Termination Issues in VL01N reference with Sales Order

Hi Group,
we were facing issues while creating the Delivery(VL01N) with reference of the Sales Order and getting an Express termination message as under:
'Enter a Batch'.
we found information with tcode 'SM13' with the Function module 'RV_MESSAGE_UPDATE'.
kindly provide your valuable inputs.
Regards,
Vishnu

There can be various reason for these kind of termination. Normally this due Number range overlapping or Object requested is currently locked by some other user. If you have used TCode SM13. Then you might have checked the reason why the 'Termination' Message appeared. So, there you can check ABAP run time errors is cause. If you can post :
- Status
- Class (mandatory)
- Number (mandatory)
- Error Details
In that case, we will be in better position to assist you.
Regards
JP

Similar Messages

BAPI for Outbound Delivery Creation with reference to Sales Order - VL01N

Hi Everybody,
 We are in ECC 5.0 version.
 I want to create a enhancement for Outbound Delivery Creation with reference to a Sales Order.
 Is any BAPI available for this ?
 Any input on this will be very much helpfull.
 Please suggest any BAPI available for this, or should I go for BDC using VL01N or VL04 ?
 Thanks in advance.
regards,
Nagarajan.J

Hi Nagarajan,
The BAPI BAPI_DELIVERYPROCESSING_EXEC meets your requirement. You can create delivery with reference to sales order.
The below is the sample code...
data:lt_request like bapideliciousrequest
 occurs 0 with header line,
 lt_createditems like bapideliciouscreateditems
 occurs 0 with header line,
 lt_return like bapiret2
 occurs 0 with header line.
 lt_request-document_type = 'A'.
 lt_request-document_numb = vbeln.
 lt_request-document_item = posnr.
lt_request-material = matnr.
lt_request-plant = werks.
lt_request-stge_loc = lgort.
lt_request-quantity_base__uom = base_uom_qty.
lt_request-delivery_date = sy-datum.
append lt_request.
call function 'BAPI_DELIVERYPROCESSING_EXEC'
EXPORTING
 DELIVERY_EXTEND =
 TECHN_CONTROL =
 tables
 request = lt_request
 createditems = lt_createditems
 return = lt_return.
loop at lt_return where type = 'A'
 or type = 'E'.
 exit.
endloop.
if sy-subrc <> 0.
Use the BAPI for Commit
 call function 'BAPI_TRANSACTION_COMMIT'
 exporting
 wait = 'H'.
endif.
Thanks
Ramakrishna

Sales order with reference to sales order

Hi,
 I need to create a sales order with reference another sales order using bapi CreateFromDat2. Please note, Sales Ord. Dist. channel, Div, sold-to to of the new order are different from original order. I gave reference order in field order_header_in-REFDOCTYPE . I am getting following error when I perform single test " FB Call: insufficient parameters. Can any of you tell me how to overcome this issue. And is it possible to create an order refering to another Saler order with different Sales Ord, Dist. channel, Division, sold-to ?
<REMOVED BY MODERATOR>
Cheers
Sudhaker
Message was edited by:
 Alvaro Tejada Galindo

