Terminal Server using NM-16A

Hello,
I was trying to set terminal server using NM-16A module in Cisco 2651XM router but no luck. I did use 2511 in the past without any issue but i don't know if i'm not doing anything wrong with this module as i never set terminal server with this module before. Initially i thought my NM-16A is bad but when i do "sh ver" then router shows 16 Terminal Lines. All i get connection refused by remote host when i try to console other device even after clearing lines. Can anyone please help?
Thanks,

You may want to take a look at this doc:
http://www.cisco.com/en/US/docs/ios/interface/configuration/guide/ir_nm16as.html
It has been a while since I have used the async interfaces on a 25xx series device. I have used the async mod on a 2600 and aside from setting baud rate, parity, etc. I don't recall any special issues. I have one in my lab now, but apparently I have misplaced my async octopus cables. Which is a bit disconcerting.
Anyway, hope that helps.
Regards,
Bill
Please remember to rate helpful posts.

Similar Messages

Windows 7 Pro 64-bit to be used as a terminal server

Hello,
I'm looking at using a Windows 7 Pro 64-bit PC as a Terminal Server using an application such, as ThinStuff XP/VS (www.thinstuff.com), to manage the RDP connections. Based on everything I've read, it looks like there's no Terminal Server CALs available
for purchase through MicroSoft, so is there a need to worry about licensing? Each PC that connects will have it's own Windows 7 Pro valid license and, of course, the PC to be used is also valid. Are there any licensing concerns I should have?
Thank you for your help!

Hi,
To set up a terminal server, I suggest to set up a windows server system, Since Windows 7 is a client operating system and I do not suggest to use a third part software to modify its roles, especially the role or function related to the license. As for your
license concern, you can refer to the license agreement below Select your product name, version and language:
http://www.microsoft.com/en-us/legal/intellectualproperty/UseTerms/default.aspx
Regards
Wade Liu
TechNet Community Support

Use batch file to determine if computer is a terminal server

Hello experts,
I am trying to create a batch file that I can use to install MS Office 2013 and another software on Windows Server 2003 R2,
Windows Server 2008 R2, and Windows Server 2012 terminal servers (Remote Desktop Services) via GPO. The installation files are NOT
"msi" files. Can you please tell me how I can use command line in a batch or script file to determine if a machine is a terminal server or not? I tried the Change user /query command on a Windows Server 2008 R2
terminal server and a Windows 7 machine and both machines returned the following status
Application EXECUTE mode is enabled.
which will be a problem because the installation batch file would treat the Windows 7 machines as a terminal server when it's not really a terminal server.
Basically, I want the batch file to check to determine if the machine is a terminal server. If it is a terminal server, then it would run change user /install, install the software, reboot server, then run change user
/ execute. Your help will be greatly appreciated.

Hi,
For Office 2013 there should not be any concerns since it is windows installer based and things will be handled automatically. For the other software you could simply put the session in install mode in every case. For the servers/workstations
where install mode doesn't apply the change user /install and change user /execute will simply fail without any harmful effects.
You may check whether or not the machine is a terminal server using WMI, for example:
wmic /namespace:\\root\CIMV2\TerminalServices PATH Win32_TerminalServiceSetting Get TerminalServerMode
0 = Remote Administration mode (not a RDSH/TS)
1 = Application Server mode (aka RDSH/Terminal server)
-TP
When I run the command from the command line, it works, but when I try it in a "IF" statement, nothing happens. I am I doing something wrong using the wmic code in the IF statement?

Terminal server move to another server

Hello,
I have 2 windows server 2003 standart (terminal server) and I want to move these servers to another Windows server 2008 r2.
how I can migrate user profiles and folders? I look for USMT but usmt does not support windows server 2003. also I checked robocopy, it take error. I need advice. How I can do this goal with min. effort?

