR )
REC_TAB-RECYR = SOUC-USRYR.
* the priority of the email ( highest )
REC_TAB-SNDPRI = '1'.
* check for delivery on the email
REC_TAB-DELIVER = 'X'.
* send express so recipient knows there is a problem
REC_TAB-SNDEX = 'X'.
* check for a return receipt
REC_TAB-READ = 'X'.
* the sap username of the person receiving the email
REC_TAB-ADR_NAME = D_USERNAME. "usnam.
* add this receiver to the internal table
APPEND REC_TAB.
CLEAR REC_TAB.
* call the function to create the object in the outbox of the sender
CALL FUNCTION 'SO_OBJECT_INSERT'
EXPORTING
FOLDER_ID = FOLDER_ID
OBJECT_HD_CHANGE = OBJECT_HD_CHANGE
OBJECT_TYPE = OBJECT_TYPE
OWNER = SY-UNAME
IMPORTING
OBJECT_ID = NEW_OBJECT_ID
TABLES
OBJCONT = OBJCONT
OBJHEAD = OBJHEAD
OBJPARA = OBJPARA
OBJPARB = OBJPARB
EXCEPTIONS
ACTIVE_USER_NOT_EXIST = 1
COMMUNICATION_FAILURE = 2
COMPONENT_NOT_AVAILABLE = 3
DL_NAME_EXIST = 4
FOLDER_NOT_EXIST = 5
FOLDER_NO_AUTHORIZATION = 6
OBJECT_TYPE_NOT_EXIST = 7
OPERATION_NO_AUTHORIZATION = 8
OWNER_NOT_EXIST = 9
PARAMETER_ERROR = 10
SUBSTITUTE_NOT_ACTIVE = 11
SUBSTITUTE_NOT_DEFINED = 12
SYSTEM_FAILURE = 13
X_ERROR = 14
OTHERS = 15.
IF SY-SUBRC NE 0.
MESSAGE A063(ZR53) WITH SY-SUBRC.
EXIT.
ENDIF.
* call the function to send the already created email to the receivers
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
FOLDER_ID = FOLDER_ID
OBJECT_ID = NEW_OBJECT_ID
OUTBOX_FLAG = 'X'
OWNER = SY-UNAME
TABLES
RECEIVERS = REC_TAB
EXCEPTIONS
ACTIVE_USER_NOT_EXIST = 1
COMMUNICATION_FAILURE = 2
COMPONENT_NOT_AVAILABLE = 3
FOLDER_NOT_EXIST = 4
FOLDER_NO_AUTHORIZATION = 5
FORWARDER_NOT_EXIST = 6
NOTE_NOT_EXIST = 7
OBJECT_NOT_EXIST = 8
OBJECT_NOT_SENT = 9
OBJECT_NO_AUTHORIZATION = 10
OBJECT_TYPE_NOT_EXIST = 11
OPERATION_NO_AUTHORIZATION = 12
OWNER_NOT_EXIST = 13
PARAMETER_ERROR = 14
SUBSTITUTE_NOT_ACTIVE = 15
SUBSTITUTE_NOT_DEFINED = 16
SYSTEM_FAILURE = 17
TOO_MUCH_RECEIVERS = 18
USER_NOT_EXIST = 19
X_ERROR = 20
OTHERS = 21.
IF SY-SUBRC EQ 0.
MESSAGE I035(ZR53) WITH NEW_OBJECT_ID D_USERNAME. "usnam.
ELSE.
MESSAGE I036(ZR53) WITH D_USERNAME." sy-subrc.
ENDIF.
ENDFORM. " CREATE_AND_SEND_MAIL_OBJECT -
Problem sending debug output to a syslog server
Hi,
i am having a problem when a tried to send the output from a debug command to my syslog server with the logging debug-trace command.
I already have a syslog server getting all the notification level logs from my ASA cluster.
When i enter the command debug fover fail, i can see on the terminal session all theoputput m,essgaes from that commnad, but when i type debug-trace, the debug messages disappear from monitor and they aren´t redirect to my syslog server. I analyze the traffic arriving to my syslog server with tcpdump, and the messages from the debug command are not being send to the syslog server.
I should say i also have a netflow collector active.
I attached the sh run logging output, maybe it can help:
logging enable
logging timestamp
logging standby
logging buffer-size 8096
logging monitor errors
logging buffered warnings
logging trap notifications
logging asdm errors
logging mail alerts
logging from-address xxxxxxx
logging recipient-address xxxxxxx level alerts
logging facility 16
logging host ADAM-MANAG 192.168.50.8
logging debug-trace
logging permit-hostdown
Could someone help me with this?
Thanks in advanceHi Gurpreet,
thank you very much for your reply.