There is an OSS note <a href="https://service.sap.com/sap/support/notes/370988">Note 370988 - BAPIs in SD: Creation with reference</a>
Symptom
This note describes the problems of the 'Create with reference' function when using BAPIs to create sales documents.
If you are working online, you can use this function module to create a sales document with reference to an existing sales document or a billing document (for example, a debit or credit memo request) according to fixed rules. The rules for transferring information from the source document to the target document are defined in the copying control on header and item level. The creation with reference permits an item selection.
When you use BAPIs in SD, a function of this type is not fully available. A reference is only possible for a quantity contract, so that the target quantity of the contract can be reduced by the order quantity of the sales document. Furthermore, the document flow is also updated.
As an alternative to 'Create with reference' in Transaction VA01, two variants are provided for solving the 'Create with reference' problem in the BAPI.
 1. Create a '1:1 ' - that is, a document copy of a sales document (customer quotation, order) with 'BAPI_SALESDOCUMENT_COPY'. At this point, you cannot create the 1:1 copy of either a billing document or a delivery.
 2. Create a sales document that refers to an existing document with 'BAPISDORDER_GETDETAILEDLIST' and 'BAPI_SALESORDER_CREATEFROMDAT2'.
Other terms
BAPI_SALESDOCUMENT_COPY, BAPI_SALESORDER_CHANGE, BAPI_CUSTOMERINQUIRY_CHANGE, BAPI_CUSTOMERQUOTATION_CHANGE, BAPI_SALESORDER_CREATEFROMDAT1, BAPI_SALESORDER_CREATEFROMDAT2, BAPI_SALESORDER_CREATEFROMDATA, BAPISDORDER_GETDETAILEDLIST
Reason and Prerequisites
As of yet, no method exists for creating a sales document that refers to an existing document.
Solution
For solution No. 1
 1. Create the documents using the BAPI_SALESDOCUMENT_COPY function module. However, this only permits a 1:1 copy without factoring out individual items.
 2. After you have created the document copy, you can use a change BAPI to edit this copy.
For solution No. 2
 1. Collect the data for the reference document (for example a customer quotation) with the 'BAPISDORDER_GETDETAILEDLIST' function module. In the example code, focus exclusively on the partners, items, schedule lines and conditions.
 2. Prepare the Data. Execute the 'copying control' manually. This way, you decide which values are to be transferred.
 3. Create the sales document using the 'BAPI_SALESORDER_CREATEFROMDAT2' function module by transferring the prepared data.
 4. Finally, you must remove a COMMIT WORK so that the sales document can be written into the database.
An example of solution 2 is attached as a text file. You are allowed to select items and quantities for example, if you use input parameters. If there are no entries, then transfer 1:1 from the reference document. When you enter the 'condition type' parameter, you can determine whether conditions are copied or recalculated ('G' for transferring from the preceding document; 'B' or ' ' for re-determining, and 'C' for re-determining with transfer of the manual elements).
Sample : <a href="https://websmp108.sap-ag.de/~sapidb/012003146900000486112004E/BAPI_COPY_WITH_REF.txt">ZZ_MS_BAPI_COPY</a>
Regards

BAPI for Outbound Delivery Creation with reference to Sales Order

Dear all,
I'm on R/3 4.6B platform and to develop an RFC for outbound Delivery creation instead of using the standard VL01N transaction.
I've review BAPI for Outbound Delivery Creation with reference to Sales Order - VL01N thread which suggest BAPI_DELIVERYPROCESSING_EXEC .
However, in 4.6B, that function module doesn't exist. Appreciate any suggestion and or workaround.
Thanks.
Steven
Edited by: Steven Khoo on Mar 25, 2010 7:13 AM
Edited by: Steven Khoo on Mar 25, 2010 7:14 AM

Not required anymore

Transfer Stock to subcontractor with reference of Sales order

Hi,
Scenario:
MTO strategy
We have one operation is subcontracting. When we take MRP run all PurReq. & PLOrd are reference to sales order. But when we want to transfer material to subcontractor through TCode MB1B Mvt type 541 that time system issue the following message.
Deficit of SL Unrestricted-use 3,150 KG : 119 1002 RM
Then we have to transfer stock reserved against sale order to unrestricted.
Requirement:
Can we transfer stock to subcontractor with reference to sales order.
Pl tell me how I resolved this issue.
Thanks & Regards
Dhamane

Hello....
You can not transfer material from Sales order Stock by movement type 541 as both stocks are Special stocks & has not recommend to transfer between two special stocks.
For this Solution , Transfer posting to transfer the provided components to a new storage location (for example, 9999) by using movement type 311. This enables you to obtain an overview of those stocks that are physically located at the subcontractor. This information is particularly important when you carry out a physical inventory of the sales order stocks.
Rajiv

Create delivery with sales order reference.

Dear all,
       I created a sales order with sales area (1000,10,00) and order type(or).
       when i am creating a delivery with sales order reference , error is occurring.
error:(Order cannot be delivered (see long text)).
       plz solve the problem urgent.
                                      Regards,
                            v.mallikharjuna rao.