Hi,
The 2003 Terminal Server uses v1 user profile structure. The 2008 R2 Terminal Server uses v2 user profile structure.
Based on my experience, if they are local profiles, there is no out-of-box way to support the automatic migration. You may need to manually migrate the data into the new profile locations.
The following thread is discussing on the similar requirement:
Term Server 2003(32bit) migration to new Term Server 2008(64bit) box
http://social.technet.microsoft.com/Forums/en-US/winserverTS/thread/73268ddf-82fe-4274-abf5-3539670c7468
If they are roaming profiles, you can try the steps in the article below.
Support guidelines for migrating roaming user profiles data to Windows Vista or to Windows Server 2008
http://support.microsoft.com/kb/947025/en-us
Hope this helps.
Jeremy Wu
TechNet Community Support

Log in to Win2003 Terminal Server with LDAP credentials

I have a Mac network with Xservers running Tiger, LDAP doing all the authentications, and Ibooks (also Tiger) for the users. My users are mobile users if this matters. The Ad department needs to use the latest version of IE (6 or higher) to view certain websites that have active X stuff in them and that obviously is not available natively on Tiger. We have a Windows 2003 server (that is not doing anything yet) that can run Terminal Server for 5 people.
Is there a way I can have my users use the MS Windows Remote Terminal client software to access the terminal server using their same credentials from LDAP? They do not need any home directories or anything else fancy like that, just needs to say the Ad group can get in but the Market group can not. I have tried making the Xserver the primary domain controller (seems to work so far), I just want to do that with out the home directory binding stuff.
Budget keeps me from going to Parallels+XP and I have not found anything that will make Firefox or Safari able to see these types of sites.
Any hope?

I have a Mac network with Xservers running Tiger, LDAP doing all the authentications, and Ibooks (also Tiger) for the users. My users are mobile users if this matters. The Ad department needs to use the latest version of IE (6 or higher) to view certain websites that have active X stuff in them and that obviously is not available natively on Tiger. We have a Windows 2003 server (that is not doing anything yet) that can run Terminal Server for 5 people.
Is there a way I can have my users use the MS Windows Remote Terminal client software to access the terminal server using their same credentials from LDAP? They do not need any home directories or anything else fancy like that, just needs to say the Ad group can get in but the Market group can not. I have tried making the Xserver the primary domain controller (seems to work so far), I just want to do that with out the home directory binding stuff.
Budget keeps me from going to Parallels+XP and I have not found anything that will make Firefox or Safari able to see these types of sites.
Any hope?

Terminal Server Printing with OSX

We have a windows 2003 terminal server.
We have 10 remote powerbook users with OSX.
All the remote users have printers "without" postscript capabilities.
We want to remote access the terminal server, using RDP, and have the ability to print on the local users printers.
How can we achieve this. We can find no support for this anywhere on the web.
Need urgent assistance.
Thanks
shooshine

I'm not quite sure what you and your IT manager tried, so I'll try to restate myself.
If you don't have the ability to install printers "locally" on the server (many users are restricted to installing only "network" printers) then your IT manager should create a new local printer on the server and one of the default "ports" you can select is "Print to File". This is in the same dropdown list that includes LPT, USB, etc. As you continue through the printer configuration wizard you'll be asked to select a printer descirption. A "generic" Postscript description is fine for standard page sizes such as Letter, Legal, etc.
You would then (through RDC) open your document and print, selecting the "print to file" printer. You'll be asked where to save the .ps file. I suggest the Desktop so that it's easier to find.
Then you can open the "My Computer" icon where you'll see the C: drive, D: drive, etc., and (if you've configured your RDC client to share your Mac's local disk) a drive letter assigned to your Mac disk. Copy the .ps file to your Mac's disk, which will copy it to your Mac's hard drive.
The Preview application can open Postscript files and render them on-screen. Once you're this far, it's should be simplay a matter of printing to your locally attached printer or saving the file to a PDF or similar file format out of Preview.
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.9)

Terminal Server (2008 Standard) stops communicating randomly with printers. Have to reboot TS to temporarily fix issue.