When i enter the command logging trap debugging and logging debug-trace , I can see in my syslog server messages with the tag 711001 coming from the debug fover fail command, but I also get a bunch of other information i don´t want (all the debug level messages).
As far as I know, the debug-trace command redirect just the debug output from commands that you specifically enter in order to trace and debug a problem, but this is not the case, in order to make this work i have to enable the debugging trap level.
Is it something I am doing wrong , or I misunderstand?
Regards, -
How to send the output of a standard report
Hi Friends,
I came across an issue where I need to send the output list of the SAP standard report to an email ID .
Please, let me the the right way for doing this . or any useful information regarding this will be regarded.
Thanks
Prasead Kuse submit <program name>
convert data to tab delimited or excell file and use some email FM's and email it. -
How to send the output of the 1st BPEL process as a input to 2nd BPEL Proce
Hi,
I am working on OBPM 11G and my requirement is like below,
From Mediator we need to call two different BPEL process. 1st one is Synchronous one and second one will be a one way interface. We need to call a java call out from Mediator and then give the output to the first BPEL process. The output from the first BPEL process has to be given to the second BPEL process with a filter condition.
However we have achieved to call Java callout as well as call to two different BPEL process but facing issues in sending the output of the first BPEL process as a part of input to the second BPEL process.
Any help on this would be appreciated.
BibhuHi,
Why do you need the third step, if the second step is a Numeric Limit Test step type, you can setup the limits of this step for your required limits of 11V and 12V. Your result is returned from your VI to Step.Results.Numeric which will be evaluated in the Status Expression giving you a Pass / Fail status.
Look at the example TestStand\examples\demo\..\Computer Motherboard Test\computer.seq
But to answer your reoriginal question, some additional information is required.
What are your inputs and outputs assigned to in TestStand, do you use the Step properties, Locals, FileGlobals?
Regards
Ray Farmer
Regards
Ray Farmer -
How to send smartform output in body of email?
Hi all ,
I have to send smartform output in body of email (not as an attachement in mail) .PLease help me in this regard.
Thanks,
Ananth S.Hi Ananth
See these threads.
[https://forums.sdn.sap.com/click.jspa?searchID=23497094&messageID=6889194]
[https://forums.sdn.sap.com/click.jspa?searchID=23497094&messageID=6861330]
[https://forums.sdn.sap.com/click.jspa?searchID=23497094&messageID=6855364]
Regards
Hareesh Menon -
How can I send digital Output at faster rate than 1ms period?
Hi!
I'm using a PCI-6229 to send digital outputs to a power source and I need to send n different numbers in binary code. I need this to be periodic so I've used a while structure and the diferent numbers as the different components of an array. In this way the while loop writes the "task" repetedly at the period I have set to the loop using "wait until next ms multiple". So, it does what I want. The problem is that I need the loop to work at a higher rate than ms. It would be great if I could make it go at 0.01 ms. I have tried and even when the "wait until next ms multiple" doesn't like doubles it tries to work at this rate but the signal is not 100% periodic and I need it to be much more precise.
Does anyone have an idea to solve my problem?
Thanks a lot,
JúliaI think the example you want to look at is Digital - Continuous Output.vi. You can just use the onboard clock and set the sample rate to whatever you need (100kHz it looks like).
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
How to send ALV output data into Excel sheet format via Mail to the user?
Hi friends,
I have a doubt ie,
How to send ALV output data into Excel sheet format via Mail to the user?
regards
MoosaHi,
Provide the output internal table to the objbin in the below FM
Send Message
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = i_docdata
put_in_outbox = c_x
TABLES
packing_list = i_objpack
object_header = i_objhead
contents_bin = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
and specify the document type
i_objpack-doc_type = 'XLS'.
and try.
Regards,
Nandha -
'Send Print Request' button can send paystub output to R/3 print spool:
Hi
Portal Experts
Current state of the SAP environment on ECC 5.0 and EP 6 SP17
'Send Print Request' button can send paystub output to R/3 print spool:
When I clicked on send print request, I expected a printout to my default printer but didnt get one. If the dialog user has the 'print immediate' option turned off, their paystub will spool up in R/3. When a user clicks on the printer ICON within Adobe, they get to choose their printer and know that it will go straight to the printer. This could be confusing to R/3 dialog users.
Any solution,How to change the option from spool to print immediate.
Thanks
VanteruFacing the same problem.
Please let me know if you have found a solution. -
How to send the output to PDF format in reports 6i?
Hi,
How to send the output to PDF format in reports 6i? I given Mode = BITMAP.
DESTYPE = File, DESFORMAT = PDF, DESNAME = C:\x.pdf.
Report is running fine. But PDF file not generated. I don't know what i missed. Any one can help this?
Thanks
KavithaHello,
Do you get this problem only for DESFORMAT=PDF ?