Hi,
You must do the PGI before creating the delivery. Please follow the below mentioned procedure carefully and you will be able to do that.
Once you create a Sales order, go to the transaction VL01 and do the PGI. To do PGI (from transaction VL01), in the menu, go to Outbound Delivery->Save and Subseq.Func->Transfer order. This will take you to Transfer order transaction. click on Generate TO and save. Now return to transaction VL02 and click on Post Goods Issue. This will do the PGI and save the Delivery document. Now go to VF01 and you will have the delivery number just created as a line item. Select it and click on execute button. Save once the execution is done and a Billing doument (invoice) is created. Now if you go to the sales order and click on document flow all these documents will be displayed.

Unable to create PO with reference to sales order

Hi All,
While creating a PO with reference to sales order, we are getting an error message as below
"Error while determining local currency exchange rate type AB45 date 30.06.2010 from EUR to SEK"
In T.code: OB08, We observed that exchange rates have been maintained for the above combination
i.e. AB45 is a exchange rate key for our customer.
exchange entries have been already maintained in OB08,
Please suggest a solution to resolve this issue.
Regards,
Prasad

Hello,
While creating a PO with reference to sales order, we are getting an error message as below
"Error while determining local currency exchange rate type AB45 date 30.06.2010 from EUR to SEK"
In T.code: OB08, We observed that exchange rates have been maintained for the above combination
i.e. AB45 is a exchange rate key for our customer. exchange entries have been already maintained in OB08,
Please suggest a solution to resolve this issue.
Since you have maintained the setting in OB08, please refer to below link which has the same subject matter.
[HELP LINK !!|Error determining local currency]
Regards,
Sarthak

Issue with sales order stock that is referencing a non-existing sales order

We have an issue with sale order stock.
Due to user error we have ended up with a negative quant of sales order stock in a bin. Further the error was due to mis-keying of sales order number. Hence this negative quant is referencing a sales order that does not exist.
We need to get rid of this quant.
I thought of cycling this quant off as a solution. And hence replicated the scenario in the test system. I was able to create a TO to cycle it off but cannot clear the differences from 999 . The error I get while trying to do this is "SD document not in database or has been archived" . This error is true since the sales order actually does not exist. So cycling it off did not work.
Can anyone suggest how we can get rid of this negative quant of sales order stock ?
Thanks

Hi,
You said that your user mistyped the SO number and it resulted in a -quant. In which transaction was it possible? If I give a non existing no. SAP doesn't allow me to book.
If I were you I would check both in WM & IM what the user had done...step-by-step...
Negative quant comes to existance in interim storage type if we book e.g. a GI. It should have started in IM...how was your user be able to do that??? If it was possible cannot you reverse the IM booking?
(...if all else fails...cannot you create a SO document with external number assignment with the same number?...)
BR
Csaba
Edited by: Csaba Szommer on Jun 24, 2008 8:31 PM

Delivery note with reference to sales order - 0 quantity items

Hi all,
our system allows items with quantity 0 to be created in delivery notes with reference to sales orders.
This happens when some items in a sales order are out of stock while others are availiable. The unavailable items are included in the delivery note, but have quantity 0.
The requirement is to eliminate this behavior and to create delivery notes with availiable items only.
I would be grateful for any advice how to realise this.
Best regards, Andreas

Make the necessary configuration i.e. Check quantity 0 field value should be maintained as B in the respective delivery item category using transaction 0VLP.
Regards,
GSL.

Creation of Sales Delivery with reference to Sales Order

Hi SAP Team,
I tried making a Delivery with reference to Sales Order. Though in Item Category detemination of Delivery configuration, a separate
Item Category has been configured, but still System picks up the one in Sales Order. Is there a way to get different Item Category at Delivery level.
Also, for Subitems a different Item Category is proposed, but still it follows the same behaviour, which is at header level.
Is there any way to change it.
regards

Hi,
Maintain the required values in the T.Code "0184".
Or follow the path:
SPRO>Logistics Execution>Shipping>Deliveries>Define Item Category Determination in Deliveries.
You have maintained the similar values for your delivery type same as sales order type that were maintained in "VOV4" T.Code.
So that it getting the item category same as the sales order.
Change the values here,so that new item categories will be appeared in delivery.
Regards,
Krishna.