I'm using Windows 2008 Standard, remoteApp feature to run applications at our branch offices (8 locations). All of our printers are HP laserjet printers (mainly 4015 model). All are setup as IP printers. The printers at each branch
are installed locally on the terminal server using the universal PCL5 driver. A majority of the time all works well. However, randomly a printer will change it's status to "offline" on the terminal server.
When that happens the printer itself is fine. Local users can print directly to the printer, and I can access the printer and print to it remotely.
From the terminal server however, it shows that printer as offline. I can't communicate with that printer from TS or even ping that printer's IP address. I can ping all other IP's at that branch, just not the one belonging to the printer from
TS. From any other computer besides the TS I can ping the printer's IP
It's not always the same printer/branch that does this, and there seems to be no pattern to when or where this happens, and I have to reboot the terminal server to get it to talk to that printer again.
Any insight into this or a way to fix it without bringing the terminal server down would be appreciated.

Hello,
Thanks for your feedback.
Based on the situation you described, I recommend you to use a typical solution for Windows Server 2008-based Terminal Server and Networking Printing:
Connect the printers to a Printing Server located in domains.
Install the often-used printers on the client sides, using Easy Print enabled drivers on the client sides.
When the client user remotely access the Terminal Server with Printer Redirection enabled, the client printer can be redirected and work seamlessly.
Most of the community members in this forum are using this solution and the result is satisfying. This method allow the users to print with the same printers both
in local and remote sessions. For more information on Easy Print, please refer to:
Terminal Services Printing
http://technet.microsoft.com/en-us/library/cc753853(WS.10).aspx
TechNet Webcast: Terminal Services Easy Print (Level 300)
https://msevents.microsoft.com/cui/WebCastEventDetails.aspx?culture=en-US&EventID=1032355423&CountryCode=US
Is this solution acceptable in your environment? Thanks.
Lionel Chen
TechNet
Subscriber Support in forum
If you have any feedback on our support, please contact
[email protected]
This posting is provided "AS IS" with no warranties, and confers no rights.

Office 2013 terminal server licensing

We need to install Office 2013 Pro+ on a MS terminal server. I've been reading around and have determined we need a volume license copy of O2013 and enough licenses for the number of desktops accessing it. Just a couple of questions...
Does O2013 have to be installed on the client desktop? If not, how does one install the license without installing O2013?
I have a user on a desktop in the office with O2013 installed and licensed. This user goes home and connects to the office network/terminal server using their home PC over a VPN. Do we need 2 licenses for this one user, one for the work PC and
one for the user's home PC?
Thanks!

This article, and the linked PDF "Licensing brief", should help:
http://www.microsoft.com/licensing/about-licensing/briefs/remote-desktop-services.aspx
Office does not have to be installed on a client desktop - even if you assign a license to that desktop just for the purpose of entitling Office-via-RDS at that desktop. E.g. if you used thin-clients or Linux instead of "full desktop Windows",
you can't install Office there, but if the device is used for Office-via-RDS, you must assign an Office license to that device.
You don't "install the license" - you assign a license (which is simply keeping records that you have "allocated" a license).
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Cisco 2811 with NM-16A as Terminal server.

Hello,
I am currently looking for a Cisco terminal server solution to remotely access through console my private Cisco home lab. I am thinking of buying Cisco 2811 but I struggle to figure out the difference which ASYNC/SYNC MODULE to use. So, my question, is it possible to use NM-16A module with Cisco 2811 or HWIC-16A module must be used? And what is the difference between them?
I found on Cisco website that NM-16A is not supported on Cisco 2811, however some forums stated that it is possible.
http://www.cisco.com/en/US/docs/ios/interface/configuration/guide/ir_nm16as.html#wp1027188
Your help is deeply appreciated.
Thank you,
Arik