Test with :
DESFORMAT = RTF, DESNAME = C:\x.rtf
or
DESFORMAT = HTMLCSS, DESNAME = C:\x.html
does it work ?
Check if DESNAME is modified in the reports itself.
Regards -
To send smartform output in an email without attachment
Hi All,
How to send smartform output in an email without attachment?
Thanks & Regards,
Mamta Gupta.Try this,
DATA:
ls_control_param TYPE ssfctrlop, "Control paramters
ls_output_options TYPE ssfcompop. "Output options
DATA:
lv_ip_mailaddr TYPE so_name, "Address of a Mail Recipient
lv_ip_type_id TYPE so_escape, "Recipient type
ls_recipient_id TYPE swotobjid, "Structure for recvr obj ID
ls_sender_id TYPE swotobjid. "Structure for sender obj id
CONSTANTS:
lc_ip_type_id TYPE so_escape VALUE 'U', "For internet address.
lc_smartform TYPE tdsfname VALUE 'ZVSF_ASN_DELNOTE', "Smart form name
lc_mail TYPE tddevice VALUE 'MAIL'. "Mail device
Assign recipient
lv_ip_mailaddr = gv_smtp_addr. "CSAM email id
lv_ip_type_id = lc_ip_type_id. "External address
Create Mail title
CONCATENATE text-001
nast-objky
INTO ls_output_options-tdtitle.
Create recipient object
CALL FUNCTION 'CREATE_RECIPIENT_OBJ_PPF'
EXPORTING
ip_mailaddr = lv_ip_mailaddr
ip_type_id = lv_ip_type_id
IMPORTING
ep_recipient_id = ls_recipient_id
EXCEPTIONS
invalid_recipient = 1
OTHERS = 2.
IF sy-subrc 0.
cf_retcode = sy-subrc.
PERFORM protocol_update.
ENDIF.
Get sender object id.
CALL FUNCTION 'CREATE_SENDER_OBJECT_PPF'
EXPORTING
ip_sender = sy-uname
IMPORTING
ep_sender_id = ls_sender_id
EXCEPTIONS
invalid_sender = 1
OTHERS = 2.
IF sy-subrc 0.
cf_retcode = sy-subrc.
PERFORM protocol_update.
ENDIF.
Assign the smart form name
w_ssfname = lc_smartform.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = w_ssfname
IMPORTING
fm_name = lf_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc 0.
cf_retcode = sy-subrc.
PERFORM protocol_update.
ENDIF.
For Print output:
IF nast-nacha = '1'. "Print output
ls_control_param-preview = 'X'.
ls_control_param-no_dialog = 'X'.
ENDIF.
For Email output.
IF nast-nacha = '2'. "Email
Output options
ls_output_options-tdteleland = gs_kna1-land1.
ls_output_options-tdtelenum = gs_kna1-telfx.
ls_output_options-tdfaxuser = sy-uname.
ls_output_options-BCS_COMMIT = 'X'.
ls_control_param-device = lc_mail.
ENDIF.
dynamically call Fm behind the Smart form
CALL FUNCTION lf_fm_name
EXPORTING
control_parameters = ls_control_param
mail_recipient = ls_recipient_id
mail_sender = ls_sender_id
output_options = ls_output_options
user_settings = ' '
TABLES
delivery = gt_delivery
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc 0.
cf_retcode = sy-subrc.
PERFORM protocol_update.
ENDIF.
Regards,
Joan
Maybe you are looking for
-
Dbua error wile upgrade from 9.5.0.5 to 10.2.0.4
I am upgrading from 9.2.0.5 to 10.2.0.4 i earlier tried to upgrade from 9.2.0.5 to 10.2.0.3, however it failed because of not applying patch- i then cloned the instance and installed 10g software,companion products,10.2.0.4. patchset. however when u
-
Brand new Mac mini ONLY displays when waking from sleep
Have an unusual problem. Brand new 2011 Mac mini. Turn it on, and I do not get the grey Apple logo screen or normal spinning cog. Light comes on as normal, and chime chimes as normal. I've tried three different monitors now and I never get a displ
-
Help with rsnapshot please (mysql)
Hello, I'm trying to configure rsnapshot to backup my server over ssh. I need to backup some directories and mysql dabase. So far I've got everything working but the mysql part. Its a bit unclear where the problem might be from the logs even with log
-
Hi, If I use Bootcamp and the Windows partition geta a virus, will it affect my Mac operating system or the harddrive? If so can I just uninstall the partition? Thank you.
-
Executing Procedures in sql Developer
Hi , I'm new to SQL Developer and trying to explore the tool . I have written a procedure as create or replace PROCEDURE SAMPLE2 AS studName Varchar2(8) ; BEGIN SELECT Stud1.NAME INTO studName FROM Stud1 WHERE Stud1.NAME = 'SOM'; END ; It has compile