Creation of production order with reference to sales order

dear all guru's,
i m having a requirement of creating production order with ref to sales order but without changing my old strategy of make to stock.
regards
ujwal

Hi,
For the purpose of creation of production order with reference to sales order while maintaing MTS strategy you need to maintain Make to stock strategy 40 in strategy group in MRP-3 View of Material Master.
This is the only Make-to-Stock Strategy which enables you create Production Order against both Sales order as well as Demand / PIR.
So if your strategy group is already 40 then you need not change it.
However if you are using any other Make-to - Stock strategy like 10, 11 etc. then it is not possible to create Production Order against Sales Order since they dont consider Sales Order in planning.So you need to change them and set strategy group as 40.
Hope this helps.
Revert if you have any doubt.
Regards,
Tejas
Edited by: Tejas Pujara on Sep 27, 2008 8:50 AM

Enable - Create With Reference in Sales order

Hi All,
I want to enable - Create With Reference in Sales order
We have 1 billing doc type YX1 to be used as reference for a sales order type ZX3
How to enable Create with reference from Sales Document type YX1 to Sales Document type ZX3.
Currently, I am getting error 'Copying from sales document type YX1 to ZX3 is not supported'.
Please let me know the steps to be followed.
Thank you!
Regards,
Shanu Jain

Hi,
The error clearly suggests that there is no copy control maintained b/w invoice YX1 and sales order type ZX3. You need to maintain that in SPRO > Sales and Distribution > Sales Documents > Copy control for sales documents. (You may check the correct node here). Here, you select the billing document to sales document.
Check for source and destination. You can take the source as F2 and CR (if ZX3 is a credit Memo request) as Destination document. You can copy the same and change the source and destination as YX1 as source and ZX3 as destination. Then, at the item level, if you have a new item category you can specify it as the 'Proposed Item Category'. Save it.
Now try to create the sales document ZX3 w.r.t YX1... It should work.
Hope this helps
Thanks
Mukund S

Purchase order with reference to Sales Order

Dear SAP Gurus,
I want to create a Purchase Order with reference to sales order.
I want to take the material in my stocks also. If i create a Purchase order with account assignment, i am able to take the inventory of that material as it is consumed at the time of GR (MIGO).
hope you understand my requirement.
Ashish

Hi
Go to SPRO->Logistic general->Tax on goods movement->India->Movement types.
Here you will find the group of movement types check which movement types is mantained for the out side movement groups or inward movement.
also check the Material Master in MRP view if the collective requirements (02) is mantained.
Regards
Sri

Creation of IBase with reference to sales order for Configurable product.

Hi Experts,
Can any one tell me How to create Ibase with reference to sales order for Configurable Products. I know we can create this using IB63, but what i need to do in this Transaction code and what settings i need to do in SPRO.
pls send ur replies to [email protected]
Thank you..

Hi
You can create IBase using T-Code-IB53 and in there you can give Parent and child products.
A)Define Installed Base Category and Installation Rules-CRM
B)Define Object Families
C)Define default settings for equipment replication
D)Define Serial Number Profiles-ECC
E)Txn BF31-ECC
F)Set up attributes for individual objects
G)Set up set types
H)Set up category
I)Set up views
J)Allow reference product for IO
I hope it helps
If you require further help let me know.
Cheers
Raj

Error During Delivery creation with reference to Sales order

Hi all,
I am confused while creating delivery order with reference to sales order as this error *" Number of copying routine for table VBKD is missing in Table TVCPL"* is coming again and again.
I have perhaps made all possible things in VTLA ( Copy sales doc to delivery doc) but still i m finding it difficult to remove it
Please guide me in it.

Hi,
You will need to make assignment from So item to Delivery item please check if copy control is maintained at item level. Also make sure that Copy controls are maintianed for the billing document from the SO & Delivery both as this would be the next step.

Termination Issues in VL01N reference with Sales Order

Similar Messages

Maybe you are looking for