Async is what you need.
I run this senario several places;
NAME: "chassis", DESCR: "2801 chassis"
PID: CISCO2801 ,
NAME: "WIC/VIC/HWIC 1", DESCR: "High Speed Wan Interface card with 16 RS232 async ports(HWIC-16A)"
PID: ,
NAME: "WIC/VIC/HWIC 3", DESCR: "9 Port FE Switch"
The HWIC is called HWIC-16A, but there is also a HWIC-8A
plus one or two CAB-HD8-ASYNC combo-squid-cables (green 1-to-8 with RJ45 plugs)
http://www.cisco.com/en/US/prod/collateral/modules/ps5949/ps6182/product_data_sheet0900aecd80274416.html
then you run rotary groups on the async SLIP's, via the cfg.
HTH
Martin

This copy of Microsoft Office 2013 cannot be used on a computer running Terminal Services" error message when you try to open the Click-to-Run version of an Office 2013 program or suite on a terminal server

Hi All,
I have Citrix VDI (Virtual Desktop Infrastructure) Implemented
in my company and installed few Applications on App Server lets say.... MS Office 2013, filzialla, putty, etc...
I assigned these apps to the users through CITRIX STUDIO, when I try to use these apps. on VDI everything is working fine only when i tried to open Word, Excel or Powerpoing, outlook it throws error as
""This copy of Microsoft Office 2013 cannot be used on a computer running Terminal Services" error message when you try to open the Click-to-Run version of an Office 2013 program or suite on
a terminal server"" and apps gets closed.
Please help me on this ASAP.
Thanks & Regards,
Sachin Shinde

Hi,
As mentioned in ths article below, run for Office 365 products on to a Remote Desktop Session Host server is not supported. You can install Office products for Office 365 to a virtual desktop, but the virtual desktop must be assigned to a single user.
http://technet.microsoft.com/en-us/library/jj219423(v=office.15).aspx
Regards,
Melon Chen
TechNet Community Support

Installing terminal server role on windows server 2012 to use for Windows server 2008 R2 machines.

Dear
Our current setup is as follows :-
Active Driectory is in Windows Server 2003.
Citrix Xenapp version 5.6 with all Xenapp servers in Windows Server 2003
Now we are upgrading our Citrix farm to 6.5 and all Xen app servers into Windows Server 2008R2.
We did the configuration and testing; everything works fine except the terminal server is not configured which gives the pop always for the expiry date.
We do have license for 2012 terminal server which is not possible to downgrade for some reason and managent need to install new Windows Server 2012 for terminal server and activte the licenses.
My question is :-
1 Whether Windows Server 2008 R2 will get RDS cal license from Windows Server 2012 terminal server (RDS CAL license is of windows server 2012).
2. What is the role and features I need to activate in Server 2012 in order to use for Citrix 6.5 (only applicable fetaure for getting the RDS cal license.)
3. Whether I can add this 2012 server into domain. Is it possible to add 2012 server into Windows Server 2003 AD.
Your early reply is highly appreciated.

Thanks Jeremy..
I got exactly the right answers I am lookoing for ..
I successfully activated the terminal service on the newly created Windows 2012 Server and installed the retail license pack we had of 50+50+25 keys . It later shows the 125 keys successfully applied.
when I tried to link the Xenapp (Windows Server2008R2) to the license server, it first gives me error that session host service role is not installed on the ternial server. So I installed that role also in the terminal server.
But now its anothee error as below.
RDS Cals are not available for this Remote Desktop Session host server, and licensing Diagnostic has identified licensing problems for the RD session host server.
1. Is it wrong I did by installing session host server role into the terminal server (but really it gave me error like 'session host server role is not running on the license server' when I tried to link the license server).
2. Is it the problem that Windows Server 2008 R2 will not get license from 2012 RDS CAL license.
3. whether Clearing house will take time to update the license.
Your reply is highly appreciated. I need to know whether any other way I can link the Windows Server 2008 R2 Servers (Xenapp) to the license server.

2611xm Terminal Server + ACS + duplicate login when using menu options

Hi,
I'm trying to set up ACS on my 2611xm router, so far I have been able to do this, however when you login,
I have a autocommand setup to run a menu. My problem is when you select the option on the menu it
reauthenicated against the router again before connecting to the line, can any one tell me how to stop this from happening.
Thanks for your time and effort in advance, I have enclosed a config below.
DDRAS01#sh running-config
Building configuration...
Current configuration : 6854 bytes
! Last configuration change at 10:28:49 AEST Sun Feb 21 2010 by <removed>
! NVRAM config last updated at 19:25:53 AEST Sat Feb 20 2010 by <removed>
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
service linenumber
service sequence-numbers
hostname DDRAS01
boot-start-marker
boot-end-marker
security authentication failure rate 3 log
security passwords min-length 6
logging buffered 51200 informational
logging rate-limit all 10000
logging console critical
enable password 7 <removed>
aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication login if_needed local
aaa authentication enable default enable
aaa authentication ppp default local
aaa authorization exec default group tacacs+ local if-authenticated
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa session-id common
clock timezone AEST 10
clock summer-time AEST recurring last Sun Oct 2:00 last Sun Mar 3:00
no network-clock-participate slot 1
no network-clock-participate wic 0
ip cef
ip domain list <removed>
ip domain list <removed>
ip domain name <removed>
ip host dd-cr-01e 2033 172.16.1.1
ip host ddsws01 2034 172.16.1.1
ip host ddsws04 2035 172.16.1.1
ip host ddce565 2040 172.16.1.1
ip name-server <removed>
ip name-server <removed>
username netops privilege 15 password 7 <removed>
ip ssh source-interface FastEthernet0/0
ip ssh logging events
ip ssh version 2
interface Loopback0
ip address 172.16.1.1 255.255.255.255
interface FastEthernet0/0
ip address <removed> 255.255.255.0
speed 100
full-duplex
interface Serial0/0
no ip address
shutdown
interface BRI0/0
no ip address
encapsulation hdlc
shutdown
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 <removed>
ip http server
no ip http secure-server
ip tacacs source-interface FastEthernet0/0
ip radius source-interface FastEthernet0/0
logging facility local6
logging <removed>
snmp-server community <removed> RO
snmp-server community <removed> RW
snmp-server location <removed>
snmp-server contact NetOps
menu ddras01 title ^C
Cisco Terminal Server
Select the number from the list below
Use 'ctrl+shift+6' then 'x' to switch back to the menu
^C
menu ddras01 text 1 Connect to DD-CR-01
menu ddras01 command 1 resume dd-cr-01 /connect telnet dd-cr-01 2033
menu ddras01 text 2 Connect to DDSWS01
menu ddras01 command 2 resume ddsws01 /connect telnet ddsws01 2034
menu ddras01 text 3 Connect to DDSWS04
menu ddras01 command 3 resume ddsws04 /connect telnet ddsws04 2035
menu ddras01 text 8 Connect to DDCE565
menu ddras01 command 8 resume ddce565 /connect telnet ddce565 2040
menu ddras01 text 9 Exit
menu ddras01 command 9 menu-exit
menu ddras01 clear-screen
menu ddras01 status-line
menu ddras01 line-mode
tacacs-server host 10.2.0.50
tacacs-server directed-request
tacacs-server key 7 <removed>
control-plane
privilege exec level 15 write terminal
privilege exec level 15 write
privilege exec level 1 ping
privilege exec level 10 undebug ip icmp
privilege exec level 10 undebug ip
privilege exec level 10 undebug all
privilege exec level 10 undebug
privilege exec level 10 terminal monitor
privilege exec level 10 terminal
privilege exec level 15 show running-config
privilege exec level 5 show configuration
privilege exec level 5 show
privilege exec level 10 debug ip icmp
privilege exec level 10 debug ip
privilege exec level 10 debug all
privilege exec level 10 debug
privilege exec level 10 clear interface
privilege exec level 10 clear counters
privilege exec level 10 clear
line con 0
password 7 <removed>
logging synchronous
line 33 64
no exec-banner
exec-timeout 0 0
no activation-character
no exec
transport preferred telnet
transport input all
escape-character 27
stopbits 1
flowcontrol hardware
line aux 0
line vty 0 4
password 7 <removed>
logging synchronous
autocommand menu ddras01
line vty 5 181
password 7 <removed>
logging synchronous
autocommand menu ddras01
ntp clock-period 17208487
ntp source FastEthernet0/0
ntp server <removed>
end

Hi,
I'm trying to set up ACS on my 2611xm router, so far I have been able to do this, however when you login,
I have a autocommand setup to run a menu. My problem is when you select the option on the menu it
reauthenicated against the router again before connecting to the line, can any one tell me how to stop this from happening.
Thanks for your time and effort in advance, I have enclosed a config below.
DDRAS01#sh running-config
Building configuration...
Current configuration : 6854 bytes
! Last configuration change at 10:28:49 AEST Sun Feb 21 2010 by <removed>
! NVRAM config last updated at 19:25:53 AEST Sat Feb 20 2010 by <removed>
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
service linenumber
service sequence-numbers
hostname DDRAS01
boot-start-marker
boot-end-marker
security authentication failure rate 3 log
security passwords min-length 6
logging buffered 51200 informational
logging rate-limit all 10000
logging console critical
enable password 7 <removed>
aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication login if_needed local
aaa authentication enable default enable
aaa authentication ppp default local
aaa authorization exec default group tacacs+ local if-authenticated
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa session-id common
clock timezone AEST 10
clock summer-time AEST recurring last Sun Oct 2:00 last Sun Mar 3:00
no network-clock-participate slot 1
no network-clock-participate wic 0
ip cef
ip domain list <removed>
ip domain list <removed>
ip domain name <removed>
ip host dd-cr-01e 2033 172.16.1.1
ip host ddsws01 2034 172.16.1.1
ip host ddsws04 2035 172.16.1.1
ip host ddce565 2040 172.16.1.1
ip name-server <removed>
ip name-server <removed>
username netops privilege 15 password 7 <removed>
ip ssh source-interface FastEthernet0/0
ip ssh logging events
ip ssh version 2
interface Loopback0
ip address 172.16.1.1 255.255.255.255
interface FastEthernet0/0
ip address <removed> 255.255.255.0
speed 100
full-duplex
interface Serial0/0
no ip address
shutdown
interface BRI0/0
no ip address
encapsulation hdlc
shutdown
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 <removed>
ip http server
no ip http secure-server
ip tacacs source-interface FastEthernet0/0
ip radius source-interface FastEthernet0/0
logging facility local6
logging <removed>
snmp-server community <removed> RO
snmp-server community <removed> RW
snmp-server location <removed>
snmp-server contact NetOps
menu ddras01 title ^C
Cisco Terminal Server
Select the number from the list below
Use 'ctrl+shift+6' then 'x' to switch back to the menu
^C
menu ddras01 text 1 Connect to DD-CR-01
menu ddras01 command 1 resume dd-cr-01 /connect telnet dd-cr-01 2033
menu ddras01 text 2 Connect to DDSWS01
menu ddras01 command 2 resume ddsws01 /connect telnet ddsws01 2034
menu ddras01 text 3 Connect to DDSWS04
menu ddras01 command 3 resume ddsws04 /connect telnet ddsws04 2035
menu ddras01 text 8 Connect to DDCE565
menu ddras01 command 8 resume ddce565 /connect telnet ddce565 2040
menu ddras01 text 9 Exit
menu ddras01 command 9 menu-exit
menu ddras01 clear-screen
menu ddras01 status-line
menu ddras01 line-mode
tacacs-server host 10.2.0.50
tacacs-server directed-request
tacacs-server key 7 <removed>
control-plane
privilege exec level 15 write terminal
privilege exec level 15 write
privilege exec level 1 ping
privilege exec level 10 undebug ip icmp
privilege exec level 10 undebug ip
privilege exec level 10 undebug all
privilege exec level 10 undebug
privilege exec level 10 terminal monitor
privilege exec level 10 terminal
privilege exec level 15 show running-config
privilege exec level 5 show configuration
privilege exec level 5 show
privilege exec level 10 debug ip icmp
privilege exec level 10 debug ip
privilege exec level 10 debug all
privilege exec level 10 debug
privilege exec level 10 clear interface
privilege exec level 10 clear counters
privilege exec level 10 clear
line con 0
password 7 <removed>
logging synchronous
line 33 64
no exec-banner
exec-timeout 0 0
no activation-character
no exec
transport preferred telnet
transport input all
escape-character 27
stopbits 1
flowcontrol hardware
line aux 0
line vty 0 4
password 7 <removed>
logging synchronous
autocommand menu ddras01
line vty 5 181
password 7 <removed>
logging synchronous
autocommand menu ddras01
ntp clock-period 17208487
ntp source FastEthernet0/0
ntp server <removed>
end

Using Cisco Router as terminal server

Dear Experts,
I would like to use Cisco 2800 Router as terminal server. I use 2T-WIC (Serial) in asynchronous mode, while the remote computer connects to router's port by dial up, using PPP protocol get IP address and access the network. What configuration should be set in router in order to implemented such service. Should any authentication be implemented and if so, what is the right setup?

Hi
From your explaination, I assume that you want the router to be a dial-in access server for your HARDDISK client (not diskless).
username cisco password cisco
int e0
ip add
interface Serial 0
physical-layer async
ip unnumbered Ethernet 0
async mode dedicated
dialer rotary-group 1
interface Dialer 1
ip unnumbered Ethernet 0
encapsulation ppp
dialer in-band
dialer-group 1
ppp authentication chap
peer default ip address pool test
ip local pool test
line 1
exec
autoselect ppp
autoselect during-login
login local
modem InOut
transport input all
stopbits 1
speed 38400
flowcontrol hardware
Hope that will help.
Pls rate helpful posts.
Regards
JD

After using WMIquery to listen Creation/Deletion of one process makes CPU usage to 100 % at remote terminal server

Hi there ,
I am new to the WMI and stuck with max CPU usage .
I have to open my plugin(MakeyourVoice.exe )
as MyAPP.exe process starts by a windows user. For hearing
the start of MyAPP.exe in processes space ,I have created the WMIquery in watcher.exe and query
used as
scope =
new ManagementScope(String.Format("\\\\{0}\\root\\CIMV2", “localhost”),
null);
scope.Connect();
wmiStartQuery =
new
WqlEventQuery("__InstanceOperationEvent",
new TimeSpan(0, 0, 1),
"TargetInstance ISA \"Win32_Process\" AND TargetInstance.Name=\"MyAPP.exe\" ");
ManagementEventWatcher StartWatcher =
new ManagementEventWatcher(scope, wmiStartQuery);
// register for WMI event within the scop
StartWatcher.EventArrived +=
this.WmiEventHandler;
// Start Watcher
StartWatcher.Start();
Now the problem is if I run my watcher process in Remote Terminal Server (Windows Server 2008 R2 Standard) with 5-6
number of users logged in the CPU usage shoot up to 100 %.Due to this users cannot do any activity on system.
Could you please suggest how can I solve this issue, so that users can use my plugin?
Thanks in advance..

Hi Sharma,
Please seek help from
Scripting forum or else wait until any of our moderator move this post to concerning forum.
Thank you for understanding.
Regards, Ravikumar P

Getting client name using userenv('terminal') when use of TERMINAL SERVER

Hi all,
Is there any way we can get client computer name when we use terminal server. userenv('terminal') giving server name only. How can I get client computer name.
Thanks in advance

the report-forum is here :
Reports

Terminal Server using NM-16A

Similar Messages

Maybe you are looking for